Yarisworld Archive

So how 'bout that Ecometer by Auto meter?

283 posts · 90,128 views · page 2 of 6

Replies continued

YarisSedanCalifornia - Bay Area · Jun 19, 2009#51
Actually scratch my last post i was sitting at a stop light watching my adverage mpg it was at 37.2 and then it just dropped to 37.1 so i guess it takes into account all the times you are not moving as well. Pretty acurate then.
ezhacker1Thread starterSan Francisco · Jun 19, 2009#52
so its close enough to calculation at fillup then?
ezhacker1Thread starterSan Francisco · Jun 21, 2009#54
ill get this very soon, but still want to see what owners say about the accuracy at fill up for mpg. Im glad i didnt get that kiwi mpg tho... ;)
YarisSedanCalifornia - Bay Area · Jun 21, 2009#55
I am starting to really love my ecometer. My adverage mpg is 39 this time and i do more of a 70 percent traffic stop and go commute and 30 percent freeway. The best i have ever had in my car in the whole 15k miles ive owned it. I find myself looking at it less and less now as my foot is trained to just lightly feather the gas pedal. Only thing the slight feathering is really putting a strain on the heel of my foot at times. I think cause there is hardly a counterweight you need almost float you foot on top of the pedal with no pressure.
toastNappanee, IN · Jun 21, 2009#56
Just did my first tank fillup since installing the ecometer. The gauge said avg mpg was 40. Actual mpg was 39.7. Amazingly close for out of the box. I'll have to keep an eye on it, but you can adjust the calibration if you find it's running too high or too low. It will just take me a while as I don't put too many miles on in a week.
ezhacker1Thread starterSan Francisco · Jun 21, 2009#57
im totally sold on it then
CosworthMI · Jun 22, 2009#58
Well, still haven't received my ecometer. I ordered it from Phantasm on Wed (6/17). They said it was in stock at the time when I called. Now, they tell me they just got them in today (6/22/Mon). So, I probably won't get it until this weekend. This blows!
Sodium DuckWestern Mass. · Jun 23, 2009#59
Mine will be here on the 29th! Yippy Skippy.
bronsinnj · Jun 23, 2009#60
It would be interesting to see the contrast between cruise control and foot power cruising on the interstate at the same 75 mph.
gammarayTn · Jun 24, 2009#61
Hey all, didnt go through the intro board. My first post. Actually been through so many, with so many vehicles....just had to pass. Anyway, bought an 09 Yaris, and installed this gauge. Love it. Without a doubt this thing will pay for itself soon. Gas mileage on this car is insane....by the way. 👍
gokartrideTexas · Jun 25, 2009#62
Any favorite mounting locations that are easy??? I'd like to be able to remove the gauge from my car from time to time. Why??? Well, after hypermiling for the past two years in my previous car (and seeing 42-46 mpg in city driving) it sometimes just gets exhausting being "on" all the time. I think I'd prefer to check in w/ the gauge every so often and then remove it, although having that gauge present really does help keep one focussed.
daf62757Indianapolis, Indiana · Jun 25, 2009#63
Got mine today...sort of a self birthday present to myself. Hooked up easy enough. My only question is, how do you mount it? It has a open bottom...at least mint did, and nothing to mount it on. Where there supposed to be a base that came with it? There wasn't one in the box.

I am very suprised at the difference my old driving habits have on this gauge. I just drove to the store and there is an education in using this gauge. Today is the first day for the rest of my life!
R2D2ME · Jun 25, 2009#64
Gokartride,

I really like having the ecometer on the A post. A quick glance left from my normal sight path allows me to view the gauge easily. Also, after you plug the unit in you can quickly tuck the wire behind the door trim for a clean install. The industrial fasteners shipped with the unit are like plastic velcro and you can remove the unit easily.

R2
R2D2ME · Jun 25, 2009#65
Daf62757,

There should be two small rectangular shaped pieces of industrial fastener in the box. Place one half of the fastener on the small rectangular platform inside the hollow area of the base on the ecometer, and the other on the vehicle where you wish to mount the unit (after cleaning the surface with alcohol). There should also be a trim ring that fits around the perimeter of the ecometer base that conforms to the surface the ecometer is mated to- this gives a nice "flush" appearance. Then just join the fasteners by lining them up and pressing the ecometer firmly to seat them. Mine has held very well.

Hope this helps!

R2
gokartrideTexas · Jun 25, 2009#66
Good to know...thnx!! I may hafta get me one of these someday!!!
gammarayTn · Jun 25, 2009#67
Originally Posted by gokartride ↑
Any favorite mounting locations that are easy??? I'd like to be able to remove the gauge from my car from time to time. Why??? Well, after hypermiling for the past two years in my previous car (and seeing 42-46 mpg in city driving) it sometimes just gets exhausting being "on" all the time. I think I'd prefer to check in w/ the gauge every so often and then remove it, although having that gauge present really does help keep one focussed.
I mounted mine just a bit to the right and slightly behind the driver dash vent behind the cupholder. It is angled toward the center point of my body. This position leaves very little wire exposure as well. Maybe I can get a pic soon. And you can remove it at any time, you will just have to look at a small rectangle adhesive base.
gammarayTn · Jun 25, 2009#68
Originally Posted by gammaray ↑
I mounted mine just a bit to the right and slightly behind the driver dash vent behind the cupholder. It is angled toward the center point of my body. This position leaves very little wire exposure as well. Maybe I can get a pic soon. And you can remove it at any time, you will just have to look at a small rectangle adhesive base.
Pic.

1 attachment not included in this copy

gokartrideTexas · Jun 26, 2009#69
I'm wondering if...for perodic use...one could use something like one of those foam cup inserts and mount it directly in the driver's side cup holder. This way it could be removed from the car easily. Does the process for plugging it into the OBDII port make this approach impractical? I wore myself out hypermiling in my last car, but I would like to check now and again.
daf62757Indianapolis, Indiana · Jun 26, 2009#70
Originally Posted by gokartride ↑
I'm wondering if...for perodic use...one could use something like one of those foam cup inserts and mount it directly in the driver's side cup holder. This way it could be removed from the car easily. Does the process for plugging it into the OBDII port make this approach impractical? I wore myself out hypermiling in my last car, but I would like to check now and again.
You could do that. I remember one guy put his GPS unit on a stack of hockey pucks and then used the cup holder so what you are suggesting would be about the same concept.
daf62757Indianapolis, Indiana · Jun 27, 2009#71
The more I use the ecogauge, the more I starting to realize what factors come into helping with better gas mileage.

First, hills take away from gas mileage while flat ground greatly aids in higher mileage. The cruise control also costs more gas...but mainly when climbing slight hills over a long distance.

It all appears to be a trade off of one over another. You can go fast and get OK mileage, but much better mileage without the air or cruise. You can get super mileage downhill, but it helps to disengage the cruise and "feather" the car down the hill.

This is a wild device. I am really happy I got it and it has already changed my driving habits!
R2D2ME · Jun 27, 2009#72
Dave,

I agree this is a great tool-I am very pleased with my purchase as well.

My compliments to Auto Meter for producing such an effective, economical, and user friendly device.

R2
gammarayTn · Jun 27, 2009#73
Agreed. Great purchase. I really enjoy it.
CosworthMI · Jun 29, 2009#74
I got mine on Friday... just in time for a long-distance trip over the weekend.

With the ecometer, I was able to get 51.43 mpg over 320 mi (95% hwy/5% "city"... hwy cruising speed was 75% @ 55-65 mph, 25% @ 65-75 mph). A/C on for 80% of the trip (off when going up hills).

This device let me better gauge when to go easy on the accelerator.

👍👍 Good stuff.
ezhacker1Thread starterSan Francisco · Jun 29, 2009#75
just got mine yesterday, damn Fedex guy threw it over our fence and didnt ring the doorbell or anything. i put 40 miles of freeway on the tank before i plugged it tho. I learned alot in the 40 minutes of city driving of today. I wish you didnt have to cycle through the gauges and instead go left or right to them. Cant wait to fill up.
R2D2ME · Jun 29, 2009#76
Glad you guys got em.

Cosworth, nice numbers. Were you able to compare the ecometer's avg mpg to "an old fashioned" calculation at fill up? Just curious how close it was. TIA

R2
Sodium DuckWestern Mass. · Jun 29, 2009#77
Temporarily mounted mine behind the steering wheel, but in front of the glove box on the steering wheel shroud. It's nice, but I don't like how obstructed it gets while the wheel is turned. I think I may screw it to the side/toppish of the gauge cluster.

Very awesome thing to have, I just pounded the streets for five minutes with it and love it.
ezhacker1Thread starterSan Francisco · Jun 30, 2009#78
you guys notice the lag time, from when the car is stopped till the gauge reads 0 inst. mpg? like a few seconds for me. I wonder how instantaneous it really is to how you move your foot.
Sodium DuckWestern Mass. · Jun 30, 2009#79
I don't notice any lag time -- at least not seconds long.
CosworthMI · Jun 30, 2009#80
The meter actually underestimated the average mpg (meter read ~49.x mpg). However, I need to stick to one gas pump (at a gas station) to really see where the difference might come from.

-SC

Originally Posted by R2D2 ↑
Glad you guys got em.

Cosworth, nice numbers. Were you able to compare the ecometer's avg mpg to "an old fashioned" calculation at fill up? Just curious how close it was. TIA

R2
R2D2ME · Jun 30, 2009#81
Originally Posted by Cosworth ↑
The meter actually underestimated the average mpg (meter read ~49.x mpg). However, I need to stick to one gas pump (at a gas station) to really see where the difference might come from.

-SC
Nice! I agree-the meter gets close enough that is makes you wonder which is more accurate, the pump method or the meter.

ezhacker,

I've noticed it sometimes takes a couple of seconds to register when I first start driving, but have not noticed any lag time after that. I'll keep a closer eye for it here in the next few days.

R2
daf62757Indianapolis, Indiana · Jun 30, 2009#82
Originally Posted by ezhacker1 ↑
you guys notice the lag time, from when the car is stopped till the gauge reads 0 inst. mpg? like a few seconds for me. I wonder how instantaneous it really is to how you move your foot.
Maybe a second or two tops to get down to 0. I would say it is just your brain processing every number that is displayed as it gets down. And of course, the higher the instantaneous MPG number is, the longer it takes to get to 0.
ezhacker1Thread starterSan Francisco · Jun 30, 2009#83
the numbers in inst. mpg doesnt refresh THAT fast, lol. id say it takes 1.5-2 seconds for it to reach 0 after a complete stop.

i also noticed that in DFCO if you put your foot on the accel. pedal just slightly it keeps it in DFCO, or close to it, meter reads way above 40s. Actually i thought DFCO would change the avg. mpg. higher alot faster. But i guess it balances out when accelerating from stop is like 10mpg or whatever low number going lightly.
Sodium DuckWestern Mass. · Jun 30, 2009#84
Actually, mine does lag when I first turn the car on. It doesn't start reading until a second or two later.

Did anyone else feel the need to notch out the area around the OBDII port? I cut a little piece of plastic out and now the cabel isn't wedged up in there.
ezhacker1Thread starterSan Francisco · Jul 4, 2009#85
i just got 44.52mpg driving 10-15% city, rest highway. Not a tank fill because i really wanted to see what it would be on a long distance run of 70miles highway. (first time long distance on freeway ever so i cant comment on before) Ecometer read 45.2 avg, so just about a 1.5% overestimate, but i only put in 2.566gal so there you go.

i am soooo happy, great little meter.
R2D2ME · Jul 9, 2009#86
I finally got to fill up again today. Traveled 398.2 mi and took 9.703 gal to fill up for an avg of 41.03 mpg! The ecometer avg read 41.2 so it's right there. It is probably more accurate than calculating at the pump.

What's remarkable to me is this is my best tank yet and I had no longish trips on this fill. I had a single trip of 15 mi on this tank and all others were 10 mi or less of rural/city driving. It was also raining most of the time. I used only basic/moderate hypermiling techniques.

I love this little car and the ecometer makes it even better!

R2
aclark246RI · Jul 9, 2009#87
I know it could be apples and oranges, but does anyone have both a scangauge and the ecometer? Just for comparison sake performance-wise. I know the ecometer is more inexpensive and looks more stylish, but I'm curious about side-by side performance.
Sodium DuckWestern Mass. · Jul 9, 2009#88
My ecometer read 44.2MPG, my calculation was 42.88. *shrug*
cali yarisCanoga Park, CA · Jul 9, 2009#89
I think everyone forgot I'm an Autometer dealer and can beat other's pricing. 😢

Is the best price out there still about $80 shipped?

anyways.... I have two in stock. 👍
R2D2ME · Jul 9, 2009#90
Sorry, Cali I would have bought from you if I had realized you sold them!

R2
JustAnotherAsianmilpitas / santa rosa · Jul 9, 2009#91
Originally Posted by cali yaris ↑
I think everyone forgot I'm an Autometer dealer and can beat other's pricing. 😢

Is the best price out there still about $80 shipped?

anyways.... I have two in stock. 👍
no yaris here up till now, but i knew sticking around would be beneficial! 👍

i'm seeing $69.99 as the median through other reputable vendors (i.e. summit racing), and $59.99 to $69.99 through some shady ebay vendors. this is all sans shipping, so i guess the real median is $80 like you said. so "how low can you go?" haha.
RevssonSoutheast Wisconsin · Jul 10, 2009#93
Originally Posted by aclark246 ↑
I know it could be apples and oranges, but does anyone have both a scangauge and the ecometer? Just for comparison sake performance-wise. I know the ecometer is more inexpensive and looks more stylish, but I'm curious about side-by side performance.
Wouldn't you need a special adapter to be able to plug both of them in
at the same time? 🤷

Or are you meaning that one at a time but someone owning both? 😕

(I'm a little slow sometimes) 😳
aclark246RI · Jul 10, 2009#94
Originally Posted by Revsson ↑
Wouldn't you need a special adapter to be able to plug both of them in
at the same time? 🤷

Or are you meaning that one at a time but someone owning both? 😕

(I'm a little slow sometimes) 😳
Someone owning both but one at a time. So I guess not side by side haha I didn't think of that... but you get what I mean.
ellenbettyStow Ohio · Jul 10, 2009#96
Where is the Ecometer made? A quick check on Summit Racing web site lists a meter I have not heard anything about. Called the Bully Dog Watch Dog Monitors. Also missing information where the monitor is made. In the $250+ range. Available in black and white face. The Bully Dog is a programmable type display.
JustAnotherAsianmilpitas / santa rosa · Jul 13, 2009#97
Originally Posted by aclark246 ↑
Someone owning both but one at a time. So I guess not side by side haha I didn't think of that... but you get what I mean.
but one could do so if i'm not mistaken. if i remember correctly, there are y-adapters (or splitters), for the obd-II port. on the other hand, there are signal/distortion/noise issues involved.

http://www.mp3car.com/vbulletin/engi...-splitter.html
^talk about the obd-II splitters, and the signal issues.

http://www.obd2cables.com/products/
^source for "splitter".

edit: caliyaris- so is $67.83 shipped the price to beat then?

edit#2: since the bullydog watchdog was brought up... i duno about that monitor. it seems like something that can look like a portable gps, or in other words, something inviting for thieves. i'm trying to avoid that without putting the device away everytime i park.
CosworthMI · Jul 13, 2009#98
Originally Posted by ellenbetty ↑
Where is the Ecometer made?
Thanks, R2D2!
R2D2ME · Jul 13, 2009#99
Originally Posted by Cosworth ↑
I recall that it is made in Indiana. I will double check the box that it came in later today.
My instruction sheet says it's made in Sycamore, Illinois.

LOL. I never would have believed as a teenager that one day I'd own a Japenese car outfitted with American electronics!
daf62757Indianapolis, Indiana · Jul 13, 2009#100
Originally Posted by R2D2 ↑
My instruction sheet says it's made in Sycamore, Illinois.

LOL. I never would have believed as a teenager that one day I'd own a Japenese car outfitted with American electronics!
What comes around goes around!