AstromanOriginal postWenatchee, WA · May 18, 2010#1Ok, so I've decided my next performance mods will be to help the car breath easier. I've already done the CAI and DC Sports header, and as of right now the rest of the IHE system is stock.
My plan is to use the 1ZZ throttle body (spacer if it's a good idea, might go nitrous), remove one of the catalytic converters and go full custom exhaust after that. The shop that will be doing the exhaust bent and installed the 3" setup and intercooler piping on my Lebaron and they did a great job for around $400 so I will be going back there again. Where I live there are no inspections, but I do want to keep one of the cats, or replace it with a high flow variety (which I did on the Lebaron).
What should I be looking for? I've read the '05 Corolla TB will work but I wanna know exactly what I will need to do to make this work, along with what type of muffler I should be using. I'm wanting it to sound nice but not ricy at WOT, have a nice idle sound, but at cruising be relatively quiet. I'm also thinking a dual-tip center exit as I won't ever be reinstalling a hitch again.
So, lets see what you all have to say about this, bonus points for those who've actually done these things. Also, anyone have any idea how much extra power this might free up?
Replies 62
SLIK4Clearwater, Kansas · May 18, 2010#2as far as muffler goes i've heard good things about magnaflows sound. going full exhaust might free up 5 hp...🤷
06silveryarisPuerto Rico · May 18, 2010#3I run a thrush muffler with all factiry piping and it has a good solid sound. And no drone at highway speeds. Plus t was like $23 or something like that at advanced auto
PETERPOOPOahu · May 18, 2010#4i say wait for the MI turbo kit to come out...
largeorangefontSo Cal, OC · May 18, 2010#5This will free up about 2-3 HP.
You will want to use a Thrush or turbo style muffler. A Magnaflow will drone pretty bad.
I have an Imco turbo style muffler on my car. It has been great.
dean_parkWentzville, MO · May 19, 2010#6you could get that OBX header back that's on eBay. Another member bought it and it actually deleted the cat's... it looked nice and it's a bolt on and I think it was $225 shipped.
The SpectacleTampa, FL · May 19, 2010#7 Originally Posted by
largeorangefont ↑ This will free up about 2-3 HP.
You will want to use a Thrush or turbo style muffler. A Magnaflow will drone pretty bad.
I have an Imco turbo style muffler on my car. It has been great.
I have a Magnaflow, it doesn't drone.
i have a res-back exhaust it net me 5 whp
AstromanThread starterWenatchee, WA · May 19, 2010#9great input. I was thinking of either the turbo style or magnaflow so it was great to hear both being mentioned. I had the vitz trd axleback and it gained 2hp, so I'm hoping for at least 5+ with the upcoming setup. I would love to go turbo but as long as this is my daily it aint happenin.
Still would like to hear from the TB people. I put a 52mm on my lebaron beast and it was amazing what it did for that car.
AstromanThread starterWenatchee, WA · May 26, 2010#10Ok throttle body on its way, now just for the custom exhaust.
the Tb gave about 3 whp for me
this is my dyno chart
Yaris Dyno charts i have not dynoed it yet with the custom exhaust i have now. but i am pretty sure i am sitting at 118whp
cali yarisCanoga Park, CA · May 26, 2010#12^ Dyno chart says 103 whp. You think going from a TRD exhaust to a custom exhaust got you 15 whp?
meanwhile, I liked my Magnaflow and it didn't drone. Now I like my Vibrant even better.
TheSilkySmoothNew Hampshire · May 26, 2010#13The cam phasing gives the most power - this is whats cuting power. - the VVTi. the TB is plenty big enough stock. The It only has to be 1. 7 X the diameter of one intake runner. You would need a larger intake and head work and stiffer valve springs to get better breathing. Again the cam advance is killing power - got to find a way to really retard can timing above 4k rpm. I did this by "accident" in the winter, running M1 AFE and the bosch filter with the filtech media ( purolator style unit) This had low oil flow and retarded the cam an the car was ultra racy. All the power you would want.
AstromanThread starterWenatchee, WA · May 28, 2010#14Just got the 1zz TB installed and so far no CEL. What amazed me is how much nicer the car sounds! Can't wait to get it out on the open road. My mechanic drove while I rode and he was pretty impressed with how responsive the car is now. 😁
ddongbaphay · May 28, 2010#15Wait..
*checks thread section*
Okay, you're fine. If this were general, those fuel econ boys would be all up in yo grill.
Originally Posted by
cali yaris ↑ ^ Dyno chart says 103 whp. You think going from a TRD exhaust to a custom exhaust got you 15 whp?
meanwhile, I liked my Magnaflow and it didn't drone. Now I like my Vibrant even better.
look again... second dyno says 111.89whp. This was before the i did my custom exhaust.
But here is an idea not sure if it would work. Buy the xa S/C kit and replace your TB with one from an xa ,then you shouldn't have to worry about making an adapter. Or cheaper yet get that weapon r intake manifold i have been hearing about with the xa TB... Just a thought.
AstromanThread starterWenatchee, WA · May 28, 2010#17 Originally Posted by
ddongbap ↑ Wait..
*checks thread section*
Okay, you're fine. If this were general, those fuel econ boys would be all up in yo grill.
LOL
Weird thing is, my Scangauge shows I'm getting amazing mileage right now (well, not RIGHT now. Right now the car is parked and off) in the high 30s to low 40s. Usually when I zip around town it's in the 20s 🙄
Idle was rough after the first test drive, felt like it was surging, then I did throw a check engine light (which I cleared) on the 3rd drive. When I stopped one of the hoses had come undone as the new coupler is a little longer than the stock one. I dunno if my mechanic had forgot to hook it up or it came off. If it does it again I'll just trim the coupler so it fits better.
ddongbaphay · May 28, 2010#18 Originally Posted by
Astroman ↑ LOL
Weird thing is, my Scangauge shows I'm getting amazing mileage right now (well, not RIGHT now. Right now the car is parked and off) in the high 30s to low 40s. Usually when I zip around town it's in the 20s 🙄
Idle was rough after the first test drive, felt like it was surging, then I did throw a check engine light (which I cleared) on the 3rd drive. When I stopped one of the hoses had come undone as the new coupler is a little longer than the stock one. I dunno if my mechanic had forgot to hook it up or it came off. If it does it again I'll just trim the coupler so it fits better.
I was talking about your cat removal.
AstromanThread starterWenatchee, WA · May 28, 2010#19ah, lol.
ddongbaphay · May 28, 2010#20 Originally Posted by
Astroman ↑ ah, lol.
Don't worry. I believe you should take off both cats.
AstromanThread starterWenatchee, WA · May 29, 2010#21I might, no inspections where I live.
The hose came off again, resulting in poor idle and a CEL. Going to trim the coupler tomorrow.
suckerfaceMilwaukee, WI · May 29, 2010#22So, am I to understand, with the Corolla 1ZZ TB, you can just toss that on in place of the 1NZ TB with no further modifications? Or is it a good idea to have a better header on there first? I'm going to a salvage yard this week or next and would like to see if I can track one down if that's the case.
marcustoronto, canada · May 29, 2010#23im curious what happen next on astros tb..
PETERPOOPOahu · May 29, 2010#24 Originally Posted by
suckerface ↑ So, am I to understand, with the Corolla 1ZZ TB, you can just toss that on in place of the 1NZ TB with no further modifications? Or is it a good idea to have a better header on there first? I'm going to a salvage yard this week or next and would like to see if I can track one down if that's the case.
some people have problems with it, so they end up doing the chip swap from the 1nz to the 1zz TB. Even then (like my experience), some people still have problems. Could be a bad TB, since most are bought used from ebay.
AstromanThread starterWenatchee, WA · May 29, 2010#25From what I've read here, it seems to be the TB with the US part no., the japanese part seems to work better.
On a interesting note, my '05 corolla TB I purchased from Functionspec had a odd part number (#22030-0D030). There was a thread on here on how to do it but the OP deleted his posts.
DIY - 1.8L 1ZZ-FE TB Connector Chip Swap So far the only time the car runs like crap at low RPM and throws a CEL seems to be when one of the hoses that hooks up to my intake falls off because the new coupler is almost an inch longer than the stock one. I'm going to trim it down today which should get rid of the problem. If I can find my digital camera I'll take a movie of just how it sounds, as it changed a LOT. Sounds really really good now, and I'm still stock after the header.
I haven't done the chip swap or adjusted the idle, will give it some time as the TB was only installed yesterday.
TheSilkySmoothNew Hampshire · May 30, 2010#26I love to see a dyno sheet from a YW member that shows any improvement with a larger TB on this car with stock cams, inlet manifold and head. Laws of physics say NO improvement is to be had. And I mean back to back, same temps and fuel. Some days my car makes what feels like 10 more hp than other days - usually due to barometric pressure and temps, so you will alway have that variability in the mix. AGAin the power is ALL TO BE HAD in the cam phasing (vvti) with stock cams, ONCE YOU UNCORK THE EXHAUST AND HAVE A GOOD cai. yES i AM A DOUBTER.
PETERPOOPOahu · May 30, 2010#27supossedly Yoda? has a dyno that shows 3whp improvement, i think. however, that dyno was probably done on a different day with different weather conditions. so who really knows? hehe
edit: post #11 of this thread..
my run was not on the same day. i am going catless next week so i will put that dyno up. hoping for 120whp
scrap that. just took a ride in a honda fit with a straight pipe from the header back.. it smells and sounds really bad. just gonna put that money towards something else.
Bluevitz-rsOshawa, Ontario, Canada · May 30, 2010#30I've unplugged the VVT-i solenoid before just to see how the car went. It was night and day. WAY more consistent power and probably a few more up top.
(Unplugging the VVT-i solenoid retards the intake cam to 0° all the time)
PETERPOOPOahu · May 31, 2010#31 Originally Posted by
Yoda ↑ scrap that. just took a ride in a honda fit with a straight pipe from the header back.. it smells and sounds really bad. just gonna put that money towards something else.
lol. you don't like that smell? I LOVE that smell. You weren't even going to run a resonator?
Why don't you do what barber did?
ddongbaphay · May 31, 2010#32 Originally Posted by
TheSilkySmooth ↑ I love to see a dyno sheet from a YW member that shows any improvement with a larger TB on this car with stock cams, inlet manifold and head. Laws of physics say NO improvement is to be had. And I mean back to back, same temps and fuel. Some days my car makes what feels like 10 more hp than other days - usually due to barometric pressure and temps, so you will alway have that variability in the mix. AGAin the power is ALL TO BE HAD in the cam phasing (vvti) with stock cams, ONCE YOU UNCORK THE EXHAUST AND HAVE A GOOD cai. yES i AM A DOUBTER.
Dyno graphs don't show throttle response bro.
AstromanThread starterWenatchee, WA · May 31, 2010#33150 miles and the car purrs, no CEL. It's amazing what a difference this has made in how well the car pulls now when accelerating, I'm not having to push the pedal down as much to go uphill, and passing is much quicker. REALLY can't wait to get the custom exhaust done. I've done a TB swap before, this one really shines. Even my mechanic is impressed with how well the car responds and accelerates now. Do this mod, it's well worth it!
PETERPOOPOahu · May 31, 2010#34Yes, if you can get it to work.
sitoSingapore · Jun 1, 2010#35 Originally Posted by
Astroman ↑ 150 miles and the car purrs, no CEL. It's amazing what a difference this has made in how well the car pulls now when accelerating, I'm not having to push the pedal down as much to go uphill, and passing is much quicker. REALLY can't wait to get the custom exhaust done. I've done a TB swap before, this one really shines. Even my mechanic is impressed with how well the car responds and accelerates now. Do this mod, it's well worth it!
Astroman, did you swap the chip?
Originally Posted by
PETERPOOP ↑ lol. you don't like that smell? I LOVE that smell. You weren't even going to run a resonator?
Why don't you do what barber did?
nope was going to be straight thru. right now i have from the res back.
AstromanThread starterWenatchee, WA · Jun 1, 2010#37 Originally Posted by
sito ↑ Astroman, did you swap the chip?
No chip swap, but again this one did have a part number that I've only seen on this TB (#22030-0D030). Yesterday it felt like the ECU finally learned the new TB. Idle is just about normal, and even the warm up idle isn't as high as before, and it settles down quicker. Didn't even adjust the idle screw.
So maybe the secret is the part number? Either way my stock one isn't going back on in the foreseeable future.
sitoSingapore · Jun 1, 2010#38 Originally Posted by
Astroman ↑ No chip swap, but again this one did have a part number that I've only seen on this TB (#22030-0D030). Yesterday it felt like the ECU finally learned the new TB. Idle is just about normal, and even the warm up idle isn't as high as before, and it settles down quicker. Didn't even adjust the idle screw.
So maybe the secret is the part number? Either way my stock one isn't going back on in the foreseeable future.
Thanks Astroman...🙂
Any pictures of the throttle body on your engine bay? 😁
suckerfaceMilwaukee, WI · Jun 1, 2010#39Great feedback Astroman. I'm heading to a salvage yard this evening to see what new toys I can find :)
thebarberGrand Rapids, MI · Jun 1, 2010#40im not sure the throttle body actually nets whp or just better throttle repsonse. the throttle plate is about 25% bigger, so essentially when you're at half throttle its letting in the same air as the stock throttle body lets in at about 63% throttle.
the inlet to the intake manifold is pretty tight to the 1.75" stock throttle body.
i also have to say that im pretty happy with my resonator-back exhaust at the moment. id worry that without a supercharger or turbo, any bigger than 2" you'd lose a lot of bottom-end power (actually i feel like i lost some grunt with the addition of the dc header last month)
AstromanThread starterWenatchee, WA · Jun 1, 2010#41Stock TB is 2", 1ZZ TB is 2.5". NO loss of bottom end, more power is going to the wheels as the motor runs like a raped ape now.
Will deffinetly be getting a dyno done this summer when the custom header-back exhaust is done. 😁
I will take some pics today if I can, video too
darkmoon87Vancouver, BC · Jun 1, 2010#42 Originally Posted by
Astroman ↑ Stock TB is 2", 1ZZ TB is 2.5". NO loss of bottom end, more power is going to the wheels as the motor runs like a raped ape now.
Will deffinetly be getting a dyno done this summer when the custom header-back exhaust is done. 😁
I will take some pics today if I can, video too
nice. looking forward to see the video from u
thebarberGrand Rapids, MI · Jun 1, 2010#43stock yaris TB is 1.75" isnt it?
PETERPOOPOahu · Jun 1, 2010#44 Originally Posted by
Astroman ↑ Stock TB is 2", 1ZZ TB is 2.5". NO loss of bottom end, more power is going to the wheels as the motor runs like a raped ape now.
Will deffinetly be getting a dyno done this summer when the custom header-back exhaust is done. 😁
I will take some pics today if I can, video too
I wouldn't waste your money on a headerback exhaust if your only mods are 1zz TB/I/H/E etc. I'd say do it if you were boosted.
FunctionSpec626, Southern California · Jun 1, 2010#45Astroman,
Good to hear that everything is working out great 👍
advocatelocation · Jun 1, 2010#46 Originally Posted by
PETERPOOP ↑ i say wait for the MI turbo kit to come out...
This.
You're going to pay 800$ for 3 horsepower.
Bolt on mods are shit and the yaris ECU is shit.
Tuned FI or nothing.
sitoSingapore · Jun 2, 2010#47 Originally Posted by
Astroman ↑ Stock TB is 2", 1ZZ TB is 2.5". NO loss of bottom end, more power is going to the wheels as the motor runs like a raped ape now.
Will deffinetly be getting a dyno done this summer when the custom header-back exhaust is done. 😁
I will take some pics today if I can, video too
Hi Astroman,
Is the 1zzfe throttle body a direct fit to the stock intake manifold?
Any modifications to it?
Thanks.... 😁
AstromanThread starterWenatchee, WA · Jun 2, 2010#48My bolt-on mods so far have reduced my 1/4 mile time by 2 sec so they aren't shit. I'm not going turbo as I know the reliability of such a setup, and I simply cannot take the risk with my daily driver I still owe almost $8k on. (See my fine chrysler engineering thread posted a few years ago, my Lebaron would have ate garm's yaris for lunch at the 1/4 mile, but I enjoy driving the yaris more). These mods aren't worthless on N/A, they do help, and the TB has helped even more. There is something to gain with what I've planned, and eventually a supercharger will be on there so this won't all be for "nothing". I drive a lot, and with my suspension and engine modifications I've greatly increased the fun factor. To put it simply the TB mod worked great, and netting very real gains which weren't just noticed by myself. My car isn't done, more mods are comming. 🙂
AstromanThread starterWenatchee, WA · Jun 2, 2010#49 Originally Posted by
sito ↑ Hi Astroman,
Is the 1zzfe throttle body a direct fit to the stock intake manifold?
Any modifications to it?
Thanks.... 😁
It's a direct fit, I didn't need to modify anything. If the car runs like crap and throws a CEL then you'd need to swap the chip on the TB. I was lucky, it bolted on and worked.
sitoSingapore · Jun 2, 2010#50 Originally Posted by
Astroman ↑ It's a direct fit, I didn't need to modify anything. If the car runs like crap and throws a CEL then you'd need to swap the chip on the TB. I was lucky, it bolted on and worked.
Cool.... 😁
Thanks bro.....