Yarisworld Archive

gude-head-1NZ-FE

214 posts · 82,350 views · page 2 of 5

Replies continued

ParmasML · Apr 6, 2010#51
Originally Posted by H3LlIoN ↑
Parmas -

Alright...Cams only core charge is $250. To be honest, that's a bit ridiculous to me but, if you decided you absolutely wanted to have a set of gude cams, I would carry my ass out to the junkyard and get a set of cores for you and ship them to him, provided you pay for shipping and part. Guarantee you it would be a hell of a lot cheaper than $250, but I reckon he is charging for his time to go get them too. Anyway, he estimates shipping to Malta in the $80 to $100 range, cams/springs he says weigh right around 14 pounds. If you have a postal code/zip (I have no idea how european addresses work) I will get you a more exact estimate.
Thanks for the update... so shipping charge is known now.

So if I send him cams the work total + springs + bearings would be $700 + $100 shipping right?

BTW postal code is ZTN04 (Area Code +356)
H3LlIoNMidatlantic · Apr 6, 2010#52
No, if you sent him cams, total would be $750 + shipping, which he ballparked around $100. Will send him postal code for actual shipping quote.
H3LlIoNMidatlantic · Apr 7, 2010#53
Originally Posted by H3LlIoN ↑
Oh and I just emailed this...

"Bill -

Another question from the forum guys...What kind of hp gain can be expected by just doing the Gude cams, without the tb and head?"

It'll be tomorrow before he answers, but I'll let you know what he says.
Bill emailed back and said to expect about a 15hp gain from cam kit alone.
rob323Joyner, Brisbane · Apr 7, 2010#54
Any idea where abouts in the rev range the cams are designed to produce power?
YodaFL · Apr 7, 2010#55
Originally Posted by H3LlIoN ↑
Bill emailed back and said to expect about a 15hp gain from cam kit alone.
is that whp or just crank?
H3LlIoNMidatlantic · Apr 7, 2010#56
no clue, will ask.
H3LlIoNMidatlantic · Apr 9, 2010#57
Originally Posted by Yoda ↑
is that whp or just crank?
and he responded "This reading was at the wheels, dyno’s from one to the other very rarely read the same."
rob323Joyner, Brisbane · Apr 9, 2010#58
Originally Posted by rob323 ↑
Any idea where abouts in the rev range the cams are designed to produce power?
This will be important to those that don't have the facility to change their rev limit.
d1nzfeasia · Apr 10, 2010#59
i guess the cams will be sleeping before 5500rpm, so rev cut removal is needed.
H3LlIoNMidatlantic · Apr 12, 2010#60
Alright, asked him for a graph showing just cams, and this is what he sent back...dyno'd at wheels.

Picture not included in this copy
cali yarisCanoga Park, CA · Apr 12, 2010#61
red is with the cams?

This is on an xB? with any other mods?
rob323Joyner, Brisbane · Apr 12, 2010#62
I assume red is the power and black is the torque. But the graph is pretty meaningless without a stock cam baseline to compare it against. Although at least it is still making power right up to 6000 rpm, so that's a good sign.
cali yarisCanoga Park, CA · Apr 12, 2010#63
looking more closely, it does say hp and torque on the red/black lines.

116 whp / 107 torque is what it says, I think?

does that O2 say 10.35?
H3LlIoNMidatlantic · Apr 12, 2010#64
You guys are killing me. I'm done until my stuff comes in...I'm tired of all the back and forth.
rob323Joyner, Brisbane · Apr 12, 2010#65
Yeah, I noticed that too. It's running pig rich, even if not naturally aspirated.😉
rob323Joyner, Brisbane · Apr 12, 2010#66
Originally Posted by H3LlIoN ↑
You guys are killing me. I'm done until my stuff comes in...I'm tired of all the back and forth.
Sorry about that H3LlIoN, but if someone wants to sell a product, you shouldn't have to milk them for all the relevant information.
Things like duration, lift, spring requirements, adjustable cam gear requirements, baseline and upgrade graphs, engine management mods, dialling in instructions etc should all be readily available and if offered up front, would save the milllion and one question being asked later.
GideonSunnyvale, CA · Apr 12, 2010#67
What's his email? Just have these guys email him and ask instead of being middleman. 🤷
YodaFL · Apr 12, 2010#68
^+
ParmasML · Apr 13, 2010#69
Originally Posted by rob323 ↑
Although at least it is still making power right up to 6000 rpm, so that's a good sign.
I want to see a dyno till 7500rpm! My setup is with stock head and since now I make power till 6300rpm for sure. My main interest on these cams is that it can make power within range of 7000rpm - 8000rpm if not they aren't worth the price.

Of course a stock cam baseline versus gude cam will be more reliable to compare
cali yarisCanoga Park, CA · Apr 13, 2010#70
You guys are killing me. I'm done until my stuff comes in...I'm tired of all the back and forth.
If you don't want the back and forth, don't post until you have the product in hand with some results, or be prepared for a lot of questions -- which is exactly what happened.

Mostly, I think people are excited that SOMEONE finally went for this, period.
H3LlIoNMidatlantic · Apr 13, 2010#71
I know, I know. I'm thinking I'm gonna swap factory airbox back in for the baseline run. If the heads come with cams already installed, then I'm gonna throw it on there and run it again. If not, I'll run the cams separately in my factory heads w/ factory airbox for you guys.
cali yarisCanoga Park, CA · Apr 13, 2010#72
🙇
H3LlIoNMidatlantic · Apr 21, 2010#73
Quick update...cores headed to cali priority. Should have this back next week.
H3LlIoNMidatlantic · Apr 22, 2010#74
Base line pulls scheduled for 930a Saturday, stock config.
kounj · Apr 22, 2010#75
Can't wait to see the outcome.🙌
GnomeBodyThread starterUS-V.A. · Apr 22, 2010#76
The anticipation is killing me!
H3LlIoNMidatlantic · Apr 22, 2010#77
Well....talked to Bill a lil' bit ago. He got my head, so should have stuff next week. Emailed him for turn around time. How come you no come to track? Aren't you in NN? I totally jacked your thread, btw.
H3LlIoNMidatlantic · Apr 24, 2010#78
Best pull today...98.93 hp, 100.55 ft. lb tq.
YodaFL · Apr 24, 2010#79
stock?
cruz-gsrAshland Mass · Apr 24, 2010#80
Originally Posted by H3LlIoN ↑
Best pull today...98.93 hp, 100.55 ft. lb tq.

what mods do you have in the car.
H3LlIoNMidatlantic · Apr 25, 2010#81
No performance mods. That's stock baseline, 87 octane gas.
Nexus1155Dorchester · Apr 25, 2010#82
I'll read through the thread in a minute to see what was done to the heads, but a car with headers and exhaust made 102hp and 96tq. Are you happy with those results?

I am in no way trying to put you down with the money spent already, but a tune would probably go a long way along with some other tweaks.
H3LlIoNMidatlantic · Apr 25, 2010#83
Reading is fun.
kngrsllSpartanburg, SC · Apr 25, 2010#84
Originally Posted by H3LlIoN ↑
Reading is fun.
lol
Nexus1155Dorchester · Apr 25, 2010#85
ah ok baseline of your stock car, your posts were like im going to change this and this then baseline so i thought you meant baseline of just a stock car with heads
H3LlIoNMidatlantic · Apr 25, 2010#86
Originally Posted by H3LlIoN ↑
No performance mods. That's stock baseline, 87 octane gas.
Originally Posted by Nexus1155 ↑
I'll read through the thread in a minute to see what was done to the heads, but a car with headers and exhaust made 102hp and 96tq. Are you happy with those results?

I am in no way trying to put you down with the money spent already, but a tune would probably go a long way along with some other tweaks.

🤷
GnomeBodyThread starterUS-V.A. · Apr 28, 2010#87
How come you no come to track? Aren't you in NN? I totally jacked your thread, btw.
I would have liked too, but Ive had to much stuff going on lately. Inbetween work and the family, spare time is rare. Its taken me 4 days split over three weekends to redo my stereo because every time I got started something would come up and take priority... (sigh)... as it is,on the last day I rushed to get it all finished because I havent had a radio since I started. Now I seem to be getting some ground loop noise witch Im going to have to dedicate another weekend into tracking down and eliminating

as for the thread Jacking, its all good man. Based off of what youve been posting, I'd say this thread should have been yours anyway🙌
frownonfunRGV, Texas · Apr 28, 2010#88
how did i just notice this thread? subscribed.
GnomeBodyThread starterUS-V.A. · May 6, 2010#89
Any progess to report H3LlIoN???
H3LlIoNMidatlantic · May 7, 2010#90
Yup yup. I got in touch with Bill last night...he is busy whitling away at my head and cams. He expects that they will be shipped back out and headed my way by the end of next week. In the meantime, I have been trying to track down the xB gas pedal assembly, linkage and tb whip but, as of yet, have been unsuccessful. I might just end up ordering these through my contact at toyota. I have also been in touch with my tuner, and he is expecting me in approx two weeks time to get the cams dyno'd all by themselves. I am also working on getting a spot in the toyota bay this coming weekend so that I can plug me car in to the TSI techstream with the hopes of determining what ECU adjustments are available via the actual toyo channels. At the moment, my car is limping around in stock form as car parts galour adorn my spare room.

And for anyone curious as to what this is involving, and why there is a "donate" link in my sig,

return car to stock (done)
dyno (done)
pull engine
install cams
reinstall engine
dyno
pull engine
install head/pulleys/tb/whatever else I want
Reinstall engine
dyno.

Again, you're welcome. Now donate! :-P
H3LlIoNMidatlantic · May 7, 2010#91
P.S. gnome...we'll be headed to the track again soon, possibly as early as this coming friday, if you are interested. I know it's short notice, will try and give you more of a heads up next time.
H3LlIoNMidatlantic · May 8, 2010#92
Don't know what to tell you. The toyottech I am talking to is a very close friend of mine, so he will tell me the truth instead of the normal legal answer. I asked him if he had tuning abilities, and he said that he honestly didn't know. He said that some toyotas give have adjust-ability and that he could do in shop, and others can't. Only way to find out is to plug in and try, so that's what they doing. Will know more after but, if this works, I highly doubt you are going to be able to walk in to any toyo dealer and ask for this without some kind of special relationship.
Nexus1155Dorchester · May 8, 2010#93
you forgot the other steps at the end.

ECU Tune
dyno again

check out www.car-part.com for junkyard listings of the parts you need. I am sure you'd find it there for fairly cheap
GnomeBodyThread starterUS-V.A. · May 12, 2010#95
I keep hopeing someone will develope something similar to this solution for the tC

Now granted, it would be about as expensive as a standalone, but I think it would keep it street-legal atleast.
H3LlIoNMidatlantic · May 12, 2010#96
I keep forgetting all of you guys are worried about "street legal." Not sure why, Gnome, they don't hook our ECUs up here in VA. Anyway, Dezod (half the design team on that ECU) is pretty active in the 1NZ xB community, so I wouldn't be surprised if something rolls out from them. I'll pm a couple people and see what I can find out. Regarding the techstream info, I've already posted my thoughts on the issue...I won't further speculate until I get in to the shop and have actual info to comment on.
GnomeBodyThread starterUS-V.A. · May 12, 2010#97
^^^lol your kidding me right?!?!

I've never actually bothered to watch them do my state inspection so I wasnt sure... well damn, If thats the case than maybe their's a standalone in my future after all.
H3LlIoNMidatlantic · May 12, 2010#98
Originally Posted by cdydjded ↑
CTScott has a Techstream. It is not programable, he has tried. Techstream is only meant to reflash the ECU via Toyota TSB's. The reflash cannot be customized. That being said I still want you H3LlIon to try what you can to find a solution. A week ago I found out about the Techstream Lite & spoke to Techstream in detail about this issue.

As for the Dezod in Line ECU, a week ago I spoke to both Paul from Dezod & Allan from APR about their unit. They have no intention to make a unit for the Yaris, it is not financially feasible for them. But Paul did say that if I do the leg work in getting some technical specs on the Yaris ECU, he might change his mind. Iv have been working on that for him.

The issue is going to be the cost which will be in the $1800-$2000 price range or more. Now I know thats alot of $$$$ & it is not for everyone. This is not going to be for the N/A guy. This is a unit that will be for turbo or S/C. It will be comparable to a AEM EMS. It would be 100% better than a AEM FIC or Emanage. It would be a plug and play unit.

I've been through his threads, I can't find anywhere where he has done a type up on his experimentation on the techstream, if he does have it. Why has he not mentioned? Also, unless he is with toyota, he most likely does not have access to TIS. Again, dude @ toyota said that some parameters are able to be changed, it depends on the vehicle. CTScott might have tried it, but I'm more of a "find out for myself" kind of guy. I got the techstream diagnostic cable already, hoping to get in this saturday and see what we're working with. As for Dezod, what kind of leg work is needed? PM me with specifics and I can see what I or my buddy @ Toyota can provide.

Oh and I love how you automatically assume that us N/A guys won't touch for that price. Also, from what I read, it is way easier to set up than EMS or comparable, since it uses all factory sensors.
H3LlIoNMidatlantic · May 12, 2010#99
Originally Posted by cdydjded ↑
So since there is no threads about CTScott & a Techstream that means the BS flag immediately comes out? I dont get it. I cant speak for him, but I was not going to mention my work with Dezod until I was more advance in the project. I feel now that it would have been a better decision on my part. Im glad you are a "find out for myself" guy, I am also. Please keep on reasearching the possibilities of the Techstream.

Im not assuming, Im basing it on historical fact from this forum. Most N/A guys here want $50 headers & $25 intakes.

You misunderstood me. I wasn't calling BS at all. (I believe we actually have a BS flag avatar for that) I was just remarking that I couldn't find any discussion/conclusions from him on the subject. You misunderstood my train of thought, or perhaps my delivery was ill worded. Apologies, if the latter is the case.

Regarding the work with Dezod, my offer still stands. If there is anything that we can provide, don't hesitate to ask; I'll be glad to help.

Also, $50 headers and $25 intakes are characteristic of bolt-on weekend drivers, not N/A guys. I'm basing that on 10 years spent in and around N/A teams, who spend two and three times what you would spend on FI to get [hopefully] the same power gains.
cali yarisCanoga Park, CA · May 12, 2010#100
bolt-on weekend drivers, not N/A guys
I am quite sure he meant those to be synonymous.