hey im going to put a turbo on my 09 yaris i know how to install a turbo and what not but not on a yaris the ? i have are where is the best plase to put the bov how it tap for a vac/boost gauge and what lines to hook up the bov any help will be great-full and when done ill post pic and dyno sheets
soom boost ?
6 posts · 4,157 views
Replies 5
I don't mean to sound like a hardass, but have you looked around this forum? check Focus_Sh1ft's and pimp my yaris' threads, they're more or less step by step, in fact Focus_Sh1ft even went through the trouble of documenting everything into an installation guide ;)
Your all good man I did try looking I just couldn't find anything ill give those a look thanks
I have my boost guage and BOV tapped off my evap. purge solinoid vac. line. I used a couple of vaccume T's. This line is easy accessible next to T-body. The purge control solinoid is only open during idle, so it does not affect readings on guage.
Not quite true. It'll open under cruising conditions.Originally Posted by pimp my yaris ↑I have my boost guage and BOV tapped off my evap. purge solinoid vac. line. I used a couple of vaccume T's. This line is easy accessible next to T-body. The purge control solinoid is only open during idle, so it does not affect readings on guage.
I've overfilled my tank on a cool night and the next day when it got hot out, and after the gas had expanded, the EVAP valve open while cruising down the road at 60Km/h and the car started to stall. Needless to say it was dumping raw gas through the vacuum line and flooding the motor.
But it's only happen 2 time in over 100K km, and only by over filling the tank.