Yarisworld Archive

Big 3 Upgrade: Planning Stage (Input Encouraged)

145 posts · 40,685 views · page 2 of 3

Replies continued

sqcompBack at home · Oct 13, 2009#51
I just received a whole pricing list from Iraggi:

"Direct bolt on. Same housing as factory.
160 $379
180 $399

Iraggi modded alt. We modify mounting ears to have the same mtg points as factory. Will bolt up almost exactly like factory. This is the one everyone has been doing.

200 $459
220 $479
240 $499
260 $519
280 $539
300 $559"

...Personally, I might look at that 180 Ampere stock housing unit. I am not going to jump for a bigger housing until I see someone that has had success with one that they've purchased. If I see that, I'd probably order the 240 Ampere version for my uses.

With all that being said, Arch...you're going to be posting pictures on the piece and the install correct?
The ArchitectThread starterFL · Oct 13, 2009#52
i wont be doing the install seeing as how I'm not that confident, Id rather let someone certified and so forth have at it.

I will however post pics of the HO alt and the stock alt side by side
talnlnkySpokane, Wa · Oct 13, 2009#53
prices for HO alts is one of the great benefits of going with a high efficiency install with tiny speakers..... less power = exponentially less money spent.

If I had the money... oh yeah... i'd go for the 160amp in an instant... I LOVED my 160amp alt I had made for my mazda (not iraggi)... thing was great for jump starting cars & trucks.
The ArchitectThread starterFL · Oct 13, 2009#54
just got off the phone with iraggi.

the larger case alt should (99%) fit fine and it also looks like doing the alt swap myself will be easy enough although im sure im going to have to devote a day to it.

if you go the 1 5/8" pulley route for higher amps at idle you will probably have to get a special belt for it like I am.

every possible angle has been looked over since I've been scarred by DC power and their absolutely horrible customer service etc etc.

it should ship tomorrow ready to go.
The ArchitectThread starterFL · Oct 13, 2009#55
few teaser pics.

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy
SlickHouston, Texas · Oct 13, 2009#56
AHHHH SKEEET SKEET :)
goku87AK · Oct 13, 2009#57
Originally Posted by Slick ↑
AHHHH SKEEET SKEET :)
plz dont. might cause slippage on the pully.
The ArchitectThread starterFL · Oct 13, 2009#58
on a lighter note i think my amp stopped working along with the cap that ill be ditching anyways
sqcompBack at home · Oct 14, 2009#59
We're looking at the stock vs the Iraggi alternator?
The ArchitectThread starterFL · Oct 14, 2009#60
yea
goku87AK · Oct 14, 2009#61
stick it in already!!!
The ArchitectThread starterFL · Oct 14, 2009#62
those pics arent ones i took, those were sent from iraggi to me to show comparison.

it was suppose to ship today but i didnt get an email saying that so idk.
goku87AK · Oct 14, 2009#63
UGH!!!

The suspense = annoying lol
sqcompBack at home · Oct 15, 2009#64
I'm very interested to see actual fitment and this issues (if any) with that fitment. Which rating of alternator did you get again?
The ArchitectThread starterFL · Oct 15, 2009#65
300A, The mounting points will be the same (supposedly) but the actual casing will be .5" larger (1/4" each side) in diameter in some areas.

With eyeballing and minor measuring I did it should fit okay.
The ArchitectThread starterFL · Oct 15, 2009#66
" All finished last nite. Shipping out this afternoon.
If this one doesnt work for some reason we will figure out what needs to be done so it does work. Whether it be a different housing or making some mods to existing one.

Thanks, It has been a pleasure.

Dom "





sometime next week we'll see
sqcompBack at home · Oct 15, 2009#67
looks like good customer support...

The interest is increasing on my side. I could sure use a 240 Ampere alternator for my setup. Well...I'm subscribed to this one, let's see what happens.
SlickHouston, Texas · Oct 15, 2009#68
Yes, the excitement is killing me. Oh the potential. (goes into wet dream)...
The ArchitectThread starterFL · Oct 15, 2009#69
customer support is amazing with this guy.

After reading the yaris repair manual that's on yw around here somewhere I'm pretty confident I can do the swap myself and save a load of money. It shows for the most part how to remove the alt and the belt.
sqcompBack at home · Oct 16, 2009#70
Yeah, I have that part downloaded, printed and am queing it to do the replacement at the shop after I see how your experience turns out.

...No pressure...
talnlnkySpokane, Wa · Oct 16, 2009#71
yeah.... toyota put the alt in a NICE place..... my mazda hid it below the engine... and without a shop style jack/lift it would've been near impossible to get out without removing the engine.
The ArchitectThread starterFL · Oct 16, 2009#72
just got the tracking and he sent it 2 day air which is awesome.

on the other hand getting my money back from DC Power is turning out to be a huge pain in the ass.

They got the alt back a week ago and the owner (robbie) just seems to never be able to talk or call me back or he happens to be out doing everything but handling business.

the other only guy (dave) that works there who I actually got a hold of today has a slight attitude when it comes to my order because apparently they think they can do no wrong and the Toyota Diagnostic Tech must have been stupid or something.

Dave said "yea youre the one who the toyota tech wouldnt install the alternator" when its more like he couldnt because it was just plain wrong.

So now Im waiting til monday to hear back from robbie which is a joke.....seriously fk these guys
sqcompBack at home · Oct 17, 2009#73
Come on man! Get this already! :)
The ArchitectThread starterFL · Oct 17, 2009#74
i figure itll get it tuesday or wednesday and Ill install it saturday which is the only time i can do anything.

It's freezing up here in CT right now so ill be traveling to a place in Long island where theres a small garage ill heat that ill be using.
The ArchitectThread starterFL · Oct 20, 2009#75
here come the pics, I received it today. Also included is my super duper volt meter from hong kong.




Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy



Picture not included in this copy

Picture not included in this copy

Picture not included in this copy
SlickHouston, Texas · Oct 21, 2009#76
OOOOHHHH, I feel all tingly on the inside :) Good luck with the install man
sqcompBack at home · Oct 22, 2009#77
Well...the dimensions are a little different. I'm wondering how the fit is going to go. Did Iraggi put an overdrive pulley on that?

Saturday is when this happens? Well my friend...I can say that you have someone 7000 miles away that is pulling for this to be a smooth install and great operation. ...If it is for you, I'll go ahead and throw down the coin for a slightly smaller Ampere one from him as well.

You have all of his contact information?
The ArchitectThread starterFL · Oct 22, 2009#78
by all small tests and eyeballing and measuring it should fit.

It is in fact an overdrive pulley. The usual size they send is 2" as opposed to this 1 5/8"

DC power is talking so much sh*t about iraggi and how hes a crook and theres thousands of things on google about him etc etc.

Then got to saying actual bad things about the alt and how itll never do 300amps and also how it'll shred the belt because of whatever and it wont be able to drive the alternator physically...

Idk i guess alternator makers are at each others throat but the customer service at DC sucks complete ass. Robbie said he tried calling em a few times but i got no missed calls and my phone is glued to my hand.

I had to call him at his cell to get a hold of him and i bet he didnt expect that.

Lastly, Robbie of DC said he had a rep that has a yaris (oh yea now hes got a yaris...k) and he's going to make a perfect fit alt etc etc and take pics of it working etc...

If that happens...fine ill take it and ill let someone of yw have the perfect fit HO alt.
sqcompBack at home · Oct 23, 2009#79
Ummm...

It won't be me. I'm not playing around with DC. It seems they've given you a bad time, so they don't get my business.

Have you opened up the hood yet to see how the new alty will fit?
The ArchitectThread starterFL · Oct 23, 2009#80
holding it in the engine bay proves to be no good seeing as how that proved to be useless when it came to the DC alt although by all measurements and intensive engine bay eyeballing ti looks good, we shall see.
drew113087Concord · Oct 24, 2009#81
Originally Posted by sqcomp ↑
...and yes, I will re-do the engine compartment grounds after I get home from Iraq. I need to make ready for IASCA...

Every little improvement will help. That includes techflexing and putting heat shrink around the terminations of the grounds. They look amateur now. I already purchased a nice little billet aluminum battery clamp thingy from Micro Image. I'm thinking some billet brass connectors for some kinetik batteries soon...

I can do much better than these grounds I have on there now, show-wise at least.

As was mentioned I did NOT remove stock grounds, I only added. Besides, the power flows on the path of least resistance.
I Feel you man just came back from a mission to VBC earlier today (ps breakfast is waybetter over there) Adding a few grounding cables to boost the mpg... I just might do that too when i get back to the states.
sqcompBack at home · Oct 24, 2009#82
While we're waiting for install pictures...

Tell me more Drew. You in the dust bowl too? What unit are you with? Which DFAC did you go to?

I actually had an increase of right around 2 mpg on my Yaris with a $13 big three upgrade. Okay, $13 is the insider price but still, all I spent was $13 on the compression fittings for my little ride. I'll be replacing the engine compartment 4 gauge runds with 1/0 gauge runs techflexed, that have the nice compression fittings as well. I may do this on R&R this December when I'm finishing up the deadening on my car. Hopefully I'll have the time to drop the headliner when I'm finishing the back doors, back deck, and the trunk. I've already put 3 bulk packs into the floorpan, back seat, and the front doors. I'll probably be looking at another three bulk packs for the rest. This car is already "quieter than an AMG Merc" according to the shop owner. Yeah!
The ArchitectThread starterFL · Oct 24, 2009#83
heres how it went

i installed the HO alt and it fit 99% right which will be resolved in the future but the alt fits plenty well to work for everyday use. This is the best news of all

here are the problems that occurred

-- The car threw a P/S light
-- It would not shift out of park
-- The HVAC console would not work or light up
-- It was charging at 12.2ish volts

at first impression it sucked.

once i removed the alt and inspected i saw that one of the four wires of the black connector that i had to extend had come loose (the green one).

I reattached the green wires and retested it all only to have the same problems.

I was talking to iraggi through the process here and there.

I then put the backup stock alt i ordered (not my stock one) on and got it all together then i still had the same problems.

I should at this point say that in my idiocy i didnt during any of these install attempts attach the factory 8gauge or so alt to batt wire and just used my run of 0/1 cable.

When i put in the backup stock alt i reconnected the oem alt to batt wire (never tried this alt configuration without it) and i had also fully disconnected the battery from the vehicle for probably 25 minutes so as to clear any codes and reset the ecu.

when i came back and put everything back together and tested it it all worked 100% no problems.

So this just leads me to believe that if i now swap the HO alt for this alt it SHOULD work just fine so long as all wires stay fully connected and nothing comes loose.

Idk when ill be trying the swap it again seeing as how its hard to get a day of free time but ill try to shove it in somewhere.

anyways....at least for now im charging at 14.2volts again.
sqcompBack at home · Oct 25, 2009#84
hmmm...

I'm wondering if the stock body 180 Ampere model is the way to go then...
The ArchitectThread starterFL · Oct 25, 2009#85
it was a learning experience for sure, in retrospect knowing what i know now i think it couldve been much easier.

the slightly larger case version fits...thats all there is to it. The only thing that has to be done is extending the black connector which is easy

im just going to swap it back in sometime in the near future and be 110% on every single move i make and if any of the same problems are still there then ok maybe the stock case is the way to go.
SlickHouston, Texas · Oct 25, 2009#86
Hmmm, im only slightly less excited than I was before, but overall im super excited for the final product. :) Thanks again for being the G-pig. :)
sqcompBack at home · Oct 25, 2009#87
Just so I don't become confused...

This Iraggi alternator does NOT work as you hoped?
The ArchitectThread starterFL · Oct 25, 2009#88
i can understand why youre confused, ill try to make the event as easy to understand as possible. it's not fair to say that it didnt work because well...just read on

heres how it occurred in steps.


1) I installed the iraggi alt and extended the black connector so it fit on the new alt.

2) I extended the connector and attached it to the alternator before installing because this is necessary.

3) I did not know it at the time but the green wire of the extended connector had come loose during the install and i believe this caused the p/s light and hvac loss.

4) I also did not reattach the OEM Alternator to Battery wiring because at the time i didnt think them to be of importance because I was using my own 01/ run. I forgot that the OEM wiring went into a junction box that attached to the batt....its important

5) The ECU was remembering the P/S code from the clipped green wire every time i tried a new test and i also continuously did not use OEM wiring.

6) I stopped trying with the HO alt and just wanted to see if the car would work fine with the stock backup OEM alt that i had ordered. I installed that OEM and the same problems that I had with the HO alt were happening with this alt.

7)I uninstalled the stock alt. because i was having the same problems and called iraggi and got tips.

8) At that time i could no longer afford to put anymore time into this project so i installed the backup OEM Alternator i ordered just in case (not my stock one) And i reattached the OEM wiring ALONG with my 0/1 run AND I fully disconnected the battery from the vehicle for 25 minutes and let the ECU reset.

9)Everything then worked perfectly..no codes and i was charging at 14.2


If this made sense to you then in theory the HO alt should work if i were to swap it out right now, this is what i think and i consulted iraggi about it all as well.
sqcompBack at home · Oct 26, 2009#89
Okay, so you're going to re-install the Iraggi alty sometime soon?

I'll be watching closely, I can tell you that much.
The ArchitectThread starterFL · Oct 26, 2009#90
yea ill get it reinstalled as soon as ive got some time.
SlickHouston, Texas · Oct 26, 2009#91
I have lots of time :) Want some of mine? Lol. At least the problem is theoretically solved. Good luck with the reinstall. I check this thread every 4 or 5 hours lol
The ArchitectThread starterFL · Nov 2, 2009#92
Got the alt put in yesterday finally. It works so far at least as well as the OEM.

I need to get a clamp meter and load test it. It charges at 13.8 - 14.2/3 like the stock alt which was expected

Had to extend the OEM Alt to Batt probably 8 inches and same goes for that black connector but no biggy.

Took me about 3 hours from start to finish.

heres a couple crappy phone pics until i use my camera later today.

Picture not included in this copy

Picture not included in this copy
SlickHouston, Texas · Nov 2, 2009#93
Hurray!!! She is a success :) :holds breath for load test: Looks like it fits perfectly. As good as stock? No rubbing issues anywhere? Just extend the wires and them good to go? Very nice man, very nice.
talnlnkySpokane, Wa · Nov 2, 2009#94
a very unscientific method of testing the new alt would be to put a sine wave cd in there.... play something like a 50hz tone at moderate volume (doesn't have to be full blast), and while you do that.... have a DMM set to voltage monitor the voltage drop...

on the stock alt... if you push more than 500rms you should start to see a decent voltage drop... on the new alt.. since it's about 4 times bigger... should take more like 1200-1500rms to see the same drop...

Keep in mind... the alt may take a half second to respond to the new load.


Clamp meter is scientific tho... I would love to own a clamp meter.
Clamp + DMM and you can tell how much power your alt puts out (in watts). Add and Oscope and you can tell how much power your amp puts out before clipping.
The ArchitectThread starterFL · Nov 2, 2009#95
yea im going to have to find someone to help me do the volt test because i dont have an internal volt meter yet, 2 are on the way.

And to slick, the install is really quite easy and the fitment was very good. Extend the OEM wire 10 inches to be safe and the black connector the same and youre good to go.

Before I was dropping about .3 volt when it was hitting pretty good, there was a nice rumble throughout the seat and headrest and the visors were flapping a little bit. it would go from 14.3-14.07 or 13.99 for example

There are no retail stores that have a Clamp that measures DC Amps so I have to resort to online shopping or find a shop



Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy
The ArchitectThread starterFL · Nov 2, 2009#96
i found a pretty decent clamp meter rated for 400A DC Current on the cheaps and will be ordering it tonight. Once i get it ill do full on test for this alt.
awdblazerwinnipeg · Nov 2, 2009#97
get a good quality clamp on, actually dont get cheap shit when it comes to meters, trust me i am a electrician and the better the meter you have the safer you are and cheap meters are exactly that cheap and not accurate
The ArchitectThread starterFL · Nov 2, 2009#98
the meter itself isnt cheap but the price i found was. i showed iraggi and he signed off on it and its rated for what i need etc etc. We'll see if this alt is all it needs to be
awdblazerwinnipeg · Nov 3, 2009#99
only two names i would ever touch, fluke and amp probe
talnlnkySpokane, Wa · Nov 3, 2009#100
Originally Posted by awdblazer ↑
only two names i would ever touch, fluke and amp probe
doesn't fluke rebadge a lot of its meters for other companies tho???