Yarisworld Archive

GI: 1nz/1zz TB spacer

170 posts · 52,927 views · page 2 of 4

Replies continued

Nexus1155Dorchester · Apr 15, 2009#51
I am happy about these replies, it reassures me that spending thousands on a CNC Machine will be well worth it in the long run. If anyone has any ideas for any other parts than can be CNC'ed and anyone wants/needs toss me or alex a message.
PHXDEMONPhoenix, AZ · Apr 15, 2009#52
Originally Posted by Nexus1155 ↑
I am happy about these replies, it reassures me that spending thousands on a CNC Machine will be well worth it in the long run. If anyone has any ideas for any other parts than can be CNC'ed and anyone wants/needs toss me or alex a message.
I wish I could afford one 🙇 CNC machines have so much potential.
tk-421Dagobah · Apr 15, 2009#53
Originally Posted by Nexus1155 ↑
If anyone has any ideas for any other parts than can be CNC'ed and anyone wants/needs toss me or alex a message.
How about some 10mm rear hub spacers? 😁
Nexus1155Dorchester · Apr 15, 2009#54
hahah i can probably do it, but don't they already make them for 4x100 hubs? :P
tk-421Dagobah · Apr 15, 2009#55
Originally Posted by Nexus1155 ↑
hahah i can probably do it, but don't they already make them for 4x100 hubs? :P
I've been looking around for a couple of months now (YW, scionlife, ebay, etc)... Nobody's making them for some reason 🤷
AlexNet0Thread starterRockland, ME · Apr 15, 2009#56
Ill need to pull my wheel off for some measurements, but im pretty sure I can design it. Do you have a link to another kind that you want to look the same just to make sure I have the right piece in mind?
cali yarisCanoga Park, CA · Apr 15, 2009#57
nipple
Nexus1155Dorchester · Apr 15, 2009#58
hahahah I LOL'ed I knew someone was gonna bring it up again
tk-421Dagobah · Apr 15, 2009#59
Originally Posted by AlexNet0 ↑
Ill need to pull my wheel off for some measurements, but im pretty sure I can design it. Do you have a link to another kind that you want to look the same just to make sure I have the right piece in mind?
I've seen 2 models so far (sorry about the sizes... 😳):

Picture not included in this copy


Picture not included in this copy
Picture not included in this copy
AlexNet0Thread starterRockland, ME · Apr 15, 2009#60
Ohh you just want a straight spacer, I was thinking adapter plate, yeah thats no problem at all, Ill get those measurements when I do my brakes this weekend. I assume you want them to fit a stock wheel
YarisSedanCalifornia - Bay Area · Apr 15, 2009#61
Make like a 5 MM something thats thin enough to bring the rear wheels out a bit but without requiring to replace the studs.
Nexus1155Dorchester · Apr 15, 2009#62
yeah i was about to chime in, the studs would be an issue if you go to large on the spacer. But also an adapter would be nice too for more exotic wheels if anyones into that kind of stuff..
tk-421Dagobah · Apr 15, 2009#63
Originally Posted by Nexus1155 ↑
yeah i was about to chime in, the studs would be an issue if you go to large on the spacer. But also an adapter would be nice too for more exotic wheels if anyones into that kind of stuff..
Well, I'd rather go for the adapter for a reasonable price. I have 15x6.5" ET +38 wheels BTW.
AlexNet0Thread starterRockland, ME · Apr 15, 2009#64
Originally Posted by tk-421 ↑
Well, I'd rather go for the adapter for a reasonable price. I have 15x6.5" ET +38 wheels BTW.
So it should be fine if I modeled it on the stock wheel
cali yarisCanoga Park, CA · Apr 15, 2009#65
This would be a cheaper alternative to the H&R spacers I carry. (They do come with adjusted length studs, though).
AlexNet0Thread starterRockland, ME · Apr 15, 2009#66
I dont know if I would trust myself designing an adapter, so maybe a 5 or 10 max mm straight spacer from me/nexus
tk-421Dagobah · Apr 15, 2009#67
Yeah those spacers sound good to me. I'm looking for 10mm though. 5mm just doesn't seem wide enough for the rear in my case.

Can you get the longer studs as a package deal? That would sure be helpful.
AlexNet0Thread starterRockland, ME · Apr 15, 2009#68
I dont know that i will be able to source longer studs better than garm or another vendor.
They already have their connections
AlexNet0Thread starterRockland, ME · Apr 18, 2009#69
Got the spacers, one is our proto, 3 are too small for the fogger, so they can be sold as is for spacers, they look decent, cut from stainless

2 attachments not included in this copy

PHXDEMONPhoenix, AZ · Apr 18, 2009#70
🙇
AlexNet0Thread starterRockland, ME · Apr 18, 2009#71
I'll need to get the exact thicknesses for you before I sell them so you know which length bolts to get to replace the 1 bolt that is inverted on the manifold. I just know that the one we're using is 1/2"
fujiHonolulu · Apr 18, 2009#72
In theory, a throttle body spacer, what performance increase does it provide?
AlexNet0Thread starterRockland, ME · Apr 18, 2009#73
I dont know yet, theoretically, better throttle response, minimalistic low end torque, I will be dynoing with the 1/2", with and without the tapped nitrous fogger
AlexNet0Thread starterRockland, ME · Apr 19, 2009#74
^
cali yarisCanoga Park, CA · Apr 19, 2009#75
Are these going to be made in aluminum or steel like your proto?
Nexus1155Dorchester · Apr 19, 2009#76
Aluminum and possibly annodized in black and red and blue if i deicde to dive into annodizing with it as well for a stronger/prettier end product..
cali yarisCanoga Park, CA · Apr 19, 2009#77
hard anodize would be strongly recommended for this part. I wish I could try one!
Nexus1155Dorchester · Apr 19, 2009#78
well we'll obviously see what we can do for our prized yarisworld veteran ;) color preference? You going to shoot some nitrous?

Plus drilling and tapping the aluminum will be like butter compared to cutting into steel
YarisSedanCalifornia - Bay Area · Apr 19, 2009#79
Ooooh glad to see there is progress. I have been on many forums where people talk about stuff and months go by and everyone is dissapointed.

I cant wait to see the finishe product.
AlexNet0Thread starterRockland, ME · Apr 19, 2009#80
oh theres no going back now, right nexus? lol
AlexNet0Thread starterRockland, ME · Apr 19, 2009#81
Originally Posted by cali yaris ↑
hard anodize would be strongly recommended for this part. I wish I could try one!
You wanna mail me a traceout of the back of the Xb TB? 🙂
Nexus1155Dorchester · Apr 19, 2009#82
Ahhhh forgot he went to the XB Throttle body, i read that thread front to back, but I didn't even think about it!...and yupp no going back now!
Nexus1155Dorchester · Apr 24, 2009#83
Bump ~ just to get a general demographic, does anyone want there to be colorful anodizings for a flashier piece to match the red and blue of the NOS kit or black. Any other color suggestions are welcomed...
whooppee777Maryland · Apr 24, 2009#84
anodized red
tk-421Dagobah · Apr 24, 2009#85
Originally Posted by Nexus1155 ↑
Bump ~ just to get a general demographic, does anyone want there to be colorful anodizings for a flashier piece to match the red and blue of the NOS kit or black. Any other color suggestions are welcomed...
I don't really mind either way, but if you do choose to anodize, I'd really prefer a graphite gray color to match the pulleys (I don't have any other colors under there, and I'd rather keep it that way). If gray isn't an option, then I'd go for black.
YarisSedanCalifornia - Bay Area · Apr 24, 2009#86
adonized red as well
Nexus1155Dorchester · Apr 24, 2009#87
I can make it bright green if you want lol I can pickup some gunmetal/graphite grey if you need it, i might use that other than black if thats the case because it would match pulley sets and possibly the tb better..

edit* So definately a go on the red!!!
mikenacaratoBrentwood, TN · Apr 24, 2009#88
Originally Posted by tk-421 ↑
I don't really mind either way, but if you do choose to anodize, I'd really prefer a graphite gray color to match the pulleys (I don't have any other colors under there, and I'd rather keep it that way). If gray isn't an option, then I'd go for black.
+1, if you make graphite grey that would rock.
xen555Puerto Rico · Apr 24, 2009#89
+1 red to much the nst pulley kit!!!
yarstarGeorgia · Apr 24, 2009#90
I don't care about color. If I had to choose, I'd say Red or Grey.
cali yarisCanoga Park, CA · Apr 25, 2009#91
I'll hold off, I have a Celica GT-S TB waiting for when we swap motors and build a custom intake mani 🙂
dallasCanada · Apr 25, 2009#92
Anodize it black, thats a part you don't want standing out, especially if you plan to run the fogger nozzle of it. 😁
LtNoogieWest Hills, CA · Apr 25, 2009#93
What is the threading on the nitrous port? I'm looking into water injection next and need to find a good place for the injector.
Nexus1155Dorchester · Apr 25, 2009#94
meth injection nozzles are around 1/8" thick and some nitrous are eiher 1/16th or 1/8th inch as well. We would be making both to user specifications as people will want to use different nozzles with the kit.

Each of these will be made to what the user wants. The only piece being produced in large quantity is the main throttle body spacer in its raw form.
PHXDEMONPhoenix, AZ · Apr 26, 2009#95
Originally Posted by whooppee777 ↑
anodized red
Originally Posted by YarisSedan ↑
adonized red as well
Originally Posted by xen555 ↑
+1 red to much the nst pulley kit!!!
+1 for red.
LtNoogieWest Hills, CA · Apr 26, 2009#96
Originally Posted by Nexus1155 ↑
meth injection nozzles are around 1/8" thick and some nitrous are eiher 1/16th or 1/8th inch as well. We would be making both to user specifications as people will want to use different nozzles with the kit.

Each of these will be made to what the user wants. The only piece being produced in large quantity is the main throttle body spacer in its raw form.
Thanks, I need to research the meth injection nozzles. I don't want to go back to the first page. Have you guys established a price yet?
PHXDEMONPhoenix, AZ · Apr 27, 2009#97
any pricing details yet?
Nexus1155Dorchester · Apr 27, 2009#98
Well i am awaiting delivery on the machine, I have to get the aluminum, calculate sizing, energy consuption, retail, but it will be priced competitively with market value, so don't worry
PHXDEMONPhoenix, AZ · Apr 28, 2009#99
Sounds good.
LtNoogieWest Hills, CA · Apr 28, 2009#100
I don't know about you guys but I just looked at my throttle body and I don't have an extra 3/8" of threads left on my mounting studs. The plate is 3/8" thick. I would have to find longer studs for three of the mounting points and a longer bolt for the fourth one.

Food for thought.