Yarisworld Archive

Need help with airbag light on....

7 posts · 8,589 views

bf1120Original post604 · Feb 12, 2010#1
my car's keyless entry didn't work, airbag light (both) on, passager's seatbelt light on (no one sitting there), immibilizer didn't work, whenever i start the car, the time always reset to 1:00, the lock/unlock button doesn't work without i start my car.....

anyone know how to solve and what happened?
need help please....ASAP......🙇

Replies 6

devinlamotheSudbury, Canada · Feb 12, 2010#2
If the passenger airbag light is on as well as the seatbelt light, you need your airbag system re-calibrated. This happened to me after a rear-end collision. This was covered for me by insurance so I have no idea how much it will cost.
CTScottUSA, CT · Feb 12, 2010#3
This post explains how to get the SRS ECU to flash its light to tell you what the stored codes are:

Looking at seats...


This one explains how to reset the stored codes:

Looking at seats...

Some of the stored codes require individual resetting, so if you have 3 stored codes, you may have to do the reset procedure 3 times.
bf1120Thread starter604 · Feb 12, 2010#4
find out what happened....the ECU-B fuse burned.....
CTScottUSA, CT · Feb 12, 2010#5
Originally Posted by bf1120 ↑
find out what happened....the ECU-B fuse burned.....
Ahh, that makes sense, especially with the clock always being reset...
bf1120Thread starter604 · Feb 12, 2010#6
but right now my fog light doesn't work.....it works when i didn't start the engine, but when i start my engine, the fog light it's gone....when i turned it off, the fog light on again...
CTScottUSA, CT · Feb 12, 2010#7
Check the ECU-IG fuse.