Yarisworld Archive

Yaris Motor Swap Thread *Read before posting swap threads*

218 posts · 914,851 views · page 1 of 5

SabretoothOriginal postSt Cloud FL · Mar 21, 2009#1
Well, I lost the old thread back in the hack, so finally got around to wanting to redo the thread, hope you enjoy. Hopefully it will sticky this time

First lets start with catagorizing particular motors that have been tested, proven, and thought about being swapped into our Yaris'

Proven: This is the basic section in which a motor has been swapped and documented to work.
-2zzge (Celica GT-S Motor,1.8L 180ish HP) Proven Sedan, and older gen Echo Hatch only.
-4age Blacktop/Silvertop (1.6L 160hp) Proven swapped into an older gen Echo Hatch only
-4agze 16 valve (1.6L Superchared) Proven swapped into a newer Yaris, overseas, but documented. Motor was then changed over to a turbocharged setup for more HP.
-DRIFT YARIS: I dont have information off hand, other than it is a RWD placement using an older Tacoma motor for the powerplant, All custom drivetrain, etc.

Tested: Experimeted, but not finished or proven
-4G63 (Lancer Evolution Motor, 2.0L Turbocharged) Swap was to be in progress but not documented as finished overseas.

Thought of and Discussed: Self explanitory, I did seperate this into two catagories.
Practicle, but likely not to fit without heavy modification.
-3gste (MR2 Turbocharged Motor) 2.0L Turbo
-3gse (MR2 Beams Motor) 2.0L N/A
-2azfe (Scion TC/Scion Xb2.0 Motor) 2.4L N/A

WHY?!?!
-K20 (Civic SI/RSX Motor) 2.0L N/A
-B18 (Civic Motor) 1.8L N/A
-B16 (Civic Motor) 1.6L N/A
-13B (RX7 Motor) 1.3L N/A or Turbocharged
-Renesis (RX8 Motor) 1.3L N/A

Ok, lets get down to business:

1. Motor Swap intro
With all motor swaps, there are two things your going to need: Time and Money, without both; your project is dead in the water before it stands. Motor swaps are not an overnight deal, you can just wrench it up in a weekend for a car like ours. There is a lot of time taken into changing wiring harnesses, coverting throttle types, custom piping for exhaust and intake systems, then there is modification to any structure of the car (firewall, etc), not to mention any custom parts you might need to order, or fabricate. If you dont have a second car, I wouldnt expect you to try and do this without having another form of getting around for 3-4 weeks, depending on who is doing the job and how much time is being invested daily.

Money is a precious thing when it comes to a swap, if you dont do it right...you could be left with a car that looks new, but runs like a clunker. All used motors need to be broken down, inspected, tested, and cleared by the mechanic or installer to see if there are any major issues that need to be fixed or addressed before the motor you just spent up to $4000 is placed into your car. Not just are the engines costly, a 4age can run you $800 bucks for a good mileage one. A 2zzge can run you almost $4000 for transmission and all, best bet is to check before you buy. Sometimes you can find just as much horsepower in a smaller, or cheaper engine.

Money is also another factor when it comes to installing the motor, when you start working, nothing is going to just bolt right up and wire in. You are NOT working on a Honda, so be prepared to start cutting, splicing, etc. That you will be more than likely fabricating new parts or modifying existing ones to make them work. This can take both time and money, depending what you are having done. Custom driveshafts could take a week, seeing where they are being sourced or made from. Nothing is going to be easy, even a experienced mechanic will let you know this one when it comes to doing a new Toyota swap.

You can only expect one thing, lots of time and money leaving you, totaling into the weeks and possibly months, and up into the $5-6k range, depending on cost of parts and labor. This number could reach into the $10k+ range, also pending you are going to further modify the engine before or after install.

2.Basic already known knowledge about swaps for the Yaris

From a personal aspect, I will include one thing, IF you are going to modify the engine of in which you are placing into the car, please do so BEFORE putting it in the Yaris, say if you change an intake manifold after you put it in the car, it might not work anymore...this problem could have been addressed and fixed prior to install.

So far we know a bit about doing swaps for the Yaris, there are basically a couple people who have gone in depth to check into, or swap out a motor themselves. So far only 1 motor swap has been done in the US, rest are from Canada, Puerto Rico, and Thailand, others may apply...depending on sources.

So far the only information we have on parts that bolt up with Yaris parts from other motors:
-Throttle bodies from 1zzge motors will work on a Yaris, but throws a CEL unless modified.
-Transmission parts from the Xa/Xb/Echo will work on a Yaris, consult previous threads for more information on specific parts.
-RUMOR: That a 4age series motor has the same transmission housing as the Yaris, I have yet to find supporting information to confirm this, but it has been spread around enough to be considered possible.

Replies 217

kenkydUSA · Apr 23, 2009#2
Originally Posted by Sabretooth ↑

WHY?!?!
-K20 (Civic SI/RSX Motor) 2.0L N/A
-B18 (Civic Motor) 1.8L N/A
-B16 (Civic Motor) 1.6L N/A
-13B (RX7 Motor) 1.3L N/A or Turbocharged
-Renesis (RX8 Motor) 1.3L N/A
i know why they are in a "why?!?!" section, but how come those specific ones are mentioned? just because of smaller size? i wish i could put in a wankel.
Malaya1221Torrance, Ca · Apr 23, 2009#3
how about a busa?
1340 cc (82 cu in), 4-stroke, four-cylinder, liquid-cooled, DOHC, 16-valve
supmetSouthern California · Apr 23, 2009#4
The 3S-GTE engine is also found in celicas(GT4 = AWD) Doing a full custom AWD/3sgte swap from a celica GT4 to a yaris would pretty much be my dream swap.

The only problem is, that is one huge engine to squeeze into the yaris.

Picture not included in this copy
at3GGVA Beach · Apr 23, 2009#5
i think the sr20 should be a distant consideration as well...
xbalancemalaysia · Apr 23, 2009#6
Is there any engine is a direct fit to the engine bay mean dont need to mod the engine mounting location?
at3GGVA Beach · Apr 23, 2009#7
highly doubt it
eTiMaGoBangkok, Thailand · Apr 24, 2009#8
in theory the 1.8L 2ZR-FE from the European-spec Yaris TS (and also the same engine as used on the new Corolla and Scion xD), as I highly doubt Toyota would have two totally different bodies for each engine. But, with "just" 130hp, it's not exactly worth the swap... unless it can be built up to much much higher levels, but I don't think that has been proven yet....
cali yarisCanoga Park, CA · Apr 24, 2009#9
1. take 1.5L out
2. put built/stroked 1.6L in
3. turn up the boost... a lot.
4. have a nice day.
MorganPCB, FL · Apr 24, 2009#10
Originally Posted by supmet ↑
The 3S-GTE engine is also found in celicas(GT4 = AWD) Doing a full custom AWD/3sgte swap from a celica GT4 to a yaris would pretty much be my dream swap.

The only problem is, that is one huge engine to squeeze into the yaris.
the 3s weighs like 360+lbs... thats an extra 200lbs from the 1nz

what about a 4efte instead??
xen555Puerto Rico · Apr 24, 2009#11
Originally Posted by Sabretooth ↑
WHY?!?!

-13B (RX7 Motor) 1.3L N/A or Turbocharged
why not??

that the swap i will do if a i have the money and if my wife dissapear!!!

Stock Motor with 2 rotors $ 800 - 1200
Displacement 1308cc
Power Output 255bhp @7k
Torque 220lb-ft @5k
Redline 8000 rpm
0-60 mph 5.1 s
Qtr. Mile 14.0s @100 mph
Est. Top Speed 159 mph

and with a turbo setup and ported rotors u can fly low...

to bad the yaris is my daily drive, but some day... some day i will do this swap... plus i love the rotor engine sound and the motor have the size of a 5 gals. bottle
dallasCanada · Apr 25, 2009#12
Only if you run a sucessful online Tuner business and spend all your hard earned cash on your Yaris 😁

Originally Posted by cali yaris ↑
1. take 1.5L out
2. put built/stroked 1.6L in
3. turn up the boost... a lot.
4. have a nice day.
justjesusOrange County · Apr 27, 2009#13
Odd. I toyed with the idea of a Honda B16 in a yaris.
WRW76Melbourne · Apr 28, 2009#14
ive been wondering about the 4efte engines as i have owned 2 starlet turbos in the past both running over 200bhp.
constantinRomania/Craiova · Apr 28, 2009#15
I looked around the engine bay of my sister's 1.3 Yaris and I can say that the 2ZRFE ( 1.8 Dual VVT-i) will surely fit but as it has been said before: WHY? The power gain is minimal and this type of engine is very hard to modify.

In my opinion the best choice would be ( money not being an issue) the Celica 1.8 192BHP. The size is a bit smaller than my 2ZRFE and a lot of mods are available.
SabretoothThread starterSt Cloud FL · Apr 28, 2009#16
Can Anyone confirm the engine dimentions for the 2zz vs. the 2ZR?
MouseMiami, Fl. · Apr 28, 2009#17
What about the 1.8 BP out of the old Mercury Capri's.....It's the same motor that was in the miata... just in FWD form.....Not to mention all of the NA goodies that are out there for the miata...including ITRBs.
xen555Puerto Rico · Apr 28, 2009#18
rotary engine 👍 this modifed engine 13b stage 2 only cost $2500 and see the number at 16psi lbs. of boost and the rotor engine can hold 24 lbs of boost... here in puerto rico theres a lot a modified cars with this type of engines making 9 sec. at the 1/4 miles and with a little more money they are making 7 to 8 sec. imagine that power in a car that weight almost 600 lbs. less than the rx7

1 attachment not included in this copy

jounabayamon puerto rico · Apr 29, 2009#19
i'll stay with the 2zzfe they are pulling over 200bhp n/a in pr scary shit in the strip
SEVENPuerto Rico · Apr 29, 2009#20
See you guys are not thinking outside the box!!! Lets just put in a 2JZ!!!! Sure we would have to sit in the rear seats but hey!!! It'll be worth it!!! Imagine a twin turbo 2jz YARIS!!! Putting out 600whp!!!!
MouseMiami, Fl. · Apr 29, 2009#21
For that I'd rather throw in a RB26DETT(with the AWD) and whoop the 2JZ's ass......There is a video on youtube of I think either a Mines or Tommy Kaira Skyline against a Power House Amuse Supra. The Skyline just kicks the supras ass.

Other notable swaps......how bout the 4G63 from the older eclipses and Evos.

Here is the Video.....http://www.youtube.com/watch?v=VK0uyCnY3m8
MouseMiami, Fl. · May 20, 2009#22
How about a 1.8l V6 from the MX-3's...I think the engine designation is K8
RS07Montreal · Jun 18, 2009#23
Originally Posted by Malaya1221 ↑
how about a busa?
1340 cc (82 cu in), 4-stroke, four-cylinder, liquid-cooled, DOHC, 16-valve
x2

It has been done it the Smart, so why not in our cars ? Would be nice.
aeipee13los angeles · Jun 18, 2009#24
I think the 2zzge would be the most "true to form" swap for a new yaris. Has anyone even attempted it yet (in a hatch)? Anything but a Toyota engine would be blasphemy!
ethelitershouston · Jul 28, 2009#25
I agree. Seems like there aren't any swap yaris hatch here. If your out there check in. were interested!!
AttitudePakistan · Aug 24, 2009#26
Hello
ive got vitz with 1szfe, i am willing to swap the engine
the available engines in my country is 1nzfe, are you people in favour of that ? it comes bolt on, no issues
please reply thanks
thepaidtravelerNorwich, Ct · Aug 27, 2009#27
Originally Posted by xen555 ↑
rotary engine 👍 this modifed engine 13b stage 2 only cost $2500 and see the number at 16psi lbs. of boost and the rotor engine can hold 24 lbs of boost... here in puerto rico theres a lot a modified cars with this type of engines making 9 sec. at the 1/4 miles and with a little more money they are making 7 to 8 sec. imagine that power in a car that weight almost 600 lbs. less than the rx7


Now that's a swap worth considering! There are lots of Rotorys around this country. I had thought about this about 2 months ago. Not only would it be different but it would probably be pretty neat to see.
Saskatchewan17Aurora, IL · Oct 12, 2009#28
A 13b would be rediculously sick.
Same with an SR20. Is there room for a Nissan RB series engine? I'm guessing no way in hell.
Also to consider would be a B6T from the old Mazda 323 GTX.
sheraz2000Lahore, PK · Oct 28, 2009#29
hi guyz, i have a vitz with 1KR-FE 1.0 L 68HP small engine in my car. yesterday while going around the scrap market, i found out many half-cuts of Vitz with 1NZ-FE. The engine was complete with an auto tranny, genuine wires and the ECU.

What i am wondering is, will the ECU cause me any problems at such a transplant. Even though the ECU is coming along with the engine, but will it be able to adjust to the new environment ?

The Engine mounts : Do i need to alter them at any point or will the newer engine fit bolt-to-bolt ?

What about the axels ??

Do i need the front shocks to be changed aswell ??

the cost of this transplant is not much, but what my concern is that is doing such, i dont loose my car at all?

please advise ....
MarfulionFlorida · Oct 28, 2009#30
how bout a built hayabusa engine? 200+ hp n/a, 10,000 RPM, anyone?
SabretoothThread starterSt Cloud FL · Oct 28, 2009#31
🎉
Originally Posted by sheraz2000 ↑
hi guyz, i have a vitz with 1KR-FE 1.0 L 68HP small engine in my car. yesterday while going around the scrap market, i found out many half-cuts of Vitz with 1NZ-FE. The engine was complete with an auto tranny, genuine wires and the ECU.

What i am wondering is, will the ECU cause me any problems at such a transplant. Even though the ECU is coming along with the engine, but will it be able to adjust to the new environment ?

The Engine mounts : Do i need to alter them at any point or will the newer engine fit bolt-to-bolt ?

What about the axels ??

Do i need the front shocks to be changed aswell ??

the cost of this transplant is not much, but what my concern is that is doing such, i dont loose my car at all?

please advise ....
These are all things you would need to get advise locally from a mechanic that specializes in motor swaps...

Here in the US NO ONE has swapped a motor into our cars that naturally doesnt belong there, a couple of us have swapped 1.5L engines from another Yaris or even an Xb, but nothing scary and new...



Originally Posted by Marfulion ↑
how bout a built hayabusa engine? 200+ hp n/a, 10,000 RPM, anyone?
Anything is possible, the motor should easily fit, seeing that they could fit it isnt a smart car, I dont see why a Yaris would be any different if not easier. The case is, finding an engine and finding a shop that is willing to do it.

With enough $$$$ you can make anything happen, Even probably shove a 350 small block in the back ;)
MarfulionFlorida · Oct 28, 2009#32
there is an abundant amount of hayabusa engines on ebay, all for less than 2k, but iam wondering now that you would probably need a different transmission as those bike transmissions are geared for a bikes weight, i wonder how they did with the smart car..
revoturboIndonesia · Dec 30, 2009#33
some one in indonesia built yaris with 3SGTE engine & 4wd !!! (swap engine ex celica st 205)..
dougiefresh188orlando/kissimmee florida · Mar 19, 2010#34
if u need some oen to drive that 2jz yari i can sit in the back seet and still reach the controls. being 6'4 has its advantages
george1973Greece · May 13, 2010#35
Originally Posted by supmet ↑
The 3S-GTE engine is also found in celicas(GT4 = AWD) Doing a full custom AWD/3sgte swap from a celica GT4 to a yaris would premtty much be my dream swap.

The only problem is, that is one huge engine to squeeze into the yaris.

Picture not included in this copy
This is my dream too my friend...And i done it...........

3 attachments not included in this copy

H3LlIoNMidatlantic · May 13, 2010#36
Holy Shit! You can't come in here, drop something like that, and expect to walk out. Pics/details like NOW! That's badass dude.

Functional AWD, or just engine/tranny swap?
06silveryarisPuerto Rico · May 13, 2010#37
Originally Posted by Mouse ↑
How about a 1.8l V6 from the MX-3's...I think the engine designation is K8
Well they put it in the mazda 323 hb and its a good combo

http://www.youtube.com/watch?v=AACd9YZlh5E
george1973Greece · May 14, 2010#38
Originally Posted by H3LlIoN ↑
Holy Shit! You can't come in here, drop something like that, and expect to walk out. Pics/details like NOW! That's badass dude.

Functional AWD, or just engine/tranny swap?
Motor hub st 205 FWD
H3LlIoNMidatlantic · May 15, 2010#40
Dude that thing is awesome. Congrats.
ParmasML · May 15, 2010#41
Engine to get crazy with! what engine managment are you using? stock?
george1973Greece · May 16, 2010#42
Originally Posted by Parmas ↑
Engine to get crazy with! what engine managment are you using? stock?
Engine managment:Apexi power fc my friend.....
cali yarisCanoga Park, CA · May 16, 2010#43
well done, 3rd gear pull?

is there video of it driving around?
george1973Greece · May 17, 2010#44
thanks a lot guys.....i love that engine...the most fun is on the street,no one can imagine what is under the hood....it was one guy yesterday and he had a Honda s2000 and he can't believed in his eyes.he left to far behind....I could not believe his eyes.....
Bluevitz-rsOshawa, Ontario, Canada · May 17, 2010#45
Originally Posted by george1973 ↑
thanks a lot gays.....i love that engine...the most fun is on the street,no one can imagine what is under the hood....it was one gay yesterday and he had a Honda s2000 and he can't believed in his eyes.he left to far behind....I could not believe his eyes.....
Just to help you with your english spelling... You're typing out gay, as in "homosexual or queer." The word you're looking for is Guy
turboecho2005Ottawa, Ontario · May 17, 2010#46
sick! 3sgte for the win!
george1973Greece · May 19, 2010#47
Originally Posted by Bluevitz-rs ↑
Just to help you with Cour english spelling... You're typing out gay, as in "homosexual or queer." The word you're looking for is Guy
thanks a lot my friend...my mistake...
fnkngrvIn The Hotbox · May 19, 2010#48
Just in case anyone would be interested this seems like a good deal on a 2zzge seeing as how it comes with not just the motor, but also the 6 speed tranny and ECU all for 2500 with free shipping:

http://cgi.ebay.com/ebaymotors/Toyot...item5192a9177b
ethelitershouston · Jun 14, 2010#49
Why no mention of a euro 1.8 ts swap? Seems strange ...
thebarberGrand Rapids, MI · Jun 14, 2010#50
Originally Posted by etheliters ↑
Why no mention of a euro 1.8 ts swap? Seems strange ...
ive talked about it....the 2zrfe swap, that is

started a thread or two about it on microimageonline.com

internet here not too quick at the moment, otherwise id find the thread links for you