Yarisworld Archive

DIY - rear sway bar [pics]

198 posts · 157,468 views · page 2 of 4

Replies continued

kacWest/Central Illinois · Aug 1, 2009#51
Suweet thread. definitely ordering a UR rear sway bar from you just for posting this!
RedRideMiddletown, NY · Aug 1, 2009#53
UPS just delivered Garm's sway bay (23mm) to me yesterday. 😁
YAR1SRaleigh, NC · Aug 1, 2009#54
well damn..... now im nervous.... maybe I wont be putting this on after all unless someone helps me out.... :/
CTScottUSA, CT · Aug 1, 2009#55
Originally Posted by YAR1S ↑
well damn..... now im nervous.... maybe I wont be putting this on after all unless someone helps me out.... :/
You really should be able to do it yourself, especially since you still have stock wheels.
CtrlAltDefeatIndianapolis IN · Aug 2, 2009#56
no don't be nervous, if I could do it, you can do it 👍
KioshiFremont, CA · Aug 3, 2009#57
Just an update w/ my situation...i got the sway bar today and put it on without removal of tires...barely squeezed it in, hell yes~

All that remains is to torque the two bolts above the shock bolts... :( if its possible
Can't believe how little room is below this car, ughh

Sway bar review will be done by tomorrow :)

EDIT: no band aid needed Garm haha.

And YAR1S, its easy to install, trust me...i'm lame at diy stuff...if i can do it, it'll be piece of cake for you :)
RedRideMiddletown, NY · Aug 4, 2009#58
OK..... got my 23mm sway bar installed today! 😁

I didn't do it myself though. A new auto repair shop (performance oriented) recently opened up right accross the road from my apt complex.
When I went to to them yesterday to get a price for rebuilding the brakes on my Celica , I liked what the owner told me. I then mentioned the Yaris sway bar and he said he could install it in a few minutes.
So I let him install it. He charged me $30 which is cheap in this area.
He now is working on my Celica. It looks like I got a new repair shop/mechanic. 🙂

Anyway.........How do I like the sway bar? It's great! It makes a very noticeable improvement in the the Yaris' cornering/handeling and much of the understeer is gone. I haven't noticed any down side yet and don't expect any.

If anyone is still on the fence about wether to get one or not...... just get it! 🙂
KioshiFremont, CA · Aug 4, 2009#59
you didnt do it yourself?! WHYYYYYY...... i did my install at like 8pm w/ no light what so ever lol... it was fun installing it with tires on the car...
RedRideMiddletown, NY · Aug 4, 2009#60
I was going to do it myself as it seemed very easy.

However, at 62 years old I though I would let someone else have some fun for a change. 😉
It's also been hot and very humid around here lately and that just saps my ambition.

Also, good/ mechanics/repair shops are had to find and I sort of wanted to feel the "new" shop out before I gave them my Celica to work on.

So, how do you like your sway bar?
markitectMichigan · Aug 4, 2009#61
Went to my first Open Track Day with my 23mm UR bar installed. The car handles extremely well for that being my only mod (and some azenis 615 tires).
cali yarisThread starterCanoga Park, CA · Aug 4, 2009#62
redride, that is a great inexpensive way to "test" a shop. Did they torque the bolts correctly, doing the job "to spec", so to speak?
KioshiFremont, CA · Aug 4, 2009#63
Originally Posted by RedRide ↑
I was going to do it myself as it seemed very easy.

However, at 62 years old I though I would let someone else have some fun for a change. 😉
It's also been hot and very humid around here lately and that just saps my ambition.

Also, good/ mechanics/repair shops are had to find and I sort of wanted to feel the "new" shop out before I gave them my Celica to work on.

So, how do you like your sway bar?
Oh i see, understood.
I tested it out on the on ramp, but didn't notice much (couldn't push the speed of the car)....too many cops lurking around California nowadays because of budget crisis~~
I did some hard lane changes on the freeway and the car feels stiff a LOT, I LOVE IT. Best bang for the buck, i swear...
RedRideMiddletown, NY · Aug 6, 2009#64
Originally Posted by cali yaris ↑
redride, that is a great inexpensive way to "test" a shop. Did they torque the bolts correctly, doing the job "to spec", so to speak?
I doubt that they torqued the bolts.
To be honest, if I installed it, I wouldn't have torqued them either (even though I have a torque wrench) due to the limted room when installing it on the ground with the wheels still on.
Ater a while one gets a feel just just by looking at a bolt and its application to determine how much to tighten it.

So far, eveything seems tight as it should be.
I will check them is a couple of weeks to be shure they are still properly tight.

I really like my sway bar. 🙂
cali yarisThread starterCanoga Park, CA · Aug 6, 2009#65
^ I might not torque this kind of part either -- but I think a professional shop would, just because if it falls off later, they know they did it do spec. Did they ask what the torque spec should be?
DerFlosserUSA · Aug 6, 2009#66
Most good mechanics can come within a few ft-lbs by feel.
omendtOhio · Aug 7, 2009#67
Can anyone recommend/give advice upon buying the 19mm sway bar vs. the 23mm sway bar? Any advice and recommendations are greatly appreciated!
tk-421Dagobah · Aug 7, 2009#68
Other than price, I don't see why one would choose the 19mm over the 23mm.
RedRideMiddletown, NY · Aug 9, 2009#69
If there is any downside to the sway bar it is that it does reveal the limitations of the crap OEM tires. (I got the aweful Goodyear LS tires) This is due to the fact that you can now take corners faster., etc.

I got my eye on a set of "Michelin Harmonys" eventually.
Henry G.So Cal. · Aug 9, 2009#70
Originally Posted by RedRide ↑
If there is any downside to the sway bar it is that it does reveal the limitations of the crap OEM tires. (I got the aweful Goodyear LS tires) This is due to the fact that you can now take corners faster., etc.

I got my eye on a set of "Michelin Harmonys" eventually.
Try putting 40 psi in them they work a lot better.
RedRideMiddletown, NY · Aug 9, 2009#71
Yeah, I might increase the air pressue a bit for now. It wont be before this spring that I will get new tires. That's assuming I make through the winter with the Good Years.
Inspector14Anchorage, AK · Aug 10, 2009#72
I have a question about my bar that i installed a few months ago.

i am now seriously looking at installing the TRD suspension pack (no springs, not going to lower and drive alaskan icy/snowy roads)

will the UR bar i have void the suspension warranty? guess i could just take it off (rather not)
KioshiFremont, CA · Aug 10, 2009#73
It won't void warranty unless it IS the cause of the damaged area to your car. But you can always take the bar off before going into dealers to check if something near the rear was damaged....

Seriously, all in all, TRD bar is the same as the UR that Garm sells.....lol
I didnt notice a difference w/ my TRD vs Garm's UR bar...i just wanted ONE TRD part on my car :P
tk-421Dagobah · Aug 11, 2009#74
Originally Posted by Kioshi ↑
i just wanted ONE TRD part on my car :P
Same reason why I bought a TRD radiator cap. 😆
KioshiFremont, CA · Aug 11, 2009#75
Originally Posted by tk-421 ↑
Same reason why I bought a TRD radiator cap. 😆
Damn, should've gone w/ that instead, would've cost me less😛
Inspector14Anchorage, AK · Aug 11, 2009#76
well, i have no damage to the area.

i just dont want to order the TRD suspension stuff, and have kendall jack my car up and see that i have added a component, or modified from factory spec. and void the warranty that would be otherwise kept intact installing TRD components by a toyota dealer.
KioshiFremont, CA · Aug 11, 2009#77
Well, most mechanics dont care what you have inside/outside the car....its those stupid service people that get you setup for a check-up that whine like little girls about non Toyota aftermarket parts...

I mean....there is a front sway bar on the Yaris, would a rear sway bar cause so much damage/ void warranty? Nope, not at all....

Usually adding components to engine bay or modifying movable suspension parts voids warranty ie.... aftermarket lowering springs, coilovers, struts/shocks, etc.... a simply 19mm bar? They're b.s you if they say anything, honestly..
DOMAVMALTA · Aug 12, 2009#78
how will this effect the ride??

forget how well the road holding is (its hard but try) how will the car drive in normal driving speeds in the city, and over bump roads??

is there a front sway bar too?
cali yarisThread starterCanoga Park, CA · Aug 12, 2009#79
^ I don't notice any difference in a straight line, only in turns and against crosswinds.

There is a front sway bar available in a 24mm size, made by AOE.
KioshiFremont, CA · Aug 12, 2009#80
Our cars already have a front sway bar...its 22mm or 23mm last i read somewhere when they measured it.

My experience SO FAR, driving/owning it for 7 days straight......it doesnt make a difference on bumps, only your tire psi will make a difference w/ that~ Mine are at 42 psi so i feel everything :P

Like cali yaris has said, only differences noticed during turns and big SUVs passing you up on freeway.....
YAR1SRaleigh, NC · Aug 12, 2009#81
Originally Posted by Kioshi ↑
Just an update w/ my situation...i got the sway bar today and put it on without removal of tires...barely squeezed it in, hell yes~

All that remains is to torque the two bolts above the shock bolts... :( if its possible
Can't believe how little room is below this car, ughh

Sway bar review will be done by tomorrow :)

EDIT: no band aid needed Garm haha.

And YAR1S, its easy to install, trust me...i'm lame at diy stuff...if i can do it, it'll be piece of cake for you :)
awww thanks... I will try this out soon ... I hope.
RedRideMiddletown, NY · Aug 13, 2009#82
Originally Posted by DOMAV ↑
how will this effect the ride??

forget how well the road holding is (its hard but try) how will the car drive in normal driving speeds in the city, and over bump roads??

is there a front sway bar too?
It wiil make the rear suspension seem slightly stiffer at times but in a good way.
IMO without the sway bar, the rear suspension seems much too soft.
With the sway bar, it no longer seems like you are driving a boat. 😉

To me, it simply makes the car more fun to drive.
DOMAVMALTA · Aug 13, 2009#83
and what does the upper front strut do?

in event of an accident the rear sway bar can cause more damage IMO cause if you get hit on one on the wheel the other side is effected, Am i right or not?

cheers
RedRideMiddletown, NY · Aug 15, 2009#84
Originally Posted by DOMAV ↑
and what does the upper front strut do?

in event of an accident the rear sway bar can cause more damage IMO cause if you get hit on one on the wheel the other side is effected, Am i right or not?

cheers
Not really. Since we have a beam axle, both sides of the rear suspension are already conected.

It can be argued that a rear sway bar can possibly prevent some damage as it strengthens the whole rear axle/suspension assembly.
DOMAVMALTA · Aug 16, 2009#85
Originally Posted by RedRide ↑
Not really. Since we have a beam axle, both sides of the rear suspension are already conected.

It can be argued that a rear sway bar can possibly prevent some damage as it strengthens the whole rear axle/suspension assembly.
thanks a lot i'm new to yaris i had it only for 2 weeks and i find the handling very good maybe cause its lowered on the tte, still i say my alfaromeo 156 handles better but for what i paid for its very good
2+2Michigan · Aug 16, 2009#86
Originally Posted by tk-421 ↑
Same reason why I bought a TRD radiator cap. 😆
Shrewd, very shrewd. I like your thinking. 👍
RevssonSoutheast Wisconsin · Aug 17, 2009#87
Originally Posted by 2+2 ↑
Shrewd, very shrewd. I like your thinking. 👍
Or are they frugal?
tk-421Dagobah · Aug 17, 2009#88
Originally Posted by Revsson ↑
Or are they frugal?
Not really... I just like spending the big bucks where it counts. Spending 300% extra on a part that says "TRD" and that won't even be visible most of the time is not my idea of a good investment.

Sorry for the

Getting back to the UR sway bar, I have been using it for a couple of months now, and I must say it is one of the best handling mods you can make, along with lowering springs.
sternzMilford, PA · Aug 29, 2009#89
Thanks cali yaris, just installed my 23mm sway bar.
omendtOhio · Aug 29, 2009#90
Thanks garm, just installed my 19mm sway bar and it makes a HUGE difference. I can't believe what a difference this makes! 19mm is just perfect for my driving style, and you cant' beat the price.

Thanks to everyone that left their opinions and recommended this upgrade!
wilikerHercules,CA · Sep 15, 2009#91
Just received my 23mm sway bar from Garm. Will install this coming weekend, can't wait 😁
chongopantsHouston · Sep 15, 2009#92
yeah send pics I am gonna get a 23mm this weekend
wilikerHercules,CA · Sep 20, 2009#93
Sway bar installed today 😁 Even more fun to drive.
chongopantsHouston · Sep 20, 2009#94
lucky... its my next purchase
fmicleSan Jose, CA, USA · Oct 5, 2009#95
19 mm sway bar ordered from Garm, installed this weekend. Beautiful piece, perfect fit, easy install, the car handles much better! 🤘

Now I'm wondering if I should give up the hitch or the spare wheel and the jack to compensate for the added weight 😁

I'll probably try without the spare for a week and see if I feel any difference 😎
cali yarisThread starterCanoga Park, CA · Oct 5, 2009#96
^ Thanks, glad you like it. Plenty of both sizes in stock at this time. 👍
Cvc9216MD · Oct 15, 2009#97
I'm a little confused about the rear sway bar. Granted I haven't done anything to my yaris or even looked at the suspension. But since the rear is a solid beam type and this just bolts to the two sides, wouldn't this be more of a "brace" than a real "sway bar"? Is the rear suspension beam that flexy?
ddongbaphay · Oct 15, 2009#98
Yes, it is.
cali yarisThread starterCanoga Park, CA · Oct 15, 2009#99
No, it's not merely a brace. Technically it is a torsion bar.

Your beam axle does nothing to transfer weight in cornering -- that's why this bar is effective.
LazerdotEuless Texas · Oct 15, 2009#100
The 23mm Ultra Racing bar is noticably stiffer. I have to believe I'll see a difference at the AX.