Yarisworld Archive

So how 'bout that Ecometer by Auto meter?

283 posts · 90,128 views · page 4 of 6

Replies continued

ezhacker1Thread starterSan Francisco · Jul 23, 2009#151
im running on stock 15 steelies, i see that going 35 on 5th gear, gives like about 45-50 inst. mpg, i forget the numbers exactly, but wow huh? only thing is best i can manage from accelerating from stop is about mid 20s on the inst. heavy wheels the factor?
Sodium DuckWestern Mass. · Jul 23, 2009#152
Stock steelies are 14" fwiw. I can barely keep mine above 15MPG accelerating from a stop.
ezhacker1Thread starterSan Francisco · Jul 23, 2009#153
Originally Posted by Sodium Duck ↑
Stock steelies are 14" fwiw. I can barely keep mine above 15MPG accelerating from a stop.
my stock steelies are from the power package. so 15s.

for the first time i used nuetral instead of DFCO, it gives like about double the readout... hmm, it would either throw off the final avg at fill up or make for some interesting find.
Yaris HiltonBristol, Tennessee, USA · Jul 23, 2009#154
Yep. 15" steelies on all three of ours.
Sodium DuckWestern Mass. · Jul 23, 2009#155
I've noticed that as well with neutral. However, when I have used neutral in the past, I got worse gas mileage. I duno, it's odd. Everyone with a scangauge also said that when you shift into neutral your RPM's go higher -- this gauge says they go lower. ?
ezhacker1Thread starterSan Francisco · Jul 23, 2009#156
rpms are higher in DFCO, but fuel is "cutoff" like we get DFCO above 1100rpm, but when in neutral engine is just at idling speeds.

This is rather confusing no, DFCO or neutral?
Sodium DuckWestern Mass. · Jul 23, 2009#157
From what I've read on the forums from Scangauge people is that when you coast in neutral (not DFCO) your RPM's are higher than if you were in gear and coasting. That's what I'm talking about. But my Ecometer tells me the opposite.
daf62757Indianapolis, Indiana · Jul 24, 2009#158
If you disengage the clutch, the engine speed drops to idle, doesn't it? If you leave the clutch engaged, the engine has to match the gear which is linked to the speed of the vehicle.
talnlnkySpokane, Wa · Jul 24, 2009#159
I own a SG. to do DFCO you have to be 1200+ rpms. if you coast in neutral your rpm's will drop... maybe as low as 700... but from what I can tell, the slower you coast in neutral the lower the rpms, and the longer you coast in neutral the lower the rpms.

SG reports no gas being used when in DFCO. From what I can tell, using DFCO in short little burst, or long stretches (when going down hills) can do a lot to keep your mpg avg up high. coasting in DFCO for a few blocks can jump my average from mid 40's to high 40's on my 11 mile commute to/from work. I used to use coasting a lot... but I no longer think it is as good.

If coasting is better.... its only at certain times.... like when going fast (highway speeds) on slight downhill stretches where DFCO would slow your car down too much.

Using DFCO I've now got my commute to work and back to avg about 49-50mpg over the past two weeks. This tank i'm looking at 46mpg... 2 bars left and i've gone 400miles so far.I should be able to get 430miles before I hit the 1.6gal left mark.
QmobileHoytville, ohio · Jul 24, 2009#160
hmm I mite have to pick me up one now!! Mainly for the tach feature................hmm a lil drive down and on the way back experiance the thing and report back so tempting
gammarayTn · Jul 25, 2009#161
The amusement of the device alone has been worth it to me, and as stated earlier in the thread..... I wanted a tach, so that was just an added big bonus.
R2D2ME · Jul 25, 2009#162
Just thought I'd report again-I finally filled up again today (It happens so rarely I actually look forward to it!) and the ecometer avg mpg was within .71 mpg (41.3 pump vs 42 ecometer).

Again, which is more accurate? I'll take it!

R2
gammarayTn · Jul 25, 2009#163
As I stated earlier. Just remember to reset the gauge at each fill up and its very accurate. I also just reset on occasion to see what average I will get on a specific trip.
rihdrkcRI · Aug 2, 2009#164
After reading the posts on this, I had to have one. Received one as a B-day gift and installed it Thursday. I love this gauge so far and am on my first tank with it. I installed it on the steering column,and ran the cable down through the hole in the bottom to the OBD port. Five minute install.

1 attachment not included in this copy

gammarayTn · Aug 3, 2009#165
I skimped and bought cheaper fuel this time, and it shows on the gauge. Ive been running Chevron 87 since I bought the car, and on average mpg setting I was getting 34-36 readings with Chevron. With this cheaper fuel, I cant get it over 33, and have driven the car easier to beat it all. The top fuel bar even went down at 70 miles, instead of the usual 80 range.
RevssonSoutheast Wisconsin · Aug 4, 2009#166
Originally Posted by rihdrkc ↑
After reading the posts on this, I had to have one. Received one as a B-day gift and installed it Thursday. I love this gauge so far and am on my first tank with it. I installed it on the steering column,and ran the cable down through the hole in the bottom to the OBD port. Five minute install.
Did you use screws or velcro to mount it?
advocatelocation · Aug 4, 2009#167
Thanks a lot for the great in depth discussion and plentiful amounts of pictures. I look forward to getting one of these.
QmobileHoytville, ohio · Aug 4, 2009#168
ok that's it now I HAVE to have one!! I talked w/autozone and they herd of it but never seen one
Sodium DuckWestern Mass. · Aug 4, 2009#169
Order it offline. I posted a site way earlier in the discussion for like 57 shipped I believe.
talnlnkySpokane, Wa · Aug 4, 2009#170
Originally Posted by gammaray ↑
As I stated earlier. Just remember to reset the gauge at each fill up and its very accurate. I also just reset on occasion to see what average I will get on a specific trip.
I reset the A trip meter for gas tanks.. and the B trip meter for oil changes ... but you could do B for small trips if you didn't want to track the oil change mileage.
jaysizzleSeattle WA · Aug 4, 2009#171
i really dont want to read through all 10 pages of this thread...🆘
rihdrkcRI · Aug 4, 2009#173
Originally Posted by Revsson ↑
Did you use screws or velcro to mount it?
I used the included "velcro" and so far so good. I have some heavier hook and loop that I may try if the original stuff give up.
RevssonSoutheast Wisconsin · Aug 5, 2009#175
Originally Posted by jaysizzle ↑
i really dont want to read through all 10 pages of this thread...🆘
I hear ya, but sometimes it pays to read entire threads. 😛
Sodium DuckWestern Mass. · Aug 5, 2009#176
Yea. Build up some street cred yo. lol
QmobileHoytville, ohio · Aug 7, 2009#177
well I finally took a lil drive to JEGS today and got one. And I have to say this: I LOVE THIS THING!!!!! I was playing with it on the way back and the MPGs stay right 'round 45-50 so I'm giving it the Q seal of approval👍 Now all's I need to do is figure out how to mount this sucker.
Sodium DuckWestern Mass. · Aug 8, 2009#178
I'm not getting how to reset the average MPG. I go to average MPG and try all combinations of pushing buttons but all I can get it to do is change the display brightness. What am I doing wrong?
ezhacker1Thread starterSan Francisco · Aug 8, 2009#179
Originally Posted by Sodium Duck ↑
I'm not getting how to reset the average MPG. I go to average MPG and try all combinations of pushing buttons but all I can get it to do is change the display brightness. What am I doing wrong?
you hold the right button when in avg mpg mode till it resets.
QmobileHoytville, ohio · Aug 8, 2009#180
ok I've got a spot where I want to mount it on the steering colum(ala rihdrkc) so I can still use the storage box and steer without issues, plus it'll look awsome IMO. Right now I have it sittin in the cupholder, nice place but not exactly practical :( The velcro type stuff did'nt exactly work out, and I REALLY don't want to use the screws it came with, any ideas? Gauge pod would just look stupid/ricey and a guy at advanced auto parts sadi something about a HUGE hose clamp again not exactly a good way IMO. Would a peice of velcro acrossed the base be good enough? I want ot be able(if I get rid of the car) to make it look like there was nothing there
rihdrkcRI · Aug 9, 2009#181
ok I've got a spot where I want to mount it on the steering colum(ala rihdrkc) so I can still use the storage box and steer without issues, plus it'll look awsome IMO. Right now I have it sittin in the cupholder, nice place but not exactly practical :( The velcro type stuff did'nt exactly work out, and I REALLY don't want to use the screws it came with, any ideas? Gauge pod would just look stupid/ricey and a guy at advanced auto parts sadi something about a HUGE hose clamp again not exactly a good way IMO. Would a peice of velcro acrossed the base be good enough? I want ot be able(if I get rid of the car) to make it look like there was nothing there


Go to Target and buy yourself some heavy duty hook and loop material. Made by 3M. Looks like velcro that came with gauge, but much more durable. It comes in black or clear. I have used it to secure things on my bike(a vibrating Harley) and it has never failed me. Will be switching to it on the Ecometer when I get a chance. The stock stuff is a little flimsy, but working so far.
QmobileHoytville, ohio · Aug 9, 2009#182
ok I mite look into wal-mart or meijer(target too far away). thanx man!!
rihdrkcRI · Aug 9, 2009#183
Hardware store might have it also.
Twistoffate0817Voorhees, NJ · Aug 10, 2009#184
I really want to get this product. How accurate is this?
QmobileHoytville, ohio · Aug 10, 2009#185
from what I've seen pretty darn
R2D2ME · Aug 10, 2009#186
Mine has always been within .2-.7 mpg. Today after fillup it was within .3 mpg of the "pump method" calculation.

Plenty accurate, user friendly and fun little tool to save fuel! If something happened to mine I'd have another by the end of the week!

R2
DevilGirlLehigh Valley, PA · Aug 11, 2009#187
Can anyone who has one of these tell me if, when viewing it in the "rpm" mode, if the "analog" style meter shows the rpm's as well, or if it is only the mpg's it will do that with (saw the you tube vid of someone from mpg-o-matic doing a test drive of a charger/challenger, can't remember which). I'm really looking at one of these so I can have a tach but also the mpg readout. I like the old school analog tachs better than the digital ones.
RevssonSoutheast Wisconsin · Aug 11, 2009#188
I agree with you DevilGirl.
It would be nice if you could set the outer LED ring to act like an analog tach while
having the digital readout show mpg.
I gathered, from that same video you saw, that it wouldn't work like we
wanted it to.

Maybe CTScott could mod it? 🤷
DevilGirlLehigh Valley, PA · Aug 11, 2009#189
That would be a nice mod for it.

But I was referring to when you are viewing it showing rpm's (like it says you can on the website, even though all the pics only show mpg's), if it is only the digital readout or if it is also the LED ring. If it's both while in that "mode", I'd get it. I can always press a button and find out the mpg's. I'm more concerned with the rpm's right now until I get more used to driving stick every day (this is my first stick shift car). Though I must say, I am getting better. Only two days of my commute put on the car, and stalled once yesterday mornin, once yesterday afternoon, and not at all this morning.
QmobileHoytville, ohio · Aug 11, 2009#190
yeah in RPM mode it shows you by light/numbers what your doing also I've found that in speedo mode/mph it's a lil SLOWER than the stock speedo is'nt that nutty?
Sodium DuckWestern Mass. · Aug 11, 2009#191
I'd bank that the Ecometer is more accurate than the speedometer. When viewing the speedometer, you should actually add 2 or so MPH, because we are looking at it from an angle since it is in the middle. If you were to look at it straight on fromt he center of the vehicle, it would be accurate. For example, from the drivers seat when I think I am doing 30MPH and the needle is dead on it, if I lean over to the middle and look, I'm actually doing about 28MPH.

However, at "10MPH" on the speedometer, the Ecometer reads about 14MPH. I trust the Ecometer better. Above 20MPH, they seem to be the same. (at my work the speed limit is 15MPH and they are really anal about it)
daf62757Indianapolis, Indiana · Aug 11, 2009#192
I use my Tom Tom for a speedometer.
DevilGirlLehigh Valley, PA · Aug 12, 2009#193
Yet another question in the search for a tach for my 09... I like the idea that the Scan Gauge gives you a lot more output for the car (mostly standard stuff that I'm used to seeing on a gauge cluster), but I'm concerned about the size of the readout. 5" wide by only 1 1/2" tall? That seems small to me. Is there possibly a similar model that has a larger readout?
Woody_WoodchuckWake Forest, NC · Aug 12, 2009#194
I thought the same thing, especially with having 4 gauges displayed at the same time. It is easy to read at a glance and I have not had troubles looking at one gauge and reading it.

The problem is it only updates every… 2 seconds I believe, in fast mode so you are not getting all the readings. Best bet for a functional tachometer is to buy a dial one. The SG suffices to check the rpm’s while crusing.
DevilGirlLehigh Valley, PA · Aug 12, 2009#195
Originally Posted by Woody_Woodchuck ↑
I thought the same thing, especially with having 4 gauges displayed at the same time. It is easy to read at a glance and I have not had troubles looking at one gauge and reading it.

The problem is it only updates every… 2 seconds I believe, in fast mode so you are not getting all the readings. Best bet for a functional tachometer is to buy a dial one. The SG suffices to check the rpm’s while crusing.
A dial tach would be a better bet for me, but then I'd have to drill holes. Not something I want to do at the moment. Plus I like the option of having the other information (MPG usage and all others available)... I'm at such a loss for what I want. I don't want to spend the money on something I won't like after a short period of time. And I doubt I can find a dial tach that won't require making extra holes...
R2D2ME · Aug 12, 2009#196
DevilGirl,

I'd recommend the Ecometer if you want an easy to install tach-it's easy to see, easy to install, non permanent and fairly inexpensive. I think it works very well. The major reason I bought mine was for the tach but I'm so hooked on the instantaneous mpg that's all I usually use! You still can see the ecograph with the tach though. If it's not to your liking I bet you can find someone to buy it!

R2
gammarayTn · Aug 12, 2009#197
I still find this gauge very amusing, and so does everyone that gets in the vehicle with me. Unless it fails to work at all anytime soon...its the best purchase Ive made in a very long time. Well, besides the Yaris that is.
QmobileHoytville, ohio · Aug 12, 2009#198
me 2 when I was on my way home from Jegs I was like chewing people out b/c I was get 50mpg AND still going th speed limit........that was a fun drive kinda long but fun
wingdoodAlexandria, VA · Aug 15, 2009#199
Originally Posted by Woody_Woodchuck ↑
I thought the same thing, especially with having 4 gauges displayed at the same time. It is easy to read at a glance and I have not had troubles looking at one gauge and reading it.

The problem is it only updates every… 2 seconds I believe, in fast mode so you are not getting all the readings. Best bet for a functional tachometer is to buy a dial one. The SG suffices to check the rpm’s while crusing.
does anyone know if the Ecometer's tach updates slower or faster than the Scangauge's? 😕
Henry G.So Cal. · Aug 18, 2009#200
Scangauge updates every 1/2 second in fast mode, pretty darn good. Its way more product for the money IMO.