Yarisworld Archive

Door Handle LED DIY with pics

94 posts · 79,904 views · page 2 of 2

Replies continued

bitz767Harrisburg, PA · Feb 18, 2010#51
Originally Posted by enobmort42 ↑
Does your dome light come on when you unlock your car?
lol, i checked that this morning when I got in the car, and it does.

I think it would be sweet at night to have the handles light up when you go to the car. Being a 3 door, this mod looks very doable...👍

So you Louisville guys want to get together and do this sometime?
DandiDaniJeff,Indiana · Feb 18, 2010#52
i do😛
kazama82Malaysia · Feb 18, 2010#53
i plan to do soon also..:)
enobmort42Denver, CO · Feb 18, 2010#54
Originally Posted by CTScott ↑
Attached picture not available

The connector (4K) on the upper left in this picture, is the feed to the map and dome lights. White with a black stripe ground, Pink is the "door open" switched ground, and blue is 12V fed from the DOME fuse.
To quote a thread I found on another thread. I would have taken this same picture...
enobmort42Denver, CO · Feb 18, 2010#55
Originally Posted by bitz767 ↑
lol, i checked that this morning when I got in the car, and it does.

I think it would be sweet at night to have the handles light up when you go to the car. Being a 3 door, this mod looks very doable...👍

So you Louisville guys want to get together and do this sometime?
I have an aftermarket power locks and alarm, so as it stands, mine don't do the fade on when I unlock it. Maybe I'll play around tomorrow and see if I can't get it to work 👍
bitz767Harrisburg, PA · Feb 18, 2010#56
Originally Posted by enobmort42 ↑
To quote a thread I found on another thread. I would have taken this same picture...
Yup, thats the pic that I found as well. Maybe I'll have time to tackle this next week
kazama82Malaysia · Feb 19, 2010#57
Originally Posted by enobmort42 ↑
To quote a thread I found on another thread. I would have taken this same picture...

i mean how u tap it..?..just slice the wire or put the wire at the connector?
kazama82Malaysia · Feb 19, 2010#59
owh..cool..i try to find in local store if they do sell this..to make job much easier..if not, i think just splicing the wire is the only way
RHDVIPbBLouisville, KY · Feb 19, 2010#60
Those door handles seem like it would be easy. How much do they cost though?
enobmort42Denver, CO · Feb 19, 2010#61
Originally Posted by bitz767 ↑
i was going to use something like this:
http://www.discountcarstereo.com/detail.aspx?ID=723
i bought a big box of them at wally world a few months ago for another project, but this was just a good pic of what i was talking about
Yup, that's exactly what I used. Worked like a charm!
kazama82Malaysia · Feb 20, 2010#62
just bought blue LEDs..and since it's a 3V LED (said by the shop), i put 1kOhm resistor for each LEDs,..had put it on veroboard..tomorrow will install it..i had bought a 2nd hand handle, so i dont have to drill a hole on mine..:)..had test it this morning on dome circuit, and work like a charm..:)
GeneralDon7Frederick, MD · Feb 21, 2010#63
Originally Posted by kazama82 ↑
just bought blue LEDs..and since it's a 3V LED (said by the shop), i put 1kOhm resistor for each LEDs,..had put it on veroboard..tomorrow will install it..i had bought a 2nd hand handle, so i dont have to drill a hole on mine..:)..had test it this morning on dome circuit, and work like a charm..:)
How much was your 2nd door handle? I'm thinking about doing this on mine in the spring, but I would want a second handle to try it on as well. Good choice on the blue LEDs 👍
kazama82Malaysia · Feb 23, 2010#64
bought for around RM40 so around $11 only..:)..i used blue LEDs since my car is white..:)
QmobileHoytville, ohio · Feb 23, 2010#65
I like it :)........hmmm and my next mod will be.......:D
fratzicaBucharest · Mar 17, 2010#66
How can I connect the leds from the door handles to the dome light? Do I have to take down the roof liner (or upholstery, I don`t know exactly how you call it)? I`m afraid to do this because of all the window airbags being stuck in there. Is there a separate fuse for the dome light so I can connect directly to it without tearing apart the car?

Thank you!
RevssonSoutheast Wisconsin · Mar 18, 2010#67
Originally Posted by fratzica ↑
How can I connect the leds from the door handles to the dome light? Do I have to take down the roof liner (or upholstery, I don`t know exactly how you call it)? I`m afraid to do this because of all the window airbags being stuck in there. Is there a separate fuse for the dome light so I can connect directly to it without tearing apart the car?

Thank you!
The answer is in this post on page 2:

Door Handle LED DIY with pics
fratzicaBucharest · Mar 19, 2010#68
What is a "cubbie"? 🙂
RevssonSoutheast Wisconsin · Mar 19, 2010#69
Actually, I think that means cubbie hole. I can't find a pic at the moment, but in the
owner's manual, they call it an auxiliary box. It's on the left side underneath the
instrument panel dimmer pot. See page 172 on here:
http://www.etimago.com/yaris/repairmanual/Owner's%20Manual.pdf

Otherwise, maybe CTScott has a pic somewhere on here.
fratzicaBucharest · Mar 20, 2010#70
Oh, i got it. Thanks a lot! Can`t wait to do this mod.
birdmanUSA · Mar 20, 2010#71
Amazing!
KimmyCorpus Christi, TX · Mar 20, 2010#72
Those look really awesome!!
MalifabianFort Worth, Texas · Apr 16, 2010#73
Dude props =D
MGarganoNJ · Apr 18, 2010#74
I tried every local auto parts store and two Radio Shacks and haven't been able to find ANY 12v LEDs in white. They have them in green and red only. Does anyone know where I might find these?
YarizSE Texas · Apr 18, 2010#75
Originally Posted by window_lee ↑
Finally I have time to take some pics of the DIY. Since my english is very poor, I will use pics instead of speaking. Hope this will help and feel free to ask questions and add comments.

I am having a 5 Dr yaris, so I will start with the front door and you can get the LEDs from Walmart for $10 (4 of them)

1. open the front door and locate the black stuff which cover the screw and remove it
2. unscrew the screw (the screw has something to hold on to it, so no worry it will fall into the door)
3. after you unscrew it, remove the lock and the handle
slide the handle toward the back of the car and remove it
4. drill a hole in the handle and put your LED in it (I used hot glue to keep the LED in place)
5. run the wire in the door and through the wire tube into the car
Now come to the rear door
6. For the rear door, we have to remove the lock in order to get to the screw, so we have to remove the door panel and there are only two screw for the door panel.
7. remove the cable for the lock and unplug any wire for the power window or whatever u have.
8. after remove the door panel, u can unplug the wire and remove the lock
9. u will be able to see the screw after u remove the lock
10. remove the door handle the same way u do for the front door
again run the LED wire through the wire tube into the car
Now u can connect your LED wherever u want. I run the wire to the keyless dome light circuit, so when i open the door, this will come on
Hope u guys like it
(Pix Removed)

First of all GREAT IDEA, and I am sorry your English is not the greatest (Cantonese/Mandirin/Japanese?), but I am going to see if you mind adding some stuff to this how-to? I am doing to create the ultimate how-to, and I could use some help.

Things to add (if you don't mind):

PARTS:

LED's (WHERE EXACTLY YOU GOT THEM, MODEL NM, Description):
  • Were these LED's individually packaged, or in a kit?(Kit SKU?)
  • If individually packaged how did you wire them? (LED's require voltage regulation)
  • Where did you purchase them (department/area of store)
Tape: Kind/How Much
Wire Nuts (or equiv.)


TOOLS:
Screwdriver: Torx (Exact Size)
Power Drill
Drill Bits (size)


Not trying to be rude, this is an awesome how to. But I would like to put it in a big How-To document for the people on here. Not like the ones we have, but more of a detailed instructional how-to. I want to have all the details so you are not looking around for a part or tool after you one and only car is pulled apart (might have happened to me before) :P


If anyone else has something they want to put it let me know, and I will reformat and let you know what is needed if something needs to be added.


Thanks, 🎉🙌
6609_1172471907874_1110301173_535101_1063795_n.jpg.jpg
YarizSE Texas · Apr 18, 2010#76
Originally Posted by MGargano ↑
I tried every local auto parts store and two Radio Shacks and haven't been able to find ANY 12v LEDs in white. They have them in green and red only. Does anyone know where I might find these?

Autozone:
http://tinyurl.com/LEDYARIS


I had to shorten it, was long.. But autozone.com and the stores have them. Radioshack carries them, and a few thousand people online. If you need something weird like a tri color or something let me know and I can find it if you need.
MGarganoNJ · Apr 18, 2010#77
This one looks good, but it isn't available online or for pickup at my local AutoZone.

Both Radio Shacks near me only had red and green, no blue or white. Ideally I'd like a pre-wired white LED with some kind of holder.

Something like this, only in white
YarizSE Texas · Apr 18, 2010#78
Originally Posted by MGargano ↑
This one looks good, but it isn't available online or for pickup at my local AutoZone.

Both Radio Shacks near me only had red and green, no blue or white. Ideally I'd like a pre-wired white LED with some kind of holder.

Something like this, only in white

Yeah, I don't know NJ, but in Houston we have Fry's, and EPO. The will have that, but I am not sure you will have anything like that there.🤘
MGarganoNJ · Apr 18, 2010#79
Originally Posted by Yariz ↑
Yeah, I don't know NJ, but in Houston we have Fry's, and EPO. The will have that, but I am not sure you will have anything like that there.🤘
Aside from Radio Shack, I'm out of options for electronics stores that I know of. I tried AutoZone, Advance Auto Parts, R&S Strauss on whim, but no dice.

I doubt Target or Best Buy carry these kind of electronics.
YarizSE Texas · Apr 18, 2010#80
Originally Posted by MGargano ↑
Aside from Radio Shack, I'm out of options for electronics stores that I know of. I tried AutoZone, Advance Auto Parts, R&S Strauss on whim, but no dice.

I doubt Target or Best Buy carry these kind of electronics.


What EXACTLY are you looking for ? If it exists I can tell you where..
MGarganoNJ · Apr 18, 2010#81
This, but with a white LED instead of red.
ryotaRochester NY · Aug 31, 2010#84
does anyone else who has this done have any pictures? I'm seriously contemplating doing this but would like to see it on other colored cars. I have a meteorite metallic and am trying to figure out the best color. haha I also don't have the super bright lights like the OP so mine wouldn't match like his does (props for that btw)
TickleTimeTimArkansas · Aug 31, 2010#85
i read this whole post without being able to see pics (work computer) so i reread it on iphone to see pictures...well worth it. Looks awesome.
teawrecksCalifornia · Sep 10, 2010#86
brilliant! it looks great

really good job on this. i am inspired
kayyesydney · Aug 31, 2011#87
any tips on how to run the wire through the wire tube in the door?
I took apart my door today just to see what i was working with, but trying to run the wire through the door tube looks really hard...any tips?
VincebNova Scotia, Canada · Aug 31, 2011#88
shrink wrap the wires or electrical tape them together, should make it easier to pull through
QmobileHoytville, ohio · Sep 19, 2011#89
ok I've decided....I'm gonna do it! been puttin it off long enough
Armughaanlondon · May 31, 2012#90
Hi, Excellent idea. Did you had to put any current limitting resistors so that they don't burn out?
packetraceQuebec · May 31, 2012#91
of course...

normally we drive 20mA trough a led...


Voltage of resistor = 12V - spec voltage of led normally between 2 and 5...
Resistor = Voltage/Current

R= resistor voltage/0.02A = X ohms resistor...👍
ezhacker1San Francisco · May 31, 2012#92
i just realized that i started this mod a long time ago, but never finished it, the leds are in place but wires go nowhere. Guess i gave up trying to route the wires.

Must finish now..
LA YarisLos Angeles CA · May 31, 2012#93
This Mod kick-ass 👍
packetraceQuebec · May 31, 2012#94
I will do it next week for sure :D!

Route the wire via the sealed tube between door and car...it really easy... :)