Yarisworld Archive

Door Handle LED DIY with pics

94 posts · 79,904 views · page 1 of 2

window_leeOriginal postCanada · Sep 3, 2009#1
Finally I have time to take some pics of the DIY. Since my english is very poor, I will use pics instead of speaking. Hope this will help and feel free to ask questions and add comments.

I am having a 5 Dr yaris, so I will start with the front door and you can get the LEDs from Walmart for $10 (4 of them)

1. open the front door and locate the black stuff which cover the screw and remove it



2. unscrew the screw (the screw has something to hold on to it, so no worry it will fall into the door)



3. after you unscrew it, remove the lock and the handle



slide the handle toward the back of the car and remove it



4. drill a hole in the handle and put your LED in it (I used hot glue to keep the LED in place)



5. run the wire in the door and through the wire tube into the car



Now come to the rear door

6. For the rear door, we have to remove the lock in order to get to the screw, so we have to remove the door panel and there are only two screw for the door panel.





7. remove the cable for the lock and unplug any wire for the power window or whatever u have.







8. after remove the door panel, u can unplug the wire and remove the lock





9. u will be able to see the screw after u remove the lock



10. remove the door handle the same way u do for the front door





again run the LED wire through the wire tube into the car



Now u can connect your LED wherever u want. I run the wire to the keyless dome light circuit, so when i open the door, this will come on


Hope u guys like it

Replies 93

nick.dollimountHalifax, NS Canada · Sep 3, 2009#2
Do you have any pictures of them fully installed and turned on at night?
nick.dollimountHalifax, NS Canada · Sep 3, 2009#3
That looks wicked!=D
mrbondIllinois · Sep 3, 2009#4
Where was the keyless dome light circuit in your car? What I mean is, how far did you have to thread the LED wire into the car?

It looks awesome, by the way.
Sodium DuckWestern Mass. · Sep 3, 2009#5
+1
window_leeThread starterCanada · Sep 3, 2009#6
Originally Posted by mrbond ↑
Where was the keyless dome light circuit in your car? What I mean is, how far did you have to thread the LED wire into the car?

It looks awesome, by the way.
where I connect my LEDs is very close to the dome light, so the LED wire is long
the_bossMontreal Qc · Sep 3, 2009#7
[QUOTE=window_lee;378648]Finally I have time to take some pics of the DIY. Since my english is very poor, QUOTE]

Where you from? because your english is not bad at all compared to the people I talk to all day long!

good DIY! might look into this very soon also!🎉
BuildCodeNorthern Illinois · Sep 3, 2009#8
dude that's awesome, and awesome pics, thank you :)
window_leeThread starterCanada · Sep 3, 2009#9
[QUOTE=the_boss;378990]
Originally Posted by window_lee ↑
Finally I have time to take some pics of the DIY. Since my english is very poor, QUOTE]

Where you from? because your english is not bad at all compared to the people I talk to all day long!

good DIY! might look into this very soon also!🎉
I am from Hong Kong and now i am in Canada
nick.dollimountHalifax, NS Canada · Sep 4, 2009#10
[QUOTE=window_lee;379039]
Originally Posted by the_boss ↑

I am from Hong Kong and now i am in Canada
What part of Canada?👍
JumpmanYarisSO. INDIANA · Sep 4, 2009#11
very cool seems easy but i am kinda inpatient for this kinda stuff. How lond did it take u?
window_leeThread starterCanada · Sep 4, 2009#12
[QUOTE=nick.dollimount;379302]
Originally Posted by window_lee ↑

What part of Canada?👍
I am now in Kamloops
window_leeThread starterCanada · Sep 4, 2009#13
Originally Posted by JumpmanYaris ↑
very cool seems easy but i am kinda inpatient for this kinda stuff. How lond did it take u?
It took me half day to get everything done, since I had to remove many stuffs in order to run the wire
cali yarisCanoga Park, CA · Sep 4, 2009#14
absolutely BRILLIANT. 👏
Red HorseCosta mesa, California · Sep 5, 2009#15
How did you come up with this idea? Cause its B E Autiful.
djgab101australia · Sep 5, 2009#16
u can find these lights on the new bmw 135i twin turbo
window_leeThread starterCanada · Sep 5, 2009#17
Originally Posted by Red Horse ↑
How did you come up with this idea? Cause its B E Autiful.
I got this idea from a BMW ahhahaha
mrbondIllinois · Sep 5, 2009#18
^ this idea was also in the Vitz Hyper Rev. There's a lot of things you can do with LEDs, as y'all can see with the pictures.
chongopantsHouston · Sep 19, 2009#19
nice, what about the voltage. How did you drop it so it doesn't pop the LED, and what about polarity? Is this a kit. LEDs dont usually take 12v...
ivanmadelineNC · Oct 17, 2009#21
Nice and good DIY
window_leeThread starterCanada · Oct 20, 2009#22
Originally Posted by chongopants ↑
nice, what about the voltage. How did you drop it so it doesn't pop the LED, and what about polarity? Is this a kit. LEDs dont usually take 12v...
the LED i got is 12V, so no worries about dropping the voltage
bronsinnj · Oct 20, 2009#23
I think in NJ (maybe) you get busted for that. A friend got busted for his bike with neons on the valve caps.
KCALB SIRAYVirginia · Oct 20, 2009#24
really nice. any pictures with the doors shut?
enobmort42Denver, CO · Oct 20, 2009#25
That looks amazing! I think I'm going to go do this today! I saw it on my neighbor's BMW, too, but I didn't even think to do it myself! :D
Sora65Brampton · Oct 22, 2009#26
I'd do this if i knew where and how to wire and where to get the power from and stuff..
can anyone explain?
im so interested in this
enobmort42Denver, CO · Oct 22, 2009#27
I have mine hooked up to the dome wire, so it fades in and out when the doors open and close. It looks pretty pimp! Lol. You can find that wire behind the pull out cubbie on the driver's side. It's the 7-pin plug on the upper left. Connect the + lead to the blue wire and the - to the pink. ^_^
bosbikPinas · Oct 25, 2009#28
wow!!..that's amazing!
RevssonSoutheast Wisconsin · Oct 26, 2009#29
If it's not on while you are driving, then I would think it is okay to do.
Nice idea!
Mr YarismanUSA · Oct 29, 2009#30
🤤
Looks awesome!!!
Benggolf2Richmond, B.C., Canada · Nov 19, 2009#31
Great job Window_Lee. 👍
advocatelocation · Nov 19, 2009#32
Great DIY and definitely great mod. This looks like it requires a TON of work though. That's good for you since the mod will be unique but bad for us!
TinyGiantRochester, NH · Nov 19, 2009#33
i'll be doing this for sure! thanks for the DIY
YarisSedanCalifornia - Bay Area · Jan 2, 2010#34
Looks like i have another mod for my list. Gona attempt this on the drivers doors first and see how it goes. I like the idea if connecting it to the dome light so it fades in and out. So when i press the unlock on my keyfob at night the handles fade in and makes it easier and safer to get in the car and when you start the car they will fade out for a cool effect.
GeneralDon7Frederick, MD · Jan 2, 2010#35
Originally Posted by YarisSedan ↑
Looks like i have another mod for my list. Gona attempt this on the drivers doors first and see how it goes. I like the idea if connecting it to the dome light so it fades in and out. So when i press the unlock on my keyfob at night the handles fade in and makes it easier and safer to get in the car and when you start the car they will fade out for a cool effect.
agreed now im wanting to do this too when spring arrives. 😁
kazama82Malaysia · Feb 17, 2010#36
i plan to do this..but quick question, do i need a relay or i can just install the wiring directly to the dome circuit (blue and pink wire.)
kazama82Malaysia · Feb 17, 2010#37
i think if we want to used normal LED, we need 1K ohm resistor install together..
enobmort42Denver, CO · Feb 17, 2010#38
I didn't use any resistors. It's straight up plug 'n play. I can't remember where I got the LEDs, but I'm almost 95% certain they're the standard white LEDs from Advance AutoParts.
tk-421Dagobah · Feb 17, 2010#39
Originally Posted by Revsson ↑
If it's not on while you are driving, then I would think it is okay to do.
Nice idea!
Actually, what if the LEDs were wired to the side blinkers? I think it would be sorta functional and look pretty cool (probably have to be in amber to be legal though).
kazama82Malaysia · Feb 17, 2010#40
actually, here we have this kind of handle..dunno if we have it in the states..

Picture lost · img.mudah.my
kazama82Malaysia · Feb 17, 2010#41
Originally Posted by enobmort42 ↑
I didn't use any resistors. It's straight up plug 'n play. I can't remember where I got the LEDs, but I'm almost 95% certain they're the standard white LEDs from Advance AutoParts.
i will try to asked the shop tomorrow if the LED can sustain 12V..i tot of putting like small o-ring surround the LED as here, we have plenty of rain..afraid i will short something..
enobmort42Denver, CO · Feb 17, 2010#42
Originally Posted by kazama82 ↑
i will try to asked the shop tomorrow if the LED can sustain 12V..i tot of putting like small o-ring surround the LED as here, we have plenty of rain..afraid i will short something..
That could work. What I've found is you can hot glue it in there, too. It seals it up nice and keeps it from going anywhere. I'm interested to hear back about the resistors, though. While I don't think they're necessary, it doesn't hurt to be 100% :-p
kazama82Malaysia · Feb 17, 2010#43
hi enobmort42, can you snap a picture showing how u hookup the wiring at the blue and pink wire?..do you just tap the wire?
enobmort42Denver, CO · Feb 17, 2010#44
Sure, I'll do that in the morning when it's lighter out. It's pretty simple to find..
RHDVIPbBLouisville, KY · Feb 17, 2010#45
Originally Posted by kazama82 ↑
actually, here we have this kind of handle..dunno if we have it in the states..

Picture lost · img.mudah.my
ooh. I want a set of those.
JumpmanYarisSO. INDIANA · Feb 17, 2010#46
Originally Posted by RHDVIPbB ↑
ooh. I want a set of those.
How about we get together n do the OPs mod
RHDVIPbBLouisville, KY · Feb 18, 2010#47
Originally Posted by JumpmanYaris ↑
How about we get together n do the OPs mod
hey, I am down. Let me know
kazama82Malaysia · Feb 18, 2010#48
my place, quite cheap..less than USD100..the blue light will connect to small light, the amber will connect to the blinker..very neat..you can always connect the blue light at the dome light if you want..
bitz767Harrisburg, PA · Feb 18, 2010#49
Could there be a way to make the handle light up after you press the unlock button on the power lock remote?
enobmort42Denver, CO · Feb 18, 2010#50
Originally Posted by bitz767 ↑
Could there be a way to make the handle light up after you press the unlock button on the power lock remote?
Does your dome light come on when you unlock your car?