Replies continued
ezhacker1San Francisco · Aug 7, 2011#101just installed today..2 hours of frustration.
I love the new feeling, even shorter shifts than before (full NST ssk kit).
Pics show the difference in height the cables sit.
Without the bracket, there was damage to the engine bay short shifter. The bearing bit into the side.
3 attachments not included in this copy
KSIbuckyFond du Lac, WI · Aug 8, 2011#102^now we have your finger prints. I'm going to rob some banks.
p.s. finally go the bracket installed
jpmck03USA · Aug 19, 2011#103 Originally Posted by
mazilla ↑ It's official, the prototype has been installed. 🤘
I installed the new Micro Image SSK on my 07 liftback last night!!
...
NEW BRACKET IN (FRONT VIEW)
Picture not included in this copy
NEW BRACKET + ADAPTER **UPON COMPLETION DON'T FORGET THE ORIGINAL WASHERS GO ON TOP OF THE BUSHINGS, I LEFT THEM OFF FOR THE PICTURE ONLY.
Picture not included in this copy
I noticed that you don't have the wiring harness bracket attached. On mine, there is one (labeled in blue):
Picture not included in this copy Shouldn't there be one on your new MI bracket? I drew one in where it ought to be (in blue above the cable clips)...
Picture not included in this copy I notice that you have an '07. Did they not have the bracket for that model year? Or did you skip putting it back in? 🤷 🤷
goliath1812Ocala Florida · Aug 20, 2011#104Must have just not put it back on. The SSK bracket doesn't come with a new wiring bracket, but it does have a place to screw the old wiring bracket back on.
mazillaThread starterSan Jacinto California · Aug 20, 2011#105 Originally Posted by
jpmck03 ↑
I notice that you have an '07. Did they not have the bracket for that model year? Or did you skip putting it back in? 🤷 🤷
I just skipped putting it back...didn't even realize it. I'll take a look and see if it's necessary.
👍
1NZYaris1New Zealand · Aug 21, 2011#106Finally Got mine Yesterday
thank You Garm 🙇🙇🙇
1 attachment not included in this copy
SpidermandudJohnson City, Tennessee · Aug 21, 2011#107Coooooooooooooooooooooooooool.
jpmck03USA · Aug 21, 2011#108 Originally Posted by
1NZYaris1 ↑ Finally Got mine Yesterday
thank You Garm 🙇🙇🙇
Crap, that's where the Micro Image decal goes!? Why didn't Garm tell me? Now I have to pull everything back out to put the decal on... 😛
🤣 🤣
toastNappanee, IN · Aug 26, 2011#109Garm, I got my bracket today, installed it and I like it! I followed the pdf that was posted and had no problems with the removal or new install. Total time was right at an hour and I'm an old slow guy. The only hard part is the silver wire harness holder is annoying and the 14mm bolts needed convincing with the 18" breaker bar and all was golden.
I've only driven it around the block to test so far and the difference between with and without the bracket is subtle but noticeable with my old piggies ssk. It's smoother, feels more solid between shifts and takes less wrist effort. Thanks
cali yarisCanoga Park, CA · Aug 26, 2011#110Excellent, nice to hear of a relatively problem-free install!
KevDWinnipeg, Canada (eh!) · Aug 26, 2011#111Got my kit yesterday! Thanks again for the quick/great service! Oh and also for this kit! Looks great! I won't get a chance to install it just yet, but I will let you know when i do.
1NZYaris1New Zealand · Aug 27, 2011#112Just got mine Instaled 🙇🙇🙇 Garm 🙇🙇🙇
Thank you so much
Man this thing is awesome , and the shift is real smooth, to boot
which is surprising since i have The NST in-Cabin short sifter as well 😲
4 attachments not included in this copy
Black_griffin6Atlanta Georgia · Aug 28, 2011#113@ 1NZYaris1: is that green stuff around the SSK and other shifter linkage a lubricant? I've been debating on putting a lubricant on the same place.
1NZYaris1New Zealand · Aug 31, 2011#114 Originally Posted by
Black_griffin6 ↑ @ 1NZYaris1: is that green stuff around the SSK and other shifter linkage a lubricant? I've been debating on putting a lubricant on the same place.
yes it is a teflon lube 👍
Black_griffin6Atlanta Georgia · Aug 31, 2011#115 Originally Posted by
1NZYaris1 ↑ yes it is a teflon lube 👍
Do you think it really needs it? I recently put some lube on mine and I haven't noticed a big difference yet. But then again, I didn't take it apart and put it right on the SSK.
lammy29Nottingham, UK · Sep 8, 2011#116i think i might have to try the bracket on mine as no one else has confirmed if it fits or not
2mtechNorth Carolina · Sep 17, 2011#117I put the engine bay short shifter in today, and realized I'd made a mistake not ordering the bracket with it. I noticed the cable angle change before roadtesting the car, and it definitely made shifting a bit too notchy for me, especially going into 1st. I put it back to stock, but I can tell I'm going to like the mod so I'm ordering the bracket right now. Thanks for all the reviews and tips, guys! 🎉
w7istrenton, wa · Sep 21, 2011#118Just ordered mine. Can't wait.
2mtechNorth Carolina · Sep 24, 2011#119Got mine reinstalled today, with the bracket. It's WAAAAAYYYY better than stock, and definitely considerably better than with the short shifter only IMO. Way to go, Garm...quality product! 👏
AltitudeColorado · Sep 24, 2011#120After having driven with it for a while now, I just wanted to say that while it isn't a must have mod like the rear sway bar, it's way better than stock and I wouldn't go back. I highly recommend it to everyone.
Thanks Garm, for bringing this awesome mod to the masses.
cali yarisCanoga Park, CA · Sep 24, 2011#121Thanks guys, happy to make it happen.
w7istrenton, wa · Sep 24, 2011#122Got mine super fast! Great job Garm! I have only installed the linkage and not the bracket because I was having a real hard time getting the cable clips off, but so far, the difference is great! Along with the tein coilovers I got from garm, this car is beginning to feel surprisingly sporty!
2mtechNorth Carolina · Sep 26, 2011#123 Originally Posted by
w7ist ↑ Got mine super fast! Great job Garm! I have only installed the linkage and not the bracket because I was having a real hard time getting the cable clips off, but so far, the difference is great! Along with the tein coilovers I got from garm, this car is beginning to feel surprisingly sporty!
jpmck03's trick of clamping a large pair of Vise-Grips to the 90° lip at the top of the clip and working it back and forth while pulling up worked great for me.
w7istrenton, wa · Sep 26, 2011#124I actually just finished the rest of the kit. I had to dig up a screw driver with a head big enough and they came out like a breeze.
Fully installed now and it feels awesome. Thanks for a great product, Garm.
cali yarisCanoga Park, CA · Sep 26, 2011#125👍