so, i lack costs for a custom exhaust to be made, which is what i'd have to do. however, i am taking a look at an eagle talon full exhaust that he had hooked up to a t3/t4 to see if itd fit. he only wants $60. i also put this turbo on craigslist in case i don't find a fitment, and i have a guy with an xb offering to trade me his carbon fiber fender flares that have never been installed. they are the rivet-less ones. what do you guys think?
should i buy this?
107 posts · 17,746 views · page 2 of 3
Replies continued
Only the fronts will fit off the xB, the rears are tapered for doors.
hmm, good thing to consider. thanks
So, I'm trying to get moving on this project again. After some research for a downpipe flange its looking like I may have some sort of garret turbo cause the t22 t25 flanges look like a perfect match. I think I'm gonna order a flange and go by Arkansas performance exhaust to get a quote on a downpipe. Anyone know the specs I would need to tell them for the downpipe? Also, would you suggest 2.5 inch piping? I found a guy selling some turbo parts off his 240 and he offered me his blow off valve with 2.5 inlet for 50 it comes with a boost controller. Good idea? I can try to post a video late tonight. I also found some letters I overlooked on my turbo a while back. It says TBO real big. Then like m3 a8 hope it isn't talking about BMW or Audi. Hah.
Ohh yeah, he had a t3/t4 on his 240, would the bov be compatible? Sorry for noob questions.
Based on pimp my Yaris thread, it seems 2.25" was the way to go. Could I buy his blow off valve that is currently sitting in 2.5 piping, and put it in 2.25 piping? Thanks again.
I really need suggestions for a good bov. I see millions on eBay. someone help please.
if anyone is still subscribed, turns out i can't clock my turbo due to internal wastegate, so im doing research on an external conversion without tapping into manifold.
The BOV is probably going to need a custom mount, but I have no idea without looking at it. Otherwise there's no reason it wouldn't work.
turns out i can't clock my turbo due to internal wastegateSo you have an actuator on the turbo, correct? I don't see why you wouldn't be able to clock it...
check the pics out, if i clock the turbo, that cross beam won't have an attachment site. let me know if you say otherwise.
4 attachments not included in this copy
Yeah you're right - it looks like it can't be clocked very much due to the actuator.
But why do you think you need to clock it? If you use either the Zage manifold or Garm's, the compressor out should be facing up. You're going to need to have the piping custom fabricated anyway.
But why do you think you need to clock it? If you use either the Zage manifold or Garm's, the compressor out should be facing up. You're going to need to have the piping custom fabricated anyway.
i guess when i looked at pimp yaris' thread, when he had it attached to manifold, it looked like they had a good 120+ angle between them. if im wrong, and mine will work as is with a little custome piping, then im happy. bought a blow off valve and boost controller today, will post pics soon. looking at flange sets right now.
hmm...i guess i wasn't even thinking about how the manifold will run down which my angle would then shoot the towards the back of my car as it sits...right? hm. the only thing is that (unless when i add the flange it makes a difference) when i sit the manifold on the turbo, the compresser flange area won't let the mani sit flush.
ordered flange set yesterday. also got a bov and boost controller. knock offs unfortunately...
2 attachments not included in this copy
Tomorrow im going to trade the oversized jdm sport intercooler that came with the kit for the slim but long intercooler that everyone else has on here.
Now i want to get gauges and want one of them to be AFR gauge, any suggestions on a good gauge? i wanted to do the glowshift pillar that comes with 3 gauges for $140, but the AFR gauge they have only works with narrowband, not wide band. any suggestions?
Now i want to get gauges and want one of them to be AFR gauge, any suggestions on a good gauge? i wanted to do the glowshift pillar that comes with 3 gauges for $140, but the AFR gauge they have only works with narrowband, not wide band. any suggestions?
I've used both the AEM UEGO and Autometer's C2 series wideband - both are great.
Glowshift is not a good brand if you want gauges you can count on.
thanks for advice, guys.
so i finally stopped being dumb, and figured out how to clock it. i just need a new bracket. question-in the close up pic of the bolt, it shows that its two pieces, that's normal right? when i undid bolts. cause if it was one piece, it wouldn't come apart...right?
4 attachments not included in this copy
flanges are in. i still need APE to make my custom exhaust, and i still need a new bracket for my turbo actuator
I cant believe I didnt see this thread before. Turbo looks usable, looks like a gt25 knock off. I can tell U one thing for sure. After many months of tunning headaches, there is no way to run a properly tuned car with a mass air flow sensor and a BOV. If U want it to run smooth and never dye out. You need to go stand alone with a manafold pressure sensor or recirculate blow off gases back into the intake. I just installed a hose to recirculate my BOV gases and my car has never run better. I would buy a BOV that you can attach a hose to. Just a sugestion. This project is sure to bring some heavy stress but if you finish it your car will be a lot more fun to drive. Good luck.
Yeah, I've been picking up t25 parts and they seem to work pretty well. So i need to go with a whole different bov to be safe. Then ill be able to keep my maf if I reroute bov gases to intake? Thank you. Any mote suggestions?
You can run a BOV, just run the MAF before the throttle body instead of the turbo inlet tube. It's called a blow through setup. Put BOV anywhere upstream from the sensor (12'' away suggested ). You will get no stalling because the MAF won't know the BOV is open.Originally Posted by pimp my yaris ↑I cant believe I didnt see this thread before. Turbo looks usable, looks like a gt25 knock off. I can tell U one thing for sure. After many months of tunning headaches, there is no way to run a properly tuned car with a mass air flow sensor and a BOV. If U want it to run smooth and never dye out. You need to go stand alone with a manafold pressure sensor or recirculate blow off gases back into the intake. I just installed a hose to recirculate my BOV gases and my car has never run better. I would buy a BOV that you can attach a hose to. Just a sugestion. This project is sure to bring some heavy stress but if you finish it your car will be a lot more fun to drive. Good luck.
This is an example ... one of our kits
Picture not included in this copy
1 attachment not included in this copy
I put my BOV on the intercooler, Grand Am style.
Hmm, pics?
I bought all the stainless pipes, 02 sensor bungs and a stainless flex joint to make a down pipe. Then I mounted the turbo and manafold and drove the car to a couple of exhaust shops. Until I found one that would work with me. Just make sure your oil feed and return are on. The idea of a pressurized mass air does work with a blow off valve. I just dont know how much that effects tuning. I have never seen a pressurized mass air sensor from the factory. One very important thing. Make sure the oil return line enters the top of the oil pan above the oil level. If it is submerged it will be restricted. I learned the hard way.
Got lots of smoke from the exhaust.
Got lots of smoke from the exhaust.
got to do a little fitting today. someone please explain what the opening is on the pic of the close up of a pipe and also where i need to run my pipe to turbo. the AC compressor is in the way.
Fixed it, thanks stove
Fixed it, thanks stove
4 attachments not included in this copy
oh and that intercooler that the guy said would fit, ridicutlous...i need a small one
Unless I'm missing something, the thing in the way is your A/C compressor not your alternator.
You really just need to bring your car to a performance shop. All those pipes are universal bends not cut to length. Intercooler looks like it will fit, it helps though if you dont mount it upside down. Crashbeam has to go.
Oh boy by the time you finish this I bet you could have bought a Zage kit! Good luck man, you need to get this baby to a performance shop like Bown xa said!
Ya that intercooler is way overkill. It will cause to much turbo lag with a small turbo. Mine is only 5.5 inches tall. I bought a universal intercooler and pipe kit off ebay. Still needed to buy a second 2.25" pipe kit to finish.
I'm learning the hard way if you can't tell by the questions I ask and the way I'm doing it all wrong. Yeah, do you remember the vendor you got yours from, pimp. I thought about doing that route. Nobody in town will do this for me. Not even the suggested names on this thread. I figure I wanna learn this anyway, so I just post pics and ask questions, and hope I dont get bashed too badly. Thanks for all advice.
Oh, removed crash beam, didn't know that's what yall had done. Ok, I need another day off.
most people don't , but I did . It is only designed for 5mph hits anyways.Originally Posted by TickleTimeTim ↑Oh, removed crash beam, didn't know that's what yall had done. Ok, I need another day off.
Is it self explanatory to remove? Or should I do a good bit or forum searching.
Don't remove the crash beam, just get a smaller intercooler. That thing is so retardedly large I can't even think of when it would be useful.
Take a look at this. This is the iintercooler and pipe kit I purchased from Ebay. It also came with a BOV that U can recirculate if U want to.
Want to build costom turbo kit. Need advice from boosted guys!
Want to build costom turbo kit. Need advice from boosted guys!
i see your kit, and i want it, but i didn't see the name of it
Aha, found the kit for about 200. How much piping did you end up using from the second kit? Also, i see the bov it comes with, but do you think mine will do fine? How has your bov held up?
what do you guys think of sunpro gauges? just as bad as glowshift?
a cheap gauge is a cheap gauge. It's below my tolerance for quality and reliability. Someone else might like them just fine, though.
I run Faze Gauges. It's an off brand of sunpro. Mechanical water temp and oil, and 5" tach with shift light. Only problem with them is the indiglow backlight is blue and VERY bright at night unless you run resistors on the power supplies. Also one of the power supplies is hit and miss whether the gauge lights up or not.
Edit: forgot to mention they're very accurate too.
Edit: forgot to mention they're very accurate too.
Is the exhaust manifold in the "brand new turbo kit for a Yaris" going to fit your car? You might want to do some measuring and a test fit it to see if you are going to have to buy one of those as well. Since it's obviously not a Yaris kit, just a generic incomplete kit that the seller figured out wouldn't work on a Yaris, you may want to double check. Hate to see you get that far and find out you have one more part to buy.
I am running Auto Meter Phantom gauges. I tried some POS tachometer from EBay for 60$, and it now sits on a shelf. It was unreadable during the day and inaccurate. It also had a stepper motor that was very noisy. Auto meter and good quality and they been around forever in the muscle car crowd. Cost only half as much as Defi guages.
This is the intercooler I am using now. It fits perfect with the crash bar, and is the perfect size for a yaris with 10psi or less. To big a cooler will just add a lot of lag at low psi. I could not find the exact kit I bought with the pipes and BOV. They are all available separately though. U will still need Two 2"-2.25" silicone reducers, and a 2.25" intercooler pipe kit with bov. Make sure the pipe kit has at least 2, 180 degree bends. U will need them at both ends of the intercooler.
http://www.ebay.com/itm/Universal-28...#ht_4355wt_780
http://www.ebay.com/itm/Universal-28...#ht_4355wt_780
there is a guy with 3 autometer gauges and a pillar in texas that wants 100 for it, may consider that.
stove, i didn't even think about that, but that makes a lot of sense. a bit nervous now.
thanks for the intercooler page, and the advice on the 180 bends. i was thinking about sending my piping over the the engine like i had seen someone else do on here, cause i studied your pictures a million times and cant figure out where you sent you piping.
stove, i didn't even think about that, but that makes a lot of sense. a bit nervous now.
thanks for the intercooler page, and the advice on the 180 bends. i was thinking about sending my piping over the the engine like i had seen someone else do on here, cause i studied your pictures a million times and cant figure out where you sent you piping.
I have silicone tubing and reducers in a number of sizes in stock, once you know exactly what you need. I carry Flex Technologies, it's a bulletproof brand a lot of racing teams use.
who will be shooting at me? haha. so should i get an idea with my current tubing and measure a bit, then shoot you a pm?
You should have your piping sized and placed so you know how many joints you have and what angle (0, 45. 90, 180 etc.). Or buy what you know you need and fill in as you go if you don't have clear picture of how all the pieces are going to go yet.