Yarisworld Archive

gude-head-1NZ-FE

214 posts · 82,350 views · page 1 of 5

GnomeBodyOriginal postUS-V.A. · Mar 31, 2010#1
Does any one know what the low down is on a gude-head-1NZ-FE

Will this buy me anything on a NA motor? or am I gunna have to combine it with fuel management or FI to really net any gains.

All and all, Im not really looking to build a race car, Im just trying to figure out what my options are to reshape my powerband to match my driving habits. For example, I never really go faster than 60 or 70 mph (no interstate driving) because all my driving is to work and back (Its all backroads or stop and go) Any other driveing normaly means Ive got the family in tow so I end up taking take the gen2 XB (hence why Im also considering getting rid of my backseat). To change the shape of my powerband I think my best bet would be custom cams, witch Im willing to do if it makes driving to work more fun, dont know what it would cost tho...


To be completely honest, Ive be entertaining the idea of sacrificing some pony's from the top in turn for some more torque at the bottom. maybe even combine it with a slightly smaller than stocktire diameter. I think I could be ok with my car topping out at 85 if it meant an equal trade in off the line acceleration lol.

Replies 213

cali yarisCanoga Park, CA · Mar 31, 2010#2
No one knows, at least on the Yaris. Order one and see, then we'll all know. 🙂

What does Gude say and/or guarantee about management?
06silveryarisPuerto Rico · Apr 1, 2010#3
I do not know how well the Gude head will increase power considering base power of the car. What I have read on local forums here is the prius pistons swap from what I have heard it a plug and play operation and swapping injectors for corolla or Tc's. I have yet to see one running on the street or track
GnomeBodyThread starterUS-V.A. · Apr 1, 2010#4
It just says up to +40hp but Im assuming thats max with other mods. The price is a bit much for me to justify without some sort of estimate on what to expect on a stock N/A setup. I could just spend the money towards a supercharger.

there description says...
"1. Intake ports are ported to create maximum velocity then rough cross hatched to provide better fuel atomization, which increases combustion efficiency providing increased power both at low and high rpm.
2. Exhaust ports are ported to relive internal pressure quickly, yet provide enough velocity to scavenge well, insuring a full fresh fuel and air charge will be delivered to the combustion chambers, not diluted down with left over spent gases from the last firing.
3. Head surface is milled them hand lapped to create a multi directional #32 micro Finish surface, this leaving hundreds of micro ridges to be crushed down by the steel gasket forming a super micro barrier for better gasket sealing.
4. Intake to head ports are purposely mismatched or stepped to fight unwanted reverberation and to reduce boundary layer effects improving port flow.
5. Valve seats we have tried 3 angles so called 5 angle, and many other valve and seat combinations, we have found that the factory angle on the valve is overall the best and that the blended radius parabolic valve seats pioneered by Gude performance provides the most horse power and longevity on most Imports.
6. Valve guides in most cases we have found that shorting the valve guide is helpful and will promote increased flow while still maintaining excellent valve control.
7. Valve springs all Gude performance camshafts are designed to operate to extreme rpm on stock valve springs, we spent countless hours designing and developing profile which will not require a high pressure valve spring which can cause added friction and valve stem failure due to the high loading of stiffer springs vale stem failure will usually cause major engine damage..
8. Camshafts Gude performance Bullfrog or Stinger cams are included with all Gude head packages, all cams are ground to precise tolerances, and are of the famous Gude profiles. Gude poured out all 30 plus years of experience, into designing cam profiles that are stable at extreme high rpm with stock or light valve spring loading, this increasing horse power and engine reliability, as high valve spring loads can case excessive wear and result in total valve stem failure destroying a expensive engine. "



Could all that net +40 on an N/A

my other question was... On the core deposits... is that ontop of the price? I really need to just email them.
GnomeBodyThread starterUS-V.A. · Apr 1, 2010#5
Oh yeah! Thanks garm! Im loving the suspension. Ive been meaning to post up some pics of the drop I got out of them but my ugly steely rims keep giving reason to postpone lol the dang things keep messing up my pictures.
cali yarisCanoga Park, CA · Apr 1, 2010#6
Valve springs all Gude performance camshafts are designed to operate to extreme rpm on stock valve springs,
what does extreme rpm mean? and how does that help if the 1NZ doesn't make power up there?

Someone just needs to bite the bullet, bolt it on, and report back.
H3LlIoNMidatlantic · Apr 1, 2010#7
Originally Posted by cali yaris ↑
Someone just needs to bite the bullet, bolt it on, and report back.

Working on that.
Bluevitz-rsOshawa, Ontario, Canada · Apr 2, 2010#8
I'm pretty sure the 1NZ won't make any more power after 6500 because of the flow design of the head and cam profile in a N/A tune.

If you're to look at a dyno graph of a 2ZZ it stops making power at about 6000 but then the high profile cam lobe kicks in and power starts to climb again.

It's also the probable cause of the engine starting to richen up just before redline on the 1NZ. Flow can't keep up to the demand of the pistons.

To the OP, that head, if it does what it claims, would shift the power band much higher. That's the only way to make more power N/A other than increasing the displacement.

And Prius pistons would increase the CR to 13:1. So unless you're running on aviation fuel and running a standalone EM, it's a little out of the question for a DD.
GnomeBodyThread starterUS-V.A. · Apr 2, 2010#9
^^^ thats what Im affraid of. It may be no point without alot of other mods to go with it. I think the Gude head comes with custom ground cams to match all the other work done to it, so it might indeed be tweaked to produce power at higher RPMs.

I was hopeing that a port and polish would increase flow and give a little more pep in its step, but after reading all the way threw "This Infamous Thread" Im starting to rethink my plan a little. The author of the thread says in one post...

"Extrude Hone and Flow
I had high hopes for the extrude hone process on my head but am somewhat disappointed in the results. EH suggests a 15-20% flow improvement and I was no where near that. Tom called me last night with the flow data. The good news is that the head did improve overall. The bad news is that the low lift intake numbers are down and the overall improvements are maybe in the 4-5% range and more on the exhaust side which is not as important as the intake side.
Picture

Why did the intake side get worse at low lift? The answer is most likely this...most intake ports are a cylinder or tube, but at the very end, just before the valve, the tube narrows. I think this is engineered into the port to achieve the venturi effect, just like with carburetors. The extrude hone process most likely minimizes this effect which hurt low flow on the intake side. The exhaust port does not have this shape and benefitted more. The ported intake did improve from .250 and up and this is a good thing, but the improvements are small. Our exhaust to intake ratio improved. I tend to think nearing 80% is optimal. Going with averages, the intake flow improved about 1% and the exhaust flow improved 9%. What is this worth on the dyno? I'd be surprised if it is worth 3hp and that is a disappointment for the hours of work and expense. I'll know for sure in the next 10 days.

Tom felt that the head could be improved a good deal with hand porting. If you can find a race shop that specializes in porting import cylinder heads, bigger gains would most likely be found."
GnomeBodyThread starterUS-V.A. · Apr 2, 2010#10
Now Im starting to think that maybe my game plan should be to either ....

A)bore the cylinders, leave the intake side alone for the most part and port the exhaust side.
-Or-
B) swap in prius pistons and convert the whole dang thing to CNG or Propane.

one way or the other, it looks like I need to pick up a second motor if I really want to do anything crazy. I was looking at one for like $400 but god only know how much shipping would cost. Might be cheaper to find a local junker and pull the motor myself.
H3LlIoNMidatlantic · Apr 2, 2010#11
I am getting ready to submit an order for the gude head. The only modification to my car so far performance wise is the AEM intake. I will run it on a dyno the way she sits, and then swap head and run it again, if you ask nicely. :)
YodaFL · Apr 2, 2010#12
...please
GnomeBodyThread starterUS-V.A. · Apr 2, 2010#13
Yes! Please!!!
CtrlAltDefeatIndianapolis IN · Apr 2, 2010#14
please x2 😁 I'm interested in the numbers...
redglare45Pomona / Pasadena, California · Apr 2, 2010#15
Yes, +1. Please let us know the #'s. Hoping you get a nice gain.
H3LlIoNMidatlantic · Apr 2, 2010#16
Wow...you guys are showing some serious love!

Head....ordered.
blacksandiegovitzJust chillin' out brah ! · Apr 2, 2010#17
Originally Posted by H3LlIoN ↑
Wow...you guys are showing some serious love!

Head....ordered.
^^seriously??? What are the details on what you bought 🤤
GnomeBodyThread starterUS-V.A. · Apr 2, 2010#18
What's the deal with the core charges? is that ontop of the price?
H3LlIoNMidatlantic · Apr 2, 2010#19
The guy's name is Bill, he seems cool. Waiting to hear back from him in terms of cam profiles and recommended FMS...It's $1650 for the head package, plus $350 if you don't have a head to send him. (He goes to the junkyard and pulls one to mill for you) So, if you have a head, it's just the $1650 plus shipping both ways. Complete milled head, custom cams, large bore custom throttle body. Waiting on more details...he calling me in the morning, will keep you posted. Mine is on the way.
H3LlIoNMidatlantic · Apr 2, 2010#20
Originally Posted by blacksandiegovitz ↑
^^seriously??? What are the details on what you bought 🤤
Dead serious. Be jealous. 😁
H3LlIoNMidatlantic · Apr 2, 2010#21
Originally Posted by Bluevitz-rs ↑
I'm pretty sure the 1NZ won't make any more power after 6500 because of the flow design of the head and cam profile in a N/A tune.
He regrinds the heads completely and then grinds custom cams. Also, his hp gains are going to require aftermarket tuning...the majority of his customers are race teams running custom electronics. I think I am his first 1nz street customer, looking in to camcon that Garm recommended, also going to talk to Bill about his recommendations...see what he was running to post a 30% gain
GnomeBodyThread starterUS-V.A. · Apr 2, 2010#22
🤘
06silveryarisPuerto Rico · Apr 2, 2010#23
Sounds good🎉, and regarding the prius pistons my buddy Oscar who has a euro repair shop has a new tech who happens to be a Toyota guy and he was telling me about clearance issues when putting the prius pistons in the Yaris block. He did mention that can be cured by using the head from a 2000 echo. He was also telling me about quite a few 2zz echo's driving around he mentioned he would post some vids on youtube.
GnomeBodyThread starterUS-V.A. · Apr 3, 2010#24
cured by using the head from a 2000 echo
interesting... I'll have to remember that.
ParmasML · Apr 3, 2010#25
The Gude Head package tempted me alot but I think for me as a hole package isn't worth the money.

I have 2 questions for H3Liton:

1. Could you ask Bill how much it costs to order ONLY the so called Bullfrog or Stinger cams and ship it to Europe. I am not intending to send him mine since shipping costs will be more worth to buy new cams.

2. Garm asked an important thing... they mentioned "all Gude performance camshafts are designed to operate to extreme rpm on stock valve springs". What is the extreme RPM number exactly?

Thanks in advance and good luck for your project man
H3LlIoNMidatlantic · Apr 3, 2010#26
Parmas -

Email sent, will let you know what he replies. I should be hearing from him later this morning.
hondakiller99Long Island , New York · Apr 3, 2010#27
i second the thought of just the cams, i would love to know what he wants just for those
PHXDEMONPhoenix, AZ · Apr 3, 2010#28
Originally Posted by H3LlIoN ↑
Wow...you guys are showing some serious love!

Head....ordered.
🙇
H3LlIoNMidatlantic · Apr 3, 2010#29
Just talked a little more to Bill...for those of you running dry NOS kits on your current set up, you would have to work out a wet kit in order to spray the Gude head. Apparently, the reason you can get away with a 50 dry shot is because of a padded fuel curve in the stock ECU that supplies enough to keep up with the spray. The Gude head/cams eat through that extra fuel, so any spray after Gude has to be wet. He was a bit more technical about it, but you get the idea. He emailing me now.

Also, if this works out, be sure to mention my name, as he offered me a kickback for anyone that I send his way. 😁 Of course, you'll have to PM me for my real name. 👍
cali yarisCanoga Park, CA · Apr 3, 2010#30
milled head, custom cams, large bore custom throttle body.
milled, meaning higher compression?

throttle body? to attach to the stock intake mani? 🤷

I'm sure glad you're doing this, so many questions to be resolved, good for everyone. 👏
H3LlIoNMidatlantic · Apr 3, 2010#31
He responded:

The cam kit is 750.00 exchange see attached, sorry the Scion has to have valve springs we could not get the level of performance we require on the stock springs as we usually do on most models, the head kit is 1650.00 exchange, and the throttle body is 295.00 exchange.
hondakiller99Long Island , New York · Apr 3, 2010#32
double damn!!!!! i love owing a scion..... just more road blocks for me to blow up!!!! lol well kep me posted on that haed kit cuz i have been looking at one for a whileee
ParmasML · Apr 3, 2010#33
Originally Posted by H3LlIoN ↑
He responded:

The cam kit is 750.00 exchange see attached,.
$750 including new cams? What about the exchange word? Does this price is only referred to work on cams only?

What have he sent you in attached?

What about the extreme rpm number question? Is there any proof of what he claims?

I'm sure he must understand we are in need of answers before commiting to buy
H3LlIoNMidatlantic · Apr 3, 2010#34
I organized your post sequentially for my benefit, answers below.

Originally Posted by Parmas ↑
1) $750 including new cams?
2) What about the exchange word?
3) Does this price is only referred to work on cams only?
4) What have he sent you in attached?
5) What about the extreme rpm number question?
6) Is there any proof of what he claims?
1) $750 plus shipping will get you a set of cams/springs for your car.

2) Exchange means you send him a set of factory cams to replace the ones he ground to make your new ones. You can either send him cams ahead of time, or wait for yours to come in, as long as you let him know ahead of time. Unsure of what the core charge on just cams is. It was $350 on the head/cams package.

3) $750 covers new cams, bearings and spring set.

4) The attached file was just the link for the head package that has already been posted in this thread, nothing new.

5) As far as the extreme RPM question, he can grind you a set of 1NZ cams that will turn 10,000 rpm.

6) As far as proof, we'll see what happens when the goods get here and I get the car dyno'd. You aren't gonna see a 30% gain on just a set of cams obviously. That gain is claimed on the whole head package, which includes custom cams, large bore ported TB and complete custom milled head.
ParmasML · Apr 3, 2010#35
Originally Posted by H3LlIoN ↑
I organized your post sequentially for my benefit, answers below.



1) $750 plus shipping will get you a set of cams/springs for your car.

2) Exchange means you send him a set of factory cams to replace the ones he ground to make your new ones. You can either send him cams ahead of time, or wait for yours to come in, as long as you let him know ahead of time. Unsure of what the core charge on just cams is. It was $350 on the head/cams package.

3) $750 covers new cams, bearings and spring set.

5) As far as the extreme RPM question, he can grind you a set of 1NZ cams that will turn 10,000 rpm.

6) As far as proof, we'll see what happens when the goods get here and I get the car dyno'd. You aren't gonna see a 30% gain on just a set of cams obviously. That gain is claimed on the whole head package, which includes custom cams, large bore ported TB and complete custom milled head.

I don't wish to send him my cams, I wish that he use new cams and work on them and ship them to me. If bearings and spring set are stock I don't need them. So that will be $350 or $750? How much for shipping to Malta, Europe?

Are you sure is 10,000 rpm? Do you really think a 1NZFE can withstand and make power at 10K rpm?

I am looking forward for your car to be dyno'd ! 🙇
H3LlIoNMidatlantic · Apr 4, 2010#36
Originally Posted by Parmas ↑
I don't wish to send him my cams, I wish that he use new cams and work on them and ship them to me. If bearings and spring set are stock I don't need them. So that will be $350 or $750? How much for shipping to Malta, Europe?

Are you sure is 10,000 rpm? Do you really think a 1NZFE can withstand and make power at 10K rpm?

I am looking forward for your car to be dyno'd ! 🙇

I'm starting to think language is our barrier. If you don't want to send him your cams, then he will go to junkyard and get a set, but you have to pay core charge for that. Will message him and see what that fee amounts to. Bearings and springs are not the stock ones. Springs are heavier duty. I have no idea how much shipping is to malta, I'll ask. He frequently ships internationally though, as he mentioned he has already sent about 30 cam sets to Thailand and Malaysia. As far as the 10k, yes, it MIGHT withstand it, but not for long. It obviously wouldn't be reliable. If you want 10k consistent, he can build you a motor for that. His price is right around $3500.
ParmasML · Apr 4, 2010#37
Originally Posted by H3LlIoN ↑
Bearings and springs are not the stock ones. Springs are heavier duty.... As far as the 10k, yes, it MIGHT withstand it, but not for long. It obviously wouldn't be reliable. If you want 10k consistent, he can build you a motor for that. His price is right around $3500.
Re: Springs, If he said they aren't stock so why on Gude Describtion say:

"7. Valve springs all Gude performance camshafts are designed to operate to extreme rpm on stock valve springs, we spent countless hours designing and developing profile which WILL NOT require a high pressure valve spring which can cause added friction and valve stem failure due to the high loading of stiffer springs vale stem failure will usually cause major engine damage.."

Re: 10Krpm ... I am thinking to build more my motor but I never thought of reving it near 10K neither
H3LlIoNMidatlantic · Apr 4, 2010#38
Originally Posted by Parmas ↑
Re: Springs, If he said they aren't stock so why on Gude Describtion say:

"7. Valve springs all Gude performance camshafts are designed to operate to extreme rpm on stock valve springs, we spent countless hours designing and developing profile which WILL NOT require a high pressure valve spring which can cause added friction and valve stem failure due to the high loading of stiffer springs vale stem failure will usually cause major engine damage.."

Re: 10Krpm ... I am thinking to build more my motor but I never thought of reving it near 10K neither
Re: Springs...it's a generic package description. Most of his applications he is able to make his cams work with stock springs. He said though that on the 1NZ, the reliability just wasn't there, so they have to be upgraded, but they come with the cam when you purchase it. I don't know what all the fuss is about, his price is right in line with the $700 you guys are talking about spending on those other cams in the performance forum. As of right now, I am planning on just throwing the whole package on there and dyno-ing...if the goods get here and it's relatively easy, I might pull cams out and put them in my factory head and dyno for you guys. Also depends on cost of dyno.

As far as your build, 10k is not unheard of. It's been a while but, if i remember right, the key is a short piston with a long rod/throw. I wouldn't try and boost a 10k motor though, that's more of a N/A endeavor.
hondakiller99Long Island , New York · Apr 4, 2010#39
Originally Posted by H3LlIoN ↑
I wouldn't try and boost a 10k motor though, that's more of a N/A endeavor.
a thing that has been crossing my mind so many times before..... any one ever made a high compression all motor 1nz?
ParmasML · Apr 4, 2010#40
I will be waiting for your dyno to see the progress... until then we sit tight
H3LlIoNMidatlantic · Apr 4, 2010#41
Originally Posted by hondakiller99 ↑
a thing that has been crossing my mind so many times before..... any one ever made a high compression all motor 1nz?
I have heard rumors of a prius piston swap, which of course bumps compression, but haven't seen any dyno sheets to correspond. After my head comes in, I'm gonna take the prius motor and see how far I can push it N/A, so I'll have more info to come.
H3LlIoNMidatlantic · Apr 4, 2010#42
Originally Posted by Parmas ↑
I will be waiting for your dyno to see the progress... until then we sit tight


anybody wanna sponsor the dyno time? 😁
hondakiller99Long Island , New York · Apr 4, 2010#43
Originally Posted by H3LlIoN ↑
I have heard rumors of a prius piston swap, which of course bumps compression, but haven't seen any dyno sheets to correspond. After my head comes in, I'm gonna take the prius motor and see how far I can push it N/A, so I'll have more info to come.
sweet!! def wanna know what the diff is cuz im toying around with a few ideas at the moment, you by chance havent heard how far these blocks can be bored have you?
H3LlIoNMidatlantic · Apr 4, 2010#44
Garm is 1.6, he could probably tell you off hand how far it can go but, if not, I will ask my block guy when I drop mine off.
Maitre_Te_TeQuébec · Apr 5, 2010#45
I have a second head in my shop for the inz. I'm very interested on this thread. This setup with a blitz supercharge, it will be very great!!!
cali yarisCanoga Park, CA · Apr 5, 2010#46
you by chance havent heard how far these blocks can be bored have you?
we bored and sleeved to just about 1.6L, as far as my motor builder was concerned, that's all she has to give.

I want to do a 1.8L and bore it to 2.0, that's a much thicker block than ours and will tolerate the mod better.
H3LlIoNMidatlantic · Apr 5, 2010#47
which 1.8 are you looking at?
H3LlIoNMidatlantic · Apr 6, 2010#48
Parmas -

Alright...Cams only core charge is $250. To be honest, that's a bit ridiculous to me but, if you decided you absolutely wanted to have a set of gude cams, I would carry my ass out to the junkyard and get a set of cores for you and ship them to him, provided you pay for shipping and part. Guarantee you it would be a hell of a lot cheaper than $250, but I reckon he is charging for his time to go get them too. Anyway, he estimates shipping to Malta in the $80 to $100 range, cams/springs he says weigh right around 14 pounds. If you have a postal code/zip (I have no idea how european addresses work) I will get you a more exact estimate.


Now...as a side note, I emailed him and asked:

"You have it mentioned that the yaris head package that I ordered can add up to 30% gain in horsepower. What can I do, besides the head package that you are sending me, to maximize this gain?"

And he responded:
"Headers and 2-1/2 exhaust will help"

Just food for thought...I'm still planning on doing dyno without exhaust for you guys. I might even slap stock intake back on there for you.
H3LlIoNMidatlantic · Apr 6, 2010#49
Oh and I just emailed this...

"Bill -

Another question from the forum guys...What kind of hp gain can be expected by just doing the Gude cams, without the tb and head?"

It'll be tomorrow before he answers, but I'll let you know what he says.
kounj · Apr 6, 2010#50
Originally Posted by H3LlIoN ↑
which 1.8 are you looking at?
probably the one from the scion xd.that swap should be easy.