Yarisworld Archive

FS: OEM Cruise Control Stalk with Wire and Screws

175 posts · 170,478 views · page 2 of 4

Replies continued

SimTronikSts-Anges, Quebec, canada · Dec 2, 2011#51
Perfect thanks! Any tips what to avoid with the airbag?
CTScottThread starterUSA, CT · Dec 2, 2011#52
Originally Posted by SimTronik ↑
Perfect thanks! Any tips what to avoid with the airbag?
Just make sure that you disconnect the negative battery terminal and wait a couple of minutes before disconnecting the airbag, and when you remove it, set it down on its frame, rather than on the Toyota logo.
SimTronikSts-Anges, Quebec, canada · Dec 3, 2011#53
Everything is plugged in and back on its place but i cant remove the steering colum cover. i think its because the wheel is in place? So i cant check for the d3 pins. Can i just road test it lol? or it is risky?
CTScottThread starterUSA, CT · Dec 3, 2011#54
You can just road test it, or better yet, turn the ignition to ON, press the on/off on the stalk, and see if the indicator comes on.
SimTronikSts-Anges, Quebec, canada · Dec 3, 2011#55
It works! Can beleive i have a cruise control for 40 bucks :) Thanks sir.
33OHDover, Ohio · Dec 9, 2011#56
Scott, can you PM me what all I'd need to run this on my 2008 Yaris LB 5 speed? Interested but not sure if the wiring would be over my head.
CTScottThread starterUSA, CT · Dec 9, 2011#57
Originally Posted by 33OH ↑
Scott, can you PM me what all I'd need to run this on my 2008 Yaris LB 5 speed? Interested but not sure if the wiring would be over my head.
You can definitely handle it. With my DIY many who have never touched any wires in a car have self installed it.

DIY: 2006-2011 Yaris OEM Cruise Control Complete Installation
A-Dingo-Ate-My-Babyearth · Dec 9, 2011#58
protip

for the two screws, you can use 2 standard server rack mount screws
found in most computer rooms or racks....
they are typically the same size and thread pitch, and short enough as well

that is what I used on my cruise control after digging through my junk drawer
deathwisherBC · Dec 9, 2011#59
Originally Posted by A-Dingo-Ate-My-Baby ↑
protip

for the two screws, you can use 2 standard server rack mount screws
found in most computer rooms or racks....
they are typically the same size and thread pitch, and short enough as well

that is what I used on my cruise control after digging through my junk drawer
That depends on if you are in Canada or US... >.> Canada's server rack uses #10-32 screws. I can't remember which one the US ones used...
GAAzureMach1Greenville, GA · Dec 14, 2011#60
Hey Scott, I have a 2010 HB 3dr L Automatic with the convenience package. Can you pm me with cost and payment info?

Thanks, Todd
YAR1SRaleigh, NC · Dec 15, 2011#61
soooo are these plug and play for 2007 liftback? *crosses fingers*
CTScottThread starterUSA, CT · Dec 15, 2011#62
Originally Posted by YAR1S ↑
soooo are these plug and play for 2007 liftback? *crosses fingers*
Yes. There is a little bit of wiring that needs to be added for 06-08 Yaris, but it is just a matter of adding a couple of pins to two connectors and running the wire from the ECM to the steering column. Take a look at my DIY to see exactly what's involved:

DIY: 2006-2011 Yaris OEM Cruise Control Complete Installation
thestrangerColorado Springs, CO · Dec 25, 2011#63
hey Scott, I know I'm like a year late... got an '09 lb/mt. any more stalks for sale? :)
CTScottThread starterUSA, CT · Dec 25, 2011#64
Originally Posted by thestranger ↑
hey Scott, I know I'm like a year late... got an '09 lb/mt. any more stalks for sale? :)
Yes. I still have plenty.
GAAzureMach1Greenville, GA · Dec 31, 2011#65
money sent.
GAAzureMach1Greenville, GA · Jan 6, 2012#66
Scott I got it in the mail today. Took me 20 mins for the whole install. Easiest mod I have ever done. Thanks a bunch!

🎉
ttr125fan09corpus christi, texas · Jan 22, 2012#67
if you have any left for sale, i would be interested
CTScottThread starterUSA, CT · Jan 22, 2012#68
Originally Posted by ttr125fan09 ↑
if you have any left for sale, i would be interested
I do still have some.
HerderBay City, MI · Oct 25, 2012#69
CTScott, you still have any stalks? I have a 10' LB Auto no power package
CTScottThread starterUSA, CT · Oct 25, 2012#70
Originally Posted by Herder ↑
CTScott, you still have any stalks? I have a 10' LB Auto no power package
I do indeed. I replied to your PM.
MachinistGurnee, Il. · Nov 18, 2012#71
CTScott, you still have any stalks? I have a 2011 3dr. power doors, locks, etc. Manual trans.
CTScottThread starterUSA, CT · Nov 18, 2012#72
Originally Posted by Machinist ↑
CTScott, you still have any stalks? I have a 2011 3dr. power doors, locks, etc. Manual trans.
Yes. I will PM you.
rtomDenver, CO · Nov 23, 2012#73
Hi CTScott,

I finally have time for this mod -- so I would be interested in buying what I need for my '09 LB, with manual transmission but no power package.

Please PM me & I'll paypal you the funds. If I need more than just the stalk, please let me know. I recall for MT there is a clutch switch to install?

And yes, I'll re-read your "DIY Cruise Control FAQ (2006-2010 Yaris)" thread -- it has been a few years.

Thanks!
rtomDenver, CO · Nov 23, 2012#74
Too much turkey -- mine's a 2010, not a 2009!
CTScottThread starterUSA, CT · Nov 23, 2012#75
Originally Posted by rtom ↑
Too much turkey -- mine's a 2010, not a 2009!
No problem - PM sent.
SirSchwankChicago, IL · Jan 18, 2013#76
I'm finally looking to add this as well. Do you still have kit for an '07 LB MT?
CTScottThread starterUSA, CT · Jan 18, 2013#77
Originally Posted by SirSchwank ↑
I'm finally looking to add this as well. Do you still have kit for an '07 LB MT?
Yes. I will PM you the info.
jecurtin3dallas · Jan 30, 2013#78
CTScott,

I'll take a kit if you still have one. I have a '09 3dr. Do you take CC's?
UberSilverAlameda,Ca. · Feb 1, 2013#79
Originally Posted by jecurtin3 ↑
CTScott,

I'll take a kit if you still have one. I have a '09 3dr. Do you take CC's?
Me2😁
CTScottThread starterUSA, CT · Feb 1, 2013#80
Pm's sent.
ilikericesavannah, ga · Feb 1, 2013#81
Pm sent =)
futuredeniedky · Feb 24, 2013#82
i need a full set up too! let me know what you can do. Thanks in advance!
CTScottThread starterUSA, CT · Feb 24, 2013#83
Originally Posted by futuredenied ↑
i need a full set up too! let me know what you can do. Thanks in advance!
No problem. I replied to your PM.
DirtKurtNH · Feb 25, 2013#84
Hey would like to get this for my girlfriends Yaris, 2010 4dr HB. power windows and locks. Let me know, Thanks Kurt.
CTScottThread starterUSA, CT · Feb 25, 2013#85
Originally Posted by DirtKurt ↑
Hey would like to get this for my girlfriends Yaris, 2010 4dr HB. power windows and locks. Let me know, Thanks Kurt.
PM sent. By the way, you are about two weeks late. Cruise control would have been the ultimate Valentine's day gift for her.
AlphaFox78Springfield, MA · Mar 27, 2013#86
Scott, I live in western mass and have a 2007 MT liftback, can you PM me the details on all the required part costs, if you have everything and if you could help me install? TY!!
skoffSherbrooke, QC · Mar 27, 2013#87
if you still have some i have a 2007 sedan pm me with details plz! thanks ;)
weedboyMalaysia · Apr 3, 2013#88
Hey dude,

Can you ship it to Malaysia? I wanna fit it to my 09' Vios aka Yaris Sedan.
Let me know how much extra aite!

Cheers!
UberSilverAlameda,Ca. · Apr 3, 2013#89
Have you got an intermittent wiper stalk?😉


Originally Posted by CTScott ↑
I have a couple of brand new, OEM cruise control stalks with the cruise control wire that connects the stalk to the clock spring and the two mounting screws. If you're in the CT area, I can give you a hand with the installation.

$40 shipped to the US, Canada, or PR.

I also have the pins necessary for installing it on a 2008 and older Liftback or a 2009 and older Sedan:

FS: DIY Cruise Control Pin Kits


Attachment 39072
n01tkNS Canada · Apr 25, 2013#90
CTScott, just bought 2008 Yaris sedan ( no power option). My wife wants cruise. Do you have the stalk, jumper cable and connectors. Nova Scotia, Canada
CTScottThread starterUSA, CT · Apr 25, 2013#91
Originally Posted by n01tk ↑
CTScott, just bought 2008 Yaris sedan ( no power option). My wife wants cruise. Do you have the stalk, jumper cable and connectors. Nova Scotia, Canada
PM sent.
henryleeUnited States · Apr 25, 2013#92
Do you have any more stalk, cable, and connector for 2011 sedan?
CTScottThread starterUSA, CT · Apr 25, 2013#93
Originally Posted by henrylee ↑
Do you have any more stalk, cable, and connector for 2011 sedan?
Yes.

Weren't we supposed to have you come up here for me to help you install it?
henryleeUnited States · Apr 26, 2013#94
^ Absolutely. I will purchase the cruise control stalk from you. I wont be back in town till june though. By chance do you also sell fog lights for sedan?
CTScottThread starterUSA, CT · Apr 26, 2013#95
Originally Posted by henrylee ↑
^ Absolutely. I will purchase the cruise control stalk from you. I wont be back in town till june though. By chance do you also sell fog lights for sedan?
I don't stock fog lights, but you can order them from Micro Image and we can install them at the same time.
jcboyAsia · Apr 26, 2013#96
Originally Posted by weedboy ↑
Hey dude,

Can you ship it to Malaysia? I wanna fit it to my 09' Vios aka Yaris Sedan.
Let me know how much extra aite!

Cheers!
the thing is, asian yaris are assembled in thailand and the philippines. scott can't be sure our ecus have cruise control in them, let alone the wiring might be slightly different.

but hey, i'll let scott speak for himself. i'd love to have this mod too, but i have a pending order from scott once i have some cash to spare. (secret lol)
CTScottThread starterUSA, CT · Apr 26, 2013#97
Originally Posted by jcboy ↑
the thing is, asian yaris are assembled in thailand and the philippines. scott can't be sure our ecus have cruise control in them, let alone the wiring might be slightly different.

but hey, i'll let scott speak for himself. i'd love to have this mod too, but i have a pending order from scott once i have some cash to spare. (secret lol)
I somehow missed him asking about that, but you and I did discuss it, and I am pretty sure that Asian area Yaris of that vintage did not support cruise control. One way that we can check is to check the voltage (with the ignition switch in the ON position) of the ECM connector A21 pin 40 (that is the pin location where a pin gets added per my DIY). If we see +12 V on that pin with the ignition on, then theoretically cruise exists for that car. If we see 0 V on that pin, then it definitely does not.
LairBirmingham, AL · May 27, 2013#98
I need a cruise kit for my '09 3 door. It's an automatic with no power options.

Please PM your Paypal addy and l'll pay ASAP.

Thanks!
CTScottThread starterUSA, CT · May 27, 2013#99
Originally Posted by Lair ↑
I need a cruise kit for my '09 3 door. It's an automatic with no power options.

Please PM your Paypal addy and l'll pay ASAP.

Thanks!
PM sent
LairBirmingham, AL · Jun 1, 2013#100
Received the kit yesterday, and installed it today. Thanks for the quick shipping!

Originally Posted by CTScott ↑
You can definitely handle it. With my DIY many who have never touched any wires in a car have self installed it.

DIY: 2006-2011 Yaris OEM Cruise Control Complete Installation
Installed my kit in less than 20 minutes, and I wasn't even in a hurry. The later cars ('09+) are really easy. The pdf was a big help, and I just happened to have a Unibit that was the proper size for the stalk hole.

Thanks for the thread, the instructions, and the kit. You seriously made my day. I wish I'd done this when i bought the car.

If you ever come up with a central locking kit, I'll be the first one in line to buy it. 👍