Replies continued
talnlnkySpokane, Wa · Jun 23, 2010#101SQcomp had a big hassle with his headliner because of the side curtain airbags & sensors in the way. If you have an older modle (I think pre-2010, maybe pre-2009) you shouldn't have the curtain airbags unless you bought a special package or upgrade.
If you don't have the curtain bags, just go slowly, if you do have them, you may think hard about going to a stereo shop and having them install the CLD's for you... you'll pay a ton for labor charges i'm sure, but if they mess up they have to cover it.
HerbicidalThread starterRoseville, CA - USA. · Jun 24, 2010#102 Originally Posted by
derickveliz2 ↑ .
Yeah, lets give it a try...
The package is on it's way! The Post Office estimated 2-3 days for delivery.
HerbicidalThread starterRoseville, CA - USA. · Jun 28, 2010#103I finally mounted the grill cover to the subwoofer enclosure. Some people may not care for it, but it amuses me to no end! 😁
Picture not included in this copy
This is the final postion of the subwoofer in the trunk, still plenty of space. I never used the pass-through for anything, so blocking it with the sub is no biggie:
Picture not included in this copy
toy_torontoTarrana, Canada · Jun 28, 2010#104personally, i love that sub grill cover.
👍
HerbicidalThread starterRoseville, CA - USA. · Sep 17, 2010#105Update: after nearly 3 months since I completed this project, everything is still working flawlessly! No burned out fuses, nothing rattling, no nothing! 👍 The only thing is that I need to secure that sub box in the back! It keeps sliding around due to my...errr...exuberant cornering. 🙄 I picked up some heavy duty Velcro that I just need to take 5 minutes and apply. Then that should be that.
I do want to replace the stock HU at some point, so in the meantime, I think I will order that Toyota replacement HU bezel to allow an aftermarket HU to fit.
🤘
derickveliz2Central, MA · Sep 17, 2010#106Looking forward to see it.
hey how are the rear spring stiffeners doing?
D.
HerbicidalThread starterRoseville, CA - USA. · Sep 17, 2010#107I haven't checked since I put them in. I'll have to look this weekend. At the time, they raised the back end by 1/4". Honestly, I haven't really noticed a difference in the ride. 🤷 I think a 1/3" to a 1/2" thick, circular, flat spacer directly under the rear springs would lift the rear of the car up by that much without affecting the spring rate.
derickveliz2Central, MA · Sep 17, 2010#108I know what you mean, it's very relative to the TRD springs you have compare to the NF210s I have. But take them out, and then you will feel the difference.
HerbicidalThread starterRoseville, CA - USA. · Nov 18, 2010#109New head unit arrives
TODAY!!! Yaaaaay!!!! 👏 🤘
I'm so
done with my stock HU and my battery powered Blue Tooth unit for my cell phone 😠. After a bunch of research, I've decided on a
Kenwood Excelon KDC-X994 (
>>>link<<<).
Picture not included in this copy It has B.T and a rear USB port (which I want in the back, not in the front so I can throw a thumb drive on it and forget about it) and for the price, it has outstanding adjustability and control over the "sound stage". I wanted something more minimalist in appearance so as not to attract thieves.
Here's a quote from the product research team at Crutchfield, these are just some of the features that pulled me over to this unit:
Sound Excellence DSP: In order to optimize the sound quality, you can use the Sound Excellence DSP to set the type of vehicle and speaker sizes, locations, distances and x-over points. The DSP settings include the following:
Cabin Setting: Choose from Compact, Full Size Car, Station Wagon, Mini Van, SUV, Mini Van (Long), or Off
Speaker Setting: The speaker X'over is automatically set when the position and size of each speaker are select from the following items.
Front: Location (Door, On Dash, or Under Dash); Size: (6-1/2", 6-3/4", 7", 4"x6", 5"x7", 6"x8", 6"x9", 7"x10", OEM, 4", or 5"); Tweeter (None or Use)
Rear: Location (Door, Rear Deck, 2nd Row or 3rd Row; Size (6-1/2", 6-3/4", 7", 4"x6", 5"x7", 6"x8", 6"x9", 7"x10", OEM, 4", or 5")
Subwoofer: Size(10", 12", 15", None, 6-1/2" or 8")
Digital Time Alignment (DTA): Choose from 0.00 to 14.44 feet for the Front pair of speakers, Rear pair of speakers, and Subwoofer distances in reference to the distance between your listening positioning and the locations of the particular speakers.
X'Over: The Kenwood eXcelon headunit provides independent high-pass crossovers for the unit's front and rear speaker/preamp outputs, as well as a subwoofer low-pass crossover.
Front High Pass Filter: Frequency (30, 40, 50, 60, 70, 80,90, 100, 120, 150, 180, 220, or 250Hz); Slope (-12, -18, or -24 dB per octave); or you can also select full-range
Rear High Pass Filter: Frequency (30, 40, 50, 60, 70, 80, 90, 100, 120, 150, 180, 220, or 250Hz); Slope (-12, -18, or -24 dB per octave); you can also select full-range
Subwoofer Low Pass Filter: Frequency (30, 40, 50, 60, 70, 80, 90, 100, 120, 150, 180, 220, or 250 Hz); Slope (-12, -18, or -24 dB per octave); Phase (Normal/Reverse); or you can also select full-range
Equalizer Control: Equalizer Control allows you to use one of the System Q presets, or set your own custom settings using the 5-band Equalizer. The EQ adjustments are as follows:
Preset EQ: You can select from Natural, Rock, Pops, Easy, Top 40, Jazz, Game, iPod (you can select from 22 EQ curve types), or User.
5-Band EQ: The User mode allows you to adjust the following 5-Band EQ (62.5Hz, 250Hz, 1kHz, 4kHz, 16kHz) settings.
Band Levels: Independent front and rear EQ level of -9dB to +9dB.
Bass Effect: Enhances the bass response of Band 1 (62.5Hz).
Position Control: For a better sound-stage you can select your optimal listening position. You can choose from All, Front Left, Front Right or Front. You can also select to manually fine tune the sound stage by selecting the distance for each individual speaker in the vehicle compared to your listening position. You can select between 0.00 to 5.58 feet for the Left Front Speaker, Right Front Speaker, Left Rear Speaker, Right Rear Speaker, Left Subwoofer and/or Right Subwoofer.
Plus: 24 Bit D/A Converter: The Kenwood eXcelon KDC-X994 utilizes a 24-bit digital to analog converter for superior CD sound quality. Additionally, there is free sofware I can download from Kenwood for the USB device:
Music Editor Compatible: The Kenwood KDC-X994 supports the PC application, Kenwood Music Editor Lite (ver.l.0 or later). Kenwood Music Editor Lite is a desktop software that helps organize, manage and transfer AAC, MP3, and WMA music files to your USB devices from your PC. When you playback audio files that have been stored on your USB device using Kenwood Music Editor Lite (ver.l.0) through this unit, you can search a file by title, album, or artist name using the headunit's Music Search function. This guy should really help all my other components shine! After install, I'm going to have to reset everything on the amps and re-tune the whole system. I'm actually looking forward to it! 👍 And I thought it sounded good with the stock HU! 😁
derickveliz2Central, MA · Nov 18, 2010#110 Originally Posted by
Herbicidal ↑ New head unit arrives TODAY!!! Yaaaaay!!!! 👏 🤘
Speaker Setting: The speaker X'over is automatically set when the position and size of each speaker are select from the following items.
Front: Location (Door, On Dash, or Under Dash); Size: (6-1/2", 6-3/4", 7", 4"x6", 5"x7", 6"x8", 6"x9", 7"x10", OEM, 4", or 5"); Tweeter (None or Use)
Rear: Location (Door, Rear Deck, 2nd Row or 3rd Row; Size (6-1/2", 6-3/4", 7", 4"x6", 5"x7", 6"x8", 6"x9", 7"x10", OEM, 4", or 5")
Subwoofer: Size(10", 12", 15", None, 6-1/2" or 8")
X'Over: The Kenwood eXcelon headunit provides independent high-pass crossovers for the unit's front and rear speaker/preamp outputs, as well as a subwoofer low-pass crossover.
Front High Pass Filter: Frequency (30, 40, 50, 60, 70, 80,90, 100, 120, 150, 180, 220, or 250Hz); Slope (-12, -18, or -24 dB per octave); or you can also select full-range
Rear High Pass Filter: Frequency (30, 40, 50, 60, 70, 80, 90, 100, 120, 150, 180, 220, or 250Hz); Slope (-12, -18, or -24 dB per octave); you can also select full-range
Subwoofer Low Pass Filter: Frequency (30, 40, 50, 60, 70, 80, 90, 100, 120, 150, 180, 220, or 250 Hz); Slope (-12, -18, or -24 dB per octave); Phase (Normal/Reverse); or you can also select full-range
This guy should really help all my other components shine! After install,
I'm going to have to reset everything on the amps and re-tune the whole system.
I'm actually looking forward to it! 👍 And I thought it sounded good with the stock HU! 😁
Congratulations!
with x-over features you only need to match gain the amps. By pass every thing else. D.
_S7V7N_South Texas · Nov 18, 2010#111The 794 has basically the same options, i've spent about an hour of tuning and wow, these things have settings out the Ying Yang. Congrats on the buy !
HerbicidalThread starterRoseville, CA - USA. · Nov 18, 2010#112Thanks guys! I'm really psyched about getting it! I've got a busy weekend ahead, but I hope to at least get it hooked up. The 'tuning' will come later.
_S7V7N_ - good luck with your tuning! Sounds (no pun intended) like you are pleased with your unit. 🙂
HerbicidalThread starterRoseville, CA - USA. · Nov 18, 2010#113 Originally Posted by Truchito86 ↑
wow man, i've just read your thread from the very begining, and i've got to say that all of your work is very impressive. it also help me make the decision of going ahead and getting the sound deading job started on my yaris sedan. all i've done is replaced the stock speakers with alpine type-R's, but the door rattle has always annoyed me. can't wait to get started this weekend. great write up man!
Thanks! Glad you had some time to kill! 😁 In hindsight, I think I over did it on the RAAMmat. From what I know now, looks like a 25% coverage of the RAAMmat on the inside of the door panels would kill the resonance, then go to town with the Ensolite foam. Both products are VERY easy to use and do not require gloves. I LOVE the peel and stick, that's the easiest to work with. 👍 All the door pictures are right there, so you know what's behind the panels. No big surprises, just lots of holes. 😛
Good luck if you choose to do it. I had fun! But then again, I'm sick like that. 🙄
sqcompBack at home · Nov 18, 2010#114Now you guys know about some of the crossover and EQ capabilites Derick and I are faced with...
Add in a complete 1/3 Octave and another pre out...
HerbicidalThread starterRoseville, CA - USA. · Nov 19, 2010#115Yeah, I think I will stay at my level. Even with my relatively low-end components it will be the best system I've ever owned and I'm good with that. 🙂 Especially since I did all the work myself. 😎
sqcompBack at home · Nov 19, 2010#116I applaud the DIY work!
derickveliz2Central, MA · Nov 19, 2010#117There is nothing better than the feeling of doing it your self!
HerbicidalThread starterRoseville, CA - USA. · Nov 19, 2010#118 Originally Posted by
derickveliz2 ↑ There is nothing better than the feeling of doing it your self!
Originally Posted by
sqcomp ↑ I applaud the DIY work!
Yeah, I do too! You guys, however, took
THAT to the next level and beyond!!! Way to go! 👏 🤘
HerbicidalThread starterRoseville, CA - USA. · Nov 19, 2010#119Oh, I did get the new Toyota bezel that gives me the double DIN opening since I have the factory integrated radio. I did a quick test fit of what came from Crutchfield and it fits the Toyota bezel perfectly! Whew! Now it should be pretty much plug and play.
Oh yeah, this little jewel (which served it's purpose) will be coming out too!
Now I'll be able to take advantage of the RCA outputs on the new deck and go right to the Eclipse amps. My little system will be able to breathe!!!! 😆
Picture not included in this copy
HerbicidalThread starterRoseville, CA - USA. · Dec 2, 2010#120I've installed my Kenwood HU and it has TONS of adjustability. 😲 I've barely scratched the surface. My two amps (Eclipse EA4200 and the Eclipse XA1200600W) both have adjustability for the crossover's and bass boost as shown in the pictures below. Since my new HU has built in control over ALL these functions, should I "zero out" the amps and do ALL the tuning through the HU? Looking for suggestions. Thanks!
XA-1200:
Picture not included in this copy
EA-4200:
Picture not included in this copy
derickveliz2Central, MA · Dec 2, 2010#121.
In theory you would "by pass" the X-over and only adjust the Input Levels AKA Gains
In your amp I don't see an option to go "full" like in my amp.
But I'm sure the Masters will correct me if I'm wrong and give a proper answer
Picture not included in this copy
HerbicidalThread starterRoseville, CA - USA. · Dec 3, 2010#122Thanks Derick! Anyone else? Suggestions on how to set the amps specifically, since my new HU can control all the settings?
HerbicidalThread starterRoseville, CA - USA. · Dec 14, 2010#123I've decided to replace the vented subwoofer box with a sealed one. I checked the requirments for my 10" Alpine Type R subwoofer and this one fits the bill from Sonic as far as internal box volume. Hey, for the price of a tank of gas, I bought the box and paid the shipping. It's worth it to me to give it a try. Plus it has a smaller footprint than the vented box I have now. AND it has an angled back that I think will fit nicely up against the back of the rear seat. Here's what I ordered for $17.99 plus shipping:
<link to the specs of the sub box> Picture not included in this copy derickveliz2Central, MA · Dec 14, 2010#124Looks nice! Herb...
Please let us know how they compare to the ported box.
D.
derickveliz2Central, MA · Dec 14, 2010#125I was looking at
this one, but it's out of stock!
Picture not included in this copy cheap!
ShinareOklahoma City, OK · Dec 14, 2010#126I was going to ask why one would pick sealed over ported and googled it and answered my own question. :) Heres what I found:
Sealed Vs Ported Subwoofer Boxes
So you are ready to start building your car audio system? Where to start? Well a good place to begin is with the subwoofer enclosure. There are many types of enclosures for every vehicle and listening style and each has its advantages and dis-advantages. As just a general rule of thumb it is important to make sure your subwoofers will match the chosen enclosure so I recommend knowing what you are planning to run before starting. So for instance before deciding on a subwoofer box you will want to check what the recommended airspace specifications are for that model. Now we will discuss a few different options available for enclosures.
Sealed Subwoofer Boxes:
The most common and versatile type of enclosure is sealed. This style enclosure is ideal for any application where space is going to be an issue. In some cases a sealed recommendation for subwoofer box will be half of what the ported recommendation is. They also have the advantage over ported and band pass enclosures in terms of overall sound clarity. A sealed subwoofer box will deliver a tight, clean and accurate bass response and have a flat frequency response curve. In general a sealed box will be for listeners looking for sound quality driven system that is clean across the entire frequency band.
Vented & Ported Subwoofer Boxes
Next up are ported or vented enclosures, “ported” & “vented” are synonymous, it just means the enclosure has a hole in it to let air escape. You know that guy you can hear from 2 blocks away? Well he is likely running ported box. This style enclosure will likely be about twice the size of a similar sealed box since the airspace inside the chamber is much larger. Ported enclosures are tuned to a certain frequency range which is determined by the port length, width and diameter. The port can be in several configurations such as rounded or a slot which is narrower and taller. Each subwoofer will have a specific frequency they are designed to run at for maximum output. Depending on what you plan to use the enclosure for it can be tuned to various frequency ranges by modifying the port.
In general most competition SPL vehicles tune to high frequencies around 45Hz or higher. This setup would be designed for absolute maximum output but sacrificing a great deal of sound quality. A ported box tuned 25Hz will still allow your system to hit the ultra low bass notes while still keeping sealed like sound quality. The disadvantage is the enclosure will then have a fairly flat frequency range. And then the most common frequency range found usually in pre-built ported / vented enclosures is around 33 – 35Hz. At this frequency the enclosure will still deliver much more bass output than a sealed box but at the same type with still retain most of the sound quality. In other words you will get the best of both worlds with a ported box run at about 33Hz.
Bandpass Subwoofer Boxes
And last but not least are Bandpass enclosures. These are a hybrid box version and combine the features of a sealed and ported sub box into one enclosure. They are generally the hardest to build and design but offer some unique advantages. Bandpass enclosures are all about efficiency. How they work is a subwoofer or subwoofers in some cases are mounted inside a dual chambered box. One chamber is sealed and the other is ported / vented. The sound waves travel from the sealed subwoofer chamber though and out the port. This allows for a much deeper sounding bass and will be tuned to a narrow frequency band which creates a very aggressive sound. Not all subwoofers will work in bandpass enclosure so make sure you research or check the manual first.
derickveliz2Central, MA · Dec 14, 2010#127I got this from Image dynamics forum when I was asking for an advice between sealed or ported in my sedan:
1) when ever you place a sub in a box ( ported or sealed ) in the trunk of a car you will have to deal with the transfer function of the volume of air in that trunk.
Simply put larger the trunk thicker and heavy the lower octaves sound plus the notes feel lethargic.
2) A direct input to the cars interior is the best approach for best overall SQ but not necessarily what some people want in the bass tone ( to flat sounding to their ears )
D.
HerbicidalThread starterRoseville, CA - USA. · Dec 14, 2010#128 Originally Posted by
derickveliz2 ↑ Looks nice! Herb...
Please let us know how they compare to the ported box.
D.
Will do! Since Sonic and I are both in CA, I should have it later this week. I'll try to get a pic of it up against the back seats so you can see how it fits. This one may be a better choice than that square one you were looking at. 👍
Originally Posted by
Shinare ↑ I was going to ask why one would pick sealed over ported and googled it and answered my own question. :)
Good find. For the kind of music I listen to, I think the sealed box will sound better. We'll shall soon see...err....hear! 😁
derickveliz2Central, MA · Dec 14, 2010#129 Originally Posted by
Herbicidal ↑ I'll try to get a pic of it up against the back seats so you can see how it fits. This one may be a better choice than that square one you were looking at. 👍
From my statement above, about
transfer function of the trunk ID recommended me to face the woofer up towards the 6x9 openings, so to me it doesn't matter the shape, it's about placement. (I know you have new 6x9 speakers there)
Maybe I'm going crazy on this one, but I will try and let you guys know!
D.
_S7V7N_South Texas · Dec 14, 2010#130I have a pair of Kicker 12's and have them facing up towards the 6x9 openings, (6x9's removed ) maybe your outcomes will be different since your trunks are deadened but mine sounded okay at first, now i'm ready to face the box a diff direction. I think mine sounded best with the "ass" end of the box facing the rear seats and the subs towards the back of the trunk. I'm ready to also try a ported box, right now i have them in a 1.0 cubic foot per chamber sealed box. My Hifonics amp is fairly new so i haven't unleashed it on the subs yet, but i see some Type R 12's in my near future, with a ported box.
Oooo and i have a 4 day weekend comming up, so all i need is a saw, and i'm relocating my amps so i can play with the box placement.
derickveliz2Central, MA · Dec 14, 2010#131.
_S7V7N_ please let us know how it goes!
Enjoy your lonnnnnnnnG weekend.
D.
cm_ls1Oz · Dec 15, 2010#132 Originally Posted by
derickveliz2 ↑ I got this from Image dynamics forum when I was asking for an advice between sealed or ported in my sedan:
1) when ever you place a sub in a box ( ported or sealed ) in the trunk of a car you will have to deal with the transfer function of the volume of air in that trunk.
Simply put larger the trunk thicker and heavy the lower octaves sound plus the notes feel lethargic.
2) A direct input to the cars interior is the best approach for best overall SQ but not necessarily what some people want in the bass tone ( to flat sounding to their ears )
D.
I tend to disagree with 2) - i have tried various ways and in a sedan as close to the opening of the trunk face rear is the best in most situation, least cancellation of bass.
derickveliz2Central, MA · Dec 15, 2010#133 Originally Posted by
cm_ls1 ↑ I tend to disagree with 2) - i have tried various ways and in a sedan as close to the opening of the trunk face rear is the best in most situation, least cancellation of bass.
I'm with you, but this is the first time I have a sedan, and haven't really play with it, the Bazoka tube it's facing backwards (per instructions) and sounds good to me (sorry, feels good jeje)
Maybe they mean that if you have a ported box and the port opens to the cabin, like I've seen in some applications. 🤷 (I know and I remember this was SQcomp's plans long time ago)
To me, it's all about learning and trying new things!
We'll see how it works for Herb? maybe he would need to fold down one of his seats!
D.
cm_ls1Oz · Dec 15, 2010#134 Originally Posted by
derickveliz2 ↑
We'll see how it works for Herb? maybe he would need to fold down one of his seats!
D.
Bass passes through the seats whether they a folded down or not, thats not the problem, the issue here is if the wavelengths of the bass cancel each other out, of course i would suggest trying both and see what sounds best 👍
Imagine that the vertical line on the left is the back of yourbsedan, the red line is the bass coming out of the sub, the yellow is it reflecting, what you want is these lines to overlap or the sound will cancel each other out reducing bass.
So the last image is your ideal scenario
Picture not included in this copy Picture not included in this copy Picture not included in this copy Picture not included in this copy derickveliz2Central, MA · Dec 15, 2010#135 Originally Posted by
cm_ls1 ↑ I would suggest trying both and see what sounds best 👍
Your ideal scenario
Picture not included in this copy
Cool, I will try (once I get a box for the IDQ12, it's going to take me some time though)
Thanks
D.
HerbicidalThread starterRoseville, CA - USA. · Dec 15, 2010#136So is this illustrating that the '
opening' for the sub is facing the back of the rear seat? Or should the opening face towards the back of the car? 🤷 Apparently I'm directionally challenged. 😁 Thanks!
Originally Posted by
cm_ls1 ↑ Bass passes through the seats whether they a folded down or not, thats not the problem, the issue here is if the wavelengths of the bass cancel each other out, of course i would suggest trying both and see what sounds best 👍
Imagine that the vertical line on the left is the back of yourbsedan, the red line is the bass coming out of the sub, the yellow is it reflecting, what you want is these lines to overlap or the sound will cancel each other out reducing bass.
So the last image is your ideal scenario
Picture not included in this copy
derickveliz2Central, MA · Dec 15, 2010#137 Originally Posted by
Herbicidal ↑ So is this illustrating that the 'opening' for the sub is facing the back of the rear seat? Or should the opening face towards the back of the car? 🤷 Apparently I'm directionally challenged. 😁 Thanks!
Yeah it took me a couple of seconds too, I usually do sections going the other way, but the image shows the sub facing towards the back of the car.
D.
HerbicidalThread starterRoseville, CA - USA. · Dec 15, 2010#138 Originally Posted by
derickveliz2 ↑ Yeah it took me a couple of seconds too, I usually do sections going the other way, but the image shows the sub facing towards the back of the car.
D.
Thanks, I was planning on facing it that way. The angle of the sub box (I think) will fit up nicely against the angle of the backseat. Whoever sits there will get a back massage!
OH! And I just received an e-mail from Sonic saying
free shipping on all orders over
$20 between now and Friday the 17th (within the continental US)! 👍
HerbicidalThread starterRoseville, CA - USA. · Dec 17, 2010#139Received the new subwoofer box yesterday and WOW! It has a much smaller footprint than the ported box. Right now, the ported sub box is facing sideways, so based upon those previous graphs, I probably have it facing the worst possible direction. 🙄 Live and learn. I'll take a side-by-side comparision picture this weekend and post it. If I like it, I'll end up getting more of my truck space back AND lose some weight. I'll try to remember to weigh the boxes without the speaker and see what the difference is. Probably just a couple of pounds at most.
HerbicidalThread starterRoseville, CA - USA. · Dec 22, 2010#140This past weekend, I pulled the Alpine 10" Type-R sub from the larger, ported box and installed it in the smaller sealed box. I am able to re-position the smaller box so that it is facing the rear of the car and the back of the box is snugged up against the back of the rear seats. I had to elevate the box about 3 inches so that the back would fit against the rear seats as there is an angled piece of hard foam (kind of hidden by the trunk carpet) at the base of the back seats in the trunk. To keep it from sliding around, I picked up some ultra-heavy duty Velcro and used it to help secure the sub box from shifting around.
Then I spent some time re-tuning the amps and new HU. WOW!!! What a difference! I'm feeling more of a 'punch' with the new sealed box, plus now it is oriented the right way AND it takes up about 1/2 the space of the ported box. It's a win-win! The ported box was facing side-to-side, not the best way, but gave me more trunk space. I have pictures, just haven't pulled them off the camera yet. I'll try to do that in the next couple of days. Kind of crazy right now with the holiday's and all that.
derickveliz2Central, MA · Dec 22, 2010#141.
Way to go Herb!
Looking forward to see the pictures!
Feliz Navidad!
HerbicidalThread starterRoseville, CA - USA. · Dec 23, 2010#142Thanks Derick! Same to my friend! And to your family. 🙂
On a slightly different note (no pun intended) I noticed this morning on the drive in to work (still dark out) that my headlights were pulsing in time to the music. First time I've seen this happen! 😲 I didn't think the volume was THAT loud! I was at a stop light waiting for it to change when I saw the headlights pulsing. This one particular music track has a TON of deep bass and it was definitely working both the amp and the subwoofer. I backed the volume down a few clicks and that reduced the pulsing effect. Obviously I'm not going to notice this during the daytime. Are there any inexpensive mods that I can do to eliminate the pulsing of the headlights? 🤷 Besides turning down the volume? 😁
derickveliz2Central, MA · Dec 23, 2010#143BIG 3
Let me check and I'll see if I can get a set of cables ready to install and how much they cost, and if you want them I'll send them to you.
D.
HerbicidalThread starterRoseville, CA - USA. · Dec 23, 2010#144I thought I was good on the cables, good ground, direct attachment to the (+) side of the battery, cables no longer than they need to be, that kind of thing. So, for the cables are you saying an even BIGGER diameter? I know you've been dealing with the BIG 3, but until I 'retuned' my amps, etc I didn't really give it much thought. I need to research that some more.
Thanks for the offer and yes, please let me know the cost. 👍
_S7V7N_South Texas · Dec 23, 2010#145HerbicidalThread starterRoseville, CA - USA. · Dec 23, 2010#146 Originally Posted by
_S7V7N_ ↑
Yes.
I can't get to youtube here at work - blocked. 😠 I'll check it out from home. Thanks for the link.
swiddCentral Alabama, GOD BLESS AMERICA · Dec 23, 2010#147I've been running 600W on 4 year old stock battery, stock alternator and 4 gauge cable... with no dimming issues whatsoever, for about 8 months now.
sickpuppy1Kansas · Dec 23, 2010#148Running a cap is supposed to help that too.
_S7V7N_South Texas · Dec 23, 2010#149You're running 2 amps right ?
And 600 Watts Max ? So that'll be 300 per channel and if it's a really efficient amp you're looking at about 150 watts per channel, so 300 RMS. That's not to much of a strain on the factory battery and alt.
The cap will just work as a temporary fix, I'm running a Hifonics Brutus 1200 and a 1400 watt 4 channel with a cap, my headlights don't dim since i'm running HID's but my dash lights do dim a bit. I'm going to have to upgrade the stock battery and possibly stick a smaller one in the back close to my amp that is running my subs, to see how that works, after that i'll replace the alternator.
HerbicidalThread starterRoseville, CA - USA. · Dec 29, 2010#150 Originally Posted by
_S7V7N_ ↑ You're running 2 amps right ?
And 600 Watts Max ? So that'll be 300 per channel and if it's a really efficient amp you're looking at about 150 watts per channel, so 300 RMS. That's not to much of a strain on the factory battery and alt.
The cap will just work as a temporary fix, I'm running a Hifonics Brutus 1200 and a 1400 watt 4 channel with a cap, my headlights don't dim since i'm running HID's but my dash lights do dim a bit. I'm going to have to upgrade the stock battery and possibly stick a smaller one in the back close to my amp that is running my subs, to see how that works, after that i'll replace the alternator.
Yes, two amps. One is 500 watts, for the sub and the other is an RMS of 60x4. This is running the 6x9's and the 6 1/4's. Honestly, I probably won't do anything for now as I only notice the headlights dimming on that one song when it was pretty cranked on the volume. I still may look at a cap though. Thanks for that suggestion.