Yarisworld Archive

Changing interior lights

82 posts · 39,074 views · page 1 of 2

.Kevin.Original postPrince George, BC. Canada · Oct 13, 2010#1
Hi everyone how do I get all my interior colored specifically like red or blue etc any DIY guides or links to bulbs I have a 2010 yaris and I hate the yellow lighting dont know what it is but yellow hurts my eyes bad even when its sunny out I wear blue colored shades and all the bulbs in my house are specifically white just for me lol

appreciate this alot and how much it would cost avg to have all my interior lit up

Replies 81

Kaotic LazagnaCentral Valley, CA · Oct 13, 2010#4
Trunk in the sedan is also a 194 wedge (I have 3 6" strips in the back converging to the 194 holder). The license plate lights are also 194 (IIRC).
.Kevin.Thread starterPrince George, BC. Canada · Oct 13, 2010#5
How did you get those blue lights, got any links to the specific bulbs, I suck ass at anything involving wiring or codes feels bad man.


Wanted to change the interior roof ones, feet if possible, and trunk one would be sweet.

is it like any other light bulb unscrew and screw in or what
Kaotic LazagnaCentral Valley, CA · Oct 13, 2010#6
Originally Posted by .Kevin. ↑
How did you get those blue lights, got any links to the specific bulbs, I suck ass at anything involving wiring or codes feels bad man.


Wanted to change the interior roof ones, feet if possible, and trunk one would be sweet.

is it like any other light bulb unscrew and screw in or what
I actually hate the fact that the blue ones are blue. I ordered "white" LED strips on eBay to use for footwell and engine bay lighting, but each time, they came out blue. It's a little more involved to install footwell lighting as you will have to splice into two wires behind the driverside glove/coin compartment. But CTScott told me which wires to splice into (there's a picture floating somewhere here as well), and it's just a matter of hiding the wires (you'll also have to solder wires onto the LED strip because it won't be long enough if you don't). It's not hard, but like I said, more involved.

The dome, map, trunk, and license plate lights just pull out (no unscrewing) once you get their respectable covers off. If you're planning on using strips for the trunk, you'll need to purchase a 194 holder (I believe the link I gave you sells holders [look at the left side of either page]). Just remember, put in the LED, test to see if they turn on (if they don't take out the LED and flip it, then put it back in).

You can purchase the strips from the site I gave you, or just search on eBay for either blue or white (will most likely come out blue) LED strips in eBay motors.
.Kevin.Thread starterPrince George, BC. Canada · Oct 13, 2010#7
I guess I will swap the pull out ones since the others involve more complicated stuff, I would pay to get it done but no one here lives nearby.

Is it possible to get colored dome ones and take off the dome caps and just replace em or what
custom LftbackHouston, TX · Oct 13, 2010#8
My light conversion cost me about $50. Dome light, map lights, parking lights, liscense plate light, A/C lights, and my the gear light next to my shifter
ross sezWestern MA · Oct 13, 2010#9
Originally Posted by .Kevin. ↑
I guess I will swap the pull out ones since the others involve more complicated stuff, I would pay to get it done but no one here lives nearby.

Is it possible to get colored dome ones and take off the dome caps and just replace em or what
If you want different colors, just buy the different colored LEDs. You dont need to change the dome/map, etc.. lights' cover for the color effect.
derickveliz2Central, MA · Oct 13, 2010#10
.
Tail lights:
Picture not included in this copy
LINK


License Plate and Trunk:
Picture not included in this copy
LINK


Map Lights:
Picture not included in this copy
LINK


Dome Lights
2 of this in natural white...
Picture not included in this copy
LINK



Rear turn signals:
Picture not included in this copy
LINK



Head Lights and Fog Lights

HID 5000k and 3000K (fog lights)

Picture not included in this copy

I hope it helps!

.
.Kevin.Thread starterPrince George, BC. Canada · Oct 13, 2010#11
Thanks for all the links, atm I wanna change the two in the front that you push to turn on and the one in the middle of the roof inside, red would be nice got any link to that and how do I go abouts taking those covers off without damaging anything.

Thanks for dedicating the time, I actually like all the stock lights on the exterior
chrisjS. Jesus, Kentucky · Oct 13, 2010#12
^ Map light covers are easier taken off if you push up on one at a time like you're turning it on. Then put a screwdriver in and pop it down. I couldn't find an easy way into that light cover until I accidentally pushed up on it, then popped it out in 1 second. Goes back in really easy too.

On the dome there is a place on the edge to put a screwdriver in the pop it off.

I changed out my whole interior in like 2 minutes. Simple. Best thing is, it's so easy to change that if you get tired of one color, go with something else. Go with green and red for Christmas! ;)
.Kevin.Thread starterPrince George, BC. Canada · Oct 13, 2010#13
Alright freaking sweet man now to find the bulbs for it - any help apprecciated lookin for red mostly
QmobileHoytville, ohio · Oct 13, 2010#14
the more and more people I see doin this kinda conversion the more and more I want to do it!!
.Kevin.Thread starterPrince George, BC. Canada · Oct 13, 2010#15
Let me know if youre interested in helping eachother out finding the bulbs :o

edit:

Are dome lights the top 3 inside the car>? Those are the ones I want to change if so are these the bulbs for it,

http://www.v-leds.com/Interior-LED/D...10359-1-2.html
pspeezyOrange County, California · Oct 13, 2010#16
Originally Posted by Kaotic Lazagna ↑
Trunk in the sedan is also a 194 wedge (I have 3 6" strips in the back converging to the 194 holder). The license plate lights are also 194 (IIRC).
so let me get this straight, 194 wedge type for map, trunk, and license plate lights?
(for my 09 yaris sedan, thats 2 map lights, 2 license plate lights, 1 trunk light)
so when buying bulbs for these 5 lights, i should buy 5 of the same kind, correct?
then just a festoon bulb for the dome light?

also what does 'IIRC' mean?
.Kevin.Thread starterPrince George, BC. Canada · Oct 13, 2010#17
It'd be nice if my stuff got clarified first before we ask more questions

and me and the other guy have 2010s lol
pspeezyOrange County, California · Oct 13, 2010#18
Originally Posted by .Kevin. ↑
It'd be nice if my stuff got clarified first before we ask more questions

and me and the other guy have 2010s lol
well excuse me for crowding your thread,
i didnt think two questions at once would be too much of a nuisance for him to answer. my apologies.
.Kevin.Thread starterPrince George, BC. Canada · Oct 14, 2010#19
Didn't mean it like that, I meant we might have to look for our own answers since he hasnt been back to the thread. I am eyeing those red ones though any idea if they will work?
chrisjS. Jesus, Kentucky · Oct 14, 2010#20
I have a LB, so a few of mine will be somewhat different. The wedge-type 194 LEDs go into the map lights. The festoon bulb (or the LED cluster with an adjustable festoon type connector) goes into the dome.

In my license plate light, it is another 194 wedge type. In my cargo area it's another festoon bulb. In another thread I posted exactly what I ordered for mine, but I did order from www.superbrightleds.com.

Then it just comes down to how bright you want it and what color you want. There is also the degree of coverage for the festoons, as some have all around coverage, some have 90 degree, some have 120 degree.

I will post more exact information if you need it, but I am not exactly sure of the festoon sizes. They were different for the dome and cargo area. Dome was 32mm and the cargo area was 37mm I believe. There are cross references on the superbright site.
.Kevin.Thread starterPrince George, BC. Canada · Oct 14, 2010#21
What is the name of the 3 lights in the inside of the vehicle

the two push ones and the switch one that turns on with the door opening

those are the bulbs I need x,x in red
pspeezyOrange County, California · Oct 14, 2010#22
Originally Posted by .Kevin. ↑
What is the name of the 3 lights in the inside of the vehicle

the two push ones and the switch one that turns on with the door opening

those are the bulbs I need x,x in red
the two push ones in the front are called map lights,
and the switch one in the middle is called a dome light,

(and obviously trunk light(s) is/are inside the trunk and license plate lights are the ones above your license plate)

im ordering my lights on friday, im not sure if it is different for 09 to 10, but the only festoon bulb i need is for my dome light, and the rest are 194 wedge type bulbs (map, trunk, and i believe on my license lights as well but not 100% sure)

for the festoon bulb for my dome light, i measured today in my car with a ruler, centimeters then converted to milimeters (1 centimeter = 10 milimeters) to know exactly what size (in milimeters) the festoon bulb should be.

(i suggest you do the same to be 100% sure, cause i feel more comfortable ordering my bulbs now that i have opened all of them up and checked them out)
.Kevin.Thread starterPrince George, BC. Canada · Oct 14, 2010#23
Originally Posted by pspeezy ↑
the two push ones in the front are called map lights,
and the switch one in the middle is called a dome light,

(and obviously trunk light(s) is/are inside the trunk and license plate lights are the ones above your license plate)

im ordering my lights on friday, im not sure if it is different for 09 to 10, but the only festoon bulb i need is for my dome light, and the rest are 194 wedge type bulbs (map, trunk, and i believe on my license lights as well but not 100% sure)

for the festoon bulb for my dome light, i measured today in my car with a ruler, centimeters then converted to milimeters (1 centimeter = 10 milimeters) to know exactly what size (in milimeters) the festoon bulb should be.

(i suggest you do the same to be 100% sure, cause i feel more comfortable ordering my bulbs now that i have opened all of them up and checked them out)
What ya mean measure it, and does that mean that last link I posted with the Red LEDS will fit on the map and dome lights?
pspeezyOrange County, California · Oct 14, 2010#24
Originally Posted by .Kevin. ↑
What ya mean measure it, and does that mean that last link I posted with the Red LEDS will fit on the map and dome lights?
for the festoon bulb for the dome light, they have it in different lengths, so if you order the wrong one it might be too long or too short. the measurement they use to measure the festoon bulbs are in milimeters.


for those red lights you posted in the link,
i honestly have no clue if those will work, because the thing that makes me iffy on those bulbs is the way they are designed. if you open up your dome light cover in your car, and take a look at your stock bulb, you will see what im talking about and how they look different.

i am also new to these light bulbs and knowing what is what, so i am not 100% sure, and you might want to wait for somebody who does know 100% to get a confirmation on that.

a festoon bulb looks like this.
for my car (which might be different from yours but im not sure) im ordering the
'3022-xHP4
31 x 10mm festoon bulb with 4 High Power SMD LEDs' for my dome light.



edit: im actually ordering the '3022-x4 & 3022-x9
31 x 10mm festoon, 4 or 9 x 3mm LED, 30 degree beam' bulb for my dome light because the high power festoon bulb doesnt have the color i want
Kaotic LazagnaCentral Valley, CA · Oct 14, 2010#25
Originally Posted by pspeezy ↑
so let me get this straight, 194 wedge type for map, trunk, and license plate lights?
(for my 09 yaris sedan, thats 2 map lights, 2 license plate lights, 1 trunk light)
so when buying bulbs for these 5 lights, i should buy 5 of the same kind, correct?
then just a festoon bulb for the dome light?

also what does 'IIRC' mean?
Yes, that is correct. However, I suggest getting a strip for the trunk and use a 194 holder. A single 194 LED won't illuminate the trunk very well.

Yup, that festoon I posted for the dome light.
Kaotic LazagnaCentral Valley, CA · Oct 14, 2010#26
Originally Posted by .Kevin. ↑
Thanks for all the links, atm I wanna change the two in the front that you push to turn on and the one in the middle of the roof inside, red would be nice got any link to that and how do I go abouts taking those covers off without damaging anything.

Thanks for dedicating the time, I actually like all the stock lights on the exterior
Take a thin flat head screw driver. Look at the map/dome light covers, You'll see some "lines" at the edges (of the long side I believe). Insert the screw driver there, and gently pry off. If you'd like, remind me after 10 am (Pacific time) later today, and I'll take pics of the process.
Kaotic LazagnaCentral Valley, CA · Oct 14, 2010#27
Don't think the model year on the sedans are different for light bulbs, btw.


Oh, and for the one that ask, "IIRC" means "if I remember correctly."
Kaotic LazagnaCentral Valley, CA · Oct 14, 2010#28
For the footwell lighting, splice into the wires seen here:

Wires Inside the Yaris & What They Do


So, splice the positive wire into the blue, and the negative/ground wire to the pink wire.
Kaotic LazagnaCentral Valley, CA · Oct 14, 2010#29
I also made my own LED strip for the rear feet area (since changed to two LEDs instead of three).

Picture not included in this copy


For this, I just spliced the wires on the LED footwells and ran the wires as seen:
Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

They're attached to the bottom of the front strips via velcro.
Kaotic LazagnaCentral Valley, CA · Oct 14, 2010#30
^ Yeah, I had a few spare 194 LEDs laying around, figured might as well use them. lol.
.Kevin.Thread starterPrince George, BC. Canada · Oct 14, 2010#31
Well good news is before reading your thing I went to my car and grabbed my screw driver and I managed to easily take off the 3 plastics so I know how to do that now.

As for the bulb I tried to twist and pull gently and just pull it didnt come out, how exactly do I get it out.

And could I possibly get someone to give me the correct link to the bulbs I need to get this done.

I was also looking for the plug in under the steering wheel above the pedals and I couldnt find the thing where the ecometre apparently plugs in
Kaotic LazagnaCentral Valley, CA · Oct 14, 2010#32
Originally Posted by .Kevin. ↑
Well good news is before reading your thing I went to my car and grabbed my screw driver and I managed to easily take off the 3 plastics so I know how to do that now.

As for the bulb I tried to twist and pull gently and just pull it didnt come out, how exactly do I get it out.

And could I possibly get someone to give me the correct link to the bulbs I need to get this done.

I was also looking for the plug in under the steering wheel above the pedals and I couldnt find the thing where the ecometre apparently plugs in
Try wearing rubber gloves to remove the bulbs from the map lights (they're a little hard to remove if you have sweaty or oil finger tips). The dome light one should come off easily by pulling down.

Here is the you need for the map lights (just order 1 qty as they come in a pair): http://www.v-leds.com/Exterior-LED/C...78377-1-2.html

This is for the dome light: http://www.v-leds.com/Interior-LED/D...08258-1-2.html

They're both 6000k in color, so it should be the same as the ones I have for my map and dome lights (my trunk is 5000k, and I have no clue what the footwells are, but I'm assuming they're 8000k in color temp).
Kaotic LazagnaCentral Valley, CA · Oct 14, 2010#33
Oh, and the wires are located behind the coin compartment. You'll have to remove it to see the wires.
.Kevin.Thread starterPrince George, BC. Canada · Oct 14, 2010#34
Do they have the same lights but in Red, I noticed on the site they have a red option on the side.

and coin compartment, you mean the side pocket thing bottom right of the steering wheel.
Kaotic LazagnaCentral Valley, CA · Oct 14, 2010#35
Originally Posted by .Kevin. ↑
Do they have the same lights but in Red, I noticed on the site they have a red option on the side.

and coin compartment, you mean the side pocket thing bottom right of the steering wheel.
I mean that pull out compartment to the bottom left of the steering wheel.

Here are some red ones.

Clearance price for this for the map lights, although I'm not sure if they will fit: http://www.v-leds.com/Interior-LED/D...10359-1-2.html

Here's a red version of the one I posted earlier for the map light: http://www.v-leds.com/Interior-LED/D...00687-1-2.html

Red one for the dome light: http://www.v-leds.com/Interior-LED/D...98487-1-2.html
Kaotic LazagnaCentral Valley, CA · Oct 14, 2010#36
Time to sleep, gotta get up in 4 hours.
.Kevin.Thread starterPrince George, BC. Canada · Oct 14, 2010#37
nice man thanks so much appreciate it ill look for that compartment tmr, I also wake up in 4 hours, btw why is that one light a chip

GOODNIGHT ttytmr guys
Kaotic LazagnaCentral Valley, CA · Oct 14, 2010#38
Originally Posted by .Kevin. ↑
nice man thanks so much appreciate it ill look for that compartment tmr, I also wake up in 4 hours, btw why is that one light a chip

GOODNIGHT ttytmr guys
WWWOOOOOPPPSSSS. Don't buy the one that looks like a chip. I clicked on the wrong one (although you can use it, but just won't have any light pointing down). Either one of these is the one you need:

http://www.v-leds.com/Exterior-LED/P...04683-1-2.html

http://www.v-leds.com/Interior-LED/D...10359-1-2.html
.Kevin.Thread starterPrince George, BC. Canada · Oct 14, 2010#39
so those two links and the others except the chip one o,o thanks man sorry for the questions just tryin to get these links organized for tmr
pspeezyOrange County, California · Oct 14, 2010#40
Originally Posted by Kaotic Lazagna ↑
Yes, that is correct. However, I suggest getting a strip for the trunk and use a 194 holder. A single 194 LED won't illuminate the trunk very well.

Yup, that festoon I posted for the dome light.
thanks man! im ordering my lights tomorrow 👍
Kaotic LazagnaCentral Valley, CA · Oct 14, 2010#41
Originally Posted by .Kevin. ↑
so those two links and the others except the chip one o,o thanks man sorry for the questions just tryin to get these links organized for tmr
I was a little confusing. Okay,

for the map lights, you should get this: http://www.v-leds.com/Exterior-LED/P...04683-1-2.html

Or you can try this (it's just 5 bucks), but not guaranteeing that it will fit: http://www.v-leds.com/Interior-LED/D...10359-1-2.html

For the dome light, you need this: http://www.v-leds.com/Interior-LED/D...98487-1-2.html
Kaotic LazagnaCentral Valley, CA · Oct 14, 2010#42
Originally Posted by pspeezy ↑
thanks man! im ordering my lights tomorrow 👍
No problem, don't forget to post pics when you get them installed.
.Kevin.Thread starterPrince George, BC. Canada · Oct 15, 2010#43
Went to change them and I fucked something up now they wont turn on and my dome light wont AND my radio wont what the hell happened!?!?!
.Kevin.Thread starterPrince George, BC. Canada · Oct 15, 2010#44
bump need help. ps im still under waranty would they notice if i just said i went over a speed bump i heard a spark and something happened or what.
chrisjS. Jesus, Kentucky · Oct 15, 2010#45
I know this is a stupid question, but you checked the fuses?
.Kevin.Thread starterPrince George, BC. Canada · Oct 15, 2010#46
are those under the hood on yaris'?

I am so clueless on this crap and I am shitting bricks bro lol

why would that be a stupid queston
chrisjS. Jesus, Kentucky · Oct 15, 2010#47
:) They should be under the dash. The radio and other fuses are there. Left side down under the cup holder.
chrisjS. Jesus, Kentucky · Oct 15, 2010#48
Yaris uses those odd little tiny fuses. I had 2 other kinds of fuses here at home and had to go to the auto parts store for the ones for the Yaris. I blew one when I was changing out my tails.

Hey Kevin, what did you do when you say you f*cked with it? You were in the process of changing out to LEDs, right?
.Kevin.Thread starterPrince George, BC. Canada · Oct 15, 2010#49
One of the black clips was loose and when I twisted it I pushed it in, being retarded I tried using a screw driver to get it now its jammed in there with the bulb and I heard a like short curcuit little spark noise when I spun the driver around.

Thats basically the story and now my stereo wont work, my map lights and dome lights. not sure if anything else

what should I do from what ive explained
chrisjS. Jesus, Kentucky · Oct 15, 2010#50
You probably just blew a fuse. Same kinda thing happened to me when I changed my tails. Just check the fuse box under the dash and you'll probably see a blown one or two.

You also need to get any piece of metal that doesn't belong in that light or it will just blow again.

You normally shouldn't have to disconnect the battery to change out lights, but you might want to until you are sure you get them all in properly. Just a thought.