let us know for those that have a 19mm sway bar.....
DIY - rear sway bar [pics]
198 posts · 157,468 views · page 3 of 4
Replies continued
I installed mine today and it feels like the front of the car is a little higher than the back, I hope thats normal.
I dont understand what you just said....??
I installed mine today and it feels like the front of the car is a little higher than the back, I hope thats normal.The sway bar does not change the ride height of the car - the part simply can't do that.
Originally Posted by wiliker ↑Sway bar installed today 😁 Even more fun to drive.
In what way?Originally Posted by fmicle ↑19 mm sway bar ordered from Garm, installed this weekend. Beautiful piece, perfect fit, easy install, the car handles much better! 🤘
also, bigger bar = stiffer ride? Can you even tell the difference (only 4 mm ?)
I see everybody on the thread says "better handling" "great handling" and other types of positive adjectives but all I get is that they're happy, I still don't understand how the rear bar improves handling in straight lines, with cross-winds. Does it make the car feel like it "sticks" better to the rd or am I looking at the wrong mod? 😕 Thanks.
I dread the winter coming, and crosswinds on the bridge 😲🤮
From my rear sway bar thread:Originally Posted by tomato ↑In what way?
also, bigger bar = stiffer ride? Can you even tell the difference (only 4 mm ?)
I see everybody on the thread says "better handling" "great handling" and other types of positive adjectives but all I get is that they're happy, I still don't understand how the rear bar improves handling in straight lines, with cross-winds. Does it make the car feel like it "sticks" better to the rd or am I looking at the wrong mod? 😕 Thanks.
I dread the winter coming, and crosswinds on the bridge 😲🤮
Originally Posted by Loren ↑Automotive design and engineering is all about compromises. The general public, especially the "commuter car" market, wants a car that is comfortable and handles predictably. Basically, they want an appliance. A couch that they can drive to work.
For these reasons, cars like the Yaris are designed with fairly soft suspension that handles most road conditions "comfortably" and the car is designed to handle predictably and safely. Predictable and safe handling for the average idiot driver means understeer.
Enter the rear swaybar. A rear swaybar's purpose is to increase rear roll stiffness. Increasing rear roll stiffness has a lot of effects, but the most obvious is a reduction in body roll and an improvement in steering response, which the "performance-minded" driver likes... but the general public might actually prefer the car to be less "twitchy" and prefer a little body roll that allows the suspension to lean in a turn instead of making THEM lean in a turn.
Increasing rear roll stiffness also changes the handling bias of the car and makes it less prone to understeer, or more prone to oversteer. The stiffer the rear of the car is made, the more likely it is to oversteer in an emergency maneuver. Toyota doesn't want the liability of putting the average idiot in a car that could oversteer unexpectedly, so they design their cars to understeer predictably.
Now, if Toyota wanted the rear roll stiffness to be greater on the Yaris... they wouldn't have fit a swaybar to it, anyway. It adds weight, complexity and expense, things that are considered greatly in the design of such a car. Even if they used the TRD/Ultra Racing design (a beam axle reinforcement rather than a true anti-sway bar), it would still add at least 7 parts to the car, one of them being a bar that requires complex forming and welding and heat-treating, the others being a pair of bolts, nuts and washers. (if they put a REAL swaybar on the car, the part count would be at least 3 times as many with brackets, end links, bushings, etc.) No, if Toyota wanted to add more stiffness to the back of the Yaris, they would simply have designed a stiffer beam axle assembly that allowed less twist or they would have fitted stiffer rear springs... either of which would create a compromise to the level of comfort that the car was designed for.
Um... what was the question again?
I think loren is the god when it comes to anything suspention related in the form of questions.
I think I might get me one just in time to be installed with my new Tokico shocks.
@ ControlAltDefeat: Thank you for reposting that. Great help!
As to Loren: 🙇🙇🙇 as usual!
As to Loren: 🙇🙇🙇 as usual!
Okay, so I'm going to try to write a more detailed review of the sway bar, more than "handles better" 😕
Sometimes you may have to make a sudden maneuver as to avoid something, a pothole, glass on the road, you name it. Usually when that happens, the car rolls in a way that feels quite unsafe. Usually the inner rear wheel (with respect to the direction you're turning) loses traction and you start to hear screeching.
With the sway bar, when you make a sudden turn, the body roll is greatly reduced and since the weight is redistributed to the rear inner wheel, the speed at which you start to hear screeching increases. The car simply feels like it's more under control in these situations. So, theoretically, if you don't change your driving patterns, you're less likely to lose control with this mod.
I have a few turns that I like to "push" on my way to work and the improvement is obvious to me. I can take those turns faster, without screeching and without the car rolling so much that you think the wheel is going to come off the ground.
I don't know if my explanation is good enough, the article that CtrlAltDefeat posted says is so much better and that's all there is to it.
Sometimes you may have to make a sudden maneuver as to avoid something, a pothole, glass on the road, you name it. Usually when that happens, the car rolls in a way that feels quite unsafe. Usually the inner rear wheel (with respect to the direction you're turning) loses traction and you start to hear screeching.
With the sway bar, when you make a sudden turn, the body roll is greatly reduced and since the weight is redistributed to the rear inner wheel, the speed at which you start to hear screeching increases. The car simply feels like it's more under control in these situations. So, theoretically, if you don't change your driving patterns, you're less likely to lose control with this mod.
I have a few turns that I like to "push" on my way to work and the improvement is obvious to me. I can take those turns faster, without screeching and without the car rolling so much that you think the wheel is going to come off the ground.
I don't know if my explanation is good enough, the article that CtrlAltDefeat posted says is so much better and that's all there is to it.
So the TRD sway bar is exactly the same thing but in red?
Thanks, appreciate it very much. You know some stuff gets lost in translation with me sometimes 😉Originally Posted by fmicle ↑Okay, so I'm going to try to write a more detailed review of the sway bar, more than "handles better" 😕 ...
... I don't know if my explanation is good enough, the article that CtrlAltDefeat posted says is so much better and that's all there is to it.
Sounds like an inexpensive but effective mod (not that I'm complaining about the way my car takes turns)
Has anyone realized NOTICEABLE improvement in handling in cross-winds after installing the rear bar?
I just bought the 19mm one today from Garm @ the Micro meet and waiting for my Tokico's to come in so I can put them both on at the same time. Hopefully I will have that done by next weekend and I will let you know. I will definately do some serious road testing, oh yeah.
I finally installed the sway bar yesterday with my Tokico Blues and all I can say is damn. I mean wean I road tested, it was way more stable than it was before on the handling and the sway bar itself man it felt like I was on rails when I would take turns real hard. But the wheels stayed planted to the ground and squeeled just a little bit but it was awsome.
Yes!
I just got the 23mm, I love it, also got DF210, all pics up on yarishouston.com soon!
Thinking about having a rear sway bar installed. How much does it weigh?
Its not that heavy maybe between 10-15lbs
we can order a rear sway bar at TOYO dealer and have it installed for $212 . This includes part and labor . We also have a coupon from dealer to make it less than $200 total . THANKS .
Garm's 19 mm Ultra Racing sway bar goes for $135 and the install is trivial... You shouldn't be paying more than $150 for this... or even more than $135 if you ask me 🙂
The install of my sway bar was the easiest mod I've done...
I wanted to add a few things I came across while installing the ultra 19mm on my '10 yaris.
Tools needed
1) 14mm socket and 14mm wrench
The factory nut has grooves on the flat side to grip the metal on which it will hold so when you place your sway bar on do not tighten from the nut side, tighten the bolt side while holding the nut with a 14 mm wrench as shown.
Picture lost · i99.photobucket.com
The supplied hardware is 11/16in nuts and bolts there may be a metric wrench that fits tighter but I did not have one and I had zero slippage with an 11/32in wrench and socket.
Picture lost · i99.photobucket.com
2) Im not sure if it is the same on all models but on the '10 model there is a curved piece on the shock mount (shown in red).
Picture lost · i99.photobucket.com
When you install the front bolts on the sway bar youll need to use a jack to flush the sway bar into place so the back bolts will lign up
Picture lost · i99.photobucket.com
I hope this is what its supposed to look like when done as I didnt see any other way it could fit.
Picture lost · i99.photobucket.com
Tools needed
1) 14mm socket and 14mm wrench
The factory nut has grooves on the flat side to grip the metal on which it will hold so when you place your sway bar on do not tighten from the nut side, tighten the bolt side while holding the nut with a 14 mm wrench as shown.
Picture lost · i99.photobucket.com
The supplied hardware is 11/16in nuts and bolts there may be a metric wrench that fits tighter but I did not have one and I had zero slippage with an 11/32in wrench and socket.
Picture lost · i99.photobucket.com
2) Im not sure if it is the same on all models but on the '10 model there is a curved piece on the shock mount (shown in red).
Picture lost · i99.photobucket.com
When you install the front bolts on the sway bar youll need to use a jack to flush the sway bar into place so the back bolts will lign up
Picture lost · i99.photobucket.com
I hope this is what its supposed to look like when done as I didnt see any other way it could fit.
Picture lost · i99.photobucket.com
A bit off topic but, would i need to completly remove the sway bar to install new springs or just loosen the front nuts and remove the rear?
r3b3l, thanks for the notes.
That's a 17mm bolt and nut that comes with it. All Yaris have that curve at the bottom of the shock perch/bracket. The sway bar is shaped to match.
If you do the front bolts first, you can leverage the bar into place to line up the shock bolts. I have also found that you only need to undo the shock bolts until they are just flush, not all the way out.
That's a 17mm bolt and nut that comes with it. All Yaris have that curve at the bottom of the shock perch/bracket. The sway bar is shaped to match.
If you do the front bolts first, you can leverage the bar into place to line up the shock bolts. I have also found that you only need to undo the shock bolts until they are just flush, not all the way out.
lowsushi, that sounds reasonable, although it's another few minutes to just take it off so it's not in your way at all.
yeah I know, just wanted to make it easier. dont think I will get around to installing my lowered shocks this week anyway with this rain. My garage just soaks up the water. I can hardly keep it up with out putting weights on the otherside to balance it out. Up to 40lbs now. I would hate for a weight to fall on the Yaris.
You have to weigh down your garage when it rains?🤷Originally Posted by lowsushi ↑yeah I know, just wanted to make it easier. dont think I will get around to installing my lowered shocks this week anyway with this rain. My garage just soaks up the water. I can hardly keep it up with out putting weights on the otherside to balance it out. Up to 40lbs now. I would hate for a weight to fall on the Yaris.
To keep the garage door open I need to counter-balance the weight of the rain soaked bottem portion with weights on the top part of the garage door when opened.
Just finished this install!
Great product, great price, great DIY!
Thanks MicroImage!
Picture lost · img63.imageshack.us
Picture lost · img526.imageshack.us
Picture lost · img168.imageshack.us
Picture lost · img191.imageshack.us
I really need to get a torque wrench...
Now to install the Tanabe strut bar!
Great product, great price, great DIY!
Thanks MicroImage!
Picture lost · img63.imageshack.us
Picture lost · img526.imageshack.us
Picture lost · img168.imageshack.us
Picture lost · img191.imageshack.us
I really need to get a torque wrench...
Now to install the Tanabe strut bar!
Hi i'm writing from Italy and i'd want to buy one rear sway bar for my yaris. I read many posts in forum toyotaclubitalia and one member who's named Suiller, has posted your photo how to installate sway bar; this member has writed that is possible to buy the bar from other member named Garm ??? Can you help me. Thanks a lot
Forum vendor this site name is Garm and owns/represents Micro Image. Look for posts by him and or google Micro Image.Originally Posted by Teledan71 ↑Hi i'm writing from Italy and i'd want to buy one rear sway bar for my yaris. I read many posts in forum toyotaclubitalia and one member who's named Suiller, has posted your photo how to installate sway bar; this member has writed that is possible to buy the bar from other member named Garm ??? Can you help me. Thanks a lot
Hey guys, just got a (stock) 2006 Yaris HB and thinking of doing this mod. How much does this mod (for both 19mm and 23mm) affect the understeer/oversteer balance? I'm looking to reduce the understeer and improve turning response, but I don't want it so extreme as to be losing the back end regularly. I don't want my wife to drive it and end up backwards in a ditch. My gut feel is that this won't be a problem, but does anybody have a comment from experience on how extreme the two sizes are with respect to terminal understeer/oversteer?
Also, anybody have experience ordering to Canada from MI?
Also, anybody have experience ordering to Canada from MI?
Yes. Garm will get it done for you. He ships worldwide.Originally Posted by pjh ↑Hey guys, just got a (stock) 2006 Yaris HB and thinking of doing this mod. How much does this mod (for both 19mm and 23mm) affect the understeer/oversteer balance? I'm looking to reduce the understeer and improve turning response, but I don't want it so extreme as to be losing the back end regularly. I don't want my wife to drive it and end up backwards in a ditch. My gut feel is that this won't be a problem, but does anybody have a comment from experience on how extreme the two sizes are with respect to terminal understeer/oversteer?
Also, anybody have experience ordering to Canada from MI?
i know this prob was answered but can some one refresh me...does the UR 19mm fit on 2010 sedan ?
Yes it will fit as the suspensions are identical for all sedans and HBsOriginally Posted by matthewai ↑i know this prob was answered but can some one refresh me...does the UR 19mm fit on 2010 sedan ?
^ correct, and thanks!
if i were installing an exhaust should i put the sway bar on after or before or does it not matter cuz im waiting for an exhaust now and also the mounting hardware for the bar just want to know what i should do first when i get both these...thanks
^ doesn't matter. an axle-back exhaust is two bolts and installs in 10 minutes or less. 👍
yeah didnt think so, awesome
How long does it take to fit the TRD sway bar? Do you need to take the rear wheels off? I want to do it myself but I don't have ramps/ axle stand so I'll probably have to pay someone else to :(
^ Takes about 30 minutes max. You can do it with the car on the ground if you're not lowered. It helps to jack up the the rear a little though to take the weight off the shock bolt (one of the two bolts that hold on the sway bar.
They are both good bars. if your wanting to just get rid of some understeer (and as a side benefit, make it less susceptible to cross winds, or big trucks and such) I would go with the 19MM if its a 3/5 door. If you want to really"go for it" then MAYBE the 23. I have a sedan and the 19mm by ultimate racing (microimage) It is definitely a vast improvement, worth every penny. That being said, if I did it all over again, with a sedan, I would go with the 23mm in a heartbeat. More overhang off the back end (sedan) would benefit more from the 23 than a 3/5 door would, without worrying about oversteer. Like I said, I love the difference over stock with my 19 but feel I could have gotten even better without sacrificing any ride or stability. I have wood plank ramps I use for oil changes. I just put them under the back end and drove it up on them. Basically a four inch rise. Didnt have to take offs wheels at all.Originally Posted by pjh ↑Hey guys, just got a (stock) 2006 Yaris HB and thinking of doing this mod. How much does this mod (for both 19mm and 23mm) affect the understeer/oversteer balance? I'm looking to reduce the understeer and improve turning response, but I don't want it so extreme as to be losing the back end regularly. I don't want my wife to drive it and end up backwards in a ditch. My gut feel is that this won't be a problem, but does anybody have a comment from experience on how extreme the two sizes are with respect to terminal understeer/oversteer?
Also, anybody have experience ordering to Canada from MI?
Sway bar is a must have item. I love my TRD one...
wait where did the original pictures go ?
I'm glad someone mentioned that the sway bar will reduce understeer because that's one of my main complaints.
seriously i need those orig pics i wanted to check this before i get under there damn they are still gone?
Just installed the UR bar from MicroImage this weekend. It literally took one day to get to me (also in SoCal).
I installed it without jacking up the car and removing the wheels at around 11pm on Friday night, so I didn't get a real good look at how it fit. All I needed were racheting box wrenches (14mm & 17mm) and a torque wrench with 14mm / 17mm sockets.
Anyway, just want to mention 2 things that may or may not have been mentioned before regarding the swaybar:
1) It took longer to peel that saran wrap off the bar (the bar is completely wrapped in it) than it did to install it.
2) I had to loosen up the bolts and pull the bar down further after a test drive (there's at least 20mm of adjustment available). I initially had one end of the bar almost touching the rear torsion beam. During the test drive, it would touch and clank. Loosened, pulled the bar way down, then re-tightened. All is well.
I installed it without jacking up the car and removing the wheels at around 11pm on Friday night, so I didn't get a real good look at how it fit. All I needed were racheting box wrenches (14mm & 17mm) and a torque wrench with 14mm / 17mm sockets.
Anyway, just want to mention 2 things that may or may not have been mentioned before regarding the swaybar:
1) It took longer to peel that saran wrap off the bar (the bar is completely wrapped in it) than it did to install it.
2) I had to loosen up the bolts and pull the bar down further after a test drive (there's at least 20mm of adjustment available). I initially had one end of the bar almost touching the rear torsion beam. During the test drive, it would touch and clank. Loosened, pulled the bar way down, then re-tightened. All is well.
^ good to know about the range of position.
I'm not responsible for the saran wrap. 🙂 I guess it helps prevent scratching, they come all the way from Malaysia!
I'm not responsible for the saran wrap. 🙂 I guess it helps prevent scratching, they come all the way from Malaysia!
One quick question for you guys, I've raced several different brands of front drive racecars, all that I've removed the front swaybar completely. Will the Yaris handle better with this setup, or has anyone tried this on their cars. I'm wanting to buy a Yaris very soon, but would kinda like to know up front what mods work best!!
My previous racecar was a Nissan Pulsar, that when in race trim had a 7/8" rear sway and Carrera inverted shocks set at max and a set of SSS Blue-Coil 295 ft.lb. springs. The front was a set of custom struts with coil-over 350 ft.lb. springs and Koni Sports inserts, with the front swaybar removed, the car handled like a go-cart. Any advice on what works best would be great!!
My previous racecar was a Nissan Pulsar, that when in race trim had a 7/8" rear sway and Carrera inverted shocks set at max and a set of SSS Blue-Coil 295 ft.lb. springs. The front was a set of custom struts with coil-over 350 ft.lb. springs and Koni Sports inserts, with the front swaybar removed, the car handled like a go-cart. Any advice on what works best would be great!!
cant see photos
Originally Posted by cali yaris ↑Today we installed an Ultra Racing rear sway (anti-roll) bar on Babie Y's Yaris. I took a few pics, hope this is helpful.
First, jack up the back of the car (from the sides) and remove the rear wheels. This makes it easier to get to the bolts later.
Then, get out your sway bar. A friend, helper, bodyguard or whatever helps.
Picture lost · www.microimageonline.com
Look under the car. There is one large bolt holding the bottom of the rear shock. You can re-use this bolt. There is also a hole that isn't being used just in front of it, like this:
Picture lost · www.microimageonline.com
Here is the same two holes, shown from the inside angle instead:
Picture lost · www.microimageonline.com
Remove the bolt holding the shock. Place the swaybar with the bar at the bottom and so the holes line up. Re-install the bolt through the shock, then the sway bar, then a washer and nut. ***It is easier to do both shock bolts first, leaving the sway bar hanging -- then do the two front bolts.
That should look like this:
Picture lost · www.microimageonline.com
And like this:
Picture lost · www.microimageonline.com
Tighten and/or torque the nuts and you're done. In another thread there was consensus that "making them tight, but not crazy tight" was good enough for this.
thanks to supmet:
Go drive the car, high-five your bodyguard... and have a nice day.
* (check and re-tighten, if needed after driving for a few days).
* the Ultra Racing sway bar comes with hardware -- I'm sure the TRD one does, too.
* Yes, that is a Tokico shock. 🙂