Replies continued
H3LlIoNMidatlantic · May 12, 2010#101 Originally Posted by cdydjded ↑
There are two spectrums of N/A, people here will never be like the one you spent time around.
Haha I'm hoping to change all that with this thread.
H3LlIoNMidatlantic · May 20, 2010#102So...I got an email from Bill today asking me to confirm my shipping address so...hopefully that means this isn't much longer. In the meantime, here are the baselines, stock config all in one place:
98.93 hp
100.55 tq
16.64 1/4 mile E.T.
The SpectacleTampa, FL · May 20, 2010#103 Originally Posted by
H3LlIoN ↑ Yup yup. I got in touch with Bill last night...he is busy whitling away at my head and cams. He expects that they will be shipped back out and headed my way by the end of next week. In the meantime, I have been trying to track down the xB gas pedal assembly, linkage and tb whip but, as of yet, have been unsuccessful. I might just end up ordering these through my contact at toyota. I have also been in touch with my tuner, and he is expecting me in approx two weeks time to get the cams dyno'd all by themselves. I am also working on getting a spot in the toyota bay this coming weekend so that I can plug me car in to the TSI techstream with the hopes of determining what ECU adjustments are available via the actual toyo channels. At the moment, my car is limping around in stock form as car parts galour adorn my spare room.
And for anyone curious as to what this is involving, and why there is a "donate" link in my sig,
return car to stock (done)
dyno (done)
pull engine
install cams
reinstall engine
dyno
pull engine
install head/pulleys/tb/whatever else I want
Reinstall engine
dyno.
Again, you're welcome. Now donate! :-P
What gains are you expecting to make?
H3LlIoNMidatlantic · May 20, 2010#104Alright, just got off the phone with Bill...he was shooting to get mine headed out tomorrow, but he has a tc head on the flowbench atm, and has to finish it before he can put mine back on there to double check it, so he said should go out monday, tues by the latest, and should be in my hands by Fri.
Spectacle...Gude claims 10% gains with head package, IIRC. With supporting mods (full intake/exhaust/pulleys/camcon), I'm hoping to beat the blitz s/c gains which, according to
Turbo magazine's tests, hp went from 98 to 119.
Link to Turbo writeup. Camell...next post.
Black YarisToledo, OH · May 20, 2010#105Hmm.... wonder if that same 2az head will bolt to my 1az?
other thing I wonder is once a 2az head is fitted, would the tC supercharger mount up?
H3LlIoNMidatlantic · May 20, 2010#106Camell...yes. We plugged it in to the computer to see what could be done...it allowed for some basic adjustments of random stuff such as keyless entry and such...it also has tabs for engine stuff, but no access...My official stance after playing around is that the access MIGHT be there, but that it is not accessible at the dealership level. I talked with my tech buddy while I was there, and we agreed that access might be possible with the security "seed," but it is not available at dealership, he has to call toyota. Furthermore, he said that, if he does that, they let him go, and void all the work he's done on anything he may have worked on while employed there. (obviously not an option)
On another side note, there was a new feature available on the techstream that was a recent update...it's a datalogging feature that tracks all engine functions realtime. He had to go out of town, so we're waiting for him to get back before we borrow the computer for the night to log but, as of know, techstream is a no-go unless we can get that security key, which is pretty unlikely. We'll be using the logger both in stock config, and then with the camcon/cams/head/etc...
H3LlIoNMidatlantic · May 20, 2010#107 Originally Posted by
Black Yaris ↑ Hmm.... wonder if that same 2az head will bolt to my 1az?
other thing I wonder is once a 2az head is fitted, would the tC supercharger mount up?
tc supercharger is centrifugal....should be able to mount on your 1AZ without switching heads. Fitment will be the issue.
Black YarisToledo, OH · May 20, 2010#108Hmmm... I will have to check in to this... I am sure someone has tried to slap a tc supercharger on a 1az before
ParmasML · May 21, 2010#109 Originally Posted by
Black Yaris ↑ Hmm.... wonder if that same 2az head will bolt to my 1az?
Sorry I am confused now... does Gude's Head consist of a 1NZFE head or 2AZ-FE head?
On their describtion Gude mentioned 2 times the 2AZFE and I thought it was a writing mistake..... or not?
Can you please clear my mind H3liton?
H3LlIoNMidatlantic · May 22, 2010#110 Originally Posted by
Parmas ↑ Sorry I am confused now... does Gude's Head consist of a 1NZFE head or 2AZ-FE head?
On their describtion Gude mentioned 2 times the 2AZFE and I thought it was a writing mistake..... or not?
Can you please clear my mind H3liton?
The head that I ordered is the 1nz-fe head for our cars. (Echo/Prius/Yaris/Gen 1 xB)
He ALSO reworks 2AZ heads (tC), as well as heads for honda, vw, other toyo, etc etc...
Bluevitz-rsOshawa, Ontario, Canada · Jun 5, 2010#111any updates? did you get it yet?
H3LlIoNMidatlantic · Jun 7, 2010#112Sitting on my porch when I got home....47 day turn around. :-(
Picture not included in this copy
rob323Joyner, Brisbane · Jun 7, 2010#113Come on then, stop slacking off, whack it in, dyno that sucker! 😁
H3LlIoNMidatlantic · Jun 7, 2010#114Just texted toyo tech, he is slammed til friday, so I gonna drop it off then and let him do his thing whilst I rock my gas guzzler.
rob323Joyner, Brisbane · Jun 7, 2010#115Ok, in the mean time, get a stock head and the new head flow tested and have the cams measured 😁 Dispel all myths!
H3LlIoNMidatlantic · Jun 7, 2010#116Haha have a spare head to send me?
H3LlIoNMidatlantic · Jun 7, 2010#117In other words....I need head. :-D
rob323Joyner, Brisbane · Jun 7, 2010#118I got 2.
You flow yours and I'll flow mine. 😁
H3LlIoNMidatlantic · Jun 7, 2010#119Alright....let me make some phone calls tomorrow and see what it would run me.
H3LlIoNMidatlantic · Jun 7, 2010#120Hampton Roads, VA. I'm pretty sure Abacus Performance does it, just have to call and check. What's normal cost for that anyway?
H3LlIoNMidatlantic · Jun 9, 2010#121cdy...any word on flow shop/rough cost?
As to cams...two weeks before I can get her in to the shop. Sry for the bad news gents.
H3LlIoNMidatlantic · Jun 10, 2010#122bleh...$320 to $400 to flow head. I'm not paying for that. I'll just dyno it and be happy, or not.
cali yarisCanoga Park, CA · Jun 10, 2010#123^ supposed to be Gude's job anyway.
Bluevitz-rsOshawa, Ontario, Canada · Jun 10, 2010#124 Originally Posted by
cali yaris ↑ ^ supposed to be Gude's job anyway.
Ba-dum-che. 🤣
Jason@SportsCarDebary, FL · Jun 10, 2010#125 Originally Posted by
cali yaris ↑ ^ supposed to be Gude's job anyway.
We contacted them during our search for head/cam work, I was not impressed. They had no specs, or even basic information - what should be basic if someone was actually doing this work - they had to call me back with the answers. Confidence, zero. They appear to be a middle man for an unknown machine shop.
H3LlIoNMidatlantic · Jun 10, 2010#126Yeah I'm waiting to see numbers to make final judgment, but I'm overall less than pleased at the experience so far. Any time I ask any questions, I get the run around about corporate espionage and such...all the while I'm thinking "dude. you've got $1620 of my money, you better come up with something!" Any way, he seems pretty sure of his product, so I'll wait and see what the numbers come back with.
As of right now, tech guys are telling me there may be some clearance issues putting my cams in the factory head, we'll wait and see what happens though, I'll get some putty and check it out.
Any body have a link for the ARP head stud kit?
H3LlIoNMidatlantic · Jun 10, 2010#127Also not happy with the turnaround time, but again, the whole point was for someone to "be the guinea pig," so whatev.
rob323Joyner, Brisbane · Jun 10, 2010#128If the head has been measured, factory cams measured, stock head flowed to see what potential it had and how much work it needed, then every port worked on, then reflowed, ports reworked to equal them up, reflowed again to double check, then grind custom cam to suit, then preassemble to make sure cam doesn't foul on the head etc, I don't think a month is at all unreasonable (unless much shorter promises. were made and broken).
I was once told by a very experience engine head guy, that it takes him about 8 hours per port for 2 valve per cylinder motors and more for 4 valve per cylinder motors.
H3LlIoNMidatlantic · Jun 11, 2010#129Well if he had said "hey listen, it's gonna be a month and a half" I'd be cool with it, but he started telling me @ week three that I "should have it by the end of next week" which kinda' pissed me off.
Jason@SportsCarDebary, FL · Jun 11, 2010#130 Originally Posted by
H3LlIoN ↑ Yeah I'm waiting to see numbers to make final judgment, but I'm overall less than pleased at the experience so far. Any time I ask any questions, I get the run around about corporate espionage and such...all the while I'm thinking "dude. you've got $1620 of my money, you better come up with something!" Any way, he seems pretty sure of his product, so I'll wait and see what the numbers come back with.
As of right now, tech guys are telling me there may be some clearance issues putting my cams in the factory head, we'll wait and see what happens though, I'll get some putty and check it out.
Any body have a link for the ARP head stud kit?
You have to respect someone trying to protect their investment in the R&D process, and they are certainly within their right to do so. However, I have not talked to one reputably engine builder that would not share all of the data I asked for - this goes for both our current and past projects. Most of these guys are secure enough knowing people come to them because of reputation, and based on that alone they will share - telling someone flow numbers does not tell how you achieved them. 😉
I think the issue here is caused by the dealer. They likely fear that if anyone knew what machine shop made the parts they would be cut out of the loop.
Hopefully the difficult journey pays off for you.
H3LlIoNMidatlantic · Jun 11, 2010#131 Originally Posted by cdydjded ↑
ARP does not have head bolts or head studs for the 1NZ. Use brand new factory bolts & you will not have any issues.....
I know Garm & Aras are running head stud kits...who makes 'em? With as often as this engine will be coming apart, I'd rather not fork for new bolts every time I break it down...
cali yarisCanoga Park, CA · Jun 12, 2010#132 I know Garm & Aras are running head stud kits...who makes 'em?
We got ARP studs for a different car and re-threaded both the block and the head.
There is a thread on MI for aftermarket studs available from a company in Spain.
H3LlIoNMidatlantic · Jun 12, 2010#133ty Garm
GnomeBodyThread starterUS-V.A. · Aug 18, 2010#134Any luck?
D&DAustin, TX · Aug 20, 2010#135<-- subscribed :)
Bluevitz-rsOshawa, Ontario, Canada · Aug 20, 2010#136Updates?
Midnight DrifterMonroe, NJ · Aug 29, 2010#137 Originally Posted by
H3LlIoN ↑ Well if he had said "hey listen, it's gonna be a month and a half" I'd be cool with it, but he started telling me @ week three that I "should have it by the end of next week" which kinda' pissed me off.
So how's it rockin' now?
GnomeBodyThread starterUS-V.A. · Sep 1, 2010#138I hope that H3LlIoN's lack of updates is because he lost his laptop charger and not because he's been incarcerated for the murder of a certain merchant who didn't ship the parts in a reasonable time like he had promised...
xbgodFlorida · Sep 4, 2010#139Hey guys, this is Aras. I'm also in the process of getting a head from Bill. Here are my cam profiles.
420 grind lift
420 duration 238 on intake cam
Exaust cam 400 lift 238 duration
My head is also being O-ringed and i'm using a Cometic copper gasket.
My grind and my head are pretty extreme but I'm using full standalone so my Idle won't be a problem.
Bill has been doing racing heads for 20 years and is also a Aerospace Engineer. He is sometimes difficult to talk to mainly because he has hearing aids from racing for 40 years. Easy guy to talk to other than the hearing loss. His wife Faye runs the books and takes care of all the finances. It's a family run business so things are low key and not so industry standard. So you'll need to be paticent. your not dealing with a corporation this is a private racing company and lets face it, he's the only one doing this work for this head.
My package cost 2150.00 but mine is all out race and the O-ring head cost 400.00 extra. I'm also running a Edlebrock 70mm T/B and not his. As well as I'm running direct port nitrous with a sheet metal intake manifold.
I'll also keep you posted on my progress.
XBG
cali yarisCanoga Park, CA · Sep 4, 2010#140"in the process" means you've ordered it and paid a deposit?
This should be a very nice addition to your build.
xbgodFlorida · Sep 4, 2010#141Yes it's been paid. Just a wait and see game now. I will not have mine tuned untill sometime in Nov. I've changed alot of stuff on my car so lots of things going on right now. As well as getting my appointment at CFT and Rolo to tune it; he's always slammed with work so it's my first oportunity to tune.
Two other things on my head that I didn't mention. I'm using Ferrera valves and the cams are 114 on centers.
I've done so much motor upgades, it's gonna be interesting to see the out come.
All I know is that I hope this new turbo / head upgrade pays off.
XBG
sleey0PA · Sep 4, 2010#142Well, when your neck snaps in half going WOT, due to all your upgrades, that grin you crack will be sooo worth it:D
xbgodFlorida · Sep 5, 2010#143Here are some attachments of my engine bay as it stands right now. Pardon the mess but you get the idea. Got stuff coming and going in and out so nothing has been tightened up or wires hidden yet. This is just to give you guys an idea of what I'm doing
XBG
5 attachments not included in this copy
ParmasML · Sep 5, 2010#144Nice setup man you should done much custom work on this!
Why don't you begin a thread regarding your setup instead of posting into other's thread?
xbgodFlorida · Sep 5, 2010#145Suppose I could. didn't know how much posting I was going to do here but we do have one thing in common with these cars and thats the motor. I'll start a thread on this build and continue with updates on my head as they become available.
I think everyone is courious about how these heads will turn out.
XBG
sitoSingapore · Sep 6, 2010#146Nice setup, xbgod....👍
xbgodFlorida · Sep 6, 2010#147H3Llion, I see you got your head package. courious how every thing looked to you as you opened it and inspected it. Also did you choose to put the head all back together your self? or just didn't want Bill to do it?
I'm making him assemble mine so I know that all the tolorance's are correct between the cams and the buckets.
I would imagine he preassembled yours to check all that but let me how all your stuff turns out.
XBG
xbgodFlorida · Sep 22, 2010#148H3Llion,
Haven't heard from you about your head and cams. I hope your not the one that Bill said took it all apart and can't get it back together with the right specs. Courious to see how your's is doing
XBG
cali yarisCanoga Park, CA · Sep 22, 2010#149^ I have cams coming in now from overseas, after a year's R&D. I'll post up when they come in.
Three set ups will be available: street, N/A tuned and turbo.
xbgodFlorida · Sep 22, 2010#150Sounds good. But you try the first set. You will also need springs with those cams. You may try Eibach, I know gude buys them by the 1000 from them.
Or even Ferrea they make sets for these now.
I'm not a big fan of overseas manufacturing,,,,China....ect. So I hope you have a reliable source.
I've out sourced before and should have just kept it in house or bit the bullet and had Brian do it.
XBG