therefore, it is the same refresh rate as the Ecometer, both are 2x a sec.Originally Posted by Henry G. ↑Scangauge updates every 1/2 second in fast mode, pretty darn good. Its way more product for the money IMO.
So how 'bout that Ecometer by Auto meter?
283 posts · 90,128 views · page 5 of 6
Replies continued
Just got an Ecometer yesterday from Garm, and I have to say this is probably one of the best things I've bought for the Yaris, right up there with the Fujitsubo. I drove the car the way I normally do, and I'm getting about 36.6 mpg average. It's great to be able to have a tangible way of monitoring the effect your driving style has on mpg. Can't wait till the next tank, so I can experiment with different ways of driving. Greatest $70 so far.
Cool. Does it monitor everything else too and clear trouble codes? If so its a bargain....Originally Posted by ezhacker1 ↑therefore, it is the same refresh rate as the Ecometer, both are 2x a sec.
The ecometer does not display or erase trouble codes. If you want that capability and extra engine info the SG II is the way to go. If you only need instant mpg, avg mpg and tach than the ecometer is a less expensive way to get there.
R2
R2
engine codes would complete the perfectness of the ecometer.
Code reading/erasing is awesome... I've already used it on 2 peoples cars.. the GF's and a co-workers... both cars are 00 or newer tooOriginally Posted by R2D2 ↑The ecometer does not display or erase trouble codes. If you want that capability and extra engine info the SG II is the way to go. If you only need instant mpg, avg mpg and tach than the ecometer is a less expensive way to get there.
R2
Yep a code reader is handy alright! I went with the ecometer though because I already had an Innova scan tool and all I really needed was the tach and instant mpg. Both units have their place depending on what you need and how much one wants to spend.Originally Posted by talnlnky ↑Code reading/erasing is awesome... I've already used it on 2 peoples cars.. the GF's and a co-workers... both cars are 00 or newer too
R2
iv noticed that using neutral a lot compared to DFCO produces near perfect readings at the pump. DFCO seems to result in readings ~7% higher than actual. anyone else?
I used to use neutral to coast a lot a long time ago, one day I just switched over to never using neutral. I went from consistently getting 36MPG to 39MPG.
I believe your results per calcs - but it defies common sense considering total disengagement that is 'neutral.' Even with engine cut-off, you wouldn't expect these results. Will be getting ecometer soon and will let all know of change of habits and mpg upon monitoring.Originally Posted by Sodium Duck ↑I used to use neutral to coast a lot a long time ago, one day I just switched over to never using neutral. I went from consistently getting 36MPG to 39MPG.
I know it has probably been all spelled out but what exactly is involved in the install of this?
I have my Ecometer sittin on my dash to the left of the gauge cluster (double-sided tape), with the wire running across the dash under my TomTom mount, and down the a-pillar to the OBDII port. (I'll try to post a pic later today if I remember.)Originally Posted by 09box ↑I know it has probably been all spelled out but what exactly is involved in the install of this?
Really, all you need to do is plug it into the OBDII, run your wire how you want it, and mount it where you want it. That's all. 🤘
DevilGirl,
So you bought the ecometer-how do you like it so far?
R2
So you bought the ecometer-how do you like it so far?
R2
It's good. I use it for the tach and the MPG's. I'm still working on evening out my acceleration techniques (darn manual tranny 🤷), but I think once I get that worked out, it will become even more useful than it is.Originally Posted by R2D2 ↑DevilGirl,
So you bought the ecometer-how do you like it so far?
R2
I also have the TomTom Go 740 Live which alerts me when I go above a set speed (72 for me), so I have that as a backup to help keep my speeding under control. Came in handy today. There was a cop sitting with a radar detector on the way home today.
Good glad it's working out. Most people seem to be very happy with them.
R2
R2
I want to get one of these, how hard is it to hook up? I know nothing about cars or mechanical issues with cars..so will i have a hard time hooking it up? And does it calculate when your sitting there idle?
Simple plug and play. Just stick it where you think it looks best. 👍Originally Posted by Twistoffate0817 ↑I want to get one of these, how hard is it to hook up? I know nothing about cars or mechanical issues with cars..so will i have a hard time hooking it up? And does it calculate when your sitting there idle?
Yep it really is just a plug and play. Plug into the obd II port, route the wire out of the way and mount in an easy to see location. The A pillar, steering column (just mount far enough forward to allow clearance for driver side glove box to open) and near the center gauge cluster seem to be popular choices. The enclosed 3M temporary industrial fastener works quite well, as does 3m double sided trim tape available at auto parts stores. There is no permanent alteration to the vehicle required.Originally Posted by Twistoffate0817 ↑I want to get one of these, how hard is it to hook up? I know nothing about cars or mechanical issues with cars..so will i have a hard time hooking it up? And does it calculate when your sitting there idle?
The ecometer calculates mpg anytime the engine is running, including while idling. You can watch your avg mpg drop as you idle. It is very accurate-mine has always been within .7 mpg or so of calculating by the "pump method" at fill up.
This is a long thread, but there are quite a few good points and mounting ideas mentioned here if you can work through it. Most everyone seems to be very satisfied with their ecometer.
Hope this helps!
R2
Today at fill up the ecometer was dead on! 35.3mpg was the ecometer reading, 35.323 was the calculated at pump. No DFCO, just lots of nuetral whenever possible, id say 20% highway rest city. I have yet to take the car on a long trip highway run. the longest iv done is 44 miles one way, got 44.52mpg that time. Car is still under 4k on the odo.Originally Posted by R2D2 ↑
The ecometer calculates mpg anytime the engine is running, including while idling. You can watch your avg mpg drop as you idle. It is very accurate-mine has always been within .7 mpg or so of calculating by the "pump method" at fill up.
I love this thing btw! Definite improvement in MPG when you actually get to see real time how your driving habits change your mileage. Here's some pics where I mounted mine btw.
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
I just got a Simota SRI and was wondering if I would need to adjust the Ecometer?
If so, how would I change it? I have the instructions at home but I will be away for a while and would like to adjust it asap, if needed.
Thanks in advance.
If so, how would I change it? I have the instructions at home but I will be away for a while and would like to adjust it asap, if needed.
Thanks in advance.
Not sure how much the intake will change things. Next fill up compare pump calc to the ecometer. To get dialed in a little faster I figure the percent difference between the two and adjust accordingly.
I don't have my instructions in front of me but I did this not long ago. To adjust the ecometer unplug it from the obd port. Hold down the left button while plugging ecometer back in. If done properly you should see EFF on the meter. Then I believe you keep pressing the right button until the percentage you need is on the screen (they range from 60 to 140). Then press the left button when done to finalize the adjustment.
I may have messed up which button scrolls through the numbers but that should hopefully get you in the right direction.
R2
I don't have my instructions in front of me but I did this not long ago. To adjust the ecometer unplug it from the obd port. Hold down the left button while plugging ecometer back in. If done properly you should see EFF on the meter. Then I believe you keep pressing the right button until the percentage you need is on the screen (they range from 60 to 140). Then press the left button when done to finalize the adjustment.
I may have messed up which button scrolls through the numbers but that should hopefully get you in the right direction.
R2
*post AFE intake update
before when i was on stock intake the ecometer was dead on with DFCO resulting into higher actual mpg then gauged, which makes sense. Now after the intake im seeing 10% over estimation, i thought the ECU would learn whats going on with the new intake, guess not.
before when i was on stock intake the ecometer was dead on with DFCO resulting into higher actual mpg then gauged, which makes sense. Now after the intake im seeing 10% over estimation, i thought the ECU would learn whats going on with the new intake, guess not.
Is this still worth it to everyone? I just want something where i can keep it plugged in, and whenever iturn the car on and go it will show me my instant MPG. Do i need to reset this or anything? When i get gas do i need to reset it?
If you leave it on instant MPG display, it would just display that all the time. I don't think you would never need to reset it. If you were having it display average MPG, it would be best to reset it after each fillup, but that only takes two clicks to do, so who cares.
Just ordered mine from the site you guys provided. It says its shipping from NJ...which is where I live so hopefully it will get here soon! I cannot wait to try it out. :)
More Update:
Cleaned the MAF sensor with MAF Cleaner, hopefully my mpg will improve and/or get the reading to match actual. The ecometer ONLY read wrong after my AFE intake.
Cleaned the MAF sensor with MAF Cleaner, hopefully my mpg will improve and/or get the reading to match actual. The ecometer ONLY read wrong after my AFE intake.
Hmm, interesting idea. Is the MAF sensor cleaner just compressed air to blow the crap off it, or is it something specific that you get at the auto parts store? Do we have only that one MAF sensor by the intake, or is there more than one on the car that would be worth cleaning?
Hello all, I have recieved my eco meter today!
I just got back from testing it, and am afraid to say that im dissapointed in the product.
Maybe the thing needs some settings adjusted in order to work better:
I followed the instructions to get to the EEF i think it said, and it says to adjust it from 60-140 if its calculating too high. My eco meter was all over the place every second. going from 11 to 140 within one second. (mpg that is)
So i set the EEF at 61.
What is everyone elses set at?
My other problem is: Whenever i have my foot on accel pedal the MPG seems fine. whenever i take it off it quickly zooms to 100+ and when i put my foot back on it takes my mpg up to 55-65. This seems very off.
Also when I come to a complete stop the eco meter goes to 0 and stays there. This is wrong too from what I have been reading.
What am i supposed to be setting this thing at?
Is there something I am doing wrong?
I just got back from testing it, and am afraid to say that im dissapointed in the product.
Maybe the thing needs some settings adjusted in order to work better:
I followed the instructions to get to the EEF i think it said, and it says to adjust it from 60-140 if its calculating too high. My eco meter was all over the place every second. going from 11 to 140 within one second. (mpg that is)
So i set the EEF at 61.
What is everyone elses set at?
My other problem is: Whenever i have my foot on accel pedal the MPG seems fine. whenever i take it off it quickly zooms to 100+ and when i put my foot back on it takes my mpg up to 55-65. This seems very off.
Also when I come to a complete stop the eco meter goes to 0 and stays there. This is wrong too from what I have been reading.
What am i supposed to be setting this thing at?
Is there something I am doing wrong?
You have it set to instant MPG readouts... Read the manual more thoroughly.
When at a complete stop, you are getting zero MPG. Whatever you have read else where would be news to me...
When at a complete stop, you are getting zero MPG. Whatever you have read else where would be news to me...
I didn't read this thread all way through, but I really don't get it what it helps to buy this kind of "meters". Cars own monitor shows the same thing (mpg) or like here in Europe litres/100 kilometres.
What's the point when cars own computer shows the same thing?
What's the point when cars own computer shows the same thing?
Okay so it shooting from 15 mpg to 140 is normal? I duno how to change my driving style if at every second its going from 20 mpg to 40, then to 70, then to 20. Its sort of odd. Shud I leave it on average MPG?
I dont know about anyone else, but my Yaris in the USA does not come with an instant MPG reader. So this device does it for us.Originally Posted by Falconia ↑I didn't read this thread all way through, but I really don't get it what it helps to buy this kind of "meters". Cars own monitor shows the same thing (mpg) or like here in Europe litres/100 kilometres.
What's the point when cars own computer shows the same thing?
American models do not display this information.Originally Posted by Falconia ↑I didn't read this thread all way through, but I really don't get it what it helps to buy this kind of "meters". Cars own monitor shows the same thing (mpg) or like here in Europe litres/100 kilometres.
What's the point when cars own computer shows the same thing?
When you are coasting down a hill or to a stop and your foot is not on the gas, it would stand to reason that your instantaneous MPG would be very high (yes 140+ MPG) as the car is in motion and it is barely using any gas.Originally Posted by Twistoffate0817 ↑Okay so it shooting from 15 mpg to 140 is normal? I duno how to change my driving style if at every second its going from 20 mpg to 40, then to 70, then to 20. Its sort of odd. Shud I leave it on average MPG?
When you are at a stop, or just beginning to accelerate, it would also stand to reason that your instantaneous MPG would be very low (yes <15 MPG) as the car is not moving very far or fast and you have your foot buried in the gas.
Switch it to average MPG, this will coincide more closely with what you envision MPG to be.
OR, again, you could read the manual. For example, I keep mine on average MPG, and have the light ring set up with a MPG goal of 40. Such that, when the light ring is not displaying green, I know I am getting <40 MPG and should back off of the throttle. But at the same time, I am not distracted by all the wide fluctuations of the instantaneous MPG readout. When the light ring is displaying red, that means I'm getting <10 MPG, and when about 1/4th of the light ring is lit up green, I'm getting >100MPG. Just before it starts lighting up orange is 40MPG.
I hope that explains some of your concerns. It's funny how people think MPG is this constant static thing that barely ever changes. There's this weird disconnect I've noticed -- people don't understand the farther you push the pedal to the floor, well, the more gas your are dumping into the engine. Yes, your MPG ranges very widely, but when you average ALL that data out, you get a nice normal number that you can relate to.
I've seen a few posts/product reviews like this online. One where the guy even returned it because he thought it was broken. 🙄
Twistoffate,
The instant mpg readings you reported are exactly what I would expect (and get on my own unit). The "instant" setting is exactly what it says-the fuel economy you are achieving that instant, updated every half second. It should read zero when stopped and the reason it can jump to 140-200+ mpg when you release the pedal is DFCO. I don't use the instant setting much as the ecograph around the perimeter of the display accomplishes the same task so I tend to stay on the avg mpg mode.
It sounds like what you want is the average mpg mode which will be more "stable" and will drop while idling at a light.
What you need to do is reset your EFF to about 95% to start. Next fill up reset your average mpg and track it from there. You can fine tune the accuracy with your EFF setting if needed. I also recommend setting the ecograph to display your target mpg which is covered in the instructions.
Review the instructions again and please ask away here if there is something we can clarify or help you out with.
Once you figure it out I think you will be happy with it-there are a bunch of us here with ecometers and they are very liked from what I've seen.
Good luck!
R2
The instant mpg readings you reported are exactly what I would expect (and get on my own unit). The "instant" setting is exactly what it says-the fuel economy you are achieving that instant, updated every half second. It should read zero when stopped and the reason it can jump to 140-200+ mpg when you release the pedal is DFCO. I don't use the instant setting much as the ecograph around the perimeter of the display accomplishes the same task so I tend to stay on the avg mpg mode.
It sounds like what you want is the average mpg mode which will be more "stable" and will drop while idling at a light.
What you need to do is reset your EFF to about 95% to start. Next fill up reset your average mpg and track it from there. You can fine tune the accuracy with your EFF setting if needed. I also recommend setting the ecograph to display your target mpg which is covered in the instructions.
Review the instructions again and please ask away here if there is something we can clarify or help you out with.
Once you figure it out I think you will be happy with it-there are a bunch of us here with ecometers and they are very liked from what I've seen.
Good luck!
R2
SD looks like you beat me to it and had it covered!
Thanks!
R2
Thanks!
R2
Garm, are you still selling these? I couldn't find them on your site...
Cheers! M2
Cheers! M2
Here in Europe Yaris have own computer which shows current xxl/100km, average consumption and average speed.
In USA versions do not have this?
In USA versions do not have this?
Nope; but the BMWs I had in Germany did...Originally Posted by Falconia ↑Here in Europe Yaris have own computer which shows current xxl/100km, average consumption and average speed.
In USA versions do not have this?
Thanks for explaining! :) I will have to play around with it, and today i kept it on Average MPG which I like better. I changed the EFF setting to 70 because at first it was reading too high. I guess i will change it to 95 and keep adjusting after fill ups. Is it safe to leave the ecometer plugged in and left in the car everyday? Its not going to be damaged due to the cold or heat right?Originally Posted by R2D2 ↑Twistoffate,
The instant mpg readings you reported are exactly what I would expect (and get on my own unit). The "instant" setting is exactly what it says-the fuel economy you are achieving that instant, updated every half second. It should read zero when stopped and the reason it can jump to 140-200+ mpg when you release the pedal is DFCO. I don't use the instant setting much as the ecograph around the perimeter of the display accomplishes the same task so I tend to stay on the avg mpg mode.
It sounds like what you want is the average mpg mode which will be more "stable" and will drop while idling at a light.
What you need to do is reset your EFF to about 95% to start. Next fill up reset your average mpg and track it from there. You can fine tune the accuracy with your EFF setting if needed. I also recommend setting the ecograph to display your target mpg which is covered in the instructions.
Review the instructions again and please ask away here if there is something we can clarify or help you out with.
Once you figure it out I think you will be happy with it-there are a bunch of us here with ecometers and they are very liked from what I've seen.
Good luck!
R2
i got it from auto store: Kragen, cost my 6 bucks, its sprays in as liquid but dries super fast, reminds me of rubbing alcohol. If i dont see the ecometer coinciding with actual like before i installed my AFE, ill just remove the afe and go stock to see whats up.Originally Posted by Sodium Duck ↑Hmm, interesting idea. Is the MAF sensor cleaner just compressed air to blow the crap off it, or is it something specific that you get at the auto parts store? Do we have only that one MAF sensor by the intake, or is there more than one on the car that would be worth cleaning?
Twistoffate,
You should be fine leaving it plugged in. Mine has been plugged in every day since I got it through heat and cold with no issues.
R2
You should be fine leaving it plugged in. Mine has been plugged in every day since I got it through heat and cold with no issues.
R2
but if you do unplug it, it saves the data to memory, so no worries there
Oooh! Just read this whole thread. I'm gonna have to get me one of these babies! :)
Got my Ecometer and had a great time trying it out yesterday -- was on the road most of the day so had plenty of opportunity. I really like it! I had no idea how much gas I was using doing certain things -- esp. how much difference it really DOES make to accellerate SLOOOWLY. I love seeing 200 mpg going down hills in DFCO! 👍
+1 . 👍
Okay it is official! I love this thing. I am still in my break in period (only 9,500 miles on car) and winter temperatures..and i am averaging 33-34 mpg. Pretty good considering i only do short trips everyday!
Okay, I know nothing about this autometer...is the cable permanently affixed to the gauge or can it be disconnected/unplugged? It would need to be able to unplug because of the way I would want to mount it if I purchased this.
...and I don't know if it's been mentioned yet because I didn't follow the whole thread but I see that it's cheaper than $52.00
http://www.jcwhitney.com/ecometer/p2...vz4osjhxl4TCB0
...and I don't know if it's been mentioned yet because I didn't follow the whole thread but I see that it's cheaper than $52.00
http://www.jcwhitney.com/ecometer/p2...vz4osjhxl4TCB0
yah it hooks into the OBD port.... plug and play bro. just mount it with something reusable and you should be fine.