Yarisworld Archive

Crashy Lives

357 posts · 160,819 views · page 1 of 8

CTScottOriginal postUSA, CT · Aug 23, 2009#1
Picture not included in this copy

After a bit of suspension reshaping on my ebay wreck with a 12 ton bottle jack, I was able to actually drive Crashy (as my kids have come to call it). The front wheels now point in the same direction, instead of out in opposite directions. The right side lower suspension arm and tie rod end were bent rearward over three inches. I was able to bend it back with the 12 ton jack, after popping the seal on a 4 ton one. Last week, when I first fired it up the automatic transmission was leaking. With that I found that I hadn't fully seated the left drive axle. After popping it in fully the AT hasn't leaked a drop.

Today I drove it around the yard to check out the AT, and it seems to be perfectly fine. I originally planned to pull the engine and transmission, but now that I have a fully mobile test platform, I think I'll leave engine in. With the windows and doors off, it's fun to drive. The roof is coming off next.

Below is a short video of it in motion.

Picture not included in this copy

Replies 356

QmobileHoytville, ohio · Aug 23, 2009#2
kinda reminds me a Wrangler with the doors off and all
MGarganoNJ · Aug 23, 2009#3
Three cheers for Crashy for its invaluable contribution to the SRS project and all those I'm sure will follow!
CTScottThread starterUSA, CT · Aug 23, 2009#4
Originally Posted by Qmobile ↑
kinda reminds me a Wrangler with the doors off and all
It definitely has the jeep feel.
QmobileHoytville, ohio · Aug 23, 2009#5
hmm Yaris turned dune buggy?? just a idea
eTiMaGoBangkok, Thailand · Aug 23, 2009#6
and one can fully admire the Yaris's stock comfortable and high seating position 😉
CtrlAltDefeatIndianapolis IN · Aug 24, 2009#7
Toyota Yaris: Takes a lickin' and keeps on tickin'! 😁
Yaris HiltonBristol, Tennessee, USA · Aug 24, 2009#8
Back in the days of cars with frames under them it was quite popular to make a "cut-down" out of a wrecked car.

In the '80s I gave some thought to trying that with a burned Jaguar XJ-S V12.

Taking the roof off will make this unibody pretty flexy, I think.
supmetSouthern California · Aug 24, 2009#9
🙇🙇🙇🙇🙇🙇🙇🙇
kuyachris84Illinois · Aug 24, 2009#10
omg .. that's crazy haha
cali yarisCanoga Park, CA · Aug 24, 2009#11
totally cool - what IS the plan for Crashy?
tk-421Dagobah · Aug 24, 2009#12
Crashy FTW
SilverBackEl Monte, Ca · Aug 24, 2009#13
That's too awesome! It's the Frankenstein of YW 🙇

BTW, what it look like when you first got it?
LorenSafety Harbor, FL · Aug 24, 2009#14
That's TOO cool! I want one!

Dont' cut the roof just yet. As mentioned above, the car WILL bend in the middle after you cut the roof. So, before you do it, better weld in some sort of a support hoop, or at least weld in some door supports.
tomatoSan Francisco Bay Area · Aug 24, 2009#15
Originally Posted by supmet ↑
🙇🙇🙇🙇🙇🙇🙇🙇
+1 🤘
👍
cali yarisCanoga Park, CA · Aug 24, 2009#16
Crashy needs a sticky thread! Long live Crashy!!
Bob Dogthe Boondocks, NC · Aug 24, 2009#17
I was going to say something, but I'm kind of a let the other person do what he wants and see what happens. I too would leave the roof on for structural reasons or at least weld some serious side bars on it
AltitudeColorado · Aug 24, 2009#18
Yup roll cage in lieu of roof. And I agree this needs to be stickied so we can all follow Crashy's progress.

That video reminds me of the moon buggy!
SailDesign. · Aug 24, 2009#19
Def the roll cage, roof or not. Then - make a rallycross special from it. No paint required, coz you'll only lose it again! 🙂
There's a pretty active RallyX scene around this area.
CTScottThread starterUSA, CT · Aug 24, 2009#20
Originally Posted by k r a y z e e . j o j o ↑
That's too awesome! It's the Frankenstein of YW 🙇

BTW, what it look like when you first got it?
This is what she looked like when I arrived to pick her up.
Picture not included in this copy

Here is the original thread about the ebay auction. It has more pics of the disassembly I've done thus far. I figured it was time for her to have her own thread...

who won this ebay car?! username 9***z
CTScottThread starterUSA, CT · Aug 24, 2009#21
I'm definitely thinking roll cage when I clip the roof. I am torn between crazy go-cart and utility vehicle. I am seriously toying with the idea of adapting the frame for a 6 foot blade tractor snow plow to her for plowing my driveway. Right now I plow with a 1972 10 HP Wheel Horse tractor. I could mount the hydraulic pump where the AC compressor was and drive it off of the serpentine belt and also beef up the under carriage.

The frame actually seems to be straight. All of the damage went to the right front suspension. The lower suspension arm, front stabilizer bar, and the tie rod end were all bent on that side. The axle on that side also has a bit of a bow to it (it just misses scraping by about 1/4"). If I was going to drive it at any significant speed, I'd really want to replace those parts.
SilverBackEl Monte, Ca · Aug 24, 2009#22
Oh yeah, I remember that car now. Man what a mess

Snow plow? 😆

I've never lived in a snowy climate, but wouldn't it cause the underside to rust even more?
CTScottThread starterUSA, CT · Aug 24, 2009#23
Originally Posted by k r a y z e e . j o j o ↑
Oh yeah, I remember that car now. Man what a mess

Snow plow? 😆

I've never lived in a snowy climate, but wouldn't it cause the underside to rust even more?
No more than driving on snowy roads. The underside is actually pristine at this point. All of the rust is on non-coated parts and parts that had their paint scraped off.
Kaotic LazagnaCentral Valley, CA · Aug 24, 2009#24
Wow, that's cool.
tomatoSan Francisco Bay Area · Aug 24, 2009#25
Originally Posted by CTScott ↑
I figured it was time for her to have her own thread...
Indeed, and a name!

bump
Sodium DuckWestern Mass. · Aug 24, 2009#26
Subscribed!
red_rimsCA · Aug 24, 2009#27
the yaris lives on.
toastNappanee, IN · Aug 24, 2009#28
I'd love to turn that into a wicked r/c project......
CTScottThread starterUSA, CT · Aug 24, 2009#29
Originally Posted by PK198105 ↑
hey i just got a crazy idea, how bout , when you cage it make a micro pickup truck out of it. bang in the rear panels , get some 22' wheels or something that will let you turn without rubbing the engine (lol) get a collapsible windshield and you're done
That's kind of what I'm thinking (but sticking with the 15's and putting some ATV type tires on (like Swamp Foxes). I put a set of them on my tractor last year and found that they were the first tires that I have ever been able to plow with, without needing chains.

Picture not included in this copy
fmicleSan Jose, CA, USA · Aug 24, 2009#30
🤣🤣🤣🤣
Now that's I would call "Yaris lite".
👍
Betriventedmonton · Aug 24, 2009#31
This is so awesome/funny/kudos inducing.
advocatelocation · Aug 24, 2009#32
19s + in the back for sure imo, roll cage, and the snow plow. then i'm going to drive to the other coast to see it in person.
AltitudeColorado · Sep 2, 2009#33
...I'd wear a 'Crashy' Yaris tee-shirt. Maybe - Project Crashy or Crashy Lives. I dunno, I just want a tee-shirt. 😁
CTScottThread starterUSA, CT · Sep 2, 2009#34
I found a nice snow plow for her on Craigslist. It's a 7' SnowBear that should be easy to weld up a mounting frame for. It's a light duty plow that weighs a lot less than many that I've looked at. I am going to go check it out an probably pick it up tomorrow.

Picture not included in this copy
Sodium DuckWestern Mass. · Sep 2, 2009#35
Is that one of those fiberglass plows?
PETERPOOPOahu · Sep 2, 2009#36
wow
cali yarisCanoga Park, CA · Sep 2, 2009#37
^ +1 !!!

you probably need some bags of concrete or a person in the back to counterweight that... LOL.

this is the COOLEST yaris project EVER
cali yarisCanoga Park, CA · Sep 2, 2009#38
...I'd wear a 'Crashy' Yaris tee-shirt. Maybe - Project Crashy or Crashy Lives. I dunno, I just want a tee-shirt.
+1 !!!!!
CTScottThread starterUSA, CT · Sep 2, 2009#39
Originally Posted by Sodium Duck ↑
Is that one of those fiberglass plows?
Unfortunately not. It's steel, but not as hefty of steel as the pro-grade Meyers, etc. plows.
lilredrocketDFW, Texas · Sep 2, 2009#40
When I lived in Kansas I saw a lot of truck startusing plexi-glass if you wanted to save some weight cut the steel out and rivit in some plexi. But on the other hand since this is front wheel drive you may want the steel there to help the front tires grip a little better
yarr_isWest LA · Sep 3, 2009#41
lol nice one
advocatelocation · Sep 3, 2009#42
I love this thread more and more every time I read it.
CTScottThread starterUSA, CT · Sep 3, 2009#43
I'm picking up the SnowBear plow tomorrow morning. I am also getting a SnoWay polycarbonate plow blade for free from a buddy who works for a dealership. They took in a pathfinder that had the plow and when they sent it off to auction, the blade was in the way for loading it, so they popped it off.
TinyGiantRochester, NH · Sep 3, 2009#44
Originally Posted by Altitude ↑
...I'd wear a 'Crashy' Yaris tee-shirt. Maybe - Project Crashy or Crashy Lives. I dunno, I just want a tee-shirt. 😁
lol do i hear a printing job?!
tomatoSan Francisco Bay Area · Sep 3, 2009#45
^ I think so, lol!

Yah, this is the feel-good thread of the forum, and we're all rooting for Crashy! 🙂

Good luck with your project, man.
TinyGiantRochester, NH · Sep 3, 2009#46
definitely sounds like a great project wish i had the space/money/time to mess with something like this. can't wait to see the outcome!
yarisugiハワイ · Sep 3, 2009#47
That video is hilarious! Please please do drive it around your neighborhood! If the cops stop you, just tell them you've just been in a really bad accident and all you wanna do right now is get home and be with your family.
Bob Dogthe Boondocks, NC · Sep 3, 2009#48
one for the front, one for the back
QmobileHoytville, ohio · Sep 4, 2009#49
*grabs popcorn* I now am even MORE interested on the progress of this project
tomatoSan Francisco Bay Area · Sep 4, 2009#50
OK, I just had a crazy idea: you should enter Crashy in the Yaris Of The Month contest!!

I know I would definitely vote for her!! 😁