Hey Scott. Have anymore cruise control stalks I can come pick up?
FS: OEM Cruise Control Stalk with Wire and Screws
175 posts · 170,478 views · page 3 of 4
Replies continued
I do. I always have some on hand.Originally Posted by henrylee ↑Hey Scott. Have anymore cruise control stalks I can come pick up?
I just took mine to be installed today and the installer took one look and said its a cheap Chinese knockoff. Any ideas?
Did he install it?Originally Posted by jayeh ↑I just took mine to be installed today and the installer took one look and said its a cheap Chinese knockoff. Any ideas?
Yes.Originally Posted by ToyotaBuzz ↑Did he install it?
I have no idea why he would say that, as it is genuine OEM stalk. The only thing that might have made him question it is the horn wire, which I add, to save people the hassle of breaking the pin to pull their's out of the original connector.Originally Posted by jayeh ↑I just took mine to be installed today and the installer took one look and said its a cheap Chinese knockoff. Any ideas?
I will have to do some research for you when I return. I am currently in Northern Europe on holiday.Originally Posted by isidoro ↑Hello CTScott
I write from another part of the world “italy”
I are desperate😢
I know that we are talking only of yaris
but you are the experts on Cruise Control that I found
I own a hybrid Auris HSD 1,8L
I put all the parts needed as the model with the standard Cruise Control
when I press the button on/off, the lights Cruise Control lights up green
but just release the brake I get a yellow triangle and the following “check Cruise Control “
do you have any advice for me??? 🙇
thanks so much in advance
foto http://tinyurl.com/nfsms5n
do u have anymore?
I am a bit more North: England, Denmark, Sweden, Estonia and Russia.Originally Posted by isidoro ↑while visiting europe
if you go to Northern Italy
I'll pick you??
I am close to Bergamo, which has the largest airport
where land all European flights
Bye-Bye!
YesOriginally Posted by rapev-8 ↑do u have anymore?
Do you have more? :)
YesOriginally Posted by Jadijkstra2000 ↑Do you have more? :)
Will it work on european Yaris 2010?
Was reading thru a few treads, seems your saying that all yaris have the hard wiring from the factory, correct? I have a 07 hatchback auto trans. If all i need is this kit your selling i'd like to purchase one, if you still have some available. Pay pal ok? Thanks Bruce
I'm interested in one as well if still available. Will be for an 08 liftback 5spd
My understanding is no, but a person from Germany recently ordered one from me, as he was told that it would work. I will let you know when I hear back from him.Originally Posted by Jadijkstra2000 ↑Will it work on european Yaris 2010?
Number of the ECU is : 89661-0dd90
Hope it can work :) Would be nice
Hope it can work :) Would be nice
It looks like the car already has the clutch switch installed, i cannot have it started when the clutch is not pressed... So i guess that one is installed...
The cruise control clutch switch is different. The starting one requires the clutch to be pressed completely to trigger, where the cruise control one triggers as soon as the clutch switch is touched.Originally Posted by Jadijkstra2000 ↑It looks like the car already has the clutch switch installed, i cannot have it started when the clutch is not pressed... So i guess that one is installed...
ah alright, didn't know that, thanks :) are there ways to check if the car is prepared for cruise?
The best test is to check the voltage on pin 40 of the A21 ECM connector (see my DIY below for that location). If there is 12 V on that pin with the ignition on, then cruise is present.Originally Posted by Jadijkstra2000 ↑ah alright, didn't know that, thanks :) are there ways to check if the car is prepared for cruise?
DIY: 2006-2011 Yaris OEM Cruise Control Complete Installation
Do I need to remove the A21 connector to do the test or leave it in place for testing?Originally Posted by CTScott ↑The best test is to check the voltage on pin 40 of the A21 ECM connector (see my DIY below for that location). If there is 12 V on that pin with the ignition on, then cruise is present.
DIY: 2006-2011 Yaris OEM Cruise Control Complete Installation
Leave it in place. You will need to pull the rubber plug if there is not a wire present, so you can stick a piece of wire in to take the measurement.Originally Posted by Jadijkstra2000 ↑Do I need to remove the A21 connector to do the test or leave it in place for testing?
Just wondering if you have any of these left and if you do how much? If you do would you please comtact me though my email @ cgoretx@gmail.com
email sent.Originally Posted by Mommas Yaris ↑Just wondering if you have any of these left and if you do how much? If you do would you please comtact me though my email @ cgoretx@gmail.com
Same question as above, including the OEM Stalk CC Pin Kit, and Cruise Control Indicator Module. Please send PM. ThanksOriginally Posted by Mommas Yaris ↑Just wondering if you have any of these left and if you do how much? If you do would you please comtact me though my email @ cgoretx@gmail.com
PM sentOriginally Posted by xboxer ↑Same question as above, including the OEM Stalk CC Pin Kit, and Cruise Control Indicator Module. Please send PM. Thanks
Do you still have any these?
07 sedan m/t. Cost as well. Thanks
07 sedan m/t. Cost as well. Thanks
Yes. PM sent.Originally Posted by Tylard ↑Do you still have any these?
07 sedan m/t. Cost as well. Thanks
Please send me the pricing & payment info also.
I have a 2007 hatch. Does your kit include everything necessary?
Thanks
Nortonfb
68 Norton fastback👍
(Steve)
I have a 2007 hatch. Does your kit include everything necessary?
Thanks
Nortonfb
68 Norton fastback👍
(Steve)
PM Sent. The kit includes everything necessary, other than the tools to do the install.Originally Posted by nortonfb ↑Please send me the pricing & payment info also.
I have a 2007 hatch. Does your kit include everything necessary?
Thanks
Nortonfb
68 Norton fastback👍
(Steve)
ive got a 2007 sedan, can you pm me with the price and what i would have to do to install? thanks
PM sentOriginally Posted by z0mb13k1ll ↑ive got a 2007 sedan, can you pm me with the price and what i would have to do to install? thanks
Super fast shipping, install not too bad, fishing the wires was def the hardest part. But I cant seem to get it to function on my 07 m/t sedan. I have tried rechecking all the connections and triple check the clutch switch to ensure it is fully pressed in when the my foot is off the clutch pedal.
Any suggestions of what to check?
My wire coming out of pin 40 on the ECM is hooked up and ran through the firewall. I connected this directly to the wire coming out of the slot 1 of the D3 connector. Is this ok or do I need a different wire? If so what is it where do I get it
Any suggestions of what to check?
My wire coming out of pin 40 on the ECM is hooked up and ran through the firewall. I connected this directly to the wire coming out of the slot 1 of the D3 connector. Is this ok or do I need a different wire? If so what is it where do I get it
Double check your pin 1 and pin 2 locations per my DIY (DIY: 2006-2011 Yaris OEM Cruise Control Complete Installation)Originally Posted by Tylard ↑Super fast shipping, install not too bad, fishing the wires was def the hardest part. But I cant seem to get it to function on my 07 m/t sedan. I have tried rechecking all the connections and triple check the clutch switch to ensure it is fully pressed in when the my foot is off the clutch pedal.
Any suggestions of what to check?
My wire coming out of pin 40 on the ECM is hooked up and ran through the firewall. I connected this directly to the wire coming out of the slot 1 of the D3 connector. Is this ok or do I need a different wire? If so what is it where do I get it
Also, with the ignition switch in the ON position, you can measure the voltage on the pin1 wire and will see 12V if it is connected properly. (Pin 1 is the one that goes to pin 40 on the ECM connector).
Also, double check your pin 40 to make sure you didn't install it on the opposite side of where it belongs.
Checked pin 1 and 2 and Im happy with them. Rechecked pin 40 also happy with that.
Checked the voltage. I put my red lead on the connection between the pin 1 wire and the pin 40 ecm wire. Then I put my black lead on the bolt where pin 2 from the d3 connection is mounted. I get 12 v with the ignition turned on. Holding and toggling the cruise on/off switch does NOT make change and still reads 12 volts.
Where the pin 2 wire is mounted there is a black lead already connected to that, I just added on the pin 2 wire and put the bolt back on.
Checked the voltage. I put my red lead on the connection between the pin 1 wire and the pin 40 ecm wire. Then I put my black lead on the bolt where pin 2 from the d3 connection is mounted. I get 12 v with the ignition turned on. Holding and toggling the cruise on/off switch does NOT make change and still reads 12 volts.
Where the pin 2 wire is mounted there is a black lead already connected to that, I just added on the pin 2 wire and put the bolt back on.
Ah, the pin 2 wire is the "other side". It is the ground for the system.Originally Posted by Tylard ↑Checked pin 1 and 2 and Im happy with them. Rechecked pin 40 also happy with that.
Checked the voltage. I put my red lead on the connection between the pin 1 wire and the pin 40 ecm wire. Then I put my black lead on the bolt where pin 2 from the d3 connection is mounted. I get 12 v with the ignition turned on. Holding and toggling the cruise on/off switch does NOT make change and still reads 12 volts.
Where the pin 2 wire is mounted there is a black lead already connected to that, I just added on the pin 2 wire and put the bolt back on.
The black wire is not pin two. It is in the opposite row from pin 2. In this picture you can see the blue wire in pin 1 and the brown in pin 2:
Picture not included in this copy
1 attachment not included in this copy
My D3 connector looks just like the one pictured. The wires sent are different colors but going off the colors shown in the picture. The blue one connects directly to the A21 pin 40 wire. The brown one goes to a bolt (for grounding).
"4.8. Splice the ECM pin wire to the piece of 18-22 AWG wire using a butt splice or
solder and heat shrink tubing."
Do I really need to do that because the wire you sent me is long enough to reach the D3 connector.
solder and heat shrink tubing."
Do I really need to do that because the wire you sent me is long enough to reach the D3 connector.
No. They are long enough to reach with how I ship them now.Originally Posted by Tylard ↑"4.8. Splice the ECM pin wire to the piece of 18-22 AWG wire using a butt splice or
solder and heat shrink tubing."
Do I really need to do that because the wire you sent me is long enough to reach the D3 connector.
Got the issue resolved, I now HAVE CRUISE!! Pretty sure this just doubled the value of my car. So happy about this.
And buy your stuff from CTScott. He does all the BS work so you don't have to and everything comes ready to hook up. Fast shipping, good customer service, and it was pretty fricken cheap too. Scotts the man.
I ran across this forum while searching for a solution for a Yaris without cruise.
I'm needing to make twice weekly 250 mile trips and unfortunately am finding it
difficult keeping a constant speed with old worn out feet and legs.
I have an 2008 Yaris hatchback (base) with a manual transmission.
Are the cruise control kits still available?
Thanks
I'm needing to make twice weekly 250 mile trips and unfortunately am finding it
difficult keeping a constant speed with old worn out feet and legs.
I have an 2008 Yaris hatchback (base) with a manual transmission.
Are the cruise control kits still available?
Thanks
CT Scott has them. Drop him a PM.
Steve
Steve
Thanks
OK scott ..... might tackle this in the next month....
message me info on buying the kit for a 2007 (power package?) AT Liftback
Thanks!
message me info on buying the kit for a 2007 (power package?) AT Liftback
Thanks!
Hi Scott - previous customer here, now with an automatic 2014 2DR. Would the kit you sell work on my 2014 as well? Would love to get CC installed on it. You mentioned in the other thread that the 2015 doesn't require additional wiring, is that true for 2014 too? And by that, do you mean I just plug in the OEM stalk and the rest of the wiring to the car's computer is already there? If so, that's very nice!
Let me know where to Paypal!
Let me know where to Paypal!
I bought this parts numbers to use on my 2015 yaris
Screw w/washer 90080-15079
Switch assy clutch 88280-14030
Wire Cruise sw 84633-02020
Speed control 84632-0821
I was installed in 2 hours, And works, inmediatelly
Screw w/washer 90080-15079
Switch assy clutch 88280-14030
Wire Cruise sw 84633-02020
Speed control 84632-0821
I was installed in 2 hours, And works, inmediatelly
Yes. Same parts and simply install the stalk for your AT Yaris. And I even carry the steering wheel side trim pieces for the 2012-2015.Originally Posted by hayden ↑Hi Scott - previous customer here, now with an automatic 2014 2DR. Would the kit you sell work on my 2014 as well? Would love to get CC installed on it. You mentioned in the other thread that the 2015 doesn't require additional wiring, is that true for 2014 too? And by that, do you mean I just plug in the OEM stalk and the rest of the wiring to the car's computer is already there? If so, that's very nice!
Let me know where to Paypal!
Got my stalk yesterday and installed today in less than 5 minutes. Amazing how much easier it is now!Originally Posted by CTScott ↑Yes. Same parts and simply install the stalk for your AT Yaris. And I even carry the steering wheel side trim pieces for the 2012-2015.
Thanks again Scott for all your documentation and service! And fast shipping!