Yarisworld Archive

Power upgrade (pictures).

92 posts · 65,713 views · page 1 of 2

W.A.S.POriginal postWestchester County, NY · Oct 11, 2006#1
Well, I am half way through the process, and I have to tell you that it gets simpler and simpler as the minutes past by. At the beginning it looks scary to see 1000 parts and wires and not have a clue what they are for, but once you remove the door panel you get the idea and the process gets simplified. I don't plan to do a tutorial(yet), but I wanted to provide some pictures so you guys get an idea of the location I chose for the brackets, door lock actuator and window regulator, ah! and a view of the switches once installed, the whole thing looks stock and works like a charm.
FYI, I used the Colibri power window kit and the MES door lock kit, both from www.A1Electric.com

I hope the pictures help! 🙂
Door unplugged.jpgDoor unplugged2.jpgactuator.jpgswitches1.jpgswitches2.jpg

Replies 91

twixtsyracuse, ny · Oct 11, 2006#2
nice install, looks Just like mine! i used standard panasonic actuators though. window motors have been working great, once the door is sealed up its pretty quiet
🤘 🤘
vodkalushRochester, NY · Oct 11, 2006#3
very nice, now all you have left is the passanger side 😉
tomjaszLost Wages · Oct 11, 2006#4
Originally Posted by W.A.S.P
Well, I am half way through the process, and I have to tell you that it gets simpler and simpler as the minutes past by. At the beginning it looks scary to see 1000 parts and wires and not have a clue what they are for, but once you remove the door panel you get the idea and the process gets simplified. I don't plan to do a tutorial(yet), but I wanted to provide some pictures so you guys get an idea of the location I chose for the brackets, door lock actuator and window regulator, ah! and a view of the switches once installed, the whole thing looks stock and works like a charm.
FYI, I used the Colibri power window kit and the MES door lock kit, both from www.A1Electric.com

I hope the pictures help! 🙂
Would you be kind enough to post the kit model numbers?🙇
tiksmanAtlanta · Oct 11, 2006#5
NICE!!!!!!!!!!!!
ItsMyDailyLos Angeles, CA · Oct 11, 2006#6
clean.
TrancosRtS Florida · Oct 11, 2006#7
Niceeee...
The only thing is that orange disc where the crank used to be...
KittPanama City, Panama · Oct 11, 2006#8
Hey can I ask how much for the power window?
W.A.S.PThread starterWestchester County, NY · Oct 11, 2006#10
Originally Posted by Kitt
Hey can I ask how much for the power window?

$145 from A1Electric
W.A.S.PThread starterWestchester County, NY · Oct 11, 2006#11
Originally Posted by TrancosRt
Niceeee...
The only thing is that orange disc where the crank used to be...
The orange thing is just a sticker; it's used in case you have to cut to adapt the covers for the hole. In the case of the Yaris there is only about 3mm all around that has to be removed so the cover goes in.
hasher22Australia Sydney · Oct 11, 2006#12
Hey lookin fresh. Great job

i noticed that you installed some Sat6 Spacers for your speakers. I was just wondering what Screw size did you use???
W.A.S.PThread starterWestchester County, NY · Oct 11, 2006#13
Originally Posted by hasher22
Hey lookin fresh. Great job

i noticed that you installed some Sat6 Spacers for your speakers. I was just wondering what Screw size did you use???
Thanks Hasher!.. I used the screws provided with the Sony speakers. After the pictures I took them off because I needed to route the cables from the power locks and windows trough the boot right behind them and decided that didn' want screws anymore, so I enden up riveting the spacers to the door, just like the stock assembly. You can use up to a 5 X 30mm screw for those holes though!
pennystocksChicago, IL · Oct 16, 2006#14
Can you put the manual handle back on??? That'd be tight, have the manual handle roll it self up, lmao.
jbllQuebec, Canada · Oct 16, 2006#15
Where did you get your electricity for the power window? 😕

Cheer!👍
W.A.S.PThread starterWestchester County, NY · Oct 17, 2006#17
Originally Posted by pennystocks
Can you put the manual handle back on??? That'd be tight, have the manual handle roll it self up, lmao.
That would be a little dangerous!... No, but the kit suplies an "emergency" window handle that can be used if anything breaks.
W.A.S.PThread starterWestchester County, NY · Oct 17, 2006#18
Originally Posted by jbll
Where did you get your electricity for the power window? 😕

Cheer!👍
Right above the fuse box. You have to test which wires are powered by the ignition being in the on position though.
W.A.S.PThread starterWestchester County, NY · Oct 17, 2006#19
Originally Posted by vst
How did you get those power switches? Did they come with the kits? How did you install those?

Also, do you think this kit would work on my Yaris Sedan: http://cgi.ebay.com/ws/eBayISAPI.dll...category=50552

It sure looks like it would work, you will even have spare parts as it is designed for 4 door applications. The switches are optional, you can get them from www.a1electric.com . I'm about to purchase one more for the passenger side, as the window switch looks a little lonely on that side 😉
paultyler_82USA · Oct 18, 2006#20
anyone have any info yet on how to convert the hatch on the liftback to power lock/unlock? I think power popping the hatch would be a major hassle, but I would at least like lock/unlock.
ism3tSouthern California · Oct 18, 2006#21
when i got my car upgraded (at a local shop) to power locks, they were able to get it so when i press the unlock button (on my stock key/alarm) my trunk unlocks as well. let me tell you guys....its pretty sweet. the first week i had the car it was hell unlocking/relocking the trunk everytime i went into it (especially since the damn alarm would go off if i forgot to disarm before opening the trunk) the only thing they said they couldnt do was get the trunk to pop open without me pressing the button, but that is a minor detail. CHEERS!
W.A.S.PThread starterWestchester County, NY · Oct 18, 2006#22
Originally Posted by ism3t
when i got my car upgraded (at a local shop) to power locks, they were able to get it so when i press the unlock button (on my stock key/alarm) my trunk unlocks as well. let me tell you guys....its pretty sweet. the first week i had the car it was hell unlocking/relocking the trunk everytime i went into it (especially since the damn alarm would go off if i forgot to disarm before opening the trunk) the only thing they said they couldnt do was get the trunk to pop open without me pressing the button, but that is a minor detail. CHEERS!
Dude, I see my next project coming up! But yeah, I doubt it would be easy to set up a pop up mechanism unless you shave the handle and eliminate the lock. Not worth the hassle IMO.
argylesocksmanch · Oct 18, 2006#23
Originally Posted by W.A.S.P
The orange thing is just a sticker; it's used in case you have to cut to adapt the covers for the hole. In the case of the Yaris there is only about 3mm all around that has to be removed so the cover goes in.

got a picture of the cover/cap used once the crank arm is removed??


looks great. nice job.
pezfeoAR · Nov 11, 2006#24
Originally Posted by ism3t
when i got my car upgraded (at a local shop) to power locks, they were able to get it so when i press the unlock button (on my stock key/alarm) my trunk unlocks as well. let me tell you guys....its pretty sweet. the first week i had the car it was hell unlocking/relocking the trunk everytime i went into it (especially since the damn alarm would go off if i forgot to disarm before opening the trunk) the only thing they said they couldnt do was get the trunk to pop open without me pressing the button, but that is a minor detail. CHEERS!
Do you know if the hatch is also cable style or could you post a picture of what your hatch actuator setup looks like? I am putting power options on my hatch this week and def. want the hatch to lock and unlock with the doors.
BlenjarCT · Dec 25, 2006#25
I may buy that soon..

-- Blen
KSIbuckyFond du Lac, WI · Dec 25, 2006#26
what is the point it adds weight and costs way to much
Kaotic LazagnaCentral Valley, CA · Dec 25, 2006#27
i got ripped off for mine, 1400 for the stupid Autohaus package. it's a POS. what kind of remote entry works no more than 15 feet of the car? and it also has problems continually.
PinnacleVERNON · Jan 2, 2007#28
I mounted the lock actuators on one of my doors the way it is pictured but after watching the bracket move when the acturator was activated made me believe that the screws on the bracket would loosen over time. I deceided to mount the actuators directly to the door in the same area that you have mounted the top of the bracket. I mounted the clip a little higher than the actuator and bent the rod. It is very secure and works fine. I had to remove some of the foam on the back of the door panel but it fits just fine. I recomend you to use different screws to secure the actuators. Maybe a hex head that can be turned with a socket would be easier in a tight space. Trying to use a short screwdriver to turn those cheap screws will only cause the head to strip. I also kept the cable fastened to the white plastic bracket and I secured the outside of the cable sleeve with hot glue to keep it from moving as an added precaution. The outer sleeve of the cable should not move. Power windows will be my next project and it looks like you did a nice job on your install. Thanks for the pictures.
BlenjarCT · Jan 2, 2007#29
Actually think you can do a DYI with pictures..

-- Blen
daq421Livermore, CA · Jan 3, 2007#30
So I gotta ask.. was the Power Package (pwr windows, cruise, pwr locks, ABS) not available in your area?

-Peter
mgthompsonColorado · Jan 3, 2007#31
All the ones in my area did not offer the power package and alot were bare without the convience package either. I could only find one person who could do the power locks since they were the cable wire locks but I'm getting a good deal cause he works with me.
PinnacleVERNON · Jan 3, 2007#32
I believe that I had the first Yaris sold in New Jersey. I bought it the first day it came out and it was the only one the dealer had. It was a base car with auto trans, rear defroster and wiper. They could have sold three or four of these cars that day while I was waiting to sign the contract. I put in a remote starter as well as the door locks at seperate times but I should have just done it all at once with a good alarm system with remote start and locks. If I get a chance in the near future I will take off the door panel and take a photo of the acturator installation for anyone who is interested.
TrancosRtS Florida · Jan 4, 2007#33
A lilttle tip for somebody doing a Keyless install (I used A1Electric's keyless kit).
The parking lights wire to connect the "visual" indication is the green wire in the big connector at the top left corner of the fuse box.
It took me some internet time to figure it out !!
mwykeesf · Jan 24, 2007#34
can u picture how the wires go and connect??......thx
BatmangTacoma, WA · Jan 24, 2007#35
That looks great! Fantastic job!

I'm thinking of doing the power locks install on my girlfriend's Yaris. I'm sure your pictures will come in handy.

How hard was it to install the optional door switches into the arm rest? Did you just cut a little hole?
rnd243Richmond, CA · Jan 25, 2007#36
I would advise against the switches if you're just doing locks. I mean, the ones in the picture look great, but you don't need them. The locks work fine without them, and there is enough work to install them without extra switches.
TrancosRtS Florida · Jan 25, 2007#37
I'll post pics of the cabling once I clean it up. Frankly, that area is a mess right now!!! I cared to get it working, not to make it pretty.
I didn't use a switch. If I need to open it, just roll one lock and the other one will follow. The nice thing about the A1 keyless unit is that about 5s after contact, the doors unlock themselves, and once you turn off the car, they unlock automatically. It's a nice feature really
TreyzLong Island, NY · Jan 26, 2007#38
Sweet W.A.S.P.! Looking to get it in a few months. If I run into problems, you're a local guy ha!
BatmangTacoma, WA · Feb 1, 2007#39
Originally Posted by rnd243 ↑
I would advise against the switches if you're just doing locks. I mean, the ones in the picture look great, but you don't need them. The locks work fine without them, and there is enough work to install them without extra switches.
Yah, good call, I didn't realize until I researched more that the pre-existing lock switches will lock/unlock both doors at once.

Can any of you guys who have done this install post a quick list of what tools are needed or that you used? I'm pretty new to DIY stuff, so I'm still learning.
rnd243Richmond, CA · Feb 1, 2007#40
Originally Posted by Batmang ↑
Can any of you guys who have done this install post a quick list of what tools are needed or that you used? I'm pretty new to DIY stuff, so I'm still learning.
A tool for popping the door panels and a tool for pushing the ring off the window crank would be nice, but not completely necessary.
A drill
Various screwdrivers
Wire strippers and cutters and stuff

I can't think of much else. You don't need anything you don't have in the garage. The pros solder the wires when they splice into the electrical system. I use those tap connecters. Not quite as permanent, but easier.
TaiyakiHonolulu, HI · May 23, 2009#41
I have the same power window kit, but cant find a power source and illumination source to tap to that wont blow fuses. any help?
Liu997Hicksville, LI · May 24, 2009#42
Is it possible to get the switches in the panel near the e-brake?
squall_xSan Diego · May 24, 2009#43
I have a question what is this part I have on red called or where can I buy it? I am reffering to the piece to hold the door cable and the metal piece from actuator thank you.

squall_xSan Diego · May 24, 2009#44
Originally Posted by Liu997 ↑
Is it possible to get the switches in the panel near the e-brake?
You could potentially put the switches where ever you want. You just need to run more cable to make it happen.
BrianSSeattle, WA · Jul 28, 2009#45
Hi all! I just ordered the keyless entry/power locks kit below. This thread should come in very handy while I try to install it. I'll try to take pictures of my install as I progress. Thanks!

http://www.a1electric.com/Merchant2/...Code=W01C-712T
TickleTimeTimArkansas · Jul 28, 2009#46
are they both universal kits? would love to have some power windows. and a key faub would be nice too.
BrianSSeattle, WA · Jul 29, 2009#47
Originally Posted by BrianS ↑
Hi all! I just ordered the keyless entry/power locks kit below. This thread should come in very handy while I try to install it. I'll try to take pictures of my install as I progress. Thanks!

http://www.a1electric.com/Merchant2/...Code=W01C-712T
The keyless entry/power locks kit? Yes, it's universal and here is a link to a power window kit on there that some have installed in the Yaris. I actually prefer manual windows, so I won't be doing that upgrade. LOL!

http://www.a1electric.com/Merchant2/...ct_Code=Master
lilriki509SoCal · Aug 28, 2009#48
how long does the install take for the door locks and windows?
BrianSSeattle, WA · Aug 30, 2009#49
It took me about 4 hrs to install power locks on both doors and the trunk. I'm sure it could be done faster but I work at a leisurely pace. LOL! I did not do the windows, as I like having the manual cranks.
toyota_loverMI · Nov 23, 2009#50
How are the motors / locks holding up? Another question, are the power window motors noisy and slower than OEM standards?