Yarisworld Archive

Help with Fog Lights!! (I HATE WIRES!)

44 posts · 15,858 views

kuyachris84Original postIllinois · Sep 18, 2009#1
I posted in the DIY forum but don't think it gets much attention so I'm gonna post here.

Didn't get instructions to install this... I attempted today and FAILED.

Click this thread....

micro image fog lights (NEED HELP!!!)

for the situation. It's mostly just wiring I'm confused with..

Replies 43

kuyachris84Thread starterIllinois · Sep 18, 2009#2
This is what I've done so far.

Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy

From Here I don't know what the rest of the wires do. If you look at the harness thingy I'm holding up. It's different colors. Mostly red, white, black. The tutorials on this site have green / blue wires so this is what confuses me.
There's also a red wire that i don't see in other tutorials.. it looks like it goes to the positive battery ... but I'm assuming we don't need it if I can get it installed the methods you guys use.

Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy

Can someone help me or explain to me what I do with these wires?!? 🤷
kuyachris84Thread starterIllinois · Sep 18, 2009#3
anyone?
LafiroNYC · Sep 18, 2009#4
What kit did you get? I will TRY and get my pictures tomorrow from my camera or cell phone, dont have anything today since I just installed windows 7. But that second relay should not be in the mix.
kuyachris84Thread starterIllinois · Sep 18, 2009#5
the one garm sent... I don't know the name. cuz I'm at work now.. ill check wen I get home
1NZYaris1New Zealand · Sep 19, 2009#6
if you emailed me i could have sent you the instructions .
the red wire with white plug plugs into the light harness
and then into the factory wiring inside the fuse box
under the bonnet .
👍
kuyachris84Thread starterIllinois · Sep 19, 2009#8
Originally Posted by 1NZYaris1 ↑
if you emailed me i could have sent you the instructions .
the red wire with white plug plugs into the light harness
and then into the factory wiring inside the fuse box
under the bonnet .
👍
can u take a picture of what u mean?

if its not too much too ask. .. pls ^^
1NZYaris1New Zealand · Sep 19, 2009#9
Originally Posted by kuyachris84 ↑
can u take a picture of what u mean?

if its not too much too ask. .. pls ^^
Take the Red wires with the white plug (as photo'd above )
jion it to the red wire comeing from the fog lights , then plug those 2 pinned wires
into the under bonnet fuse box . as per instructions below.

Here is the Microimage instructions

1 attachment not included in this copy

kuyachris84Thread starterIllinois · Sep 19, 2009#10
Okay, I finished the install and I think I have everything installed correctly... but the fog lights will not turn on. Tell me if u see anything wrong.

Picture not included in this copy

Connected red wires from fogs to the two red wires that goes into pin1 and pin2 slots in the bonnet.

Picture not included in this copy

Here's the two pins plugged into the fuse box.

Picture not included in this copy

Here is the red wire from the switch going into the yellow wire (pin3) in the D4 connector under the steering wheel.

Picture not included in this copy

Here is the yellow wire from the switch going into an 'orange wire' from the dimmer switch. The diagram of the dimmer plug looks different than from the instructions. I didn't know what color to tap into ... I think someone said orange on the forum before. Let me know if that's the right wire.

Picture not included in this copy

Here my Indicator on my dash says my fog lights are on when i press the switch but the fog lights don't turn on. =(

Help, please! 😕
LafiroNYC · Sep 19, 2009#11
I have the same problem. Remove the yellow wire and let it hang not touching anything.

Now turn on your fog lights, and they should work! Also make sure the ground is connected in the engine bay for the fog lights as well, don't forget that.

I also have Garms kit, it also came completely different then what the diagram asked for, with extra parts and cables. But at the end I got it working.

I am only stuck now wondering why it is that if I connect the yellow wire to the harness behind the light dimmer, that is doesnt allow anything to work.

Let me know what happens when you un-splice that wire to test what I said.
kuyachris84Thread starterIllinois · Sep 19, 2009#12
did u connect the red wires coming from the fog light... using both? or just one red wire?

just curious....

I'll try what u said.
kuyachris84Thread starterIllinois · Sep 19, 2009#13
Originally Posted by Lafiro ↑
I have the same problem. Remove the yellow wire and let it hang not touching anything.

Now turn on your fog lights, and they should work! Also make sure the ground is connected in the engine bay for the fog lights as well, don't forget that.

I also have Garms kit, it also came completely different then what the diagram asked for, with extra parts and cables. But at the end I got it working.

I am only stuck now wondering why it is that if I connect the yellow wire to the harness behind the light dimmer, that is doesnt allow anything to work.

Let me know what happens when you un-splice that wire to test what I said.
I unspliced the yellow and it still won't turn on.

Can you take pictures of your install? How does mine compare to yours?

I wanna see how you setup he wires in the engine bay. I reconnected the ground in the engine to the negative battery. Did you end up using the white and black wire? Should i splice the black wire into the other ground wire?
kuyachris84Thread starterIllinois · Sep 19, 2009#14
I wanna know what you did here... i have the black and white wires (which came off the removed relay)... taped off and the two red wires connected to the two wires that go into pin1 and pin2.

Am I suppose to ground that second black wire?

I already have that other black wire connected to ground via battery.

Did you use only one red wire?

Picture not included in this copy
cali yarisCanoga Park, CA · Sep 19, 2009#15
I think my post (telling you I would email you the latest instructions) was deleted?
kuyachris84Thread starterIllinois · Sep 19, 2009#16
the part that confuses me in the manual is that it says connect the positive wire to the white connector.

there are 2 red wires. One with a loop and one red wire that was from the removed relay. Which one is the positive wire coming from the foglights to connect to that white connector in the instructions?
1NZYaris1New Zealand · Sep 19, 2009#17
Okay the relay with the 4 wires attached you through away right .
the red wire from fogs goes to pin 1& 2
the white and black wire from fogs is EARTH . HAVE YOU EARTHED YOUR LIGHTS .

to me it looks like you wired in the large 4 pin relay disconnect it and throw it away , just like the instructions i sent you send to .
kuyachris84Thread starterIllinois · Sep 19, 2009#18
so ignore these wires?

Picture not included in this copy

and use the other red wire that has a loop connector at the end... the one that looks like it goes to the positive battery?

cut that and attach it to ray's wire kit?
1NZYaris1New Zealand · Sep 19, 2009#19
Yep unwire it throw it away , then take that white black wire from the fog lghts and earth it .
LafiroNYC · Sep 19, 2009#20
The first image shows the balast/two wires that come from the fog light kit. A white connector, and a black wire. The black wire gets grounded, since the cable is long enough, I grounded it right to the negative of the car battery.

Now, the same picture shows the red wire that splice sinto two, with an extra male end and copper fitting, and relay. The relay you already installed so I will skip that. The white end on the red wire is to be cut. And then with some bare wire, install the new copper fitting, and once thats installed, put it into the new male white connector. Now that new connector on the red cable can connect to the white end that comes from the fog light kit(the one being held by my hand).

And the other end of the red wire(the two already fitted wires), these get plugged into the fuse box. No other cutting or splicing required. I literally removed the plastic cover on the side, and slipped up the two red wires along with the cars other wires, and connected it into the two slots you ALREADY used.

Now, this is the confusing part. The big tangle mess of cables that also has a relay attached, I ended up throwing out most of it. Only the green connector which goes into the fog light switch is what you need, plus all the wire attached to it(trust me you need it all and some most likely) So I ended up cutting everything else off, including all other ends. I was left with the three wires and that plug, maybe 3 feet long. Once plugged into the fog light switch, the black I ASSUME is ground, the red gets plugged into the steering column harness as you already did, and the yellow I DON'T KNOW!!

I maybe connected this wrong, but as long as the red is connected to the harness on top, and the yellow is NOT used, the fogs will work when the switch is pressed, the problem is the switch does not light up when the car lights are on unless it is pressed to turn on the fog lights. Maybe this was the way it was suppose to be? But now when its pressed 12volts goes down the yellow wire thats hanging.

Good luck, but I so far have not received any other help myself as too why It does not light up when it should(hence why they said to connect the yellow wire to the dimmer switch, yet this causes the whole thing not to work)

4 attachments not included in this copy

LafiroNYC · Sep 19, 2009#21
If you really need, I will take a video and post it for you explaining it. While of course showing you the stuff around the car. PM me or post.

And please Garm or anyone please tell me why I cant get the fog light switch to light up when I turn on my lights, unless I turn the fog lights on themselves? And why it is that when I connect that wire to where it is "suppose" to go, it kills the whole thing.
1NZYaris1New Zealand · Sep 19, 2009#22
Originally Posted by Lafiro ↑
If you really need, I will take a video and post it for you explaining it. While of course showing you the stuff around the car. PM me or post.

And please Garm or anyone please tell me why I cant get the fog light switch to light up when I turn on my lights, unless I turn the fog lights on themselves? And why it is that when I connect that wire to where it is "suppose" to go, it kills the whole thing.
Theres is only one LED in the switch and it gets power when fogs are on 👍
LafiroNYC · Sep 19, 2009#23
So then what is the point of connecting the second wire to the harnes that controls dash light dimming????

EDIT:::

I just remembered, if I unplugged the wire at the steering column harness, and just plug the other one into the dimmer switch, when I turn on my lights, the fog light switch lights up at the same time! Fogs stay off. But of course, if I try to turn on the fogs, nothing happens. And like I said before if both are plugged in, they do nothing! Like its being shorted and the relay breaks the connection or something.
kuyachris84Thread starterIllinois · Sep 19, 2009#24
Originally Posted by Lafiro ↑
Now, the same picture shows the red wire that splice sinto two, with an extra male end and copper fitting, and relay. The relay you already installed so I will skip that. The white end on the red wire is to be cut. And then with some bare wire, install the new copper fitting, and once thats installed, put it into the new male white connector.
This is the part i don't get. I've tired hooking up every wire but nothing works... WHICH wire did you hook up? it is a wire cut from the relay that's not needed or is it the long long red wire with a loop by itself.... or is it the white wire cut from the relay?

Did you ground your white and black wire cut from the relay that's not needed?

I tried grounding both the white and black.... nothing.

I give up. *Jumps off a cliff*

If you can make a video wen you have time to explain it.. that'd be great.
1NZYaris1New Zealand · Sep 19, 2009#25
okay the fourth photo from the bottom (^above ) shows the fog light harness coming from the lights
join that to the 2 wires in the fuse box under bonnet , make sure the fog lights are earthed , that is all that is reqired under the bonnet .
Throw every thing else away .

Lights should work , if your dash symbol is lighting up
if they are not check your fuses number 12 under dash
and check that you have power at pin 1 & 2 under bonnet
No power there means fuse blown , power there but still no lights means
your connections made under bonnet are not connect ( joined properly )
👍

Ps don't jump you will live to reget it 👍

1 attachment not included in this copy

kuyachris84Thread starterIllinois · Sep 19, 2009#26
Originally Posted by 1NZYaris1 ↑
okay the fourth photo from the bottom (^above ) shows the fog light harness coming from the lights
join that to the 2 wires in the fuse box under bonnet , make sure the fog lights are earthed , that is all that is reqired under the bonnet .
Throw every thing else away .

Lights should work , if your dash symbol is lighting up
if they are not check your fuses number 12 under dash
and check that you have power at pin 1 & 2 under bonnet
No power there means fuse blown , power there but still no lights means
your connections made under bonnet are not connect ( joined properly )
👍

Ps don't jump you will live to reget it 👍

So if the indicator isn't working fuse 12 is blown.

If pin 1 and pin2 has no power... where would the fuse for that be?
1NZYaris1New Zealand · Sep 19, 2009#27
under the relay and wire panel, inside the car just above drivers feet 👍
LafiroNYC · Sep 19, 2009#28
My horn isn't working. I will be forced to remove my front bumper tomorrow morning early.

If you can wait until then, I will gladly take a video of everything from start to finish.

Video's are so much easier to work with because you see everything. I will then explain everything in it. Quality may suck just a bit. Its just the video will be from my iPhone 3GS.
kuyachris84Thread starterIllinois · Sep 19, 2009#29
Thanks Lafiro....

Anyways... here's a video of what I'm having problems with.

http://www.vimeo.com/6662063

Video should be ready soon... i just uploaded it.

I feel so stupid not being able to figure this out. 😢
1NZYaris1New Zealand · Sep 20, 2009#30
Quick test the RED wire that goes to the fog lights put it to the POSITIVE terminal of the Battery
Fog lights should come on . NO wrong wire or bulbs are blown .

Just watched your Video the RED wire from the Fog Lights (does it go to the fog lights)
Goes too the Pin 1 & 2 wires in the under bonnet relay box

You should only have the one wire that goes to the fog lights which
connects to pin 1 and 2
and the fog light earth wire to deal with under the bonnet .

The 3 wires you have togeather should be running to the switch
if you are useing the switch supplied which you appear to be
and the switch wireing is all done inside the car by removeing the cover around the steering colum .READ INSTRUCTIONS IN PDF .
Attached again .

the rest is rubbish ,

1 attachment not included in this copy

LafiroNYC · Sep 20, 2009#31
I just saw the video.. I really wish you asked for help first, or found my thread from before that included my install. You went too far and cut the wrong ends off for one, and the make matters worse, where are the two to one red wire? Which should have connected to the two pin slots in the relay box? Why is there only 1 red wire there in your video!!!!!!!! oh no0o0o0o0o0o

I will try what I can tomorrow, and from there you can cut/splice what you need to make it work!!!!!!!!!
LafiroNYC · Sep 20, 2009#32
Oh sorry, not to hi-jack the thread, but in the same relay box, does anyone know other then the fuse on top for the horn, which cable is it?(pin that is) Cause I have to figure out if the relay for the horn is bad, or the horn itself. Since the fuse is good.

Thanks.
kuyachris84Thread starterIllinois · Sep 20, 2009#33
Originally Posted by 1NZYaris1 ↑
Quick test the RED wire that goes to the fog lights put it to the POSITIVE terminal of the Battery
Fog lights should come on . NO wrong wire or bulbs are blown .

Just watched your Video the RED wire from the Fog Lights (does it go to the fog lights)
Goes too the Pin 1 & 2 wires in the under bonnet relay box

You should only have the one wire that goes to the fog lights which
connects to pin 1 and 2
and the fog light earth wire to deal with under the bonnet .

The 3 wires you have togeather should be running to the switch
if you are useing the switch supplied which you appear to be
and the switch wireing is all done inside the car by removeing the cover around the steering colum .READ INSTRUCTIONS IN PDF .
Attached again .

the rest is rubbish ,
is it possible to take a picture of what you mean? It doesn't say anything about the 3 wires in the instructions. the switch has it's own 3 wires which you hook up to ground and the d4 connector. Hmmmm...




Originally Posted by Lafiro ↑
I just saw the video.. I really wish you asked for help first, or found my thread from before that included my install. You went too far and cut the wrong ends off for one, and the make matters worse, where are the two to one red wire? Which should have connected to the two pin slots in the relay box? Why is there only 1 red wire there in your video!!!!!!!! oh no0o0o0o0o0o

I will try what I can tomorrow, and from there you can cut/splice what you need to make it work!!!!!!!!!
It doesn't show well in the video but the red wire that connects to pin 1 and pin 2 in the fuse box is connected... i just cut off the white piece cuz i thought it needed to be spliced off.
LafiroNYC · Sep 20, 2009#34
Im going outside now to try and figure out my horn problem. If the problem is the relay, then I will not be taking apart my bumper. But if the relay is sending power, then I will be forced to remove the bumper to directly test the horn/most likely buy a new one, at which time I will also take a video of the entire install.

be back later!
kuyachris84Thread starterIllinois · Sep 20, 2009#35
I got it working... FINALLY!!!!


I reattached the old relay. Those 3 wires had to go somewhere....

So pretty much attach the long red single wire to ray's oem kit. (2 wires that go into pin 1 and pin 2 in the engine bay fuse box) With the old relay i attached the red wire coming out of it to the battery. It has a fuse along with it. Installed the other relay inside the car where the fuses are at. Install the inside switch via ground and red wire to the yellow d4 wire at pin #3.

Note: I didn't install the yellow wire (coming out of the switch inside the car) as it also didn't allow my fogs to turn on when they were spliced into both the yellow d4 wire or the dimmer wire. So I left the yellow wire from the switch inside the car hanging and taped off.

Now when I press the switch inside the car... the fog lights turn on! and off when I press it again. Now I just gotta mount it... but i'll take pics later tonight! 👍

Only problem is the switch for the fog lights stays on... but I doubt that'll drain my battery.

Those instructions you gave me were good but it doesn't say anything about what to do with the wires once you remove the relay (the relay coming from the wires... not the relay you put inside)... nor does it say to do anything with it. To a complete noob like me ... it will confuse people. It doesn't say to tape it off or connect it anywhere. I'm just relieved I got it to work. Anyone have questions ... please feel free to ask.
LafiroNYC · Sep 20, 2009#36
Well congrats.....

I foudnout my horn works. But absolutely NO wire in the harness received power when I press the horn. Yet if I run positive power to the horn it sounds loud and clear....

So something is wrong with the wires between my steering wheel, and the fuse box harness in the engine bar :( (maybe even the relay)

But atleast now I know that warranty will cover that and I don't have to worry about it.

As for your fogs, look at my attachment. Its VERY simple. Engine bay the fogs will have two wires, a red one, and a black, the black I show goes to battery ground. The red goes into the modified red cable that splits into two, and that new red cable as you see goes into those two pin slots in the fuse box of the engine bay.

Inside the car is a different story. As you were told, the relay that came seperate is installed by the brakes. Where all the other relays and fuses are by your feet in the car.

From the entire mess of cables you have, one end which connects to the fog light switch, one end that ahs a relay, and all the other ends that only have 1 wire going to them, go ahead and cut off EVERYTHING except for the end that connects to the fog light switch(and all the cable/slack that can be left with it).

The end goes into the fog light switch, and the red cable goes under the steering column harness.

The black goes to ground.

And your done. Yellow wire goes nowhere, but somehow it receives power when the fog light switch is pressed to be cause not to ground that out. Garm, nor anyone else can explain to me why this happens. Nor why the switch cant light up when the other lights are on, why it only lights up when its pressed, which sucks kindof. Cause I have a cable hanging doing nothing.

1 attachment not included in this copy

kuyachris84Thread starterIllinois · Sep 20, 2009#37
PICS!!!!!!!

Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy

They're aimed a lil high, but it's raining so I can't adjust them. I'll lower them just a tad bit when it's dry.
LafiroNYC · Sep 20, 2009#38
sample: thread 51
Bi-xenon headlights, and xenon(meaning HID) Fogs!!

1 attachment not included in this copy

kuyachris84Thread starterIllinois · Sep 20, 2009#39
sick ass sedan lafiro!
1NZYaris1New Zealand · Sep 20, 2009#40
Originally Posted by kuyachris84 ↑
I got it working... FINALLY!!!!


I reattached the old relay. Those 3 wires had to go somewhere....

So pretty much attach the long red single wire to ray's oem kit. (2 wires that go into pin 1 and pin 2 in the engine bay fuse box) With the old relay i attached the red wire coming out of it to the battery. It has a fuse along with it. Installed the other relay inside the car where the fuses are at. Install the inside switch via ground and red wire to the yellow d4 wire at pin #3.

Note: I didn't install the yellow wire (coming out of the switch inside the car) as it also didn't allow my fogs to turn on when they were spliced into both the yellow d4 wire or the dimmer wire. So I left the yellow wire from the switch inside the car hanging and taped off.

Now when I press the switch inside the car... the fog lights turn on! and off when I press it again. Now I just gotta mount it... but i'll take pics later tonight! 👍

Only problem is the switch for the fog lights stays on... but I doubt that'll drain my battery.

Those instructions you gave me were good but it doesn't say anything about what to do with the wires once you remove the relay (the relay coming from the wires... not the relay you put inside)... nor does it say to do anything with it. To a complete noob like me ... it will confuse people. It doesn't say to tape it off or connect it anywhere. I'm just relieved I got it to work. Anyone have questions ... please feel free to ask.
The relay you hooked up to the battery is not meant to be used , nor are the wires that where attached to it , you are now running your lights off
2 realys .
joshpjostAmherst, MA · Jan 1, 2010#41
Just installed my fog lights I bought on ebay. Had to re-wire them for my pre-wired yaris. I have one wire from both fogs going into the fuse bonnet, while the other grounded to the battery. Inside, I have a relay I borrow from the fuse box, (headlamp relay). One wire from the switch is tapped into the wire from pin 3 of the D4 Connector while the other wire from the switch is tapped into pin 4 of the D4 connector. Third, and last, wire from the switch is grounded. Fog lights work when they are supposed to, (when parking lights are on, fogs work when switch is depressed and light appears on dash).

My problem is that the switch is always illuminated and when depressed to turn on fogs, the switch LED turns off. I know that it probably won't drain my battery, but I dont understand why its backwards. Can the LED be removed from the switch?

I switched the wires that were tapped into the D4 connector but no joy, same problem.
CTScottUSA, CT · Jan 1, 2010#42
So far, there are three different wire color combinations that I've seen on the aftermarket fog light switches. Thus far all of the switches that I've seen have 5 pin connectors:

#1 - Black, Red, blank, Yellow, Red
#2 - Red, Black, blank, Red, Black
#3 - Black, Yellow, Red, Yellow

The one I received with my kit is #2 above. Here's a picture of the rear side of the PCB with the connector attached (which shows wire order listed above):

Picture not included in this copy

Following that ordering of pins and with my switch being #2 and the middle one listed for each pin below, here is the switch wiring that will make the two indicator lights on the switch function correctly (i.e. turn off with the ignition, etc.).


Pin 1 - (black, red, or black) - Green Wire of A/T Illumination (Conn D20 - Pin 2) = +12V
Pin 2 - (red, black, or yellow) - Orange Wire of Headlight Switch Connector (Conn D4 - Pin 4) = Ground
Pin 3 - No wire, No Connection
Pin 4 - (yellow, red or red) - Yellow Wire of Headlight Switch Connector (Conn D4 - Pin 3) = +12V through coil of fog relay
Pin 5 - (red, black, yellow) - Tied to Pin 2 above, within harness

1 attachment not included in this copy

joshpjostAmherst, MA · Jan 2, 2010#43
Thanks for the detailed response. To clarify: My switch is of configuration 1. The black wire is ground, because it has a eyelet, so I grounded it near the specified bolt near the clutch. According to your instructions, this black wire, (pin 1) should go to Conn D20 -Pin 2? For manual transmissions, is this Conn just laying near the stick below the console?

Also, according to your instructions, it appears that I have the same configuration minus the ground. I have the red wire tapped into pin 4 of Conn D4 and the yellow wire tapped into Pin 3 - Conn D4. Would you agree that the misplacement of the black wire would cause my problem?
CTScottUSA, CT · Jan 2, 2010#44
Originally Posted by joshpjost ↑
Thanks for the detailed response. To clarify: My switch is of configuration 1. The black wire is ground, because it has a eyelet, so I grounded it near the specified bolt near the clutch. According to your instructions, this black wire, (pin 1) should go to Conn D20 -Pin 2? For manual transmissions, is this Conn just laying near the stick below the console?

Also, according to your instructions, it appears that I have the same configuration minus the ground. I have the red wire tapped into pin 4 of Conn D4 and the yellow wire tapped into Pin 3 - Conn D4. Would you agree that the misplacement of the black wire would cause my problem?


The black wire with the eyelet is only ground if the switch is hooked up to the relay assembly included with the kit. When you wire the switch into the OEM setup (using the OEM wiring and OEM relay) then that wire needs to see illumination power.

D20 is the unused connector in the console on a manual transmission Yaris.