Yarisworld Archive

GI: 1nz/1zz TB spacer

170 posts · 52,927 views · page 1 of 4

AlexNet0Original postRockland, ME · Apr 5, 2009#1
Throttle body spacer that fits both 1zz and 1nz TB's and can be made to order with a tap for a nitrous nozzle.

I need to guage interest on the first order so i can create accurate pricing.

I need to know who would be interested, and an approximate amount that people would be willing to pay.


1. mikenacarato
2. yarstar
3. miniTRD - Clark
4. tk-421
5. YarisSedan
6.
7.
8.
.
.
.

.

Replies 169

mikenacaratoBrentwood, TN · Apr 5, 2009#2
i would definately be on the list for sure. the issue is $$ though. :(
fujiHonolulu · Apr 6, 2009#3
If you can hook up nitro, I would be up for it as well.
cali yarisCanoga Park, CA · Apr 6, 2009#4
way to go! 👏
Nexus1155Dorchester · Apr 6, 2009#5
I'm glad we are generating interest in this, hopefully we can add another performance part to the 1NZ-FE and 1ZZ Arsenal.
dallasCanada · Apr 6, 2009#6
Can we specify who's fogger we want to use as there are critical design differences between brands?
LtNoogieWest Hills, CA · Apr 6, 2009#7
Can you design one that smoothly transitions the 1zz throttle body to the 1nz intake manifold. It seems like there's an abrupt transition for those who are putting the 1zz throttle bodies on their Yaris.
jkuchtaL.A. · Apr 6, 2009#8
^+1
mikenacaratoBrentwood, TN · Apr 6, 2009#9
^+2 :)
tk-421Dagobah · Apr 6, 2009#10
Interested!
yarstarGeorgia · Apr 6, 2009#11
VERY interested!
AlexNet0Thread starterRockland, ME · Apr 6, 2009#12
Originally Posted by dallas ↑
Can we specify who's fogger we want to use as there are critical design differences between brands?
I suppose you could, as long as it was provided to us when you ordered it, because we need to make sure the threads match perfectly so when you screw in the fogger, its facing the right way. We were planning on using a right-angle fogger.
AlexNet0Thread starterRockland, ME · Apr 6, 2009#13
Originally Posted by LtNoogie ↑
Can you design one that smoothly transitions the 1zz throttle body to the 1nz intake manifold. It seems like there's an abrupt transition for those who are putting the 1zz throttle bodies on their Yaris.

I dont think I know quite what you mean.
do you mean a middle ground? a slight restriction on the 1zz tb while still more flow than the 1nz TB?

or like a port match?
AlexNet0Thread starterRockland, ME · Apr 7, 2009#14
bump
LtNoogieWest Hills, CA · Apr 7, 2009#15
Originally Posted by AlexNet0 ↑
I dont think I know quite what you mean.
do you mean a middle ground? a slight restriction on the 1zz tb while still more flow than the 1nz TB?

or like a port match?
If I'm not mistaken, the 1zz TB is a larger opening size. It is being bolted to the 1nz intake manifold which has a smaller opening. I figured that an abrupt interface from larger diameter to smaller diameter would cause unwanted turbulence at the transition.

My question was... can your adapter plate taper from the larger diameter opening to the smaller diameter opening to lessen the turbulence?
yarstarGeorgia · Apr 7, 2009#16
Noogie may be on to something with that low turbulence idea.

What do you think Alex?
m911gtChicago · Apr 7, 2009#17
Originally Posted by yarstar ↑
Noogie may be on to something with that low turbulence idea.

What do you think Alex?
He is on to something, otherwise all the spacer will do to the guys with the 1zz tb is allow the air to come at the intake manifold at a higher velocity and when it enters, it would be more turbulent than it is without a spacer. the spacer could/would actually cause a larger disturbance to the entering air.

taper would pretty much be required for those of us with the 1zz tb.
AlexNet0Thread starterRockland, ME · Apr 7, 2009#18
I could alter it or make a different one that did that, but I think that the opening on the Intake mani actually matches that of the 1zz TB, I actually didnt look at the size differences of the TB and intake mani, so if someone else who has recently done the mod who actually looked could tell us, that would be awesome.
m911gtChicago · Apr 7, 2009#19
Originally Posted by AlexNet0 ↑
I could alter it or make a different one that did that, but I think that the opening on the Intake mani actually matches that of the 1zz TB, I actually didnt look at the size differences of the TB and intake mani, so if someone else who has recently done the mod who actually looked could tell us, that would be awesome.
Lt. Noogie was right, the intake manifold opening is ever so slightly smaller in diameter than the inner diameter of the 1zz tb. some of the flow is getting restricted, how much exactly, i am not sure.
Nexus1155Dorchester · Apr 7, 2009#20
I'm on my phone seeing fast and furious so bear with me lol

I'm going to be purchasing the machine if the test product goes well so it will be possible to machine a seperate one for the 1nz as well if there is turbulent air flow

It was that we did this on the basis that the 1zz tb mated to the 1nz manifold and thought the size would have mated, thus allowing an easier and broader range of produvtion

But thanks for bringing up that there is an actual size difference it means a lot to get it correct for the 1nz which is the more important engine of the bunch
AlexNet0Thread starterRockland, ME · Apr 7, 2009#21
Originally Posted by m911gt ↑
Lt. Noogie was right, the intake manifold opening is ever so slightly smaller in diameter than the inner diameter of the 1zz tb. some of the flow is getting restricted, how much exactly, i am not sure.
Buy a filing bit for a dremel and port the manifold? 🤷
lol jk

I will do this then - make a model for mating the 1zz and 1nz mani
- make a model for the 1nz straight through
and - keep this current one so people that want to port the intake manifold can do so and still enjoy this part.
anonymous userwindward oahu · Apr 8, 2009#22
Also depending on price I'd be interested.
You may want to post up what mods are required for this mod to be installed, so that stock cars can get in on this. Has a prototype already been tested?
PHXDEMONPhoenix, AZ · Apr 8, 2009#23
I am for sure down for the port matched 1zz tb to 1nz manifold spacer.
YarisSedanCalifornia - Bay Area · Apr 8, 2009#24
For the factory engine and throttle body i would be very interested in this. Strait bold up without having to deal with check engine light. I supose a reasonable amount to pay i would say 50 dollars. Also would be interested in powdercoated in different colors such as red. Please keep us posted im bookmarking this thread.
AlexNet0Thread starterRockland, ME · Apr 8, 2009#25
Originally Posted by anonymous user ↑
Also depending on price I'd be interested.
You may want to post up what mods are required for this mod to be installed, so that stock cars can get in on this. Has a prototype already been tested?

No other mods are required for this, someone with a completely stock car could put this on.
yarstarGeorgia · Apr 8, 2009#26
When do you estimate you will have some ready for sale and what will be the cost?
AlexNet0Thread starterRockland, ME · Apr 8, 2009#27
I am getting the proto back sometime this week. Ready for sale depends on amount of sure fire interest, After we test it. After testing Nexus is either buying a milling machine or we will have them sent to a machine shop for the first batch. I will not know the price untill then
yarstarGeorgia · Apr 8, 2009#28
Thanks Alex. Call me a "Sure Fire." I'll be looking forward to reading your posting of your R+D results.
m911gtChicago · Apr 8, 2009#29
What are we predicting the gains will be with this spacer?
YarisSedanCalifornia - Bay Area · Apr 8, 2009#30
Lets make a list to help encourage this

So far....

1. YarisSedan
2. Yarstar
3.
4.
5.
6.
7.
8.
9.
10.
Nexus1155Dorchester · Apr 8, 2009#31
What are we predicting the gains will be with this spacer?
lol i'm not going to lie and say this thing picks up 10hp all by itself, thats just not going to gain good interest in what it is

Well, here's the thing, you increase the length of the intake which increases air velocity only slightly, so if any other gains came from other spacers it would net the same as it is just as thick if not thicker. I have heard as much of a 2-3hp gain with increased throttle sensitivity from scionlife users.

I can make these to your preference without a doubt, but the sole reason they were created were to give the community another option as far as FI goes with added a nitrous fogger, which can lead to any gains you want as long as it is in reason of safety.
tk-421Dagobah · Apr 8, 2009#32
@Nexus1155: Is it a good idea to have a fogger for the TB as well as the mani (supposing of course that RH finally starts selling it)? Are there any benefits to using the TB fogger instead of the mani fogger(s)?
YarisSedanCalifornia - Bay Area · Apr 8, 2009#33
I think a throttle fogger just makes things simpler. Throttle body gives it a more direct port to each cylinder so a more precise measurement. So depending on your budget and ease of installation throttle body injection is the way to go.
Nexus1155Dorchester · Apr 8, 2009#34
This was specifically made for stock manifolds, something like holdeners manifold injects directly into each intake tract and adding more on top of it, i honestly would not recommend it IMHO(I mean what we are making adds the nitrous directly to the air charge, in a sense you can do it on holdeners but i dont think you will need more jetting than what you can do with holdeners). But that is when he does sell it.

The thing is that with the stock manifold tapping plastic and having something stable in there is a little more unstable than metal. And also that alot of plastic manifolds have a hard time with dealing with nitrous directly installed on it. I know the manifolds are made from a different composite of plastic.

The thing is that if you have a hot engine, spray something cold and heat it up and then cold again and repeat, that plastic manifold can and will crack after useage like that. Its pretty basic principles on expand and contract with different materials. While using the throttle body unit, you inject straight on the metal and it distributes it without issue, and the tb spacer takes all of the cold.

***and exactly what YarisSedan said as well it is simpler and cheaper in the long run
whooppee777Maryland · Apr 8, 2009#35
i'm definitely interested in a spacer WITH the port for the nitrous fogger
tk-421Dagobah · Apr 8, 2009#36
OK I guess I'm interested in one with the fogger as well. 👍
yarstarGeorgia · Apr 8, 2009#37
Yep...Me 2. Put a fogger on it.
YarisSedanCalifornia - Bay Area · Apr 8, 2009#38
Have you thought of putting any type of helix design on the inside of the spacer to hep with air flow velocity. Like a lot of the performance throttle body spacers have.
tk-421Dagobah · Apr 8, 2009#39
Originally Posted by YarisSedan ↑
Have you thought of putting any type of helix design on the inside of the spacer to hep with air flow velocity. Like a lot of the performance throttle body spacers have.
Not a bad idea, although it would probably take a lot more R&D to get it right, and could also affect the final price.
Nexus1155Dorchester · Apr 8, 2009#40
there would need to be alot more code to be written for it, but ultimately i don't think they do much anyways, if the stock intake is straight, it wouldnt make much different if one was just in the middle IMO.
AlexNet0Thread starterRockland, ME · Apr 9, 2009#41
So it looks like the fogger option will be standard

just remember that if you want the fogger option, and you dont want the one that will be provided, then you must pick one out before you order it from us, when that time comes.
mikenacaratoBrentwood, TN · Apr 9, 2009#42
or to cut production costs, just make all fogger setups and whoever doesnt want one put a cap on the nipple.
YarisSedanCalifornia - Bay Area · Apr 9, 2009#43
lol you said nipple
mikenacaratoBrentwood, TN · Apr 9, 2009#44
lol i knew someone would chime in with that. lol.....nipple....
yarstarGeorgia · Apr 9, 2009#45
For now, I'll be using a NIPPLE also!
AlexNet0Thread starterRockland, ME · Apr 9, 2009#46
lol ok, but it will be a threaded hole for the fogger, so if we know who wants what, we can leave the hole un-bored
AlexNet0Thread starterRockland, ME · Apr 14, 2009#47
I had thought the guy that was milling the proto for me flaked out, but he randomly called today saying he has it done in 3 thicknesses for me to test with. I have to pick them up tomorrow, and we can go from there
YarisSedanCalifornia - Bay Area · Apr 14, 2009#48
Awsome glad to see progress please keep us up to date. And dont forget pictures =).
yarstarGeorgia · Apr 14, 2009#49
Thanks for the update Alex.
PHXDEMONPhoenix, AZ · Apr 14, 2009#50
Originally Posted by yarstar ↑
Thanks for the update Alex.
+1 🙌