cali yarisOriginal postCanoga Park, CA · Apr 7, 2009#1Blitz needs to know a few things to help us out with the issues some supercharger owner are experiencing. There seem to be a few issues -- overboosting, lean condition and knocking/pinging.
Please describe your symptoms (and please post with information about your set up and mods if you are NOT experiencing any problems).
We are working to have them provide several fuel maps to test out. I will require a local test car, and this may involve some dyno pulls, but there will be no expense to the owner.
Boost Pressure Issue
1: Boost Pressure you have reported was over 7psi, does the pressure stay at 7psi consistent or go up and down ?
Knocking Issue
A: What Gas octane are Supercharger customers using ?
B: Does knocking occur using Stock Air Box or aftermarket Air intake system? Does it occur with one octane but not with a higher octane? Please describe.
C. Please list any other engine modifications besides the Blitz system.
ok - thanks guys, we will continue to try to facilitate a solution for you.
Replies 150
kurokoma-kunmy own little world · Apr 7, 2009#2 Originally Posted by
cali yaris ↑ Knocking Issue
A: What Gas octane are Supercharger customers using ?
B: Does knocking occur using Stock Air Box or aftermarket Air intake system? Does it occur with one octane but not with a higher octane? Please describe.
C. Please list any other engine modifications besides the Blitz system.
From the beginning I've been using 93 octane from BP. I got the knocking under heavy acceleration, and usually only the first time after warmup. Several weeks ago I started adding lucas oil octane booster, which is the only thing that prevents the knocking, though I haven't tried a tank without it yet.
My other mods are AEM cai, DC sports header, Nitto midpipe, Tanabe concept g exhaust, NST lite crank pulley, NGK 7 heat range spark plugs
Thank you Garm! 🙂 Sorry I can't help with the AFR and boost pressures (still no gauges 😳). Like Yaris Tsport I am still thrilled with the overall results, worth every bit of effort
PETERPOOPOahu · Apr 7, 2009#3Mods: aFe Intake, NST crank/WT/ALT pulleys, NGK spark plugs, Megan header, 2.25" mandrel bent exhaust from the header back, hi flow cat, 18" resonator, 2.25"dynomax super turbo muffler
No knocking/pinging/pre-ignition. I use shell and 76's 92 octane. I also add lucas oil octane booster from day one.
My A/F readings from the dyno showed that I ran lean. I don't have a boost gauge to read my boost, nor a wideband to show a/f.
*I will be going to the dyno tomorrow (dynojet), and hopefully get some pulls in. I have a scangauge now so I will show my a/f readings with ignition timing and hopefully they can hook up a line to my boost/vacuum nipple while on the dyno to show the boost.
ps: thanks garm for taking the time to work with blitz on figuiring this out!
LtNoogieWest Hills, CA · Apr 7, 2009#4 Originally Posted by
cali yaris ↑ Please describe your symptoms (and please post with information about your set up and mods if you are NOT experiencing any problems).
Boost Pressure Issue
1: Boost Pressure you have reported was over 7psi, does the pressure stay at 7psi consistent or go up and down ?
Knocking Issue
A: What Gas octane are Supercharger customers using ?
B: Does knocking occur using Stock Air Box or aftermarket Air intake system? Does it occur with one octane but not with a higher octane? Please describe.
C. Please list any other engine modifications besides the Blitz system.
Thanks Garm.
My engine mods:
aFe intake
Blitz S/C
Megan 4-1 header
TRD exhaust
NST Pulley Set
1. Boost pressure max's out at about 7 psi. I run the same Autometer AFR gauge that Camelll uses.
A. Shell V-Power 91 Octane. No pre-ignition. No octane booster used
B. n/a
C. aFe intake, Blitz S/C, Megan 4-1 header, TRD exhaust, NST Pulley Set, NGK Iridium heat range 7 spark plugs, MicroImage sticker
AFR measures 14.7 to 14.9 at WOT with boost.
dallasCanada · Apr 7, 2009#5Great thread 👍, more RD makes me seriously consider this over going the turbo route. Blitz should do a tune for a intake, header and exhaust as most people power hungy enough to buy a supercharger, will also install these items, if they don't have them on already. We all know there is never enough power.
cali yarisThread starterCanoga Park, CA · Apr 8, 2009#6Can anyone besides Camelll confirm overboosting?
YarisSedanCalifornia - Bay Area · Apr 8, 2009#7 Originally Posted by Yaris T-Sport ↑
my mods are Blitz SUS POWER air intake, NGK BKR7EIX, Greddy Tic Exhaust with silencer on full time, NST full pulley kit (not under drive), big throttle body (installed about two month after the sc installed
I had my kit for three month now, I have had ping/knock problem from the first day with 91 oct all the time regardless of what kinda brand of gas, I have tried them all, and they all ping and knock but I stick with shell and mobil 1 anyway since then, about two weeks since day one I have been using Lucas octane booster every fill up with 91 octane either shell, or mobil 1, this took away the ping and knock, but just about a week ago, I fill up with shell 91 with out any octane booster just too see if anything has changed, and it did, I now only run with 91 octane either shell or mobil 1 with out any octane booster, my car does not ping or knock anymore, I don't know the reason why it stop ping/knock, but I'm just happy that I can just fill up at the pump with out any octane boosters to boost. My car is running great and very reliable, I don't know the AF reading nor the HP output cuz I havent dyno it yet, I will do so when I get flywheel and cluth, the car is running great and trouble free, specially now I can just fill up at the pump and boost full time with out ping /knock, it doesn't seen to be running lean, over heating, or anything, it runs like a Champ, I'm not worry about anything, very happy with the kit, it is worth every penny. can't be any happier with this kit now.
What brand gas were u using before. You could have had excessive carbon buildup on top of the pistons enough to displace the combustion chamber enough to change the compression ratio to require you to need sligher higher octane. The continouse use of fuel injector cleaning probally cleaned the engine completely spotless to the point you no longer require that higher octane so now you no longer get a engine ping. I am thinking that the blitz SC kit runs so close to the verge of engine ping. This is why some people ping and some people do not without the aid of octane booster.
I would suggest those who experience pinging try a top engine cleaner such as seafoam through the intake manifold to remove all carbon buildup on the valves and on top of pistons. And then see if the engine still pings. Chances are it will make it better if not remove the pinging all together.
Just a thought.
YarisSedanCalifornia - Bay Area · Apr 8, 2009#8 Originally Posted by
dallas ↑ Great thread 👍, more RD makes me seriously consider this over going the turbo route. Blitz should do a tune for a intake, header and exhaust as most people power hungy enough to buy a supercharger, will also install these items, if they don't have them on already. We all know there is never enough power.
I agree with you. I think most people who install the S/C already have extensive mods. Since the S/C is usually last on thier list. Since if you dump several grand into mods such as intake, pulleys, exhaust, headers, high flow cat, etc. You end up with the same result in power 15-20hp as the sc stand alone would do. Not to mention you dont have to run higher octance gas and you probally still have a grand or 2 in your pocket leftoever.
staypuftchicago · Apr 8, 2009#9mods: fujita cai, tanabe touring medallion exhaust, nst pulley set, ngk bk7 plugs, perrin oil catch can if that matters.
been running bp or shell 91 octane since i got the sc. i dont know if you would call it a knocking but when i gun it in 2nd after i hit 50 it feels like it studders so i shift into 3rd, that just started lately so i shift, i dont have any other gauge to test whats goes on during that period, will try that octane booster and see if that goes away, i love the sc and enjoy it on the highway when i can.
LtNoogieWest Hills, CA · Apr 8, 2009#10Shouldn't be.
PETERPOOPOahu · Apr 8, 2009#11Ok, I got good news and I got bad news. I went to the dyno jet today and I made the most WHP any blitz owner has made so far. 133.06whp and 133.22 torque. However, I have the highest A/F readings than anyone too! haha. I dont know why I am laughing. This actually is pretty lame. They only did one pull and saw my crazy AFR and refused to do anymore. Everyone gathered at the dyno place and was outraged by the AFR. They couldn't believe blitz would sell a kit that put down 18-19 af readings. They were also surprised that is was not misfiring. I was rated at 8 pounds of boost during my pull. I am pretty mad at blitz right now.
ps: I could have probably made higher HP numbers if I did my other two runs! ;)
I really hope blitz can put a stop to this...
Here is my dyno chart from today...
Picture not included in this copy
Here is my old AFR dyno reading from a DynaPack dyno.
Picture not included in this copy
Only different thing that I did between my two seperate dyno runs were I put a hi flow cat on a changed my muffler.
cali yarisThread starterCanoga Park, CA · Apr 8, 2009#12+1. Pretty weird to be that different from one place to the next. How were they reading A/F exactly?
I'm willing to bet that Blitz designed this kit to be bolted onto a STOCK yaris, especially the airbox.
Is ANYONE running this kit on an otherwise stock Yaris?
If you add a bolt-on boost kit to an already modified car, you might not be using it as intended. Nice of Blitz to take a look at your modified setups and try to help out.
PETERPOOPOahu · Apr 8, 2009#13 Originally Posted by Yaris T-Sport ↑
I don't understand how one dyno reads that you are running too lean, and the other reads you are running too rich with out any tunning between the two dyno, there's obvious something not right about these dyno
readings, if your car is running like a champ, I wouldn't worry so much about these inconsistent AF readings, however I will take the 133 WHP as a new record for the Blitz Kit👍
Well both of my dyno readings are saying that I am LEAN, and not rich. Ideally I should be in the 11-12 range. My old dyno was 13-14 and my one from today is like 18-19!
However, like you said, my car IS running fine. No misfiring (like the dyno tech would thought be happening) and everything seems normal. If it wasn't for the dyno, I would be oblivious to all of this. For now, to be safe, I am going to be running with the compressor set to "off."
I am REALLLLLLLLYYY hoping blitz can make a new fuel map to take into consideration all of the other aftermarket mods MOST blitz owners have installed in their car already.
If they do make a new fuel controller and that doesn't fix it. I am going to have to throw down some $$$ to have someone tune this thing. I talked to a tuner at that shop and he is supposedly one of hawaii's best. He said he is confident he could tune it if we got rid of the fuel controller and used either the AEM FIC, Greddy Ultimate, or the F-Con (sp?). But he said that would cost me. Not too excited about that idea
I hope blitz can pull through for us! 😢
Originally Posted by
cali yaris ↑ +1. Pretty weird to be that different from one place to the next. How were they reading A/F exactly?
Well they were two different dynos. First one was a dynapack and the one from today was a dynojet. The dynapack was saying I had only 107 whp and 95 trq. The dynojet is saying i have 133whp and 133trq. So I would think the dynapack's A/F readings wouldn't be as high either. So if you put that into consideration, then it might have been the same before too.
They hooked up a sensor to the end of my tailpipe while I was at the dynapack AND dynojet.
ztrack157Biggs, CA · Apr 8, 2009#14I know this is for blitz owner but I am starting to wonder if Blitz did any R&D on their piggy back for the US yaris or if they just included a xB or Japanese yaris piggyback in the kit.
LtNoogieWest Hills, CA · Apr 8, 2009#15Peter, you need an A/F gauge. If you're measuring 18-19 regularly under boost, soon, one of your videos will sound like...VROOOOMM POP! putt putt putt pffffffff.
PETERPOOPOahu · Apr 8, 2009#16haha, I know I need a A/F gauge ASAP. but no vrooom pop putt putt here. Compressor will be set to "off" until everything is figuired out. Until then, the number "133" is my new favorite number! ;)
LtNoogieWest Hills, CA · Apr 8, 2009#17Those numbers are more in line with what I expected. Get a vacuum/boost gauge while you are at it.
whooppee777Maryland · Apr 8, 2009#18Mods- AEM Cold Air Intake, NST Light Weight Pulleys (set), 1ZZ Throttle Body w/Spacer, Weapon R Header, Nitto Midpipe, Tanabe Medallion Touring Axel Back Exhaust
I use 93 Premium Octane from whichever gas station i am closest to when i run out. and Autolite spark plugs that are 2 steps colder than stock.
i havent had any dyno pulls yet but my wideband a/f ratio gauge shows normal readings around 12 at WOT.
boost reading show anywhere from 7 to 9 pounds of boost
WHEN I TOOK MY PVC HOSE OFF THE INTAKE MANIFOLD IT WAS DUMPING WAY TOO MUCH OIL INTO THE MANIFOLD.
going to invest in an oil catch can very soon
PETERPOOPOahu · Apr 8, 2009#19 Originally Posted by
LtNoogie ↑ Those numbers are more in line with what I expected. Get a vacuum/boost gauge while you are at it.
I am getting an autometer cobalt series boost/vacuum, oil pressure, and wideband a/f.
cali yarisThread starterCanoga Park, CA · Apr 8, 2009#20Blitz did do R & D, and many USA owners are enjoying their extra power without issues. The weird thing is that the people experiencing problems are all having slightly DIFFERENT results. No pattern, really -- unless you see one I can't see? What I do see is that the blitz kit was added to modified cars in every case.
Unless there is variability in the fuel controller from unit to unit (unlikely) or there is variability in the install and mistakes were made (also unlikely), this is not going to be easy for Blitz to solve. I would not think they would provide a different map for each owner's unique set of readings.
This is an R&D session, please understand that it probably won't be a quick fix.
ztrack157Biggs, CA · Apr 8, 2009#21what I wouldn't understand is why would blitz not figure other mods would be done. No one really goes I'm going to get a supercharger first then the rest only on rare occurences. If your buying a supercharger you aren't buying it for fuel economy your getting it to aide your lead foot. And either way if what your saying is correct then anyone with the kit can only run the kit and cannot add anything. I'm just offering possiblities. This whole thing is just weird. I actually want to know where the chargers were purchased from if it's the same place cause they could have sent a defective batch. It's extremely rare but it does happen.
cali yarisThread starterCanoga Park, CA · Apr 8, 2009#22So they are supposed to try and create some universal map to account for every combination of aftermarket mods? That sounds problematic to me.
The weird thing for me is that only a few people are experiencing problems, and the problems aren't consistent.
The chargers were purchased from Blitz in Japan, it's the only place they are made.
ztrack157Biggs, CA · Apr 8, 2009#23I wasn't talking about Blitz from japan I was asking where in the US ie what vendor. And I know its problematic to do a map for every app and I was not implying that but having a selection of a few wouldn't have been extremely difficult either.
laszloventura cal · Apr 9, 2009#24i have always had a spark nock in my car from the beginning i use 91
so i took my car back to blitz and they changed the map and it ran better no nocking but i think that the car got used to the map and now it is back
now i run 5 gallons of 100 octane and the rest 91. but now my car seems
to be miss firing when hit the boast. but when you turn the s/c off it runs fine you can punch it with no studering at all i have gold air light pulleys header
exhauest. i am taking my car back to blitz on the 18th hope they can fix it
thanks laszlo
kurokoma-kunmy own little world · Apr 9, 2009#25 Originally Posted by
ztrack157 ↑ I wasn't talking about Blitz from japan I was asking where in the US ie what vendor. And I know its problematic to do a map for every app and I was not implying that but having a selection of a few wouldn't have been extremely difficult either.
ztrack, if you mean what vendor did many of us buy our kits from then you were talking to him, cali yaris 🙌
I for one appreciate your concern, but for the sake of those of us with an actual vested interest in the outcome, can we please keep this information gathering thread on topic? 👍
Discussion of symptoms and thoughts as to causes is potentially useful here, but random speculation about the manufacturer or vendor is not.
ae92trueno7Edmonton, Alberta · Apr 9, 2009#26mods- aem cold air intake, nst crank pulley, using factory plugs, using 93 octane gas and stp octane booster, 2.25" exhaust pipe and aftermarket muffler
boost-8psi-10psi
problem-pinging noise when in low setting at lower rpm...
i'm thinking of getting abit larger fuel injectors to see if the pinging noise goes away....
cali yarisThread starterCanoga Park, CA · Apr 9, 2009#27 I actually want to know where the chargers were purchased from if it's the same place cause they could have sent a defective batch.
To be more clear: Six kits were sent to me so far (I think) from Blitz. Laszlo's and YarisDarkness kits did not come through me. Symptoms are independent of when they were sent or by whom.
PETERPOOPOahu · Apr 9, 2009#28 Originally Posted by
laszlo ↑ i have always had a spark nock in my car from the beginning i use 91
so i took my car back to blitz and they changed the map and it ran better no nocking but i think that the car got used to the map and now it is back
now i run 5 gallons of 100 octane and the rest 91. but now my car seems
to be miss firing when hit the boast. but when you turn the s/c off it runs fine you can punch it with no studering at all i have gold air light pulleys header
exhauest. i am taking my car back to blitz on the 18th hope they can fix it
thanks laszlo
Well that must be accommadating. Did they change your map because you were the car representing their company?
Would they be willing to do a map that meets our mods?
do you got any dyno charts or A/F readings?
cali yarisThread starterCanoga Park, CA · Apr 9, 2009#29 Maybe someone who is seeing a lean condition could swap the stock air box back on and see if they are getting the same problem, if they do then that would rule out the stock air box theory.
YES PLEASE
ztrack157Biggs, CA · Apr 9, 2009#30Ok Garm thats what I wanted to know. And Jo other then symptoms right now all you have is random speculation cause the problem hasn't been found. I think even blitz can't find a way around our ECU's without replacing them with a stand alone. I'm done posting here back to what garm intended it for.
PETERPOOPOahu · Apr 9, 2009#31 Originally Posted by
cali yaris ↑ YES PLEASE
I can do this once I get my gauges (which I haven't bought yet). hah.
If noogie doesn't want to do it, we'll just have to wait until I do it....
kurokoma-kunmy own little world · Apr 9, 2009#32 Originally Posted by
ztrack157 ↑ I think even blitz can't find a way around our ECU's without replacing them with a stand alone.
I'm afraid you may be right, I've been cursing the cleverness of the ECM for two years now 😆 The effect of it's adapability is just much more pronounced with the supercharger... if I vary my driving style for even a day (say, slow-poking along at revs consistently below 2500) I can sense the slight adjustments it's made (drop in idle speed, rough running, etc). When its running well though, I couldn't ask for better, smoother, more predictable performance.
I guess I'm just really impressed that Blitz has managed to deal with the intricately efficient, dynamic fuel system as well as they have! It seems to me the current fuel map functions well within reasonable tolerances of performance and safety, but I can't speak for others. However, if they can come up with a better map that takes my intake/exhaust mods into greater account, then I'll be more than happy to experiment with it.
Originally Posted by echo_hrs ↑
Wonder if they can come up with some kind of adjustable in-cabin Fuel Control Module replacement...
Excellent idea 👍 maybe on the model of the activation switch itself, with a few pre-set fuel map choices to match mod level and driving style, such as Safe and Sane, Not So Sane, and Friggin Maniac 😆
PETERPOOPOahu · Apr 9, 2009#33OooOo that'd be ideal.
PETERPOOPOahu · Apr 10, 2009#34I just realized something, and you guys probably already brought this up, but I just realized Noogie and I are the only ones experiencing lean conditions with the s/c. We are also the only guys using the aFe intake with the kits. Is this true?
Noogie put your stock air filter on and give us some numbers!
My gauges are ordered but won't come in until tuesday!
eTiMaGoBangkok, Thailand · Apr 10, 2009#35my question is, what was Blitz's target AFR under boost? They hsould know best what it should be, and the SC owners can then compare their results.
I mean, it is a relatively low amount of boost, it may make sense that Blitz didn't see the need to enrichen the mixture so much?
largeorangefontSo Cal, OC · Apr 10, 2009#36Guys, It sounds like Blitz did not do enough R&D to check compatability with other aftermarket parts (intakes specifically)
You guys really just need something extra (piggyback etc.) to tune the car with. I'm not sure Blitz is really going to be able to help with that.
The TRD superchargers are very similar to the Blitz units (roots SC and a fuel controller box wired in) and they do not have these types of issues.
Those with intakes -
Measure the ID of you intake piping where the MAF mounts and compare this to the stock intake.
whooppee777Maryland · Apr 10, 2009#37my car runs fine under boost BUT when im cruising down the highway with the supercharger set at low(being the high setting) and the throttle is below 5%, meaning the supercharger is not engaged and i am not making boost, the car periodically seems to stutter and the a/f ratios go lean. im guessing this is preignition. this happens maybe once or twice every 10 minutes or so
now when i have the supercharger turned off this does not occur.
largeorangefontSo Cal, OC · Apr 10, 2009#38 Originally Posted by
whooppee777 ↑ my car runs fine under boost BUT when im cruising down the highway with the supercharger set at low(being the high setting) and the throttle is below 5%, meaning the supercharger is not engaged and i am not making boost, the car periodically seems to stutter and the a/f ratios go lean. im guessing this is preignition. this happens maybe once or twice every 10 minutes or so
now when i have the supercharger turned off this does not occur.
Preignition would be rich generally.
PETERPOOPOahu · Apr 12, 2009#39Garm,
Any luck with blitz? Did you send them the gathered information? Have they offered to do anything?
Does ANYONE even know what blitz says the AFR should be at with the blitz kit? heh...
I just want to know if they are going to do anything about it or not. If not, I am picking up a greddy ultimate and having a local tuner put it in and tune this thing!
Thanks
largeorangefontSo Cal, OC · Apr 13, 2009#40 Originally Posted by
PETERPOOP ↑ Garm,
Any luck with blitz? Did you send them the gathered information? Have they offered to do anything?
Does ANYONE even know what blitz says the AFR should be at with the blitz kit? heh...
I just want to know if they are going to do anything about it or not. If not, I am picking up a greddy ultimate and having a local tuner put it in and tune this thing!
Thanks
You should do that anyway...
cali yarisThread starterCanoga Park, CA · Apr 13, 2009#41Like I said (I think I did) in a previous post, this is R&D and may take some time.
I agree with largeorangefont, if you have a shop that can tune the car with an eManage, you'd be the first to do so, and you'll probably make more power than the Blitz fuel controller can.
whooppee777Maryland · Apr 13, 2009#42so that could be done? replacing the blitz fuel controller with another piggy back?
cali yarisThread starterCanoga Park, CA · Apr 13, 2009#43If someone gets a piggyback to work, we are all golden for tuning.
I think Blitz is trying to send over a few fuel controllers with different maps for someone to test.
PETERPOOPOahu · Apr 13, 2009#44 Originally Posted by
cali yaris ↑ If someone gets a piggyback to work, we are all golden for tuning.
I think Blitz is trying to send over a few fuel controllers with different maps for someone to test.
This is EXACTLY what I wanted to hear. Thanks
Paying 600-700$ on the Greddy universal ultimate and paying someone to install and tune it is definately second on the list, behind blitz trying to help the existing problem.
cali yarisThread starterCanoga Park, CA · Apr 16, 2009#45OK guys, here is Blitz's first answer. They want to confirm that the problem persists after ALL of these conditions are met. Please post up.
My next question to Blitz is if they have developed the map with a USDM ECU on hand. I can send them mine, which is no longer in my car, if they want to play with it.
Air Fuel Ratio = The chart you've provided showing lean side but Japan said it is in a fine range. [note: Noogie this is you, right?]
Fuel Controller Wiring = Japan direction is the wiring must need to be Soldered and hard wire. Do not use connector of splice etc. Can you confirm if your customers soldered the wire? Connection has to be done properly, bad connection cause resistance made improper signal to ECM.
Spark Plug = Japan recommended to replace spark plug heat range one range Colder. I believe Stock heat range of Yaris is 6, then replace to 7.
Pump Gas Quality = This is always a big issue when comes to knocking issue. Must have good clean 91 Octane Gas all the time, but this is something hard to determine because pump gas quality hard to verify......
PETERPOOPOahu · Apr 16, 2009#46 Originally Posted by
cali yaris ↑ OK guys, here is Blitz's first answer. They want to confirm that the problem persists after ALL of these conditions are met. Please post up.
My next question to Blitz is if they have developed the map with a USDM ECU on hand. I can send them mine, which is no longer in my car, if they want to play with it.
Air Fuel Ratio = The chart you've provided showing lean side but Japan said it is in a fine range. [note: Noogie this is you, right?]
Fuel Controller Wiring = Japan direction is the wiring must need to be Soldered and hard wire. Do not use connector of splice etc. Can you confirm if your customers soldered the wire? Connection has to be done properly, bad connection cause resistance made improper signal to ECM.
Spark Plug = Japan recommended to replace spark plug heat range one range Colder. I believe Stock heat range of Yaris is 6, then replace to 7.
Pump Gas Quality = This is always a big issue when comes to knocking issue. Must have good clean 91 Octane Gas all the time, but this is something hard to determine because pump gas quality hard to verify......
AIR/FUEL: I am running lean too, not just noogie. I'm not quite sure what you're asking for that question? Both my dyno charts say I am running lean. Both were 15ish and higher at WOT, especially my most recent DYNO. If they need the graphs, let me know. However, once my wideband is on, might be a different story..
Fuel controller: I soldered and shrink wrapped ALL wires.
Spark Plug: I am running the NGK iridium plugs that blitz suggests. "ngk iridium tip 7 heat spark plugs"
PUMP GAS: I've been running only 76 and Shell's 92 premium gas. I have also added lucas octane booster to every tank. I have not experienced any knocking/pre-ignition.
*My problem is running lean and possibly being robbed of power. I have always ran the good gas/octane booster, had the correct spark plugs, and soldered and shrink wrapped from the begining of firing up my kit and I am still experiencing the lean condition.
Once my wideband is hooked up, I will let you know my wideband AF readings. If they are still high, i was going to put in my stock airbox to see what it reads with that (since noogie isn't doing it). heck, even if my AFR isn't high according to my wideband, ill throw on the stock airbox just to see what numbers it shows with that too.
cali yarisThread starterCanoga Park, CA · Apr 16, 2009#47Well, they are saying Noogie's numbers are fine, so I don't know what to say about that.
PETERPOOPOahu · Apr 16, 2009#48Isn't it known throughout the tuning world that those numbers AREN'T fine? Are they giving a reason why those numbers should be fine? Or are they just saying that so they don't have to solve the problem? Well please tell them about mine and I want to hear what they say. Show them my graphs.
* I hope they take up your offer on tuning with the USDM ECU from you. Maybe it will enlighten them?
cali yarisThread starterCanoga Park, CA · Apr 16, 2009#49This does not mean they aren't working on the problem. It means they are eliminating possibilities. That is the appropriate process. They aren't going to send over fuel controllers (@ $700 a pop retail) with random maps, when they don't know what's been done or not done on our side.
MouseMiami, Fl. · Apr 16, 2009#50I'm only giving a suggestion on a stand-alone system.
You guys should really look into Mega Squirt....IF there is someone in the Yaris community that is good with tuning and doesn't mind fiddling with electronics they could produce a complete Plug-n-Play stand-alone unit.
Someone did that with the miatas.....here is an example of what it is.
http://www.diyautotune.com/catalog/m...19f4ec1322dd5f Once again, I'm only giving a suggestion. I don't know anything about ECU's or tuning.
Another company you guys could look into is Sniper Tune......They did the tuning on the Cosworth Supercharger Kit for the latest gen. miata. They might be able to crack the Yaris's ECU.
I'm a RETARD when it comes to this stuff...So flame away about how pointless a post I just posted.