I put mine in in April... So far no problems.
Power upgrade (pictures).
92 posts · 65,713 views · page 2 of 2
Replies continued
I have had mine in for over a year without problems. With the exception that I had to readjust one of the lock actuators. As far as the noise is concerned, I would say that both are about equal to that of OEM motors and locks. Initially I didn't hook the horn circuit to the locks, but couldn't hear them engage so I added that wire along with the lighting circuit to flash. The window motors are quiet and smooth and just as fast as oem, but it took me about 3 weeks to stop reaching for the window crank.
Hi witch kit did you use for your trunk?Originally Posted by BrianS ↑It took me about 4 hrs to install power locks on both doors and the trunk. I'm sure it could be done faster but I work at a leisurely pace. LOL! I did not do the windows, as I like having the manual cranks.
Why didn't i see this thread before i did my locks? it took me a long time to figure out the actuator location.
Mine was installed in 5 hours 2 doors only and with a budget of around $40 only. Keyless entry.
Mine was installed in 5 hours 2 doors only and with a budget of around $40 only. Keyless entry.
I took the easy route. Got the factory power pkg for $1280 back in '08 when I bought my car. Money well spent with factory warr and parts!
I'm in the process of going from completely manual to power locks. My question is if my car has none of the lock/unlock wire in the 20 pin connector, do I need to tap in there or can I just run the wires straight from the power lock "brain" to the actuators?
Thanks.
Thanks.
You can just run them straight through. There is no reason to go through the hassle of adding the OEM wiring, when it is just going to connect to aftermarket equipment.Originally Posted by thorasaurus ↑I'm in the process of going from completely manual to power locks. My question is if my car has none of the lock/unlock wire in the 20 pin connector, do I need to tap in there or can I just run the wires straight from the power lock "brain" to the actuators?
Thanks.
Thanks for the quick response. I'm sure I'll have more questions along the way but for now I got the extra wiring at Autozone and should be ready for an afternoon of fun 🆘
Okay, I've hit my first wall. I'm using the Black Widow 852 kit by the way in case it needs referenced. Install manual here (http://www.blackwidowsecurity.com/in...%20Install.pdf).
I'm not trying anything fancy, just running the wires straight to the actuators that came with the kit. I've tried connecting the common unlock wire (black/green) on the brain to the green wire on the actuator and the common lock wire (blue/black) on the brain to the blue wire on the actuator. The brain clicks and the horn honks (once for lock; twice for unlock) but the actuator doesn't move. I've tried every combination of the other two possible lock and unlock wires and even switch blue/green and the actuator won't move.
Any ideas? I only hooked up one for now because I wanted to make sure the wiring was right. Do I need to hook up the other three for them to work?
Thanks.
I'm not trying anything fancy, just running the wires straight to the actuators that came with the kit. I've tried connecting the common unlock wire (black/green) on the brain to the green wire on the actuator and the common lock wire (blue/black) on the brain to the blue wire on the actuator. The brain clicks and the horn honks (once for lock; twice for unlock) but the actuator doesn't move. I've tried every combination of the other two possible lock and unlock wires and even switch blue/green and the actuator won't move.
Any ideas? I only hooked up one for now because I wanted to make sure the wiring was right. Do I need to hook up the other three for them to work?
Thanks.
Are the Violet and Violet/Black connected to +12 and the Brown/Black and White/Black connected to ground?Originally Posted by thorasaurus ↑Okay, I've hit my first wall. I'm using the Black Widow 852 kit by the way in case it needs referenced. Install manual here (http://www.blackwidowsecurity.com/in...%20Install.pdf).
I'm not trying anything fancy, just running the wires straight to the actuators that came with the kit. I've tried connecting the common unlock wire (black/green) on the brain to the green wire on the actuator and the common lock wire (blue/black) on the brain to the blue wire on the actuator. The brain clicks and the horn honks (once for lock; twice for unlock) but the actuator doesn't move. I've tried every combination of the other two possible lock and unlock wires and even switch blue/green and the actuator won't move.
Any ideas? I only hooked up one for now because I wanted to make sure the wiring was right. Do I need to hook up the other three for them to work?
Thanks.
Well I just found out that what I thought was a 12v on the fuse panel was a nothing so I switched the violet/black-violet to one that I think is now 12v. Off to reconnect the brown/brown-black to ground. I'll be right back.
Thanks again.
Thanks again.
Weird. I grounded the brown-black/white-black as per the diagram and then hit the remote and nothing happened. So I checked my 12 volt connections and when I unplugged it and plugged it back in, I now have a long horn honk on either button (unlock/lock) instead of the correct horn honks. Maybe I have to reprograme it now. Either way, it's getting late so the horn probably isn't helping the neighborhood. I'll throw in the towel tonight but man I hope I can figure this out by Thursday (inspection).
Thanks.
Thanks.
One more thing. On the recommendation of Dan Q (here), I tapped into a 12v for the power with a spade plug at the fuse box.
For the violet/violet-black I used a different spade plug in the fuse box. Should I instead splice-tap into the one I know for sure is a 12v (i.e. tap the red power wire I already know works)?
Thanks.
For the violet/violet-black I used a different spade plug in the fuse box. Should I instead splice-tap into the one I know for sure is a 12v (i.e. tap the red power wire I already know works)?
Thanks.
That one spade plug (listed in DqnQ's guide) is a good constant +12V supply. If you are using another, make sure that it actually is live, as some the spades are not. Also, make sure you have a fuse one that connection, as that spade is on a 60A circuit.Originally Posted by thorasaurus ↑One more thing. On the recommendation of Dan Q (here), I tapped into a 12v for the power with a spade plug at the fuse box.
For the violet/violet-black I used a different spade plug in the fuse box. Should I instead splice-tap into the one I know for sure is a 12v (i.e. tap the red power wire I already know works)?
Thanks.
I plan to get the meter out at lunch to check but once I find one 12v constant, I'm just going to link everything up to it with splices. Everything has fuses and I just want to make sure everything is getting power. Either that or I'll tie in one to the 12v on the fuse box and tie the violet/violet-black to the yellow on the ignition. Hopefully something with work.
Thanks as always.
Thanks as always.
Still nothing. Do you think I need to wire relays like this for it to work? LINK
Onward and upward. I started from scratch so as to make sure all the wires were connected as they should and found that I had not connected the black ground wire (duh).
Anyway, when I finished re-wiring everything, the actuators now work BUT.... both buttons on the remote lock the car when blue/black (brain) is connected to blue (actuator) and green/black (brain) is connected to (green) actuator. If I swap them on the actuator wires, both remote buttons unlock the car. Obviously I want one button to lock and the other to unlock.
I've attached some pictures but at this point I think it's just a right wire, right place issue.

Anyway, when I finished re-wiring everything, the actuators now work BUT.... both buttons on the remote lock the car when blue/black (brain) is connected to blue (actuator) and green/black (brain) is connected to (green) actuator. If I swap them on the actuator wires, both remote buttons unlock the car. Obviously I want one button to lock and the other to unlock.
I've attached some pictures but at this point I think it's just a right wire, right place issue.


Your +12V connection of the violet wires should be to the top terminal in the connector between the single blue and the huge single black wires.
From what I can see in the two pics:
Brown/White horn output - OK
Black/Yellow dome light output - OK
Red +12 Power - should be connected along with Violet wires to correct +12 terminal
Yellow Ignition switched +12 - Can't tell from your pic, but it should be connected to the pink wire on the Ignition switch connector.
Brown/White horn output - OK
Black/Yellow dome light output - OK
Red +12 Power - should be connected along with Violet wires to correct +12 terminal
Yellow Ignition switched +12 - Can't tell from your pic, but it should be connected to the pink wire on the Ignition switch connector.
I had it there but there was no power. Weird I know; but there is power at this one so I don't know what to think. As for the red 12v +, I thought it's ok to connect it to the yellow ignition or is that not true?Originally Posted by CTScott ↑Your +12V connection of the violet wires should be to the top terminal in the connector between the single blue and the huge single black wires.
Thanks, CTScott, you are the man. I'm also consulting the dealer who sold it to me so hopefully between both, I can figure out what's up.
That may be a sedan vs. Lifback wiring difference. Those are actually fuse holders for some features that we don't get in the US. Just make sure that where you connected them to shows +12 with the ignition on or off.Originally Posted by thorasaurus ↑I had it there but there was no power. Weird I know; but there is power at this one so I don't know what to think. As for the red 12v +, I thought it's ok to connect it to the yellow ignition or is that not true?
Thanks, CTScott, you are the man. I'm also consulting the dealer who sold it to me so hopefully between both, I can figure out what's up.
For the red, your module wants to see unswitched power on that wire.
Actually you were right. The constant 12v works there so I hooked in the violets and the red there and the dealer suggested it might be the ground so I put all three of those together on the ground. Still only locks and doesn't unlock or vice-versa. So close.
Does it matter that the ground isn't a ring? I got one of those U-shaped connectors. I can buy a ring if need be but I didn't think it was a big deal. Otherwise I'm just cruising forums looking for someone with the same problem.
Should I try using the violet wires or the brown/black and white black as the lock/unlock wires instead? That doesn't really make sense but the manual says polarity could be the problem so... I'm lost.
Does it matter that the ground isn't a ring? I got one of those U-shaped connectors. I can buy a ring if need be but I didn't think it was a big deal. Otherwise I'm just cruising forums looking for someone with the same problem.
Should I try using the violet wires or the brown/black and white black as the lock/unlock wires instead? That doesn't really make sense but the manual says polarity could be the problem so... I'm lost.
I don't understand what you mean by "I put all three of those together on the ground". Do you mean Black, Brown/Black and White/Black? (since they are the only wires that should be grounded).Originally Posted by thorasaurus ↑Actually you were right. The constant 12v works there so I hooked in the violets and the red there and the dealer suggested it might be the ground so I put all three of those together on the ground. Still only locks and doesn't unlock or vice-versa. So close.
Does it matter that the ground isn't a ring? I got one of those U-shaped connectors. I can buy a ring if need be but I didn't think it was a big deal. Otherwise I'm just cruising forums looking for someone with the same problem.
Should I try using the violet wires or the brown/black and white black as the lock/unlock wires instead? That doesn't really make sense but the manual says polarity could be the problem so... I'm lost.
A ring terminal doesn't matter as long as you are on a solid ground (for example the bolt under the driver's kick panel).
With the actuators, are they two wire? If so, Blue/Black should go to one of the two wires and Green/Black to the other.
Yeah, sorry for not being clear. I wrapped black, black/white, and brown/black and put them into a u-shaped connector and then connected it to the ground bolt.
I'm thinking if maybe somehow there's not a good connection with the pink ignition cable, maybe the remote is programmed incorrectly. I'll figure something out hopefully.
And yeah, they are two wire actuators.
I'm thinking if maybe somehow there's not a good connection with the pink ignition cable, maybe the remote is programmed incorrectly. I'll figure something out hopefully.
And yeah, they are two wire actuators.
I don't think so on the programming.Originally Posted by thorasaurus ↑Yeah, sorry for not being clear. I wrapped black, black/white, and brown/black and put them into a u-shaped connector and then connected it to the ground bolt.
I'm thinking if maybe somehow there's not a good connection with the pink ignition cable, maybe the remote is programmed incorrectly. I'll figure something out hopefully.
And yeah, they are two wire actuators.
Disconnect the blue/black and green black wires from the actuators and measure the voltage between them.
It should be 0V with no button pressed and the +12 when one button (lock/unlock) is pressed and -12 when the other lock/unlock is pressed.
how many parts are used in the coilibri kit? im finding all sorts of kits places, but none that have as many washers and brackets as that kit. how many are actually needed?
Hey, good news! I got everything up and working. Turns out the tap splice to the ignition wire wasn't a good connection so while I had thought I had programmed it, I obviously hadn't. So once I got that programmed it now locks and unlocks. Hooray.
Time to tape everything up and put it back together.
Now to name my first child CT or Scott, kidding...
Time to tape everything up and put it back together.
Now to name my first child CT or Scott, kidding...
I got mine off fleabay but if you're going with A1, you'll need this kit I'm pretty sure (LINK) if you have a sedan; the two-door version if you have a coupe.Originally Posted by TickleTimeTim ↑how many parts are used in the coilibri kit? im finding all sorts of kits places, but none that have as many washers and brackets as that kit. how many are actually needed?
The yaris has cable-pull locks so you need special brackets to hold the cable sheath stationary while the actuator moves the cable (see the first post). That's what all the parts are for.
Good luck.
Bought this kit and it came today. Took me four hours to do the first door, lol. Do the doors not lock or unlock after you have the kit completely assembled and tightened down? I only have the rear left door done, and the lock doesn't move when trying to do it manually.
Well I got all my actuators, etc working. My question is. Where did you connect the red power wire to? The battery or is there somewhere under the dash I can connect it?
Basically I can't figure out which open spot in the fuse box, under the dash to use to get the constant 12v of power.....???
Check out my remote start DIY for a good location for a high current constant +12:
Remote Start DIY Wiring Guide 2006-2010 Yaris
Remote Start DIY Wiring Guide 2006-2010 Yaris
hell might as well fatmat that door for a quieter ride ;P
Well I finally finished installing the power locks and keyless entry. So far so good. Just hoping the lock cable doesn't snap anytime soon.
How much more difficult is it to install the security system if I ordered the package from A1electric with it?
http://www.a1electric.com/Merchant2/...Code=W01F-740T
http://www.a1electric.com/Merchant2/...Code=W01F-740T
I just recently installed a power lock kit with remote entry from A1electric and a power window kit from another vendor. Installing the actuators is the easy part, as compared with installing the keyless entry, remote start, or alarm module.Originally Posted by MyzticZ3r0 ↑How much more difficult is it to install the security system if I ordered the package from A1electric with it?
http://www.a1electric.com/Merchant2/...Code=W01F-740T
From pictures, the actuators do look simple enough to install! The choice of installing an alarm, along with the power lock kit, is tempting! I *feel* like I can install the actuators, however, when it comes to an alarm, that is where I'm a bit weary. I think I'm going to order the power window kit and the power lock kit from a1electric sometime this week. I figured if I have the door panel off already, why not do both at the same time? 😳 At the same time, am I biting off more than I can chew?Originally Posted by CTScott ↑I just recently installed a power lock kit with remote entry from A1electric and a power window kit from another vendor. Installing the actuators is the easy part, as compared with installing the keyless entry, remote start, or alarm module.
It definitely makes sense to do them at the same time, and the wiring is really pretty easy. I can walk you through any questions that you run into.Originally Posted by MyzticZ3r0 ↑From pictures, the actuators do look simple enough to install! The choice of installing an alarm, along with the power lock kit, is tempting! I *feel* like I can install the actuators, however, when it comes to an alarm, that is where I'm a bit weary. I think I'm going to order the power window kit and the power lock kit from a1electric sometime this week. I figured if I have the door panel off already, why not do both at the same time? 😳 At the same time, am I biting off more than I can chew?
Thanks Scott! It's appreciated. I pulled the trigger - now the waiting game ^^"Originally Posted by CTScott ↑It definitely makes sense to do them at the same time, and the wiring is really pretty easy. I can walk you through any questions that you run into.
Did anyone try to use original switches with this after market kit? Where can I get wiring schematic for the master switch?
Thanks
Sent from my iPhone using Tapatalk
Thanks
Sent from my iPhone using Tapatalk
Originally Posted by paultyler_82 ↑anyone have any info yet on how to convert the hatch on the liftback to power lock/unlock? I think power popping the hatch would be a major hassle, but I would at least like lock/unlock.
I did my wasn't easy in the beginning
But it's much simpler than it looks.
Sent from my iPhone using Tapatalk