and i bought a snowblower.
Crashy Lives
357 posts · 160,819 views · page 6 of 8
Replies continued
Let's see Crashy get you out of this one, bub !
all together ..... go crashy go crashy goooo crashy
The snow is finally falling here! I just swapped Crashy and non-Crashy's positions in the garage, so she's ready to go.
this time if you make a video, The Ride Of The Valkyries should be the soundtrack
😁
cool!
cool!
Hmmm. Ride Of The Valkyries at the start, and then Benny Hill theme for sped up portion, sounds like a total win.Originally Posted by 127.0.0.1 ↑this time if you make a video, The Ride Of The Valkyries should be the soundtrack
Can't wait........hurry!😆
Once again Crashy did a bang-up job of plowing! We ended up with 8" with drifts well over 12" deep. Below is the video, this time with a soundtrack:
http://www.youtube.com/watch?v=IYbRRZlWmdw
http://www.youtube.com/watch?v=IYbRRZlWmdw
hahaha!! the soundtrack makes all the difference!
Pretty funny !
Pretty funny !
Totally awesome...love the Benny Hill theme! Best part is when the Yaris disappears to only return with one long pass.
+1 its the music that does it. thats classic. lol
That's great, wish I had crashy here we had 20 inches of snow!
That was great!👏👍
Awesome. You may have mentioned this before, and I'm too lazy to re-read the thread, but does the heat still work?
It does. Even though I have no windows or doors, having heat blowing on me is awesome.Originally Posted by Altitude ↑Awesome. You may have mentioned this before, and I'm too lazy to re-read the thread, but does the heat still work?
CT, Crashy is amazing! I'm sure that plow came in real handy over the past couple days. It's cool to see what the mind can come up with when given the opportunity.
Crashy FTW
Crashy FTW
you my friend are a true genius aka McGyver .
oh and that sound track 🙇🙇🙇🙇🙇
oh and that sound track 🙇🙇🙇🙇🙇
wow, i havent been on this site in months, glad crashy is getting better lol
So, Crashy just plowed her 4th storm. I am still absolutely amazed as to how well she does. This morning there was a layer of ice under the snow, that was so slippery that I literally couldn't stand up. With her tires and the traction from the weight of the plow, she cleared the driveway without slipping or spinning at all. I went to run a quick errand (with my Xterra) after I plowed, and I had to put it in 4 wheel drive to get out of the driveway (and it has Nitto Terragrappler tires).
Nice article. 🎉Originally Posted by Thirty-Nine ↑FYI, Crashy has been featured on Subcompact Culture:
http://www.subcompactculture.com/200...as-crashy.html
Who wrote that article?
Nice!🙇
Nice!🙇
As it says down the bottom of the post Thirty-Nine wrote it and posted it at 3:35PM...............
ha..ha. Awesome.
👍
Wow, never thought to click on this thread. Glad I finally did. That thing is awesome!
🎉
🎉
I haven't posted any updates on Crashy in a while now. Thus far this winter she has plowed seven storms worth of snow. She also continues to be a valuable development platform.
Her latest task was to test implementation of a real JDM Vitz push-to-start switch, which Echo_hrs purchased via the yahoo Japan auctions and shipped to me, so I could figure out how to make it work for our Yaris.
Here's a video explaining how it works and demonstrating it working on Crashy:
http://www.youtube.com/watch?v=v6zinlD58Eg
Picture not included in this copy
Her latest task was to test implementation of a real JDM Vitz push-to-start switch, which Echo_hrs purchased via the yahoo Japan auctions and shipped to me, so I could figure out how to make it work for our Yaris.
Here's a video explaining how it works and demonstrating it working on Crashy:
http://www.youtube.com/watch?v=v6zinlD58Eg
Picture not included in this copy
I WANT.
so, basically this is a three wire hook-up?
Yes, from my interface it's just three wires and a ground to the car.Originally Posted by bobselectric ↑so, basically this is a three wire hook-up?
I...wow!! I want one now so badly...all bundled together w/ RS cluster, YarGauge, and JDM Start/Stop button.
Did Steve mention a possible group buy for us on here and MicroImage?
Did Steve mention a possible group buy for us on here and MicroImage?
I don't see why you guys get excited about this, but each to his own...
On MI we were discussing if the USDM switch used on the Camry and Avalon might be the same as the JDM Yaris one. The visible part looks identical, so I need to track down the EWD for either of them an compare it. The most difficult part to get would be the European LHD Yaris trim piece that the switch mounts to.Originally Posted by Kioshi ↑I...wow!! I want one now so badly...all bundled together w/ RS cluster, YarGauge, and JDM Start/Stop button.
Did Steve mention a possible group buy for us on here and MicroImage?
I know Steve and another member here found a hold to the right of the steering wheel on our cars in the shape of a sphere (somewhere below the compartment, to the right of it near steering wheel ...could we use that to mount the start/stop button possibly? I could dremel the holes size to make it bigger if need be~
I need to find the thread where it was posted on here, it was after the hack, so it's still active..
I need to find the thread where it was posted on here, it was after the hack, so it's still active..
Life would be pretty boring if we didn't :POriginally Posted by Yaris Hilton ↑I don't see why you guys get excited about this, but each to his own...
Originally Posted by Kioshi ↑I know Steve and another member here found a hold to the right of the steering wheel on our cars in the shape of a sphere (somewhere below the compartment, to the right of it near steering wheel ...could we use that to mount the start/stop button possibly? I could dremel the holes size to make it bigger if need be~
I need to find the thread where it was posted on here, it was after the hack, so it's still active..
Life would be pretty boring if we didn't :P
The hole is there under the small cover that is to the right of the steering column (where many of us have mounted our switches for our DIY cruise control). The inside hole is the correct size. The cover is what needs to have the hole to accept the switch. It would be possible to drill the correct sized hole to mount the switch, but the real cover for the European cars which have push-to-start, have a nice bevel molded in around the switch.
Oooohhh... I have a JDM switch I was thinking of selling, but I might just hang on to it now 🤤
Crashy just finished her 10th round of plowing. At this point the piles of snow off the sides of the driveway are getting huge. This one is almost up to her roof line:
Picture not included in this copy
Picture not included in this copy
Gonna come down to PA and help out your neighbors with the next storm? Our road wasn't plowed till well into the afternoon of the day after the last storm... It sucked! I actually had plans that day to go do things, but couldn't because we couldn't get anywhere past our driveway.
I LOVE THIS CAR
hahaha!! Is that a MI sticker, on the hood?!! 🤣
YupOriginally Posted by tomato ↑hahaha!! Is that a MI sticker, on the hood?!! 🤣
One of my neighbors noticed it when I was plowing last night and asked if that was where I bought my plow.Originally Posted by tomato ↑hahaha!! Is that a MI sticker, on the hood?!! 🤣
lol thats funny.
You should paint the rusted exposed spots with rustolium or something before it rusts too much
I do need to touch her up a bit. Most of the exterior rusted areas will be chopped off when I get around to doing the roll cage for her, but all of the interior non-treated metal is really rusty.Originally Posted by CtrlAltDefeat ↑You should paint the rusted exposed spots with rustolium or something before it rusts too much
For the Push-Start button and associated hardware - what's the dollar amount of it so far? And will you guys come up with a wiring hook-up diagram for us n00bs to follow. I get pretty nervous when it comes to anything electrical. I know the video instructions sounded simple but I don't trust myself.
My interface module is going to be $50 + shipping. We've been doing some research on the switches to figure out if we can use the Toyota/Lexus ones that are available here. I have a Camry/Avalon one on the way (that I picked up from eBay) to see if it will snap into the Yaris' mounting hole. If the one used on the USDM vehicles fits, then they are readily available. New, they are $62 from TRDSparks.com.Originally Posted by fluke_boy ↑For the Push-Start button and associated hardware - what's the dollar amount of it so far? And will you guys come up with a wiring hook-up diagram for us n00bs to follow. I get pretty nervous when it comes to anything electrical. I know the video instructions sounded simple but I don't trust myself.
The last piece to figure out is the trim piece. One option would be to do a group buy from Europe, where the LHD one is available. I have an extra one of the hole-less trim piece, that I am going to experiment with drilling with a forstner bit to see if it can be modified without looking like a bad hack.
Install is relatively easy. It looks like a lot of wires in the video, but that is because of all of the connections to the switch itself. There really are just two wires that we connect to on the car.
Can't wait. $50 plus shipping? I'm in Scott. Stupid question, for us manual owners, are we going to engage the clutch pedal while we push the start button or no?
I see it as a luxury benefit, but never encountered a 5-speed with a push/start button...so that's why I ask~
I see it as a luxury benefit, but never encountered a 5-speed with a push/start button...so that's why I ask~
The starting procedure will be exactly the same as when you crank with the key, so if you need to push the clutch in now, you'll still need to.Originally Posted by Kioshi ↑Can't wait. $50 plus shipping? I'm in Scott. Stupid question, for us manual owners, are we going to engage the clutch pedal while we push the start button or no?
I see it as a luxury benefit, but never encountered a 5-speed with a push/start button...so that's why I ask~