Yarisworld Archive

Yaris Motor Swap Thread *Read before posting swap threads*

218 posts · 914,851 views · page 4 of 5

Replies continued

ilikericesavannah, ga · Mar 31, 2014#151
Originally Posted by CrankyOldMan ↑
The 2ZR is being developed for the Lotus Elise, supercharger and all.
😳

1 attachment not included in this copy

CrankyOldManWest Michigan · Mar 31, 2014#152
Disregard, the 2ZR-GE supercharger is only available directly from Lotus in the UK. The only way to get one would be to buy it from them (assuming they would even do that) and then get standalone management. I already own the Blitz, and am not afraid of making my own conversion parts to get it on a 2ZR.
ilikericesavannah, ga · Apr 1, 2014#153
Jezus cranky.. thanks for that dissapointing post... crushed dreams
CrankyOldManWest Michigan · Apr 1, 2014#154
Originally Posted by ilikerice ↑
Jezus cranky.. thanks for that dissapointing post... crushed dreams
Bah, you don't really want to come play in SMF. The PAX modifier is murder on our little cars. =P
fnkngrvIn The Hotbox · Apr 1, 2014#155
Originally Posted by xnamerxx ↑
Aren't you going to run into that issue with any Toyota engine? I don't think any Toyota OBD2 engine has great tuning support outside of the trucks.

I'm stuck dealing with OBD1 tuning issues on a Miata, and I just can't see why you would want that. OBD2/CAN is great from a tuning, and diagnostic standpoint.
Thomas has an OBDI 4ag and doesn’t seem to be having any problems. The beauty with the 4e-fte is that it gives you options down the line since it has beffier rods stock and a great compression ratio stock as well.

From my m-o-b-i-l-e
ilikericesavannah, ga · Apr 1, 2014#156
Originally Posted by CrankyOldMan ↑
Bah, you don't really want to come play in SMF. The PAX modifier is murder on our little cars. =P
Yea, I would like to play in SMF one day.. I think I can do some damage with 100 more hp and 275 A6's or at least some ventus z214 to save some money.
yariseggvvtiCali · Apr 1, 2014#157
K20A 225hp engine with independent rear suspension that will be a perfect set up for Yaris.
ilikericesavannah, ga · Apr 2, 2014#158
Agreed, GOD the rear suspension is the one thing I can't stand about the yaris. It's the one reason I want to return to stock and get something else.
monchito18Puerto Rico, Isabela · Apr 22, 2014#159
PICS:

Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy

2zz

Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
ilikericesavannah, ga · Apr 23, 2014#160
Damn, I bet that 2zz is a monster.
1.5Tampa · Apr 23, 2014#161
With lift!!!! 🤤
RagnaCaTVillalba, Puerto Rico · Nov 12, 2014#163
Monkey Wrench is going to start offering support to the 2ZRFE in January I'm intrested on what internal bolt-ons might come up, 2ZR hits easily 150 hp with external mods with 150 tq to back it up...
Bluevitz-rsOshawa, Ontario, Canada · Nov 12, 2014#164
That's awesome.


Sent from my iPod Touch
ilikericesavannah, ga · Nov 13, 2014#165
Im saving my money now... Super excited.. That will be my next upgrade
RagnaCaTVillalba, Puerto Rico · Dec 8, 2014#166
Monkey wrench already confirmed that 2ZR connecting Rods are shared with 1zz... I'm waiting on Pistons and cams! gonna hit that 180whp mark...
ilikericesavannah, ga · Dec 9, 2014#167
ugh.. I need you to make a thread on yaris world on your 2zr swap and what you needed to do.

If I am not mistaken, the 2zr swap is compatible with the 1nz transmission thats already in the yaris, correct?
RagnaCaTVillalba, Puerto Rico · Dec 9, 2014#168
I'm time limited but assure you when you jump in I'll be here to give you full support and yes you can use the Yari tranny been using it for the past year 0 problems even at the Drag strip no signs of giving in... Although I'm swaping the XD tranny when I get some mods done to the tranny.
ilikericesavannah, ga · Dec 9, 2014#169
Nice!
CrankyOldManWest Michigan · Dec 9, 2014#170
Originally Posted by RagnaCaT ↑
Although I'm swaping the XD tranny when I get some mods done to the tranny.
Yup. Just as soon as I figure out what I did with my notes from the tooth-counting adventure. =)
RagnaCaTVillalba, Puerto Rico · Dec 9, 2014#171
CrankyOldMan Im counting on you!


Sent from my iPhone using Tapatalk
CoryMWhite Rock BC · Dec 13, 2014#172
Does anyone know if there is a viable option to get factory LSD with any of these swaps? I'd seriously consider the 2zz swap if I could get LSD at the same time. Otherwise, I'd rather get LSD and keep the wussy 1.5L.
Thanks,
Cory
sang pengembarajeddah - saudia arabia · Jan 12, 2015#173
i do swap whole engine 2nzfe by 1nzfe ,,,it is plug and play .. 3 working days with 2 mechanic ..exciting and enjoy the swap successfully . no CEL out and 100% working perfectly.
fnkngrvIn The Hotbox · Jan 19, 2015#174
Found out there has been a bunch of guys over in the UK that have done a 4efte swap. Been speaking with a guy and he says that the work to do it is minimal and 2 of the 3 mounts line up perfectly. Not to mention the 4e block is designed for boost from the factory. You can easily get over 400whp from them nowadays.
CrankyOldManWest Michigan · Jan 19, 2015#175
Originally Posted by fnkngrv ↑
You can easily get over 400whp from them nowadays.
Sweet baby Jeezuz.
ilikericesavannah, ga · Jan 19, 2015#176
NEED MORE INFO!
ilikericesavannah, ga · Feb 24, 2015#178
yep. I believe that is it
RagnaCaTVillalba, Puerto Rico · Feb 24, 2015#179
Yes that's it... Although ECM wire orientation is on the opposite side of the Yaris.


Sent from my iPhone using Tapatalk
CoryMWhite Rock BC · Mar 4, 2015#180
Does anyone happen to have engine bay dimensions? I've looked in the collision repair part of the manual, but it's not from edge to edge.
Cheers.
fnkngrvIn The Hotbox · Apr 24, 2015#181
Are you still looking for dimensions Cory?
CoryMWhite Rock BC · Apr 24, 2015#182
Dimensions would be great if you have them. Otherwise I will post them when I measure (may be a while. Race-car is taking priority right now).

Cheers.
fnkngrvIn The Hotbox · Apr 24, 2015#183
Tell me exactly what you are looking for as the entire front end of mine is torn down.

Picture not included in this copy

Picture not included in this copy
CoryMWhite Rock BC · Apr 27, 2015#184
Sorry for the delayed reply. If the offer still stands, I would like the measurements in the photos. Looks like you already have white lines where the frame rails angle. All measurements are taken on top of the frame rails.
There is one more measurement I would like that isn't in the pictures. Could you also measure the square hole to the end of the frame rail (where the rad support bolts on.)?

Thanks for the help,
Cory

2 attachments not included in this copy

fnkngrvIn The Hotbox · Apr 27, 2015#185
I can see what I can do in the next day or two. The car is surrounded by kitchen cabinets :-)
fnkngrvIn The Hotbox · Apr 27, 2015#186
BTW, the white lines were where I was considering notching the frame rail for my IC piping, but we are going a different route.
CoryMWhite Rock BC · Apr 27, 2015#187
OK. I am in no hurry.
Cheers.
thebarberGrand Rapids, MI · May 4, 2015#188
Turbokits.com has 2zr turbo kits...
ilikericesavannah, ga · May 5, 2015#189
Couldn't find it. What is it listed under?
WorkTLSoCal · May 5, 2015#191
Will that turbo fit a 3rd gen Yaris by any chance?
CrankyOldManWest Michigan · May 5, 2015#192
Unfortunately, no. That kit is only for the 1.8L 2ZR-FE, which isn't available in the US as a factory option. It's entirely possible to do the swap though, just have to squeeze the details out of those that have successfully done it. =)
fnkngrvIn The Hotbox · May 5, 2015#193
The turbo would fit. It is rather small so wouldn't be a problem. You would have to do mods for the piping and manifold at the least.
WorkTLSoCal · May 5, 2015#194
Will the Scion xa turbo kit fit better?
fnkngrvIn The Hotbox · May 5, 2015#195
To a point, but you still will run into some modifications. That is why the Zage kit has been so popular. If not going the Zage it is probably just a smart thing to custom build.
fnkngrvIn The Hotbox · May 5, 2015#196
If I ever blow my built motor and manage to not be skinned alive by the wife I would try a 2gr swap. I think that would be epic. It is a hell of a mill. Makes my Highlander MOVE!
WorkTLSoCal · May 5, 2015#197
Thanks for the info! Where can I buy a Zage kit, sir?
fnkngrvIn The Hotbox · May 5, 2015#198
Try contacting Garm first. Cali_yaris.
Tarmat TerrorBarbados · Jul 28, 2015#199
Hey guys new to the mod world all the way from barbados , but i have a question , does anyone know if a 1zz engine can bolt into my Ncp13 which is the Vitz model right hand drive from japan and if any fabrication needs to be done and what would they be . thanks.😕
Tarmat TerrorBarbados · Jul 28, 2015#200
Originally Posted by Attitude ↑
Hello
ive got vitz with 1szfe, i am willing to swap the engine
the available engines in my country is 1nzfe, are you people in favour of that ? it comes bolt on, no issues
please reply thanks
yes thats fine the rs versions have in the 1nz-fe