kuyachris84Original postIllinois 路 Sep 18, 2009#1so I ordered a set of fog lights from garm (micro image)... and i have a question..
Is it suppose to come with instructions? Or am I suppose to find the instructions on here? Because mine didn't come with any instructions or diagrams.
Replies 4
1NZYaris1New Zealand 路 Sep 18, 2009#2pm' ed
have fun with the instal 馃憤
kuyachris84Thread starterIllinois 路 Sep 18, 2009#3So I haven't gotten up this this part since I'm a lil confused.. but when I do. How the hell do you get these wires plugged into pin#1 and Pin#2 where the R/BR and R/W wires sit? I mean you splice the wires but where do you get the end pieces to plug it in? You can't plug a naked wire in there... after splicing.
Picture lost 路 img4.imageshack.us
kuyachris84Thread starterIllinois 路 Sep 18, 2009#4So this is what I've gotten done so far. The confusing part is hooking the wiring up to the fuse box and what wire goes where. I tried following the tutorial of in this thread..
DIY (08' USDM Liftback): ESUSE Fog Light Install v2.0 but my harness wire that he splices here looks different than mine.
Picture lost 路 img260.imageshack.us So after cutting the wires from the harness... like this:
Picture lost 路 img402.imageshack.us How do you get them to fit inside the white socket in the fuse box like this?
Picture lost 路 img252.imageshack.us kuyachris84Thread starterIllinois 路 Sep 18, 2009#5This is what I've done so far.
Picture lost 路 img198.imageshack.us
Picture lost 路 img132.imageshack.us
Picture lost 路 img197.imageshack.us
Picture lost 路 img196.imageshack.us
Picture lost 路 img43.imageshack.us
Picture lost 路 img196.imageshack.us
Picture lost 路 img30.imageshack.us
Picture lost 路 img43.imageshack.us
Picture lost 路 img170.imageshack.us
Picture lost 路 img183.imageshack.us
Picture lost 路 img171.imageshack.us
Picture lost 路 img508.imageshack.us
Picture lost 路 img33.imageshack.us
Picture lost 路 img508.imageshack.us
Picture lost 路 img43.imageshack.us
Picture lost 路 img43.imageshack.us
Picture lost 路 img178.imageshack.us
Picture lost 路 img197.imageshack.us
From Here I don't know what the rest of the wires do. If you look at the harness thingy I'm holding up. It's different colors. Mostly red, white, black. The tutorials on this site have green / blue wires so this is what confuses me.
There's also a red wire that i don't see in other tutorials.. it looks like it goes to the positive battery ... but I'm assuming we don't need it if I can get it installed the methods you guys use.
Picture lost 路 img183.imageshack.us
Picture lost 路 img41.imageshack.us
Picture lost 路 img24.imageshack.us
Picture lost 路 img170.imageshack.us
Picture lost 路 img524.imageshack.us
Picture lost 路 img170.imageshack.us
Picture lost 路 img14.imageshack.us
Can someone help me or explain to me what I do with these wires?!? 馃し