both are pretty expensive and the flukes are really expensive, i just need to know that the alt is putting out at least 75% of what it says
Big 3 Upgrade: Planning Stage (Input Encouraged)
145 posts · 40,685 views · page 3 of 3
Replies continued
🎉
just for a slight mini-update i threw a DMM on the amp while driving and while idle (at stop lights etc) and proceeded to play bass heavy rap music with lines around the 38-45hz range (ying yang twins etc)
While driving around 40-45mph the voltage was about 14.20-14.24 and would drop to about 14.12 and sometimes 14.08 without pretty damn loud bass as far as my amp and subs are concerned.
Before the HO alt although I did not take records the voltage would drop maybe 3-4 times as much at least in similar situations.
I do however have one thing to ask of a fellow yarisworlder, I would like someone to monitor the voltage at a complete idle stop that lasts for at least 20-30 seconds with no load. Preferably while driving around town and at a stop light or sign
The reason for this is the HO alt will hover around 13.13-13.30 (ill reconfirm) at dead stop idle and I want to contrast this to a real world situation with the stock alt.
just an overview of numbers for whoever wants to know with the HO alt.
Idle in Drive: 13.20 - 13.30
Idle in Park: 13.44 - 13.50
Idle in Neutral: Nearly same as in Park
Driving after warmed up: 14.17-14.23 +- .07 volts
Highway Driving: Same as above
While driving around 40-45mph the voltage was about 14.20-14.24 and would drop to about 14.12 and sometimes 14.08 without pretty damn loud bass as far as my amp and subs are concerned.
Before the HO alt although I did not take records the voltage would drop maybe 3-4 times as much at least in similar situations.
I do however have one thing to ask of a fellow yarisworlder, I would like someone to monitor the voltage at a complete idle stop that lasts for at least 20-30 seconds with no load. Preferably while driving around town and at a stop light or sign
The reason for this is the HO alt will hover around 13.13-13.30 (ill reconfirm) at dead stop idle and I want to contrast this to a real world situation with the stock alt.
just an overview of numbers for whoever wants to know with the HO alt.
Idle in Drive: 13.20 - 13.30
Idle in Park: 13.44 - 13.50
Idle in Neutral: Nearly same as in Park
Driving after warmed up: 14.17-14.23 +- .07 volts
Highway Driving: Same as above
At 65 mph my SGII says about 13.7 - 13.8, no extra load. Help any lol
I have a quick question. What would it hurt for me to get a 300 A alt and not have a system that can really use it? Anything?
I have a quick question. What would it hurt for me to get a 300 A alt and not have a system that can really use it? Anything?
well for one i dont even know that my alt will do 300A, I personally dont think it can or will just because that would be an absolutely amazing feat.
Also I have no way of presenting a load of 300A or even 200...or 150 for that matter. My amp draws maybe 70A full tilt and my A/C & Lights draw maybe 30 tops. So I could at idle test for maybe 100A through my clamp meter (that im still waiting for).
With that hard of a load im EXPECTING no more of a drop in voltage than .30 volts at idle otherwise ill be mad.
Anyways...I need to come up with a way to test amperage while highway driving and I know im suppose to test it right at the alt but ill consider just clamping it at amp and having someone ride with me, we'll see how that works out.
What does your SG2 show for voltage at idles/stops?
Also I have no way of presenting a load of 300A or even 200...or 150 for that matter. My amp draws maybe 70A full tilt and my A/C & Lights draw maybe 30 tops. So I could at idle test for maybe 100A through my clamp meter (that im still waiting for).
With that hard of a load im EXPECTING no more of a drop in voltage than .30 volts at idle otherwise ill be mad.
Anyways...I need to come up with a way to test amperage while highway driving and I know im suppose to test it right at the alt but ill consider just clamping it at amp and having someone ride with me, we'll see how that works out.
What does your SG2 show for voltage at idles/stops?
I see you're getting some time on this alty.
What are your thoughts of the performance so far? Is it worth the money? Would you buy from Iraggi again?
What are your thoughts of the performance so far? Is it worth the money? Would you buy from Iraggi again?
so far the only thoughts i have arent very scientific ones.
The voltage does seem to drop far less with far more bass which is a good sign but I'm hesitant to believe it could ever put out 300A but thats a personal biased thing.
i need to have a way to present a load of at least 250A to the alt while highway driving with a voltage drop of NO MORE than .5 volts to be content.
Who wants to loan me a 2500+ Watt amp?
The voltage does seem to drop far less with far more bass which is a good sign but I'm hesitant to believe it could ever put out 300A but thats a personal biased thing.
i need to have a way to present a load of at least 250A to the alt while highway driving with a voltage drop of NO MORE than .5 volts to be content.
Who wants to loan me a 2500+ Watt amp?
Also, Is the factory Alt to batt wiring a straight shot through the loom to the battery? If so Im going to just cut the connector off the stock wiring and crimp it back on to a new run of 4 gauge back to the OEM batt. loaction and call it a day.
Ok, so I watched my SGII today. In park, no load, it runs at 13.6 to 13.7 staying mostly in 13.7. In drive, holding break, it runs at 13.5 to 13.6, swapping between the two fairly fifty fifty. I applied my largest potential load, in Park, and it ran 13.3, dipping occasionally to 13.2 but only on really hard notes.
BTW, correction to my last post, between 65 & 70 the SGII shows almost a constant 14.0 volts. Occasionally dipping to 13.9 but only a few times. It also showed 14.1 a few times but not enough to be considered a constant charging voltage.
Hope this helps
BTW, correction to my last post, between 65 & 70 the SGII shows almost a constant 14.0 volts. Occasionally dipping to 13.9 but only a few times. It also showed 14.1 a few times but not enough to be considered a constant charging voltage.
Hope this helps
this actually doesn't surprise me.... You now have a more stable voltage... though it is slightly lower (than the max voltage on the oem alt)... stable voltage is much better, you may feel bummed...due to the lower voltage... but you should be happy.... that alt will last much longer than the oem would've.
well i just got my volt meter in, ill be installing it asap and monitoring voltage throughout all scenarios and reporting back in a day or so
sigh...
well idk whats to be expected from a HO alt because Ive never owned one but here's how things are as of today after many observations, tests and metering.
If I put on a truly low deep and bass heavy song a crank it loud BUT still clear the voltage will plummit to 12.75-12.85 a.k. the battery
....that fkn sucks even if it is only for a split second I dont want to be tapping the battery.
I didnt think my little 1000rms amp would be able to make this "badass" alt surrender but i guess so.
I talked to iraggi and he thought maybe the belt was slipping for a second on the hits but i seriously doubt it...but he knows more so im going to pick up a brand new stock belt and swap it.
If that doesnt alleviate the problem (dont think it will) then idk what his solution will be.
Since the alt does seem to be performing better than stock maybe ill just have him give me a 180A stock casing alt instead and refund the difference.
I'll stay hopeful though.
Should a 300A alt at 80MPH be able to sustain consistent voltage during deep bass hits at high volumes?
I mean my amp has an 80amp internal fuse so that means it wont pull more than 80 or so amps...right? He says no and its pulling more than that for sure...
so idk, feel free to comment
well idk whats to be expected from a HO alt because Ive never owned one but here's how things are as of today after many observations, tests and metering.
If I put on a truly low deep and bass heavy song a crank it loud BUT still clear the voltage will plummit to 12.75-12.85 a.k. the battery
....that fkn sucks even if it is only for a split second I dont want to be tapping the battery.
I didnt think my little 1000rms amp would be able to make this "badass" alt surrender but i guess so.
I talked to iraggi and he thought maybe the belt was slipping for a second on the hits but i seriously doubt it...but he knows more so im going to pick up a brand new stock belt and swap it.
If that doesnt alleviate the problem (dont think it will) then idk what his solution will be.
Since the alt does seem to be performing better than stock maybe ill just have him give me a 180A stock casing alt instead and refund the difference.
I'll stay hopeful though.
Should a 300A alt at 80MPH be able to sustain consistent voltage during deep bass hits at high volumes?
I mean my amp has an 80amp internal fuse so that means it wont pull more than 80 or so amps...right? He says no and its pulling more than that for sure...
so idk, feel free to comment
Man that sucks. Here's the best way you can test it:
Take it to a local place that rebuilds alts. Some hole-in-the-wall place, because they usually test them for free. They have machines they stick them on and turn them and check the output. Some places can print out the test results and they look kinda like dyno sheets, except for alts. 👍
That way you can be like, "Okay, listen here, this shit don't work as advertised."
Ex:
Take it to a local place that rebuilds alts. Some hole-in-the-wall place, because they usually test them for free. They have machines they stick them on and turn them and check the output. Some places can print out the test results and they look kinda like dyno sheets, except for alts. 👍
That way you can be like, "Okay, listen here, this shit don't work as advertised."
Ex:
4 attachments not included in this copy
like you wouldn't believe lol.Originally Posted by talnlnky ↑doesn't fluke rebadge a lot of its meters for other companies tho???
from those graphs it seems some alts dont put out until wayyy up on the rpm line where its not even normal
Hmmm...
Very interesting.
Here's what I think I'll do. I'll buy a Powerbastards 220 Ampere unit. I'll get it with an overdrive pulley and we'll see what happens. We'll install it in the shop and do the tests there simply because we've got the equipment to test it as well as keep a charge if anything should happen.
We'll see if this company's claims of 1200 RPM full output to 220 amperes are even near to being close.
I'm bummed that this Iraggi alternator didn't work as advertised.
Very interesting.
Here's what I think I'll do. I'll buy a Powerbastards 220 Ampere unit. I'll get it with an overdrive pulley and we'll see what happens. We'll install it in the shop and do the tests there simply because we've got the equipment to test it as well as keep a charge if anything should happen.
We'll see if this company's claims of 1200 RPM full output to 220 amperes are even near to being close.
I'm bummed that this Iraggi alternator didn't work as advertised.
Yeah, this whole situation is a clusterfuck. Everyone claims they have the best HO alt, but none can deliver.
Has anyone considered doing a multi-alt setup? I know our engine bay is small, but I've seem some creative things before.
Has anyone considered doing a multi-alt setup? I know our engine bay is small, but I've seem some creative things before.
I'm seeing the same. Like Goku mentioned, if one of us put together a dual alternator setup, with one isolated for the use of the sound system...
if somebody had the means to fabricate custom brackets that would probably be the best & cheapest way as you can often go to junkyards and find alts for under $20... I remember a few years back in Spokane,WA there was a junkyard that would sell you alts for $8... tho you had to remove it yourself.Originally Posted by sqcomp ↑I'm seeing the same. Like Goku mentioned, if one of us put together a dual alternator setup, with one isolated for the use of the sound system...
The yaris/echo has been out long enough to have a few cars in the junkyard by now. Tho... if I was going to do custom bracket... I'd be tempted to just pull one from a truck that had like a 100-140amp alt.
one drawback to dual alts would be more load on the engine than a single alt, thus lower mpg's... prolly less than 1mpg difference tho.
EDIT:
Architect
I'm starting to wonder if there is something weird with your car... you dropped cable a while back and then said your voltage was funny after that.... Did you have your battery tested.... maybe you have a bad cell in your battery that is causing a wierd issue.... constantly trying to charge thus sucking amperage, thus lowering voltage... i dunno... be worth checking out tho.
Yea when i did that I essentially grounded the stock alternator which mustve messed up some of the internals causing it to charge poorly.Originally Posted by talnlnky ↑if somebody had the means to fabricate custom brackets that would probably be the best & cheapest way as you can often go to junkyards and find alts for under $20... I remember a few years back in Spokane,WA there was a junkyard that would sell you alts for $8... tho you had to remove it yourself.
The yaris/echo has been out long enough to have a few cars in the junkyard by now. Tho... if I was going to do custom bracket... I'd be tempted to just pull one from a truck that had like a 100-140amp alt.
one drawback to dual alts would be more load on the engine than a single alt, thus lower mpg's... prolly less than 1mpg difference tho.
EDIT: r
Architect
I'm starting to wonder if there is something weird with your car... you dropped cable a while back and then said your voltage was funny after that.... Did you have your battery tested.... maybe you have a bad cell in your battery that is causing a wierd issue.... constantly trying to charge thus sucking amperage, thus lowering voltage... i dunno... be worth checking out tho.
My yellow top sits at 12.75 cold and the alt charges normally.
Ill just take my battery to autozone for a battery test but a hot test would be misleading so idk
Hook it up with daul "Walmart specials" now... get two of the walmart everstart 1000CA bats.. they are like $70-80 a pop... run them in parallel... will have way more performance than any single car audio battery would have, and cost the same as a yellow top.Originally Posted by The Architect ↑Yea when i did that I essentially grounded the stock alternator which mustve messed up some of the internals causing it to charge poorly.
My yellow top sits at 12.75 cold and the alt charges normally.
Ill just take my battery to autozone for a battery test but a hot test would be misleading so idk
Had a buddy run three or four of those in his civic hatchback... think he fit them all in the spare tire well too. Maybe he had one up front.... long time ago... hard to remember for sure. He was running round 4kw's and a 0.7ohm load on 2ohm amps ... fun times.
Three words:Originally Posted by talnlnky ↑Hook it up with daul "Walmart specials" now... get two of the walmart everstart 1000CA bats.. they are like $70-80 a pop... run them in parallel... will have way more performance than any single car audio battery would have, and cost the same as a yellow top.
Had a buddy run three or four of those in his civic hatchback... think he fit them all in the spare tire well too. Maybe he had one up front.... long time ago... hard to remember for sure. He was running round 4kw's and a 0.7ohm load on 2ohm amps ... fun times.
Sulfuric acid fumes.
Not so fun times.
idk whats going on with both yours and his statements haha, maybe its bc i read them when i was half unconsciousOriginally Posted by goku87 ↑Three words:
Sulfuric acid fumes.
Not so fun times.
Three wordsOriginally Posted by goku87 ↑Three words:
Sulfuric acid fumes.
Not so fun times.
Vented battery box
if it's really a problem you just have to seal the batteries in a box, and then make a vent that goes outside so the fumes don't get in the cabin of the car. I question how much of an issue that really is anyway.
If the box is too much work... could try and find the cheapest sealed/non-venting batteries you can get.... do the Exide orbitals release gas? they aren't that expensive are they.
so im starting to think theres something to this whole "belt slippage" thing.
on the way home from work i was only going maybe 40MPH and the multi/clamp meter was reading about 14 volts.
I then turned on lil johns "push that n***a push that h*e" for those that might like that sorta thing and then ramped it up to 48 on my HU which is pretty damn loud and the voltage was falling to maybe 13.7-13.8 which is fine. For just a second though it fell to the 12's so im being the optimist.
I just ordered a new dayco serp belt that "exceeds oe spec" and ill be giving that a shot and tightening the living hell out of the thing when i put it on.
on the way home from work i was only going maybe 40MPH and the multi/clamp meter was reading about 14 volts.
I then turned on lil johns "push that n***a push that h*e" for those that might like that sorta thing and then ramped it up to 48 on my HU which is pretty damn loud and the voltage was falling to maybe 13.7-13.8 which is fine. For just a second though it fell to the 12's so im being the optimist.
I just ordered a new dayco serp belt that "exceeds oe spec" and ill be giving that a shot and tightening the living hell out of the thing when i put it on.
belt slippage is a real issue...i've seen it before... When a big bass hit happens, large voltage dip causes the alt to engage and try to make a lot of power.... which means it puts a large load on the belt... if the belt is loose, even the slightest bit it may slip.
Saw this in a durango with six 15's and a 2200rms amp. Every time he cranked it we'd hear a squeal for a few seconds.... finally took a look at the belt and it needed tightening.
your alt can do what.... 280, 300 amps... that alt is very capable of putting a big load on that belt. I would think the belt would have to be even tighter than stock to ensure the belt didn't slip.
Saw this in a durango with six 15's and a 2200rms amp. Every time he cranked it we'd hear a squeal for a few seconds.... finally took a look at the belt and it needed tightening.
your alt can do what.... 280, 300 amps... that alt is very capable of putting a big load on that belt. I would think the belt would have to be even tighter than stock to ensure the belt didn't slip.
The only time i ever hear a belt squeal is when i first turn on the car, other than that i cant hear or notice it at all during hits or anything and ive been outside the car for them.Originally Posted by talnlnky ↑belt slippage is a real issue...i've seen it before... When a big bass hit happens, large voltage dip causes the alt to engage and try to make a lot of power.... which means it puts a large load on the belt... if the belt is loose, even the slightest bit it may slip.
Saw this in a durango with six 15's and a 2200rms amp. Every time he cranked it we'd hear a squeal for a few seconds.... finally took a look at the belt and it needed tightening.
your alt can do what.... 280, 300 amps... that alt is very capable of putting a big load on that belt. I would think the belt would have to be even tighter than stock to ensure the belt didn't slip.
as soon as the new belt comes in ill allot some time to swap it and ill make sure to have someone very strong with so as to get a really fkn tight belt.
is over tightening something to worry about because im not sure what threshold to restrain to.
i really don't know if you can have a belt too tight....
for reference... i've never heard my belt squeal. I also only have a 150 watt amp in my car.... and have never ran my battery low. I want this stock battery to last me 5-6 years.... I'm a cheap bastage.
for reference... i've never heard my belt squeal. I also only have a 150 watt amp in my car.... and have never ran my battery low. I want this stock battery to last me 5-6 years.... I'm a cheap bastage.
well this morning when i started my car and started monitoring voltage a saw a drastic difference in behavior from my electrical system.
for one the voltage hung around 14.45-14.5 for about 3 minutes or so before calming down to 14.3-14.4 and then finally stayin at 14.35/6 which is....very nice and unexpected.
The voltage seems very stable also (with the occasional hiccup) even with loud music and at idle in Drive it stays around 13.6-13.8 and in P or N its around 13.9-14.1
I dont know what to attribute it to but im about to go redo as much of my engine wiring as i can for preventative maintenance before it gets dark.
for one the voltage hung around 14.45-14.5 for about 3 minutes or so before calming down to 14.3-14.4 and then finally stayin at 14.35/6 which is....very nice and unexpected.
The voltage seems very stable also (with the occasional hiccup) even with loud music and at idle in Drive it stays around 13.6-13.8 and in P or N its around 13.9-14.1
I dont know what to attribute it to but im about to go redo as much of my engine wiring as i can for preventative maintenance before it gets dark.
hmmmm....Originally Posted by The Architect ↑well this morning when i started my car and started monitoring voltage a saw a drastic difference in behavior from my electrical system.
for one the voltage hung around 14.45-14.5 for about 3 minutes or so before calming down to 14.3-14.4 and then finally stayin at 14.35/6 which is....very nice and unexpected.
The voltage seems very stable also (with the occasional hiccup) even with loud music and at idle in Drive it stays around 13.6-13.8 and in P or N its around 13.9-14.1
I dont know what to attribute it to but im about to go redo as much of my engine wiring as i can for preventative maintenance before it gets dark.
i mean just last night i reattached my amps ground with a set screw super duper ring terminal from knu konceptz and drove it down into the frame pretty well but thats the only difference.
Picture not included in this copy
At work we call this FM...
F**&ing magic lol
F**&ing magic lol
if your checking voltage at the amp... then the new ground could've made a difference... but if you are checking it from a fuse box, or direct from the battery that wouldn't have made a measurable difference.
well ive done both, when driving ive got the probes to the DMM inserted directly into the amps 1/0 cable but for testing purposes i was at the engine bay with the dmm at the alt and batt so idk.Originally Posted by talnlnky ↑if your checking voltage at the amp... then the new ground could've made a difference... but if you are checking it from a fuse box, or direct from the battery that wouldn't have made a measurable difference.
Im now redoing all the engine bay connections to be 100%
some up to date engine bay pics with 95% finished electrical
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Very snazzy wire rap. Where did you pick that stuff up from?
my work, its just .5" flex guard or cable guard etc.
this place has some http://www.electriduct.com/Braided-Sleeving_c_148.html
this place has some http://www.electriduct.com/Braided-Sleeving_c_148.html
Flexo PET...it's from Techflex. Great stuff. Partsexpress sells it as well. I'd love to see these pics that A has put up but this government computer blocks them...
I'll have to wait until tonight to look at them.
I'll have to wait until tonight to look at them.
Hi all i did my big 3 this past fall just got my new camera so here we go!👏
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
🤘
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
🤘
...thread rising from the grave!
Heck, I'll join in on the Big 3 fun:
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
I'm trying to find one more pic...I think it's the engine to chassis ground...
Heck, I'll join in on the Big 3 fun:
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
I'm trying to find one more pic...I think it's the engine to chassis ground...
great pics and along with the MPG bump, which I totally believe because I know with my current draw (pardon the pun) I have lost MPGs, do you think that this affects power/torque band stability?
Nice and clean sqcomp! i need to change out my bolt on the alt ground its a bit rusty, dont forget the no-ox keeps it clean👍
sqcomp do you have a fuse from alt positive to battery positive? Good to have one there. Hate to see a short and fire under the hood
I'm looking at new battery terminals that will have mini ANL ports much like my distro block in the back. I'll be having the new terminals custom machined to fit my exact needs. These street wires terminals are nice and all but really a dime a dozen in my world.
My MPG got a bump of two when I first put the additional wire on. That changes with 150 lbs of stereo gear installed and all that fiberglass is the trunk. My last road trip netted me 42.735 MPG. Not bad for not being a hypermiler IMHO.
My MPG got a bump of two when I first put the additional wire on. That changes with 150 lbs of stereo gear installed and all that fiberglass is the trunk. My last road trip netted me 42.735 MPG. Not bad for not being a hypermiler IMHO.
ah nice, i'm still stock right now. Someday ill upgrade the terminals but its working for now. No dimming on my lights now. Love it!🤘Originally Posted by sqcomp ↑I'm looking at new battery terminals that will have mini ANL ports much like my distro block in the back. I'll be having the new terminals custom machined to fit my exact needs. These street wires terminals are nice and all but really a dime a dozen in my world.
IMHO.