Yarisworld Archive

Micro Image Short Shift Kit- prototype review

125 posts · 57,866 views · page 1 of 3

mazillaOriginal postSan Jacinto California · May 20, 2011#1
Originally Posted by cali yaris ↑
I am producing our own Micro Image SSK, which will include the extra bracket just like the new TRD one does.

Pricing will be VERY good, awaiting a prototype to test and production is a GO.

Thanks
With Garms blessing, I'm sharing the good news...



It's official, the prototype has been installed. 🤘

I installed the new Micro Image SSK on my 07 liftback last night!! With the addition of the bracket the entire short shift system really feels complete. The immediate difference is the smoothness while shifting between gears. This appears to be due to the shifter cables now being free from the tension normally on them when you install the short shifter adapter alone(due to the angle change). I had the NST engine bay SSK, and I noticed during install I had to force the shift cable bushings down onto the adapter stud. With this new bracket there was no resistance, everything set in place like it was made to go together...I wish they were all this easy. Also, for those concerned with weight savings, there seems to be about a 1lb difference between the factory bracket and the lighter MI bracket.
I pulled the battery for this one, it made it easy to install and give the area a little cleaning. I also removed and painted the battery tray as it was getting rusty. Removing the battery keeps you from having to lift the car at all...something to consider if you don't like spending time under a ton of metal laying on your back.



If you're considering a SSK, do it. Even my wife loves the SSK, You should have seen how excited she was when she got home after taking the Yaris to work. "I can shift so fast!" is the first thing she said when she stepped out of the car. I was like 😲


*sorry for the dirty engine, but this car does have 450K+ miles on it. Only 275K(ish) on this engine however...so I guess I'm slacking. I've got a few things going on at the moment, if I forgot something please let me know.

Thanks for looking, and remember to get at Garm for your goodies.

THE GOODS
Picture not included in this copy
TOP SHOT OF THE ENGINE BAY
Picture not included in this copy
OLD BRACKET VS. NEW BRACKET
Picture not included in this copy
OLD BRACKET REMOVED
Picture not included in this copy
NEW BRACKET IN (TOP VIEW)
Picture not included in this copy
NEW BRACKET IN (FRONT VIEW)
Picture not included in this copy
NEW BRACKET + ADAPTER **UPON COMPLETION DON'T FORGET THE ORIGINAL WASHERS GO ON TOP OF THE BUSHINGS, I LEFT THEM OFF FOR THE PICTURE ONLY.
Picture not included in this copy

Replies 124

marcustoronto, canada · May 20, 2011#2
Really another shifter mod... I'm happy with my ssk but if it gets smoother I'm in .. Subscribed!!!!!!
BEEFnorth carolina · May 20, 2011#3
I would have loved to see the two brackets on top of one another to see how much of a difference there really is between the two openings. I figure that is where the smoothness comes from. the old bracket is made for the original spacing where the new one (I assume) has the openings slightly closer so that it lines up better with the new positioning.

I definitely want one of these so bad. my throw is so long right now.
Black_griffin6Atlanta Georgia · May 21, 2011#4
Do want.
I would really like to get an SSK like the TRD one but the TRD one is so bloody expensive.
BEEFnorth carolina · May 21, 2011#5
I've heard this one is going to be much cheaper. I can't wait for it myself.
rningonfumesSoCal · May 21, 2011#6
mmmm...Goodness.
toastNappanee, IN · May 22, 2011#7
Any chance of that bracket being available separate for those of us with who already have another brand engine bay ssk like piggies etc?
JTDBT903NE. OHIO · May 22, 2011#8
Originally Posted by toast ↑
Any chance of that bracket being available separate for those of us with who already have another brand engine bay ssk like piggies etc?
+1
blacksandiegovitzJust chillin' out brah ! · May 22, 2011#9
Originally Posted by JTDBT903 ↑
+1
+2
why?harnett county NC · May 22, 2011#10
So this is an in engine bay mod, would the other in cabin mod work with this?

Also, does this make the physical position of the shifter different, or just the throws shorter.

I might just get it because it weighs a pound less, and because MI made it.
ilikericesavannah, ga · May 23, 2011#11
i have the In-cabin SSK. i was also waiting for the engine bay kit from NST but never came.. the cabin is basicly a ball you place over the exsisting shifter under the cage. (if you know what i mean.) its a very easy and simple mod. i honestly dont know how this works, only that its making the cables not move as far from shifting.. but i did tighten up my shifter noticable. i will also be getting this engine bay kit as well in the near future.
marcustoronto, canada · May 23, 2011#12
just by looking at it i think it suppose to change the angle of the cables it seems like this will keep it straight rather than angled due to the ssk mod...
aucoriumSouth Africa · May 23, 2011#13
nice !!!!
TooyutaNJ · May 26, 2011#14
👍 Group buy? 😆
cali yarisCanoga Park, CA · May 26, 2011#15
sorry guys, been offline.

1. I will be able to sell the bracket separately, but I haven't tested that combination (new bracket with old SSK) so I can't comment on it.

2. The price will make you smile.
Mister ZRancho Cucamonga, CA · May 27, 2011#16
how soon will this be available? and will this fit the 09+ yaris without modification? I know the NST ssk needs to be slightly modified to fit an 09+ yaris.
RedRideMiddletown, NY · May 27, 2011#17
2. The price will make you smile.
That got my attention and made me smile already. 🙂
BEEFnorth carolina · May 27, 2011#18
just waiting right now. I put the extender on and my throw is about 8" so I need to do something. the extender does put the shifter almost exactly where I want it. just need to change the throw.

c-mon, sell it to us...you know you wanna.
RedRideMiddletown, NY · May 27, 2011#19
Originally Posted by Mister Z ↑
how soon will this be available? and will this fit the 09+ yaris without modification? I know the NST ssk needs to be slightly modified to fit an 09+ yaris.
Actually, this is not entirely true.
The probelm is, starting in '09 Toyota used two different vendors for the linkage that the SS mounts on.
Depending on which vendor they used, you might have to use a file or dremel to make it fit as the two linkages are slightly different from each other.
This is due to the hole for the cotter pin is not always %100 clear and able to accept the pin easily because the SS sits a hair higher on the stock linkage pin. Even then, the hole is still always visible.
On some with the linkage in question, all it takes is to gently tap the pin in once started in the hole.

In any event, it ony takes a minuite or two with a file to rectify this and it's no big deal.

IMO a newly designed/marketed SS should have been be machined to fit all '09 + linkages as the differnce between the two is extremely slight. Perhaps even a very thin shim could be supplied for use with older/other particular Yaris that need it although a shim would probably not even be nessary.
BEEFnorth carolina · May 27, 2011#20
garm told me that the new one would work for both vendors though that was back when it was still in the prototype process. I asked him about the old one before he took it off his web site and that is when I found out he was working on this one.

my assumption is that this new one will not have this issue though many have said that it wasn't much of an issue (as stated by RedRide).

I just want one and with the addition of the plate, this one seens right up my alley.
RedRideMiddletown, NY · May 27, 2011#21
^

That's great! 🙂
OTA'sTOYHilo, Hawaii · May 27, 2011#22
how much! how much!
NZ-FE ViosGeorgia · May 28, 2011#23
Haven't followed any previous threads about this but am interested once available
BEEFnorth carolina · May 28, 2011#24
yea the waiting game is really sucking on my end too. I talked to garm about a month (maybe month and a half) ago about this.

he gave me a price range but I dare not say as I know that cost can go up once you find out how much it will actually cost to produce. I honestly don't care how much it is, I just want it. obviously there is a limit to that "don't care" mentality but if it is reasonable, I will make an order as soon as he says I can.
cali yarisCanoga Park, CA · May 29, 2011#25
In production, will try to get an ETA this week for delivery of the shipment.

This IS a group buy guys -- without the group. 😆
Mister ZRancho Cucamonga, CA · May 29, 2011#26
Can't Wait!!!
BEEFnorth carolina · May 29, 2011#27
garm,

you might be suprised by how many people are going to order this almost immediately, and that number is going to be even higher if you sell just the bracket separately. I have seen quite a bit of interest in it just from my searching around.

you definitely hit the market at the right time with this one(many of us would have loved it earlier)

***edit***

any idea about price? final price? just curious
why?harnett county NC · May 29, 2011#28
Originally Posted by cali yaris ↑
... a group buy guys -- without the group. 😆
That should so be MI's motto.
NZ-FE ViosGeorgia · Jun 29, 2011#29
Any word?
BEEFnorth carolina · Jun 29, 2011#30
the last I heard, they were going to be available around july 1st. hopefully that still holds true. I have been chomping at the bit for this one.
cali yarisCanoga Park, CA · Jun 30, 2011#31
They are on the boat and on the way. Because of the weight of the shipment, we opted for slower ocean freight shipping. I don't have an ETA, but I will get an arrival notice when the ship is close to the Port of Los Angeles.
BEEFnorth carolina · Jun 30, 2011#32
how many are going to be on this first shipment?

also, anything on pricing?
RedRideMiddletown, NY · Jun 30, 2011#33
Originally Posted by cali yaris ↑
They are on the boat and on the way. Because of the weight of the shipment, we opted for slower ocean freight shipping. I don't have an ETA, but I will get an arrival notice when the ship is close to the Port of Los Angeles.
I promise I will not make any jokes about slow boats friom China. 😁
cali yarisCanoga Park, CA · Jun 30, 2011#34
how many are going to be on this first shipment?
you don't want to know. 🙁

also, anything on pricing?
Right now it's looking like $89 shipped for the full kit, and TBA pricing for just the bracket.
BEEFnorth carolina · Jun 30, 2011#35
I honestly don't care how many it is just as long as I get one. and as for the $89, I can handle that (along with the cable bushing kit)

just let me know when. I assume since it is coming by boat, it will be a bit farther out than July 1st?
derickveliz2Central, MA · Jun 30, 2011#36
Another good mod that transforms in a must have!

D.
Mister ZRancho Cucamonga, CA · Jul 1, 2011#37
Originally Posted by cali yaris ↑
you don't want to know. 🙁



Right now it's looking like $89 shipped for the full kit, and TBA pricing for just the bracket.
If we pay now can we reserve our kit?
cali yarisCanoga Park, CA · Jul 1, 2011#38
Don't worry there will be plenty. My supplier says the shipment is due to arrive (plus customs, then trucking) on about July 18. 🙂
boooggyBucharest · Jul 1, 2011#39
garm
it will work also for 1.33 liter engine?
cali yarisCanoga Park, CA · Jul 1, 2011#40
^ sorry don't know what the linkage and bracket look like on that one. Post up some pics?
malibuguyWestminster, MD · Jul 1, 2011#41
I may have to pick one up too...but i really dont hate the stock stuff
NZ-FE ViosGeorgia · Jul 6, 2011#42
I don't dislike the stock either. I think everything on the car is quite well done as I would expect from a Toyota. However I think that making this car quicker has less to do with increasing HP and more to do with proper application of what car has originally.

Have you done any exhaust work for your Yaris Greg?
cali yarisCanoga Park, CA · Jul 6, 2011#43
I think everything on the car is quite well done as I would expect from a Toyota.
There is always room from improvement on a $12,000 car.

I think that making this car quicker has less to do with increasing HP and more to do with proper application of what car has originally.
I'll take my 400 hp and playfully disagree. 😆
NZ-FE ViosGeorgia · Jul 6, 2011#44
Haha. I said quick not fast. I think that double the HP would be fast, which is much less than 4x stock HP. 400 would be quite a screamer.

Edit. My bad didn't realize I was responding to one of the nastiest cars on the board
cali yarisCanoga Park, CA · Jul 6, 2011#45
heh, no worries!
mazillaThread starterSan Jacinto California · Jul 7, 2011#46
Just an update...


I'M LOVING THIS SHORT SHIFT KIT!!

I have yet to find a problem with it, and I have yet to find a person who is not blown away by the difference it makes...including myself every time I drive the car.
BEEFnorth carolina · Jul 7, 2011#47
Originally Posted by mazilla ↑
Just an update...


I'M LOVING THIS SHORT SHIFT KIT!!

I have yet to find a problem with it, and I have yet to find a person who is not blown away by the difference it makes...including myself every time I drive the car.
see, this is like torture. I soooo want this kit. I guess I'll just have to wait until the 18th like everyone else.

glad to know that there are no hidden negative affects so far. been waiting for this ever since I extended my shifter.
SchizopreniaSurabaya, Indonesia · Jul 11, 2011#48
Originally Posted by cali yaris ↑
you don't want to know. 🙁



Right now it's looking like $89 shipped for the full kit, and TBA pricing for just the bracket.
Hahaha, Garm told me how many, then i 😳 🙇 hehe..

Garm, email me the price for the bracket alone and another complete set. I hope it could ship together with the backordered red crank pulley. :)
marcustoronto, canada · Jul 13, 2011#49
do we do the group buy now....

1. marcus
SAV912Savannah, GA · Jul 13, 2011#50
Yes please. Put me down for one as well!

1. marcus
2. SAV912