richardholdenerOriginal postLas vegas, NV · Dec 18, 2008#1Sorry for the delay, but here is what the Yaris intake is going to look like. It bolts right on (I will provide photo of intake on with all lines and fittings during testing). Though you guys might like to see it with optional NOS fogger in place-NOS bungs will be an option. We will probably never use the nitrous on the yaris but it sure looks cool. I want to do some more testing with this and we may alter the plenum slightly for aesthetics. Enjoy.
1 attachment not included in this copy
Replies 94
tuckevalastinDelaware/Connecticut · Dec 18, 2008#2🤤
Malaya1221Torrance, Ca · Dec 18, 2008#3lucky bastards!🙂
mikenacaratoBrentwood, TN · Dec 18, 2008#4omg im so glad i hopped on this buy, very nice work richard!!! you are very good at your trade sir!
ChupacabraCT · Dec 18, 2008#5sweet.
richardholdenerThread starterLas vegas, NV · Dec 18, 2008#6Forgot to mention, there will be no welds on the intake runners-they will be 1 piece-this was done to facilitae the proper radius bends which will be duplicated by our tubing guy.
mikenacaratoBrentwood, TN · Dec 18, 2008#7hehe i like the look of welds though...makes it look super custom. will these manifolds have the bungs for the no2 stuff but plugged off?
edit: read more closely above. whats the price difference to have bungs installed with removeable plugs?
richardholdenerThread starterLas vegas, NV · Dec 18, 2008#8We are working out pricing now on the NOS bungs-actually a lot of work to drill necessary holes, machine bugs (including taping for nos nozzles) and properly align fittings before welding. They will be filling with small pipe plugs when not in use.
Originally Posted by
mikenacarato ↑ hehe i like the look of welds though...makes it look super custom. will these manifolds have the bungs for the no2 stuff but plugged off?
edit: read more closely above. whats the price difference to have bungs installed with removeable plugs?
richardholdenerThread starterLas vegas, NV · Dec 18, 2008#9Also note that super thick tb flange can be machined or ported to accept larger Xd throttle body. It can also be drilled and tapped for single nitrous fogger nozzle.
mikenacaratoBrentwood, TN · Dec 18, 2008#10i see that. very good thinking! se we can use any aftermarket CAI without having to trim pipes and such?
1NZYaris1New Zealand · Dec 18, 2008#11🤤🤤i wish i could afford one of those, just as well dreams are free.
you the man Richard🙇🙇🙇🙌
GideonSunnyvale, CA · Dec 18, 2008#12Awesome looking! Can't wait to spend my money on it. 😆
cali yarisCanoga Park, CA · Dec 18, 2008#13hmm... to NOS or not to NOS.... that is the question
thepocheMontreal · Dec 18, 2008#14oh man, that made my day 🎉
TEHxFALLEN V1.2Calabasas, CA · Dec 18, 2008#15Nice work Richard!
PETERPOOPOahu · Dec 18, 2008#16send this to me already. when you taking my credit card #!?
N3misiSSouth Africa · Dec 19, 2008#17Guys, well done!
THis is some awesome work!
🤤
wow ready and waiting.i dont want the extra holes for nitrous,thank you.
mikenacaratoBrentwood, TN · Dec 19, 2008#19ya, i guess i wont worry about them either
lilredrocketDFW, Texas · Dec 19, 2008#20THANK YOU!!! for choosing the Yaris. Can't wait to get one!!!
so i am guessing this will be sometime january,which i dont mind. thank you for doing this for the yaris world community.👏🙌
mikenacaratoBrentwood, TN · Dec 19, 2008#22ya i definately dont mind paying in january, because of xmas im super stressed for cash. im hoping i dont have to transfer my saved money in paypal back to my bank account.
blacksandiegovitzJust chillin' out brah ! · Dec 19, 2008#23Yes , Im super stoked man ! So I take it that the tb elbow is drill for the stock yaris tb and I'd just have to drill it for the xD tb ?
i think it bolts are the same you just need it the opening ported out.
ztrack157Biggs, CA · Dec 19, 2008#25Nice intake. Would have posted sooner but had to wipe down the computer after I saw the picture.
blacksandiegovitzJust chillin' out brah ! · Dec 19, 2008#26 Originally Posted by
kou ↑ i think it bolts are the same you just need it the opening ported out.
Oh , thats even easier . I've done some heavy port jobs on 4g63 cast turbo manifolds , so porting the tb opening should be cake.
mikenacaratoBrentwood, TN · Dec 19, 2008#27oo want to do my 4g63 manifold? haha nah ive got an upgraded one im jp...this engine is in a volvo btw :)
CASTREXCosta Rica · Dec 19, 2008#28Richard,
Will the xD manifold look anything like this one?
SabretoothSt Cloud FL · Dec 19, 2008#29So when is the projected finish date for the Manifold?
pinoypizzaboylas vegas/ henderson · Dec 19, 2008#30I WANT IT NOW!! awsome job richard. paying cash money baby$$$
richardholdenerThread starterLas vegas, NV · Dec 19, 2008#31We are still working on design for Xd, but it could look a lot like this since the layout of the stock Xd intake is similiar.
Originally Posted by
CASTREX ↑ Richard,
Will the xD manifold look anything like this one?
pinoypizzaboylas vegas/ henderson · Dec 19, 2008#32i guess with this badboy i can own my buddys integra LS!! so exited!
NonStopTuningUSA · Dec 19, 2008#33EXCELLENT WORK SIR!!!!
👍👍
Kaotic LazagnaCentral Valley, CA · Dec 19, 2008#34🤤
ChupacabraCT · Dec 19, 2008#35Richard,
How exactly is this intake designed/tuned(in terms of a system)? Obviously it was designed and engineered as part of an entire system (likely camshafts included with LTH). I can't see taking the time and energy designing something like this unless it was part of a "bigger picture/system" which included some interior motor work etc. So...before anybody gets too excited about the manifold, what type of gains might one see using only say, this intake plenum and a stock exhaust with zero motor work? What I am trying to get at is....it's very likely that this is only a little piece of something that is much bigger and more expensive so some may want to strap on their seatbelts to know that the whole system is thousands, excluding the mechanical work (if they cant' do it themselves). Not tyring to be a "downer" at all...just want to get a bit of a clearer picture.
ChinoCharlesOH · Dec 19, 2008#36 Originally Posted by
cali yaris ↑ hmm... to NOS or not to NOS.... that is the question
Why is that even a question? 😆
Looks freekin' fantastic Richard. Cannot wait.
cleongSingapore · Dec 19, 2008#37 Originally Posted by
Chupacabra ↑ Richard,
How exactly is this intake designed/tuned(in terms of a system)? Obviously it was designed and engineered as part of an entire system (likely camshafts included with LTH). I can't see taking the time and energy designing something like this unless it was part of a "bigger picture/system" which included some interior motor work etc. So...before anybody gets too excited about the manifold, what type of gains might one see using only say, this intake plenum and a stock exhaust with zero motor work? What I am trying to get at is....it's very likely that this is only a little piece of something that is much bigger and more expensive so some may want to strap on their seatbelts to know that the whole system is thousands, excluding the mechanical work (if they cant' do it themselves). Not tyring to be a "downer" at all...just want to get a bit of a clearer picture.
In another
thread, Richard posted a dyno shoot showing 25hp and 13lb/ft gain at the wheels
"
......using a CAI (actually flipped over stock filter lid), the new intake manifold, long-tube header and 2.25-inch exhaust, NST u-pulleys & Xd Tb"
YarisPRMayaWest, Puerto Rico · Dec 19, 2008#38.......... I better leave the girfriend and save the money ......... 😁🤣🍻
revoturboIndonesia · Dec 19, 2008#39H...hmmmm... GREAT!!!! 👍
baked_limabeansLouisiana · Dec 19, 2008#40damn i wish i had the money for this.😢
Originally Posted by
YarisPR ↑ .......... I better leave the girfriend and save the money ......... 😁🤣🍻
😆😆
+1 same here
cali yarisCanoga Park, CA · Dec 19, 2008#42Chupacabra, use the seach feature and read the other thread(s) about this intake. This thread is just a picture showing off the production piece. (And I'm so glad he made it real for all those that wanted a picture).
It is designed to be bolted onto a stock motor and provide a significant gain in hp. Period.
In addition, it can be used on a built motor or a turbo motor (or both, as I intend to do).
richardholdenerThread starterLas vegas, NV · Dec 19, 2008#43Thanks for the concern, but as indicated by Cali-the intake was designed to offer power gains with no other chnages to the motor. This is why I have posted so many power numbers from our extensive dyno testing before running a photo of the actual intake. Having tested this intake in every possible combination, it adds power over the stock intake regardless of the level of modifications (from stock to the mods listed in the thread on the 123 wheel hp).
Originally Posted by
Chupacabra ↑ Richard,
How exactly is this intake designed/tuned(in terms of a system)? Obviously it was designed and engineered as part of an entire system (likely camshafts included with LTH). I can't see taking the time and energy designing something like this unless it was part of a "bigger picture/system" which included some interior motor work etc. So...before anybody gets too excited about the manifold, what type of gains might one see using only say, this intake plenum and a stock exhaust with zero motor work? What I am trying to get at is....it's very likely that this is only a little piece of something that is much bigger and more expensive so some may want to strap on their seatbelts to know that the whole system is thousands, excluding the mechanical work (if they cant' do it themselves). Not tyring to be a "downer" at all...just want to get a bit of a clearer picture.
pickledchangWashington State · Dec 19, 2008#44its BEAUTIFUL! cant wait to see the xD's. after seeing this photo, i think im going to avoid getting it powder-coated.
justjesusOrange County · Dec 19, 2008#45That's a nice piece. Drooling over the Nitrous lines!
i just had to come back and see it one more time before i go to work.....
o yea thats a sexy intake...cant wait to take you home and...er well...install you :)
ChinoCharlesOH · Dec 19, 2008#47I printed a picture so I could carry it around with me. I make frequent restroom stops.
richardholdenerThread starterLas vegas, NV · Dec 19, 2008#48Thanks for all the kind words-it was a lot of work and we still have some final testing to do before starting the production run. Sory for th edelay-but I want the intake perfect beforeit goes into production to ensure everyone is completley satisfied with their purchase. Each will have serial number-intake in the photo is DRXP001 (Dynatek Racing Experimental prototype 001).
mikenacaratoBrentwood, TN · Dec 19, 2008#49oooh sweet. im excited
ChupacabraCT · Dec 19, 2008#50Ah....I don't know how I missed the thread!!!
Yaris Intake Manifold Richard,
Any chance in having this produced in CF?