Replies continued
CrankyOldManWest Michigan · Dec 6, 2011#51 Originally Posted by
Jason@SportsCar ↑ It wont be "freeway friendly", but damn, it will get you there in a hurry.
Agreed. My spreadsheet shows it as almost 4200 RPM@70 mph!
Originally Posted by
Jason@SportsCar ↑ Wait till Cranky starts running the numbers, his head should be spinning.
I'm drooling a little bit, and putting off some homework.
Originally Posted by
cali yaris ↑ ok, so final drives: 3.7 stock, 4.0 (pricey), 4.2 (xB), 4.5 (pricey)
4.0 = the early < '03 C59 3.941:1? If so, that's from a 1st gen Matrix (I think).
4.5:1 = ??
There's also a TRD 4.733:1 from the Starlet/Truino that may or may not fit.
cali yarisThread starterCanoga Park, CA · Dec 6, 2011#524.0 and 4.5 are brand new from Japan. [insert banana dance smiley here]
Flipper_1938Kentucky · Dec 6, 2011#53So, did you try this out on a dragstrip? What was your E.T? How much did you trim off of your previous best time?
cali yarisThread starterCanoga Park, CA · Dec 7, 2011#54I swapped the xB final drive only, not the gear sets. Jason is putting the gear sets into their road course race cars, that's not drag racing.
I got 2 passes and broke my clutch 3 weeks ago. I'm going again on Thursday night this week. Hope to have some good results.
Vic-2NZFEPanama · Jan 20, 2012#55any word on this? how did it go?
docBWestern N.Y. · Jan 20, 2012#56i guess this isn't for street cars? How do you reprogram the speedo?
doc
cali yarisThread starterCanoga Park, CA · Jan 20, 2012#57 i guess this isn't for street cars?
Sure it is -- but it depends on your tolerance for high revs on the freeway. Otherwise, it improves the Yaris' performance value a LOT.
How do you reprogram the speedo?
You don't. As far as I can tell, it didn't change that. Aren't the speed sensors at the wheels?
any word on this? how did it go?
I haven't drag raced again since then, sorry. 🙁
Bluevitz-rsOshawa, Ontario, Canada · Jan 21, 2012#58The output for the speed sensor is read off of the final drive assembly. But you aren't spinning the FD any faster because your wheels aren't turning any faster at the same speed. It's all the other gear before the FD that change speed. (I hope that makes sense to you all)
CrankyOldManWest Michigan · Jan 21, 2012#59 Originally Posted by
cali yaris ↑ Sure it is -- but it depends on your tolerance for high revs on the freeway.
And I'm working on a solution for this. If you're pulling all the gears off the output shaft anyway, you might as well replace the 5th gear set with the taller overdrive from the '03-ish Matrix/Vibe/Corolla. That drops your 70 mph revs from about 3600 down to 3200. For reference, the stock trans does about 3500@80 and 3000@70.
You can get an idea of how it would sound by finding a "closed road course" and a "professional driver" to achieve that speed. 😉
Originally Posted by
Bluevitz-rs ↑ The output for the speed sensor is read off of the final drive assembly. But you aren't spinning the FD any faster because your wheels aren't turning any faster at the same speed. It's all the other gear before the FD that change speed. (I hope that makes sense to you all)
I think the newer models use a wheel/axle sensor instead of the internal speedo gear, but the principle is the same. Changing the internal gear ratios only modifies the torque delivered at a given wheel RPM. The trade off is that the transmission input RPMs (engine RPMs) have to change to make the same output speed.
CTScottUSA, CT · Jan 21, 2012#60 Originally Posted by
cali yaris ↑ You don't. As far as I can tell, it didn't change that. Aren't the speed sensors at the wheels?
This is correct for Yaris with ABS. For them the speedometer is fed from the ABS ECU, rather than from the transmission.
thebarberGrand Rapids, MI · Jan 21, 2012#61Where is the ABS Ecu?
Jason@SportsCarDebary, FL · Mar 30, 2012#62Update: we now have a complete trans with the Kaaz gear set from Micro Image, going to be installing it this weekend. 😁
In addition to a little bit of machine work being needed on the 3rd and 4th input gears (which Kaaz will do before shipping the gears out) you will need a new 3rd and 4th synchro, and one new synchro sleeve.
These are OE Toyota parts (I am told Celica parts):
sychro sleeve 33364-20051
3rd 33368-20061
4th 33368-20071
cali yarisThread starterCanoga Park, CA · Mar 31, 2012#63^ NICE. Now go race. 👏
Jason@SportsCarDebary, FL · May 4, 2012#64The close-ratio trans setup works awesome. 👍
Bluevitz-rsOshawa, Ontario, Canada · May 4, 2012#65video? :)
Jason@SportsCarDebary, FL · May 4, 2012#66Bluevitz-rsOshawa, Ontario, Canada · May 4, 2012#67haha, I found it like 10 seconds after posting in the other thread LOL.
GolddeenohColumbia, SC · May 4, 2012#68nice that car is very noisy .. i like it :D
why?harnett county NC · May 4, 2012#69wow, i see you passed at least a mustang, couldn't recognize any of the other cars. Kicking butt and taking names.
CrankyOldManWest Michigan · May 4, 2012#70Yaris! It's a (RACE) car!
ilikericesavannah, ga · May 4, 2012#71impressive..
fnkngrvIn The Hotbox · May 4, 2012#72 Originally Posted by
CrankyOldMan ↑ Yaris! It's a (RACE) car!
Perhaps if the owner of YW actually participated a bit I could have a "like" button to use like so many other modern forums, but alas all I can do is quote and +1.
fnkngrvIn The Hotbox · May 4, 2012#73whatever can get me closer to 175 I am all for it!