i just made one yesterday for my car and used M6 bolts. i think they were 3 1/4" but ill go back and check
GI: 1nz/1zz TB spacer
170 posts · 52,927 views · page 3 of 4
Replies continued
Any update on this yet =)
setting up a time for me and nexus to meet to give him the proto and the fogger i picked up
Originally Posted by AlexNet0 ↑setting up a time for me and nexus to meet to give him the proto and the fogger i picked up
YEAH!!
Any update?
I'm down for one of these, no doubt. Anodized grey!
Any updates on these?
LolOriginally Posted by tk-421 ↑Any updates on these?
I was just looking for this thread to ask the same thing 🙂
Hey guys, I had some confusion with the CNC machine place with the ordering of my machine, i fixed everything out with them and they're coming to setup the machine in my basement soon.
Thanks for the update we are all eagerly waiting. I got my custom hub spacers now i need a throttle body spacer.
don't worry, pieces to the CNC are already coming in the mail everyday, today i got the computer unit and the motors, yesterday i got the DRO unit, it should be getting drop shipped soon!!!
I'd be interested in one, as long as, my warmup idle doesn't raise anymore than 3K rpm.
i didn't read the whole thread but i didn't see this mentioned in the first few posts.
what material are you making this from?
what material are you making this from?
this is a spacer, not the throttle body swapOriginally Posted by JBIZZ ↑I'd be interested in one, as long as, my warmup idle doesn't raise anymore than 3K rpm.
Aluminium.... why? lol
^ I like the English spelling version. My vendor in India spells it that way. 😉
if you want optimum performance, make it from phenolicOriginally Posted by Nexus1155 ↑Aluminium.... why? lol
Phenolic resin can include any of various synthetic thermosetting resins such as Bakelite, obtained by the reaction of phenols with simple aldehydes such as formaldehyde. Phenolics can be used to make molded products including pool balls, laboratory countertops,[1] and as coatings and adhesives.
Phenolic material properties are useful in myriad industrial applications. Phenolic laminates are made by impregnating one or more layers of a base material such as paper, fiberglass or cotton with phenolic resin and laminating the resin-saturated base material under heat and pressure. The resin fully polymerizes (cures) during this process. The base material choice depends on the intended application of the finished product. Paper phenolics are used in manufacturing electrical components such as punch-through boards and household laminates. Glass phenolics are particularly well suited for use in the high speed bearing market. Phenolic micro-balloons are used for density control.
http://www.sdplastics.com/phenolic.html
Phenolic material properties are useful in myriad industrial applications. Phenolic laminates are made by impregnating one or more layers of a base material such as paper, fiberglass or cotton with phenolic resin and laminating the resin-saturated base material under heat and pressure. The resin fully polymerizes (cures) during this process. The base material choice depends on the intended application of the finished product. Paper phenolics are used in manufacturing electrical components such as punch-through boards and household laminates. Glass phenolics are particularly well suited for use in the high speed bearing market. Phenolic micro-balloons are used for density control.
http://www.sdplastics.com/phenolic.html
O.K Spock LOL.😉
Originally Posted by cali yaris ↑Phenolic resin can include any of various synthetic thermosetting resins such as Bakelite, obtained by the reaction of phenols with simple aldehydes such as formaldehyde. Phenolics can be used to make molded products including pool balls, laboratory countertops,[1] and as coatings and adhesives.
Phenolic material properties are useful in myriad industrial applications. Phenolic laminates are made by impregnating one or more layers of a base material such as paper, fiberglass or cotton with phenolic resin and laminating the resin-saturated base material under heat and pressure. The resin fully polymerizes (cures) during this process. The base material choice depends on the intended application of the finished product. Paper phenolics are used in manufacturing electrical components such as punch-through boards and household laminates. Glass phenolics are particularly well suited for use in the high speed bearing market. Phenolic micro-balloons are used for density control.
http://www.sdplastics.com/phenolic.html
so, garm, you can cut and paste!
but why would i suggest using a phenolic plastic over aluminum? anyone?
but why would i suggest using a phenolic plastic over aluminum? anyone?
phenolic spacer to keep IAT down because it doesn't conduct heat. It might be a more suitable idea than using aluminum as it may be cheaper and we can keep costs down for this econobox. But what about if theres constant abuse of spraying, does this material take well to something like that?
it should hold up BETTER than aluminum, as aluminum tends to rot when exposed to nitrous oxide.Originally Posted by Nexus1155 ↑phenolic spacer to keep IAT down because it doesn't conduct heat. It might be a more suitable idea than using aluminum as it may be cheaper and we can keep costs down for this econobox. But what about if theres constant abuse of spraying, does this material take well to something like that?
Alum will get hot from heat soak. Nitrous is very cold when it is being released. So if you have a hot piece of alum. Say 115 degrees F (the hottest I have seen my IAT) the alum could crack from the rapid change in temp. Is that what you were going for tamago?
LOL thanks Garm i love that spelling too.... Yeah, if thats the case, why do they make the Hemi ones which takes a bigger jetting than a yaris would handle in stock form in aluminium. I dunno, all nitrous spacers are made from aluminium, i don't think theyd do it all willy nilly, if you want me to make it from phenolic, i don't care, its just general concencus
I don't think heat soak will be too much of an issue considering the TB is metal as well.
I think plastics would be a better material for these spacers, based on what I've heard... Cheaper, more resistant to temp fluctuations, and you can fabricate them using the same process.
Originally Posted by LtNoogie ↑I don't know about you guys but I just looked at my throttle body and I don't have an extra 3/8" of threads left on my mounting studs. The plate is 3/8" thick. I would have to find longer studs for three of the mounting points and a longer bolt for the fourth one.
Food for thought.
is there an answer to this yet?
The correct length studs and bolt should be included with the spacer, and I'm sure they would do it that way so we don't have to source our own parts.
ok well i'd be interested in getting one. i don't have a colour preference though.
If someone could source longer studs for this until some are completed for testing, it would be appreciated, i will source some later on but those who have done it will already have the sizes and stuff. I know mikenacarato got longer ones for his, I'll PM him if he doesnt see this.
Spacer and test fogger are en'route to nexus
Spacer and test fogger are en'route to nexus
Got them today they look great, and i can probably find whatever we need from a local place called www.boltdepot.com
we havent forgotten about this folks, we're trying to get this going.
Any updates on this project?
I am still anxiousely awaiting the finished product =)
i will love one, can't wait to see finish product.
delays on equipment are delaying the project, but it has most certainly not been forgotten.
well i thought i would post in here to solve a potentiaal issue.
when i made my throttle body spacer i encountered an ongoing CEL that brought up a lean condition code. i dont exactly know the cause of the code but it could have been getting that much more air OR im thinking it was running a little hotter than usual. either way i put in injectors from the 1.8l 130hp corolla this past friday and drove to georgia for the weekend. i put almost 700 miles on the car with many starts and stops and went through both interstate and atlanta traffic...no CEL. problem solved. idles and runs perfectly. so if you put on a spacer and encounter this..here is a potential method to solve it. for those who wanna know about prices on the injectors...you can get them NEW at the dealer for 120-150 a piece. as far as salvage prices go..i have no idea..you would need to call your local salvage yard OR go to car-part.com to search for yards near you.
when i made my throttle body spacer i encountered an ongoing CEL that brought up a lean condition code. i dont exactly know the cause of the code but it could have been getting that much more air OR im thinking it was running a little hotter than usual. either way i put in injectors from the 1.8l 130hp corolla this past friday and drove to georgia for the weekend. i put almost 700 miles on the car with many starts and stops and went through both interstate and atlanta traffic...no CEL. problem solved. idles and runs perfectly. so if you put on a spacer and encounter this..here is a potential method to solve it. for those who wanna know about prices on the injectors...you can get them NEW at the dealer for 120-150 a piece. as far as salvage prices go..i have no idea..you would need to call your local salvage yard OR go to car-part.com to search for yards near you.
Mikenacarato, what sort of power difference did you feel? Also, with the 1zz injectors did you notice any change in fuel economy?
well i didnt really notice any power difference nor mileage loss. i did however notice the powerband was smoother and my cars idle does not bounce anymore. it used to sit at 700 then bog to 500 and bounce up to like 1200 then settle out again...and it wound do this every 15-20 seconds. now it sits at 700 and doesnt bounce
I sure wish we had a dyno on that modification. It would settle whether it makes any power.
$500 for injectors, one would hope it makes a little more!
$500 for injectors, one would hope it makes a little more!
ya i know right? its kinda pricey for just 2-3 hp lol
at this point, as hard as hp is to come by in the yaris, i think i'll take it any way i can get it.
What? Who paid $500 for 1ZZ injectors? They should cost around $25 apiece from eBay. I've go to read back a few pages.Originally Posted by cali yaris ↑I sure wish we had a dyno on that modification. It would settle whether it makes any power.
$500 for injectors, one would hope it makes a little more!
that's the cost from the dealership as far as i know.
I agree with Noogie... I found some for $25 a pop on FleaBay... Used, but they should work just fine.Originally Posted by LtNoogie ↑What? Who paid $500 for 1ZZ injectors? They should cost around $25 apiece from eBay. I've go to read back a few pages.
And no, I won't post a link, since the seller only has 5 in stock. 😁
i told everyone what the dealer price was per injector...no one paid 500 for injectors. i didnt mention an ebay price or salvage price because your price may differ than what mine would.
Roll call.
serious interest only. I need a head count so I can get accurate pricing per unit.
I would use the list already here, but its been a while
list of names will be added on the starting post.
serious interest only. I need a head count so I can get accurate pricing per unit.
I would use the list already here, but its been a while
list of names will be added on the starting post.
Hmm... I really need spare money!!
put me on there chief
Present and accounted for.