Yarisworld Archive

should i buy this?

107 posts · 17,746 views · page 3 of 3

Replies continued

pimp my yarischicago · Oct 16, 2011#101
If U check my profile, "turbo project pics" there are more pics of some pipe routings.
SchizopreniaSurabaya, Indonesia · Oct 18, 2011#102
Originally Posted by cali yaris ↑
I have silicone tubing and reducers in a number of sizes in stock, once you know exactly what you need. I carry Flex Technologies, it's a bulletproof brand a lot of racing teams use.
wheww.. i just know this Garm, would have asked you for some hoses, a friend of mine's LanEvo III's using cheap hoses that would come off( 😈 really!...) when at full boost condition. all stock...
Blown_xaVirginia · Oct 18, 2011#103
Originally Posted by Bluevitz-rs ↑
I run Faze Gauges. It's an off brand of sunpro. Mechanical water temp and oil, and 5" tach with shift light. Only problem with them is the indiglow backlight is blue and VERY bright at night unless you run resistors on the power supplies. Also one of the power supplies is hit and miss whether the gauge lights up or not.

Edit: forgot to mention they're very accurate too.
mechanical oil pressure gauges scare me. I imagine the line popping off the gauge and having 90psi of hot oil squirt me in the eyeball causing me to wreck and blow the motor at the same instant.
cali yarisCanoga Park, CA · Oct 18, 2011#104
mechanical oil pressure gauges scare me.
+1. fuel pressure too. Fuel and oil are not allowed in my cabin!
TickleTimeTimThread starterArkansas · Oct 19, 2011#105
you guys are fantastic and i have greatly appreciated all advice, but due to my wife getting cut back on hours and a decrease of tips at my job, the turbo kit is going on the back burner. ill mod in other, cheap ways like normal, but i'd rather do something this big when i had money to do it right the first time. at least i'll know what to do different next time, and i've learned a lot. thanks guys.
Bluevitz-rsOshawa, Ontario, Canada · Oct 19, 2011#106
Originally Posted by Blown_xa ↑
mechanical oil pressure gauges scare me. I imagine the line popping off the gauge and having 90psi of hot oil squirt me in the eyeball causing me to wreck and blow the motor at the same instant.
HAHA, well, 6 years and never so much as a drop has leaked. But even that said, I'm going to switch to electronic gauges in the future. My only issue with the mechanical ones is that I can't take them out if I need to because they're connected to the engine. LOL
cali yarisCanoga Park, CA · Oct 20, 2011#107
^ hadn't thought of that. Yet another good reason. 🙂