Yarisworld Archive

Changing interior lights

82 posts · 39,074 views · page 2 of 2

Replies continued

.Kevin.Thread starterPrince George, BC. Canada · Oct 15, 2010#51
how the hell do I get the black clip and the bulb out of the map lights thing ? And how do I know a fuse is blown, I am retarded I know lol. Does it have to be specific colored? The car has extra fuses in the boxi n the motor area doesnt it

if we get this fixed I will fucking praise whoever helps me I swear to god.
chrisjS. Jesus, Kentucky · Oct 15, 2010#52
You can look at a good fuse and a bad one and see the link melted in it to show it's bad. That's true on any fuse. Don't know about spares. I had to go down to the auto store with no taillights until I got some spares.

I don't know what black clip you mean, but you can stick anything you want in there now, if the fuse is blown...it sure won't hurt anything now. On my LB, it was just a pull out and plug in for the new bulbs. It's the wedge bulb right?
.Kevin.Thread starterPrince George, BC. Canada · Oct 15, 2010#53
THe problem is the bulb and black thing went INSIDE the like little console that holds the bulbs.

And you know the black thing wrapped around the bulb that you twist etc?

That went inside. I have no idea how to get the bulb out and have that black clip in place again was tempted to just rip off the whole plastic thing but got scared of fucking something p.

Like I said, shitting bricks atm wanna fix this so bad I will get pics up of my new bulbs if I manage to fix this aswell.
chrisjS. Jesus, Kentucky · Oct 15, 2010#54
Shit! Sorry man, I don't know from here. Wish I could help, but that black piece going up into the thing is past me. Still, you should be okay driving it and stuff. Someone will be on later I'm sure that can help in a flash.
.Kevin.Thread starterPrince George, BC. Canada · Oct 15, 2010#55
It's wrapped around the bulb if you remove the plastic button light cover thing you should see it.

I will report back in a few minutes I am gonna go check out for the fuse thing.
Kaotic LazagnaCentral Valley, CA · Oct 15, 2010#56
hmmm, I've changed out interior lights in several cars, and not one of them have any black thing around the light bulbs (I can't figure out why there would be anything around a light bulb to begin with).

A blown fuse looks like this:
Picture not included in this copy

That middle part should be one piece, not two, for a non-blown fuse. Fuses are a little hard to remove, so pinch tight. hahahaha. I've used needle-nose pliers to gently pull them out too.
.Kevin.Thread starterPrince George, BC. Canada · Oct 15, 2010#58
searched failed I know what youre talkin about now I will go look for a broken one, if I replace it do I need to use a specific one or just one of the spares inside the thing?

Will take photos aswell.
Kaotic LazagnaCentral Valley, CA · Oct 15, 2010#59
Originally Posted by .Kevin. ↑
searched failed I know what youre talkin about now I will go look for a broken one, if I replace it do I need to use a specific one or just one of the spares inside the thing?

Will take photos aswell.
Under the cover, there's a diagram of the layout of the fuses (what the fuse is for). Look for the one that the dome light uses (I think it should say DOME on the diagram). Remove and inspect it. Also, there should be a number on the top of the fuse; i.e. 5, 10, 15, etc. You need to replace it with that same amperage. If none of the replacement fuses are of the amperage of the dome fuse, you can take it to any automotive shop or Radio Shack (if you guys have those up there) and hand them the fuse and ask for a replacement. There are different sizes of fuses, I think the ones in the fuse box are mini fuses.
.Kevin.Thread starterPrince George, BC. Canada · Oct 15, 2010#60
Alright follow me on this

Went to the fuses Blue 15 was blown I swapped it and my car wouldnt turn on lol so I need another blue 15 fuse where do I get them.

Second of all some photos of the lights, left side is how it should be its fine. Right side has the bulb INSIDE the hole, and look at the left, that black thing is what keeps it in place, it is also INSIDE I have to somehow get them out was thinkin tweezers or something.

Ideas?

Any questions?

5 attachments not included in this copy

.Kevin.Thread starterPrince George, BC. Canada · Oct 15, 2010#61
bump
Kaotic LazagnaCentral Valley, CA · Oct 15, 2010#62
You'll need a 15 amp fuse to replace.

As for the light bulb, I think you push the base/bulb connector inside. That's where the bulb goes connects to. Do you know where it's at?
Kaotic LazagnaCentral Valley, CA · Oct 15, 2010#63
Where is the bulb, anyway?
chrisjS. Jesus, Kentucky · Oct 15, 2010#64
Oh shit. I see that the socket has been turned and is up in there. I have no idea how to get it out.

Looks like you'll have to pop off the whole map light to get that socket back out. It must have been turned and then went back up in there. The taillights are the same, with their sockets. As far as the bulb, it just comes straight out since it's a wedge.
.Kevin.Thread starterPrince George, BC. Canada · Oct 15, 2010#65
Where do I get a fuse dealership? How much are they.

And yeah the bulb and the twist thing is INSIDE that shit, how to I remove it without damaging anything? Or should I just take it to the dealer and yell waranty on their asses that I went over a speed bump and shit hit the fan.
Kaotic LazagnaCentral Valley, CA · Oct 15, 2010#66
Originally Posted by .Kevin. ↑
Where do I get a fuse dealership? How much are they.

And yeah the bulb and the twist thing is INSIDE that shit, how to I remove it without damaging anything? Or should I just take it to the dealer and yell waranty on their asses that I went over a speed bump and shit hit the fan.
Like I mentioned earlier, fuses can be bought at any automotive store or electronic store. Again, it's a 15 amp fuse, most likely a mini blade fuse.

I have no clue how to remove the map light assembly. Sorry.
Kaotic LazagnaCentral Valley, CA · Oct 15, 2010#68
However, they look like retainer clips. If you have a very thin flat head screw driver, I'm sure you can disengage them easily.
.Kevin.Thread starterPrince George, BC. Canada · Oct 16, 2010#69
Moulding remover, the hell.

I will put something soft on my head and attempt to take it off, as for the fuses once again, do I go to the dealer for them? o,o


thanks btw for the help this is so intense, love you all.
Kaotic LazagnaCentral Valley, CA · Oct 16, 2010#70
Originally Posted by .Kevin. ↑
Moulding remover, the hell.

I will put something soft on my head and attempt to take it off, as for the fuses once again, do I go to the dealer for them? o,o


thanks btw for the help this is so intense, love you all.
You can, but the dealership will always charge WAY more than a regular auto parts store. Just go to a parts store or electrical shop and show them the blown fuse.
.Kevin.Thread starterPrince George, BC. Canada · Oct 16, 2010#71
Originally Posted by Kaotic Lazagna ↑
You can, but the dealership will always charge WAY more than a regular auto parts store. Just go to a parts store or electrical shop and show them the blown fuse.
Alright cool thanks, and my mission..

*sigh*

Was a failure, no idea how to do this. Screw driver failed, and I have no idea where to get this molding tool, maybe Canadian tire? If not do I take my car to the dealer ship and say I went over a speed bump a fuse died and one of my bulbs came loose inside the map light console?

I also bought some crap for my car but dont wanna take pictures with this crappy situation going on but when I get it fixed and pop my LED bulbs in hopefully I can take photos.

Dont wanna pay for something so retarded x,x
Kaotic LazagnaCentral Valley, CA · Oct 16, 2010#72
Originally Posted by .Kevin. ↑
Alright cool thanks, and my mission..

*sigh*

Was a failure, no idea how to do this. Screw driver failed, and I have no idea where to get this molding tool, maybe Canadian tire? If not do I take my car to the dealer ship and say I went over a speed bump a fuse died and one of my bulbs came loose inside the map light console?

I also bought some crap for my car but dont wanna take pictures with this crappy situation going on but when I get it fixed and pop my LED bulbs in hopefully I can take photos.

Dont wanna pay for something so retarded x,x
No way they are going to believe you if you tell them that a speedbump caused your fuse to blow.

What auto parts stores do you have up there? One of them is bound to carry a molding remover tool.
chrisjS. Jesus, Kentucky · Oct 16, 2010#73
Kevin, is there no way to get needle nose pliers in that hole or something just to get it close so you can grab it? If you can get hold of it any at all, you might be able to maneuver the socket back into its slot. It's a totally shitty situation, I know.
.Kevin.Thread starterPrince George, BC. Canada · Oct 16, 2010#74
I live in prince george bc I havent seen shit all for auto stores, except canadian tire lol

and nope, I even tried my girlfriends tweezers and a needle to shape it in, the problem is how the hell do i twist it without pushing it in again AND moving it around is impossible ive tried until my arms are sore from being held up lol. Even the lightbulb is in there but I cant see it, maybe if I found this molding remover or whatever it might help.


What could I say to make them believe me then? lol im fucked paying for nothing bah this BLOWS
Kaotic LazagnaCentral Valley, CA · Oct 16, 2010#75
Those retainer clips have to be disengaged one at a time. Start disengaging one, and lightly pull down on the molding until it doesn't pop back in anymore. Stick the end of a Q-tip in, and proceed to disengage the other clips, and do the same (Q-tip and move on) until all four are disengaged. Then it should come off. I've disengaged moldings before by using a small, thin flat head. Sure, it took a while compared to having that molding remover tool, but I don't want to spend extra money if I can improvise. hahahaha. By small and thin, I mean pocket size.
Kaotic LazagnaCentral Valley, CA · Oct 16, 2010#76
Also, if worse comes to worse, order that tool online.
.Kevin.Thread starterPrince George, BC. Canada · Oct 16, 2010#77
Originally Posted by Kaotic Lazagna ↑
Those retainer clips have to be disengaged one at a time. Start disengaging one, and lightly pull down on the molding until it doesn't pop back in anymore. Stick the end of a Q-tip in, and proceed to disengage the other clips, and do the same (Q-tip and move on) until all four are disengaged. Then it should come off. I've disengaged moldings before by using a small, thin flat head. Sure, it took a while compared to having that molding remover tool, but I don't want to spend extra money if I can improvise. hahahaha. By small and thin, I mean pocket size.
I used a standard screw driver i even dropped theh eadu nder the seat and lost it haha.

Got a photo of the type of screwdriver you mean? Btw thanks so much guys for trying to help never even met someone this compassionat irl I feel weird.
Kaotic LazagnaCentral Valley, CA · Oct 16, 2010#78
I'll try to remember to take some pics later today.
.Kevin.Thread starterPrince George, BC. Canada · Oct 17, 2010#80
FIXED IT!! YESSSS
.Kevin.Thread starterPrince George, BC. Canada · Oct 18, 2010#81
Like promised some photos

4 attachments not included in this copy

chrisjS. Jesus, Kentucky · Oct 18, 2010#82
Glad you got it done! Looks good!