Yarisworld Archive

Australian yaris mods!!

288 posts · 256,791 views · page 4 of 6

Replies continued

lunjiaowPerth, Australia. · Sep 16, 2009#151
Yeah the taillights look lighter then the ebay pics. Hopefully its straight plug and play.
1NZYaris1New Zealand · Sep 16, 2009#152
Just a quick heads up for those running , or want to run LED
indicators , instead of using Load resistors you can now buy this
just remove the old relay and plug the new one in .👍

2 attachments not included in this copy

ruimondPerth, Australia · Sep 16, 2009#153
Originally Posted by 1NZYaris1 ↑
Just a quick heads up for those running , or want to run LED
indicators , instead of using Load resistors you can now buy this
just remove the old relay and plug the new one in .👍
How does that change the indicator to LED? Wouldn't it be LED bulbs already in it? lol.
ruimondPerth, Australia · Sep 16, 2009#154
Looks like its not just plug in and turn on. I was looking at the DIY and the connectors are more horizontally shaped. Not sure how they are on the Australian ones.

The shape of the one on the tails is kinda more square.

Picture not included in this copy

Might need to get new connectors hey vince. lol.
lunjiaowPerth, Australia. · Sep 17, 2009#155
Its supposed to slow down the flash rate of your indicators once you replace LEDs globes with bulbs.

Thats no good, more modification with wiring harness. how fun. Would be swell if it was just plug and play. Will probably have to go to toyota to get the right plugs if they dont fit correctly.

Anyway i just found the plug for yaris tail light. Is the aftermarket tail light plug like that?

1 attachment not included in this copy

ruimondPerth, Australia · Sep 17, 2009#156
Originally Posted by lunjiaow ↑
Anyway i just found the plug for yaris tail light. Is the aftermarket tail light plug like that?
I can't remember exactly actually. lol. Might have a look later. I kinda already repacked it. Haha.
AND189australia · Sep 18, 2009#157
lunjiaow
You would need wider wheels for more traction so you can turn corners faster. Also good tyres will help too. I havent done any performance mods on my car as i have the 2NZ so i dont think its worth doing up. Just doing suspension mods so i can chuck the car around.
ok well i find that when i went to the wider tyres from stock , in the wet i had to slow down a lot or the car just slides of the road... so i should go to 15"/7" from what i have now 15"5.5" ?? i also have the 2nz and doing the same i have the TRD shocks & springs strut brace and sway bar & short shift what eals can i do
lunjiaowPerth, Australia. · Sep 18, 2009#158
You are probably going too fast on that corner, or you are running low cost tyres. I would go 15x7 if possible but most rims you see are around 6 or 6.5. I have 17x7s and 16x7s. Seem to grip quite well. I dont speed around corners in the wet =P

Sounds like a great suspension combination you are getting. Im sure that's enough to have lots of fun.
You could get a Cold Air Intake and even an exhaust system to make the car sound nice.
1NZYaris1New Zealand · Sep 18, 2009#159
Originally Posted by AND189 ↑
lunjiaow

ok well i find that when i went to the wider tyres from stock , in the wet i had to slow down a lot or the car just slides of the road... so i should go to 15"/7" from what i have now 15"5.5" ?? i also have the 2nz and doing the same i have the TRD shocks & springs strut brace and sway bar & short shift what eals can i do
You dont say what tyres your running , but i have the same setup almost .
My alloy's are 15x6.5x44et with 12mm rear spacers , with 185x55x15 tyres
great in most conditions except snow ,lol, tyre compund and pressure could
be your problem as well as fitment on the 5.5 rims deforming sidewall too much .
ruimondPerth, Australia · Sep 19, 2009#160
Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Some photos i took after install today. Took like 2hours or so. Thanks to my friend for the assistance and help. Did most of it myself with his instructions, was kinda scared to. lol

Left headlight clip needed some heatgun action, as it didn't fit as well as the right side. But all good now. 👍
elijahsamiAustralia · Sep 19, 2009#161
Thats one hot🤘 yaris you got there mate.......🙇
ruimondPerth, Australia · Sep 19, 2009#162
Originally Posted by elijahsami ↑
Thats one hot🤘 yaris you got there mate.......🙇
Thanks alot. 👍
1NZYaris1New Zealand · Sep 19, 2009#163
Your getting quite good at photo shop aren't you 😆 J/K
Looks real good ruimond , congrate's mate . 👍
ruimondPerth, Australia · Sep 19, 2009#164
Originally Posted by 1NZYaris1 ↑
Your getting quite good at photo shop aren't you 😆 J/K
Looks real good ruimond , congrate's mate . 👍
Haha as if Ray, its real! Yeah i know lol.

Thanks mate. Soon to do a photoshoot when its not raining. They look like they fit pefectly on the photos. But its off in some parts, just a tad here and there. Prob just me being to particular of it being perfect. LOL. 😁
JahbsPerth · Sep 19, 2009#165
how much are RS side skirts
ruimondPerth, Australia · Sep 19, 2009#166
Originally Posted by Jahbs ↑
how much are RS side skirts
i got mine from thailand. they aren't perfect, as their replica's. around $400+ i paid with my spoiler. not sure how much by itself. then u have to pay abit of import tax and collect it from the airport. 😆
djgab101Thread starteraustralia · Sep 19, 2009#167
looks amazing!!
AND189australia · Sep 20, 2009#168
thanks "lunjiaow) (1NZYaris1"
for the tips your i dont speed in the wet at all i do enjoy a bit of speed on corners because the car grips so well and yes the tyres i have are go fast 3000 (CRAP) so i think i should go get some good ones, 1NZYaris1 you said you have some spacers what is the advantage of them and to they make the wheel stick out the gard at all ???
JahbsPerth · Sep 20, 2009#169
mmm doesn sound too bad hey has anyone had the engine start stop button fitted in their yaris mine doesn have :(
AND189australia · Sep 20, 2009#170
Jahbs
mmm doesn sound too bad hey has anyone had the engine start stop button fitted in their yaris mine doesn have :(
no but i want one they look cool ay

Originally Posted by Jahbs
how much are RS side skirts
i got mine from thailand. they aren't perfect, as their replica's. around $400+ i paid with my spoiler. not sure how much by itself. then u have to pay abit of import tax and collect it from the airport.
mate i am keen for a set who do you get them from ???
1NZYaris1New Zealand · Sep 20, 2009#171
Originally Posted by AND189 ↑
thanks "lunjiaow) (1NZYaris1"
for the tips your i dont speed in the wet at all i do enjoy a bit of speed on corners because the car grips so well and yes the tyres i have are go fast 3000 (CRAP) so i think i should go get some good ones, 1NZYaris1 you said you have some spacers what is the advantage of them and to they make the wheel stick out the gard at all ???
That depends on the offset of your wheels , i have 44mm offset and 12mm
Spacers 👍

2 attachments not included in this copy

AND189australia · Sep 20, 2009#172
ha ha ok lol (Danger) i dont know what my offset is when it comes to handling do you feel any difference ???
spookzSydney, Australia · Sep 20, 2009#173
And this is 1NZYaris' 10mm spacers with 16x7.0 +44 wrapped in 195/50R16. Thanks again Ray! 👍

Picture not included in this copy

Kenneth
1NZYaris1New Zealand · Sep 21, 2009#174
Dam that looks good Kenneth 👍, and dom under is cool 👍
AND189australia · Sep 21, 2009#175
yeh i have 15" not sure if i should jump to 17 or spacers still thinking it looks good though
spookzSydney, Australia · Sep 21, 2009#176
Is there any reason you're not considering 16's? Since you're going down the handling department with your mods.
AND189australia · Sep 22, 2009#177
well i have 15" are you saying 16" are the best ??? i am open to anyones opps
rob323Joyner, Brisbane · Sep 22, 2009#178
Best at what?
For handling and choice of semislicks - 14's or 15's
For looks - well that's a personal thing.
AND189australia · Sep 22, 2009#179
ok i am looking for the best handling so stay with 15"
spookzSydney, Australia · Sep 23, 2009#180
Nah, I was just asking why not 16's because you asked whether you should jump up to 17's.
AND189australia · Sep 23, 2009#181
i never considered them i guess ha ha
kiwiAustralia · Sep 24, 2009#182
Just joined YARIS WORLD, some of you know me from TOCAU.
Anyway here are a few pic's.

3 attachments not included in this copy

ruimondPerth, Australia · Sep 24, 2009#183
Finally joined! First post. 👍 Haha you actually bought a spare. I didn't on mine. Still waiting for your items i see. The forum is bad makes you want to buy things. LOL.😆
kiwiAustralia · Sep 24, 2009#184
Originally Posted by ruimond ↑
Finally joined! First post. 👍 Haha you actually bought a spare. I didn't on mine. Still waiting for your items i see. The forum is bad makes you want to buy things. LOL.😆
Thanks ruimond, got a spare (5th) wheel so i could sell the YRX wheels as a set of five and yes i'm still waiting.
33lamBrisbane · Oct 2, 2009#185
that is my yaris with new rims!~

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy
elijahsamiAustralia · Oct 2, 2009#186
Nice ride mate.....can imagine the look on swift and jazz drivers lol👏
Great job good on ya
ruimondPerth, Australia · Oct 2, 2009#187
The white rims goes well with your car. Much better then your old rims 33lam.
lunjiaowPerth, Australia. · Oct 28, 2009#188
Took these pics a while ago. Just haven't posted up here yet i dont think.

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy
1NZYaris1New Zealand · Oct 28, 2009#189
that is looking pretty hot , those green wheels are growing on me 😁
SpeedzBrisbane, Australia · Nov 3, 2009#190
Originally Posted by 33lam ↑
that is my yaris with new rims!~

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy
nice we got the same rims except mine is black...
1NZYaris1New Zealand · Nov 4, 2009#191
Hey Vincent i keep for getting to ask you , did you have any problems or
issues in fitting the RS badge to the grill.
might get one for mine 👍
FABGermany · Nov 4, 2009#192
very nice rides :)
hasher22Australia Sydney · Nov 4, 2009#193
eh might as well put mine in. Havnt been here in a long time..

Picture not included in this copy
1NZYaris1New Zealand · Nov 4, 2009#194
You could of atleast washed it first 😆 😆 👍
hasher22Australia Sydney · Nov 4, 2009#195
lol havnt washed my car in like 8 months....cant be bothered lol...
spookzSydney, Australia · Nov 5, 2009#196
Hasher22, I saw you on Centenary Drive earlier this afternoon! Looking awesome! :)
lunjiaowPerth, Australia. · Nov 5, 2009#197
Originally Posted by 1NZYaris1 ↑
Hey Vincent i keep for getting to ask you , did you have any problems or
issues in fitting the RS badge to the grill.
might get one for mine 👍
Haha. Yeah i had problems fitting it. I think it was meant for the stock grille. So i ended up cutting most the tabs and left two only and cabled tied it to the mesh. Its been on ever since, been thru the car wash with no problems.
lunjiaowPerth, Australia. · Nov 5, 2009#198
Originally Posted by hasher22 ↑
eh might as well put mine in. Havnt been here in a long time..

Picture not included in this copy
your car is looking great! keep up the good work.
hasher22Australia Sydney · Nov 5, 2009#199
Originally Posted by spookz ↑
Hasher22, I saw you on Centenary Drive earlier this afternoon! Looking awesome! :)
plz stop stalking me......acually i want a stalker, i like
spookzSydney, Australia · Nov 6, 2009#200
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy

:D