Looks like you need some spacers on the rear :)
Crashy Lives
357 posts · 160,819 views · page 3 of 8
Replies continued
lol. Actually on those loop things at the lower rear of the wheel well. They almost look like two hooks.Originally Posted by supmet ↑On what? The fuse box?? 🤣
Stereo and heat still work. I just have rear speakers since the doors are gone.Originally Posted by Sodium Duck ↑Supercharger kit next...lol
Does the stereo still work? I notice the speakers are still in it.
If I space the rears, I'll need to flare or cut the fenders. As of now the tires actually tuck without rubbing in the rear. I may lift it about 2" in the front in rear, and if I do then I can space the rear.Originally Posted by *MAD DOG* ↑Looks like you need some spacers on the rear :)
If you want a some free "Crashy" vinyl decals, I cut vinyl and will make you some.
What do you mean by table?Originally Posted by PK198105 ↑are you going to straighten the right side table or you just gonna leave it as is?
I replaced it and the bent axle this past weekend. There are a couple of pics a page or so back of the bent ones next to the junk yard ones that I replaced them with. Now, I am just waiting for the brake pins for that side (that the caliper slides on). They were severely bent as well.Originally Posted by PK198105 ↑the mounting point for the suspension components on the right side , the part that is pushed up.
I want tires like that for the winter time
Since they'll fit on a normal Yaris, I might have to give them a try on my road worthy Yaris when we get a decent snow.Originally Posted by hatchbackkid82 ↑I want tires like that for the winter time
They are mode of a super soft and sticky compound. I have a feeling that they'll be very good on ice. The swampfox tires that I was originally trying to use are very similar and they were excellent on ice last year (with my tractor that is).
Speaking of deflating - They are rated to be run at 12psi (with a max of 36psi). I have them at 20 now, because they really squish at 12.
Speaking of deflating - They are rated to be run at 12psi (with a max of 36psi). I have them at 20 now, because they really squish at 12.
Are the tires DOT approved? I feel like they'd wear down really fast, given that they have a lot more weight on them than they usually would, and being used on pavement. That would be really sweet to roll on though.
Wow those tires look so badass.
this, I wanna see! 😁 Pics please!Originally Posted by CTScott ↑Since they'll fit on a normal Yaris, I might have to give them a try on my road worthy Yaris when we get a decent snow.
They are labeled as NHS (which means non-highway service). I think the manufacturer rates them at 50 MPH max. They definitely wouldn't be something you'd want to use as daily run tires, but they might be a blast to throw on to cruise the empty streets after a good storm.Originally Posted by Sodium Duck ↑Are the tires DOT approved? I feel like they'd wear down really fast, given that they have a lot more weight on them than they usually would, and being used on pavement. That would be really sweet to roll on though.
I'd throw them on there just like that, rubbing on the bumpers? i don't need no stinkin' bumpers😁 how much was each tire?
Originally Posted by CTScott ↑Since they'll fit on a normal Yaris, I might have to give them a try on my road worthy Yaris when we get a decent snow.
$107 each with free shipping (motoxmall.com).
If I could have squeezed 12" rims on, then I could have gotten tires for about $60 each. 15" rims are not very common an ATV's at this point, so there's a premium for the couple of tires made in that size. I looked into truck tires, but couldn't find anything aggressive that would even come close to fitting.
If I could have squeezed 12" rims on, then I could have gotten tires for about $60 each. 15" rims are not very common an ATV's at this point, so there's a premium for the couple of tires made in that size. I looked into truck tires, but couldn't find anything aggressive that would even come close to fitting.
must...have...more...crashy...updates...
+1Originally Posted by ern-diz ↑must...have...more...crashy...updates...
give him some time to get the work done! 😁
LOL. Now that the suspension, axle, and brake fixes are done, I just need to figure out my material list for the roll cage and plow frame. I've had a couple of house projects that I've been working on the past couple weekends, so my Crashy time has been limited. This weekend I'll wrap up the last of my drywall work and hopefully next weekend I'll be welding. Crashy work is definitely way more fun than hanging and taping drywall.
Stay tuned...
Stay tuned...
Performing surgery blindfolded with shaking hands on your own hemorrhoids is more fun than hanging and taping drywall!Originally Posted by CTScott ↑LOL. Now that the suspension, axle, and brake fixes are done, I just need to figure out my material list for the roll cage and plow frame. I've had a couple of house projects that I've been working on the past couple weekends, so my Crashy time has been limited. This weekend I'll wrap up the last of my drywall work and hopefully next weekend I'll be welding. Crashy work is definitely way more fun than hanging and taping drywall.
Stay tuned...
CT cut the roof and make a roll care with an x support in the rear , ditch the quarter panels and get wider tires, go-kart from hell+500
hanging and taping drywall => fine, annoying film of dust all over the place for months to come ! 😉
CTScott,
I hope you realize that when Crashy's rebirth is complete, you'll have to go on a world tour to showcase your talents and Crashy's new style. 😁
S.R.
I hope you realize that when Crashy's rebirth is complete, you'll have to go on a world tour to showcase your talents and Crashy's new style. 😁
S.R.
must...have...more...crashy...updates...Originally Posted by ern-diz ↑must...have...more...crashy...updates...
Very soon. Drywall work is done. Have to lay 200 sq ft of pavers this weekend, then it's back to Crashy. I've been doing some serious landscaping work around my place lately and it has me thinking that Crashy needs a dump bed.Originally Posted by ern-diz ↑must...have...more...crashy...updates...
👍Originally Posted by CTScott ↑Very soon. Drywall work is done. Have to lay 200 sq ft of pavers this weekend, then it's back to Crashy. I've been doing some serious landscaping work around my place lately and it has me thinking that Crashy needs a dump bed.
http://www.kmart.com/shc/s/p_10151_1...0070926x00003a
Wonder if you could hack that up and weld the frame into the rear. 80 bucks, but only like 20"X40"X10". Unless you want hydraulics (which you should lol).
Wonder if you could hack that up and weld the frame into the rear. 80 bucks, but only like 20"X40"X10". Unless you want hydraulics (which you should lol).
I Crashy.....
It's the right idea, but I would like it to be as big as possible. 40" x 60" would fit between the wheel wells and from behind the front seats to the rear bumper. Plastic would be a big plus for keeping the weight down.Originally Posted by Sodium Duck ↑http://www.kmart.com/shc/s/p_10151_1...0070926x00003a
Wonder if you could hack that up and weld the frame into the rear. 80 bucks, but only like 20"X40"X10". Unless you want hydraulics (which you should lol).
Definitely need hydraulic dumping, even if it is manually pumped (i.e. $20 bottle jack).
+1Originally Posted by auxmike ↑I Crashy.....
...so goodbye roof? Or would it not need to be raised that high?Originally Posted by CTScott ↑It's the right idea, but I would like it to be as big as possible. 40" x 60" would fit between the wheel wells and from behind the front seats to the rear bumper. Plastic would be a big plus for keeping the weight down.
Definitely need hydraulic dumping, even if it is manually pumped (i.e. $20 bottle jack).
Roof's definitely getting clipped off. The outer pipes of the roll cage will follow the original lines from the bottom of the A pillars to the bottom of the C pillars. Cross pipes will go across the top of the non-existent windshield and in place of the B pillars. I want to keep the shape of the Yaris, but if I leave off the rear cross at the top of the hatch, I'll have plenty of clearance for the dump bed to lift.Originally Posted by Sodium Duck ↑...so goodbye roof? Or would it not need to be raised that high?
I figure I can put a bimini top between the windshield bar and the B pillar bar to keep me dry if I'm plowing while it's raining or snowing.
Any crashy updates, pics?
No new pics, but I ordered my steel on Friday for the plow frame, roll cage, and brush guard. Next weekend is going to be a serious welding weekend.Originally Posted by *MAD DOG* ↑Any crashy updates, pics?
radical
don't get a welding sunburn! good luck :)Originally Posted by CTScott ↑No new pics, but I ordered my steel on Friday for the plow frame, roll cage, and brush guard. Next weekend is going to be a serious welding weekend.
I learned my lesson on that one. When i built my trailer I made the mistake of wearing a tshirt and welding gloves while stick welding 1/4 steel at 200 Amps. I ended up glowing red from 4" below my elbow to 4" above.Originally Posted by Morgan ↑don't get a welding sunburn! good luck :)
Right on!! We all wish we could be there to watch you work on Crashy 🙂Originally Posted by CTScott ↑No new pics, but I ordered my steel on Friday for the plow frame, roll cage, and brush guard. Next weekend is going to be a serious welding weekend.
Be careful!
wow, you can really get "sunburned" from a welding torch? I didn't know that!
Well technically your not being burned by the sun, it's the white flame that's doing the damage.Originally Posted by cali yaris ↑wow, you can really get "sunburned" from a welding torch? I didn't know that!
And, it's actually UV generated from the arc that burns your skin, like the sun or a tanning booth.Originally Posted by *MAD DOG* ↑Well technically your not being burned by the sun, it's the white flame that's doing the damage.
I picked up a load of steel today - 2" square tubing for the plow frame and SAE 4130 1.500 x.095 tubing for the roll cage. It's going to be a weekend of molten metal for Crashy.
don't for get the Pic's
hey and you could always send photos to toyota , maybe they could use it
for next years SEMA show lol 👍
hey and you could always send photos to toyota , maybe they could use it
for next years SEMA show lol 👍
Hmmm. I think I'm low on pink paint though.Originally Posted by 1NZYaris1 ↑don't for get the Pic's
hey and you could always send photos to toyota , maybe they could use it
for next years SEMA show lol 👍
🤣👏Originally Posted by CTScott ↑Hmmm. I think I'm low on pink paint though.
Naw, man, don't do that to Crashy!! 😲
Crashy Update: Plow Frame is done!
I was hoping to get more welding done this weekend, but I ended up wasting a ton of time dealing with leaves. I think Crashy needs a turbo leaf vacuum next.
Here's Crashy playing in the leaves:
Picture not included in this copy
And, here's the plow frame. I welded it out of 2" x 2" x 3/16" box tubing. My plow mounts with two 1-1/2" round pins, so the mounting points are two pieces of 1-1/2" solid round bar. The next step is adding the brush guard and radiator support frame to it.
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
I was hoping to get more welding done this weekend, but I ended up wasting a ton of time dealing with leaves. I think Crashy needs a turbo leaf vacuum next.
Here's Crashy playing in the leaves:
Picture not included in this copy
And, here's the plow frame. I welded it out of 2" x 2" x 3/16" box tubing. My plow mounts with two 1-1/2" round pins, so the mounting points are two pieces of 1-1/2" solid round bar. The next step is adding the brush guard and radiator support frame to it.
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
4 attachments not included in this copy
starting to look like a beast.. needs to be painted flat black now :)
attach a leaf hose to the excaust , 😁