LorenOriginal postSafety Harbor, FL · Nov 28, 2008#1Installed the DC header today. Didn't pay much attention, but it probably took about an hour, maybe a little longer. It's almost as easy as most people would have you believe, though having thin arms with more than the normal number of joints would surely help.
The fit and finish is almost perfect. More accurately, the fit is PERFECT, and the finish is about 95%. Some of the welds could be a little neater, but nothing to complain about at all. All of the stock hardware, brackets and 02 sensor fit without issue.
For those of you shopping for a quality bolt-on header, I think this is really the one you want. (at least until Richard Holdener gets his in production... but to use that one, you have to be willing to give up your catalytic convertors) Every other header I've seen for the Yaris is just a copy of the stock header with larger tubes. Maybe good for a few hp at the top end, but not much else. The DC header design combines longer primary tubes, which move the torque peak down a few hundred rpm, with larger tubes and a MUCH cleaner flow for more high-end power. The net result is more torque throughout the range. Like experienced racers have been saying since the dawn of time: horsepower sells cars, torque wins races.
No dyno results, and I probably won't ever bother getting any, but this header can be felt even at low rpm and low throttle inputs... and when you get on it at anything above 2500 rpm, it feels A LOT stronger. In short, it seems to work just exactly the way I expected it to based on its design. I'm very pleased with it.
I took some comparison photos and measurements of the stock Yaris header vs the new DC Sports header. The primary tubes of the stock header are 1-1/8″ ID, the DC header is 1-3/8″. The collector output of both of them is the same at 1-3/4″. Look at how tight the bends are on the stock header compared to the smooth flow of the DC. And the stock primaries are about 6-8″ long compared to about 14″ on the DC. And the DC header has a nice ceramic coating on it that should retain the heat for better exhaust velocity. Good stuff.
Thanks to YW member "Return of the Yarii" for giving me a great deal on this header!
1 attachment not included in this copy
Replies 201
nice
thewifesyarisReno, NV · Nov 29, 2008#3Good review, this was the manifold I was looking to purchase.
This will help nudge me towards getting one.
Still need the midpipe though, wish my Greddy exhaust was cat-back, but I'll have to look into getting the nitto midpipe as well if I was to buy a manifold.
PETERPOOPOahu · Nov 29, 2008#4heard most aftermarket headers make you lose torque and minimal gains at high rpms. i'd have to see a dyno over hearsay.
largeorangefontSo Cal, OC · Nov 29, 2008#5 Originally Posted by
PETERPOOP ↑ heard most aftermarket headers make you lose torque and minimal gains at high rpms. i'd have to see a dyno over hearsay.
A properly designed header will give you power gains across the RPM range.
The DC header's performance is exactly how Loren decribed it. The DC header is designed to provide low-midrange torque, as well as high RPM gains.
cali yarisCanoga Park, CA · Nov 29, 2008#6The stock header also pinches the tubes right before the collector -- totally restrictive.
heard most aftermarket headers make you lose torque and minimal gains at high rpms.
I made 15 whp increase (on the dyno) from intake, header, pulleys and axle-back exhaust. Peterpoop, I think you are incorrect that the header didn't account for any of that gain.
cleongSingapore · Nov 29, 2008#7I'm of the opinion that there's actually less low down torque (idle to 2000rpm) with the DC header, which makes the 2500rpm RPM surge more noticeable.
Losing low down torque isn't a bad thing though, it makes it smoother to drive when you're taking it easy, and when you are driving aggressively you're never in that RPM range also.
But sometimes when you're caught two gears too low, the car doesn't want to accelerate!
LorenThread starterSafety Harbor, FL · Nov 29, 2008#8With my lightweight crankshaft pulley, I might not be noticing that so much, but you could be right. Sub-2k isn't really relevant to performance driving, anyway. 😉
PETERPOOPOahu · Nov 29, 2008#9 Originally Posted by
cali yaris ↑
I made 15 whp increase (on the dyno) from intake, header, pulleys and axle-back exhaust. Peterpoop, I think you are incorrect that the header didn't account for any of that gain.
I never stated that the header doesn't give gains at higher rpms or gains at lower. I just said that I "heard" that's what most headers do.
Too many other mods involved with that dyno.
I'd like to see a bone stock yaris with a dc header and the dyno # it puts down oppossed to the stock header. And not a dyno that DC provides.
🙂
*If I decide to put the turbo on hold I'll definately go with Richard's setup.
LorenThread starterSafety Harbor, FL · Nov 29, 2008#10For $165, I took the gamble of not having a clear dyno chart available for this header. Instead, I did my research and looked at the design of the header and decided that it would likely provide improvements in the areas that I wanted them. I was NOT disappointed, and I wouldn't be disappointed if I spent full-retail price for it.
Do what'cha want, Peter. As far as bolt-on replacement headers for the Yaris that don't require complete replacement of the exhaust system and/or deletion of the cats... this is it.
I have a G-Tech on my desk, as soon as I get a tire fixed (picked up a piece of utility knife blade last week that ripped a 3" long gash in the tread of one of my rear tires!) I'll try to do some 0-60 runs. As I recall, last time I did that, I was able to get pretty consistent 8.2 seconds. I didn't do any testing after the crank pulley, so whatever improvement I see will be the combination of the pulley and header.
largeorangefontSo Cal, OC · Nov 30, 2008#11I have a light crank pulley as well and I didn't notice any softening below 2K RPM either. In fact, off idle response was improved.
dallasCanada · Apr 10, 2009#12Loren, did you ever G-tech the header and pulley, I think thats more important than a dyno. Just do it in the same spot and at around the same outside temperature.
YarisSedanCalifornia - Bay Area · Apr 10, 2009#13I really want these headers now. Does anyone have a cheap used set for sale =).
GrandieriSpokane, Wa · Apr 10, 2009#14 Originally Posted by
YarisSedan ↑ I really want these headers now. Does anyone have a cheap used set for sale =).
I agree.Loren where did you find them for 165?
The SpectacleTampa, FL · Apr 10, 2009#15He bought it used.
tk-421Dagobah · Apr 10, 2009#16I'm still torn between this and the W*R 4-2-1 header. I really don't want to lose low-end power if at all possible, and I've heard the 4-2-1 design helps in this department.
LorenThread starterSafety Harbor, FL · Apr 10, 2009#17True, a 4-2-1 is known for providing better low-end torque, but I don't think it's possible to cram a proper 4-2-1 design into the space available. Only way to do it is to do what Richard has done and eliminate some of the mid-pipe in favor of longer header tubes.
You won't lose anything with the DC header.
Yaris2910brunei · Apr 10, 2009#18how about the header that is selling on ebay?
any comments non dc header type.....
LorenThread starterSafety Harbor, FL · Apr 10, 2009#19Did you take the time to read my first post in this thread?
HerbicidalRoseville, CA - USA. · May 2, 2009#20Loren - thank you for the write up. I'm interested in a set and now I'm researching the best place to buy from. Besides that, what would you recommend for the rest of the exhaust system? Is it even worth replacing the rest? I'm looking for more torque and hp, but not at the expense of increased noise or decrease in fuel economy.
Thanks for your opinion. 👍
gmodderTexas · May 3, 2009#21Where can i get one of these in the US..
LorenThread starterSafety Harbor, FL · May 3, 2009#22I'm still running the stock exhaust because I don't think there's much torque to gain and it's not worth it to me to put up with all the rattles and squeaks and exhaust noise of a custom exhaust, or the poor quality of a typical cheap aftermarket exhaust. When I'm at the track, I sometimes wish the car was louder, but I've gotten used to it. Any other time, I like it being quiet.
Now, don't get me wrong, there may not be much low-mid range torque to gain, but there probably is some high-end HP to gain by opening the exhaust up. Maybe as much as another 3-5 HP. It's all in how badly you want it.
Gmodder, try Google.
cali yarisCanoga Park, CA · May 3, 2009#23 it's not worth it to me to put up with all the rattles and squeaks and exhaust noise of a custom exhaust, or the poor quality of a typical cheap aftermarket exhaust.
Exhaust note ok, but the exhausts I sell do not rattle or squeak and they are not of poor quality.
Meanwhile... DC Sports was acquired by another company and there are no Yaris headers in production at this time. IF you can find a company with one in stock, you'll be very lucky indeed.
Summit Racing confirmed that they are "special order", and that they have no idea when that means they might be able to get one, if ever.
HerbicidalRoseville, CA - USA. · May 3, 2009#24Cali Yaris - of the header(s) you sell, which would be comparable to the DC Sport version? For my situation I would prefer one that helps with low end torque. I do not take my car on the track.
Honestly I have not spent the time reviewing hp and torque dyno sheets from the various companies. Fit and finish is important as well. Thanks!
gmodderTexas · May 3, 2009#25 Originally Posted by
cali yaris ↑ Exhaust note ok, but the exhausts I sell do not rattle or squeak and they are not of poor quality.
Meanwhile... DC Sports was acquired by another company and there are no Yaris headers in production at this time. IF you can find a company with one in stock, you'll be very lucky indeed.
Summit Racing confirmed that they are "special order", and that they have no idea when that means they might be able to get one, if ever.
So which one that you have for sale do you recommend...Only running the Tanabe Medallion everything else is stock. Except for the AFE
cali yarisCanoga Park, CA · May 3, 2009#26I ran the Tanabe Medalion you have also, I really liked that exhaust. I used the Megan Racing header, worked great. Never heard of one cracking or failing. As for fit and finish, it's a nice piece. It's also back there behind the motor where no one can appreciate it. 🙂
Opening up the exhaust with a header and such will net you a few horsepower - I honestly think there is very little difference from brand to brand on our little motor.
severous01SE Texas · May 3, 2009#27i agree....theres not much to work with here. pipe sizes will all b relatively the same, and if you want a stock replacement then you definitely should be more concerned with quality than performance...
performance wise....about the only thing you can do is a custom long tube header. move the cat back, extend the wire harness, heat shield the cat and go a complete custom exhaust from there.
it's not like a v-8 car where you have shorties, mids, longtubes, cut-outs, e-cut-outs or whatever else is out there. u got one option, and thats' short for now.
PHXDEMONPhoenix, AZ · May 3, 2009#28Somewhat OT, but I have heard from a few people that headers can make your exhaust note cound like crap. Has anyone installed a header and noticed their exhaust sounding much more "ricey" ?
KioshiFremont, CA · May 18, 2009#29 Originally Posted by
cali yaris ↑ Meanwhile... DC Sports was acquired by another company and there are no Yaris headers in production at this time. IF you can find a company with one in stock, you'll be very lucky indeed.
Summit Racing confirmed that they are "special order", and that they have no idea when that means they might be able to get one, if ever.
I just wanted to throw this out there, ebay motors is selling the DC header for our Vitz....pricey but enough in stock. I just cant see myself paying $270+ shipping on it at the moment... I really really want one though~
regalPA · May 25, 2009#30 Originally Posted by
cali yaris ↑ The stock header also pinches the tubes right before the collector -- totally restrictive.
I made 15 whp increase (on the dyno) from intake, header, pulleys and axle-back exhaust. Peterpoop, I think you are incorrect that the header didn't account for any of that gain.
what intake?
NonStopTuningUSA · Aug 11, 2009#31For anyone who may be looking for this header... You may want to look here...
Link to a thread or page that is not in the archive
Picture not included in this copy
cali yarisCanoga Park, CA · Aug 11, 2009#32or here, for $269 shipped and in stock:
http://www.shop.microimageonline.com...1&categoryId=9 I just cant see myself paying $270+ shipping on it at the moment... I really really want one though~
Agreed. There is nothing magical about the DC sports header, the Megan Racing is every bit as good for nearly $100 less. And that's coming from a vendor that carries both. 👍
NonStopTuningUSA · Aug 11, 2009#33Yaris owners now have TWO awesome vendors from which to purchase the DC header!!!
NST + MI = FTW 👍👍
DerFlosserUSA · Aug 11, 2009#34how difficult is the installation?
cali yarisCanoga Park, CA · Aug 11, 2009#35It's not difficult and uses regular tools. Reaching behind the motor to get at the bolts is a little tedious but doable. Better if you can get up in there from underneath as well (for the two bolts that connect to the midpipe.
GalavoxxSan Francisco · Aug 11, 2009#36Got Mine. Can't wait to install. Hopefully this adds a little juice!!
HerbicidalRoseville, CA - USA. · Aug 12, 2009#37I see that the Megan header comes with a new gasket (at least it's in the picture), does the DC?
cali yarisCanoga Park, CA · Aug 12, 2009#38The DC does not come with a gasket, but the Megan does!
kngrsllSpartanburg, SC · Aug 12, 2009#39you can reuse the gasket just fine.
HerbicidalRoseville, CA - USA. · Aug 12, 2009#40 Originally Posted by
cali yaris ↑ The DC does not come with a gasket, but the Megan does!
OK, so the DC header has free shipping (plus I would need to buy a gasket), the Megan does not have free shipping, so shipping and sales tax (uggh!) in CA. to 95747 for the Megan would be how much? Still trying to decide... 🤷
This may be an early b-day present to myself. 😁
Thanks!
kngrsllSpartanburg, SC · Aug 12, 2009#41 Originally Posted by
Herbicidal ↑ OK, so the DC header has free shipping (plus I would need to buy a gasket), the Megan does not have free shipping, so shipping and sales tax (uggh!) in CA. to 95747 for the Megan would be how much? Still trying to decide... 🤷
This may be an early b-day present to myself. 😁
Thanks!
dc, hands down...
HerbicidalRoseville, CA - USA. · Aug 12, 2009#42 Originally Posted by
kngrsll ↑ dc, hands down...
Got your vote marked in the DC column. 👍
cali yarisCanoga Park, CA · Aug 12, 2009#43 the Megan does not have free shipping
sure it does!
HerbicidalRoseville, CA - USA. · Aug 12, 2009#44 Originally Posted by
cali yaris ↑ sure it does!
Just look'n at your web site my brutha! Other items say "Free shipping" or "Free shipping on this item!", just not for the Megan header. 😉
bikegermNashville, TN. · Aug 12, 2009#45So do we or don't we need to purchase another exhaust gasket from toyota when we install the DC?
HerbicidalRoseville, CA - USA. · Aug 12, 2009#46I suspect that would be the correct course of action. The mating surfaces may be slightly different and it's probably cheap insurance against leaks.
cali yarisCanoga Park, CA · Aug 12, 2009#47 Just look'n at your web site my brutha! Other items say "Free shipping" or "Free shipping on this item!", just not for the Megan header.
Well... if you bought it, you'd see there was free shipping on that too. 😉
but I do thank you for the catch, I've added the extra text now!
cali yarisCanoga Park, CA · Aug 12, 2009#48I personally would never re-use a header gasket, but that's just me.
Keith TinariHolland PA. · Aug 12, 2009#49 Originally Posted by
PHXDEMON ↑ Somewhat OT, but I have heard from a few people that headers can make your exhaust note cound like crap. Has anyone installed a header and noticed their exhaust sounding much more "ricey" ?
header design (UEL, EL) can change the tone an exhaust has, but in this case the only thing that would really change the sound of this car is overall pipe diameter and status of the catalytic converters. When the pipe diameters dont all match up together and bottle neck you get that ricey farting with helium in your butt sound, when you lose your cats you get a raspy tone and that sounds worse when you couple it with a exhaust with uneven pipe diameters. You should try and stick to the same diameter piping as much as possible to maintain a smoother flow.
NonStopTuningUSA · Aug 12, 2009#50Talk about a thread revival!