Yarisworld Archive

Australian yaris mods!!

288 posts · 256,791 views · page 6 of 6

Replies continued

1NZYaris1New Zealand · Sep 2, 2010#251
Originally Posted by lunjiaow ↑
Very tempting. Would be great if it was plug and play.
It will be Plug and play , as i will be adding the plugs 👍
lunjiaowPerth, Australia. · Sep 3, 2010#252
Ahhh nice. Well let me know how you go with it. Im interested but not keen on splicing my wiring harness.
lunjiaowPerth, Australia. · Sep 3, 2010#253
Ahhh nice. Well let me know how you go with it. Im interested but not keen on splicing my wiring harness.
1NZYaris1New Zealand · Sep 4, 2010#254
Originally Posted by lunjiaow ↑
Ahhh nice. Well let me know how you go with it. Im interested but not keen on splicing my wiring harness.
i will probably put this on hold due to current conditions here in Christchurch , just to play it safe .
RevssonSoutheast Wisconsin · Sep 4, 2010#255
I heard about the earthquake over there. Hope you are doing well despite that.
1NZYaris1New Zealand · Sep 4, 2010#256
Originally Posted by Revsson ↑
I heard about the earthquake over there. Hope you are doing well despite that.
Yeah we where and are very lucky , minor damage to our house
but some of the neighbors where not so lucky .
its nice to have power and phone again
water is still an issue .👍
lunjiaowPerth, Australia. · Sep 5, 2010#257
glad you are fine Ray. Minor damage is only cause you have a yaris. =)
Hope everything goes well with you.
hazzySydney, Australia · Sep 24, 2010#258
Testing:
Picture not included in this copy
lunjiaowPerth, Australia. · Sep 26, 2010#259
Retrofit Projectors and Black Out Headlights.
Picture not included in this copy



Black Vinyl Roof
Picture not included in this copy
defectamelbourne, straya · Oct 1, 2010#260
has anyone here bought the Mars Performance Angel Eyes headlights for the Yaris?
http://www.marsperformance.com/html/...ris-05-09.html

Im a bit of a noob and doing a bit of research into headlights etc, it seems there is a lot I had no idea about. Like ballasts, HIDs and projectors etc.

Im curious if anyone can offer any experience in fitting the Mars headlights, as I am not sure about how to hook up the Halos. Is it as simple as splicing them into the parkers wiring? Is it more complicated that that because they are LEDs?

(apologies if I have posted in the wrong section, it seemed appropriate. And I'm new here. 😳 )
ZippiePerth Western Australia · Oct 3, 2010#261
Originally Posted by AND189 ↑
yeh i have 15" not sure if i should jump to 17 or spacers still thinking it looks good though
I have 17 inch custom chrome rims it handles fine, will post up pics when I take some pics in the morning
ZippiePerth Western Australia · Oct 3, 2010#262
Originally Posted by ruimond ↑
Thanks 👍

Im not sure how much it cost to do, when i bought my yaris in stock form it came with them from the dealer. But im guessing at least $100-200+ professionally done. I could be wrong though.
ruimond

my white 5 door yaris is getting the stripes also! I have a freind who makes up stickers for motorcycles, he is making mine up.

ATM I am having side mirrors with indicators installed, rear scoop, lights (not sure which as yet) and fog lights
ruimondPerth, Australia · Oct 3, 2010#263
Originally Posted by Zippie ↑
ruimond

my white 5 door yaris is getting the stripes also! I have a freind who makes up stickers for motorcycles, he is making mine up.

ATM I am having side mirrors with indicators installed, rear scoop, lights (not sure which as yet) and fog lights
Cool, gl with that.

Mine might be coming off soon, as im thinking of selling my car. Haha.

I have parts in the other thread you may be interested in. Cheers.
1NZYaris1New Zealand · Oct 3, 2010#264
Originally Posted by ruimond ↑
Cool, gl with that.

Mine might be coming off soon, as im thinking of selling my car. Haha.

I have parts in the other thread you may be interested in. Cheers.
What other thread🤷
NinjaPiratePerth, .au · Oct 3, 2010#265
Originally Posted by 1NZYaris1 ↑
What other thread🤷
right below this one 😛 Part Out EOI
ZippiePerth Western Australia · Oct 12, 2010#266
here is a pic of the rims I have fitted to my 2010 5 door hatch, custon paint job gets done in the Christmas /New Year break while I am not at work, hopefully all the new parts will have arrived by then.


The rims are from tech9tyres down Fremantle way, I have to get speedo recalibrated because its approx 3-5km out now

Spacers were fitted and custom drilling had to be done but love them, when they are polished they look great

1 attachment not included in this copy

jasyboygeelong victoria · Dec 14, 2010#267
where abouts can i get after market halo headlights and a set of rear taillights to match , please help i live in geelong victoria
imachopyoheadoffSydney, Australia · Aug 26, 2014#268
Originally Posted by opalbrown ↑
Picture not included in this copy

this is my 2011 yaris 3 door hatch, stock at the moment but will be doing mods asap such as tint, lower, sound system, vinyl wrap, lighting, exhaust tip.. I am debating on a turbo though; if anyone hadls made that mod id like to hear from you :)
Hey! Whereabouts are you from? That's clean! Cant wait to see what you do to it! :)

anyways here's mine
current mods are.
Ultra Racing 19mm rear sway bar
Cusco Front Strut Brace
Cold Air Intake (routed to left foglight hole for moar air hahah)
16x8 BBS Replicas
6.5" sony speakers all around, kenwood headunit, 600w fusion sub
Picture not included in this copy
imachopyoheadoffSydney, Australia · Nov 24, 2014#269
I'm from Sydney :)
Got rid of the rims since then. here's how the car looks like now haha
Hope you find a set of wheels you like! :D and I'm planning of turboing my car too. Just need more funds ahah.
keep us posted on what you'd be doing to your car! :D

Picture not included in this copy
LeprKoRnSydney, Australia · Dec 8, 2016#270
Has this feed died?
LeprKoRnSydney, Australia · Dec 9, 2016#271
Oh well, will post anyway.

No mods yet, but we shall see what happens.

2012 Yaris YRS 👍

Picture not included in this copy

Sent from my SM-G920I using Tapatalk
williew2Australia · Feb 1, 2017#272
Originally Posted by LeprKoRn ↑
Oh well, will post anyway.

No mods yet, but we shall see what happens.

2012 Yaris YRS ��
had to create a new account to post, guess cos I've not been back for a while :/ but anyway I've got a 2013 YR but with a few additions, cruise control that I picked up thanks to a member here, 15" wheels, fog lights etc, got a cat back custom exhaust fitted recently and sound good, soon to fit some pedders sports riders to lower it a tad :)

I am trying to source a set of headers that will fit the 1.3lt 2NZ-FE engine with not much luck as well as a reasonable cold air kit. Any leads for suppliers in Australia would be great.
LeprKoRnSydney, Australia · Feb 5, 2017#273
Hey willie, nice to hear from another Aussie 👍 who did your exhaust system? Not sure if there are many oz suppliers for Yaris stuff.... may have to look in Japan or the US, although postage may be costly.

Some pics once the pedders are fitted would be awesome!

Cheers
Lep

Sent from my SM-G920I using Tapatalk
williew2Australia · Feb 6, 2017#274
Originally Posted by LeprKoRn ↑
Hey willie, nice to hear from another Aussie 👍 who did your exhaust system? Not sure if there are many oz suppliers for Yaris stuff.... may have to look in Japan or the US, although postage may be costly.

Some pics once the pedders are fitted would be awesome!

Cheers
Lep

Sent from my SM-G920I using Tapatalk
Exhaust was done by a local shop, took a few goes though, first was front resonator delete to a straight pipe, it was obnoxious 😈 then tried a small muffler and it was to quite 🤷 ended up with a "baffled" SS resonator at the rear a mild steel in the middle, I'm not totally happy but it's pretty close and given I'm putting headers (got a lead on some) on it will change again, but it has mellowed with use 😉

Kinda funny a 43yr old souping up a little 1.3ltr roller-skate but it's a fun little rocket
LeprKoRnSydney, Australia · Feb 6, 2017#275
Nothing wrong with any age souping up any car 👍 mine is the 1.5lt, but I've been told by the minister for war and finance (the missus) that the budget is fish bum tight.... we shall see haha

Sent from my SM-G920I using Tapatalk
miisergreece · Feb 6, 2017#276
Hi all,
I am not from Australia but I will post anyway :p
This is my 2009 5 door yaris. 1.33L 100hp 6speed manual. I think it has the terra package but I am not sure.

It's 100% stock right now. I am the only owner I bought it brand new. Current miles: 105.500. Zero problems whatsoever. I am really taking care of it. Imagine, I haven't even changed clutch, or suspension, or disk brakes so far. They are in good condition even after so many miles.
As you see in the pictures, my first mod will be these jvc cs-620x speakers. I am going to fit them in the weekend. Time to upgrade the poor sound quality of the stock speakers. Also I am planning to do some soundproof in the front doors with glass wool, if I am calling it right to boost even more the new speakers. It's way more cheaper than dynamat products. Not that effective tho, but it's better than nothing.

Plannings in the near feature:
•Chrome rings on the circle air vents.
•Exhaust tip
•maybe a new leather gear knob cause mine has damages
•interior led lights
•black vvti tags near the fender's turn signals

Plannings in the far feature:
•Rear spoiler
•soundproof in the rear doors
•amplifier to boost my rms output (I might do this in near feature. It depends from the sound quality I will have from the new speakers Picture not included in this copy)
•windows tint
•paint calipers red and put TRD sticker on them

Wish list (no money no honey):
•turbo kit Picture not included in this copyPicture not included in this copyPicture not included in this copy
•aftermarket pioneer headunit

Zero knowledge of how to do it:
•floor mat led lights
•interior lights dimming. (So they close slowly)
•front console tint with some brushed aluminum or 4D carbon fiber vinyl.
•Day-led-lights


Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy


Sent from my iPhone using Tapatalk
LeprKoRnSydney, Australia · Feb 13, 2017#277
Hi Miiser, very nice! Love the ideas, good luck with it 👍

Hey Willie, have you fitted the sports riders yet? Whereabouts in Aus are you hiding? 👍


Sent from my SM-G920I using Tapatalk
williew2Australia · Feb 14, 2017#278
Originally Posted by LeprKoRn ↑
Hey Willie, have you fitted the sports riders yet? Whereabouts in Aus are you hiding? ��


Sent from my SM-G920I using Tapatalk
Not yet, finishing of the exhaust side first, I'm waiting on a set of headers from the states 👍 I hope they will fit 😉

Then it will be onto the suspension, haven't bought them yet as I'm hunting around the net for other (cheaper) options, but if I don't find anything it will be pedders, actually looking at king springs now as I've used them on previous vehicles and they've popped up in my searches as suitable.

This is it at the moment, just a daily driver, dirt, bugs and all 🙂

1 attachment not included in this copy

justanotherdrunkSilicon Valley · Feb 15, 2017#279
nice wheels
LeprKoRnSydney, Australia · Feb 15, 2017#280
Originally Posted by williew2 ↑
Not yet, finishing of the exhaust side first, I'm waiting on a set of headers from the states Picture not included in this copy I hope they will fit 😉

Then it will be onto the suspension, haven't bought them yet as I'm hunting around the net for other (cheaper) options, but if I don't find anything it will be pedders, actually looking at king springs now as I've used them on previous vehicles and they've popped up in my searches as suitable.

This is it at the moment, just a daily driver, dirt, bugs and all Picture not included in this copy
Good luck with the exhaustPicture not included in this copy the only mod I've done is 4 new tyres to pass rego haha meeting resistance for the missus to clear funds atm.... Picture not included in this copy

Sent from my SM-G920I using Tapatalk
LeprKoRnSydney, Australia · Feb 15, 2017#281
How hard do you reckon it was to fit the driving lights?

Sent from my SM-G920I using Tapatalk
williew2Australia · Feb 16, 2017#282
Originally Posted by LeprKoRn ↑
Good luck with the exhaustPicture not included in this copy meeting resistance for the missus to clear funds atm.... Picture not included in this copy

Sent from my SM-G920I using Tapatalk
so was I, then I just did it and now I can't keep her out of it

Originally Posted by LeprKoRn ↑
How hard do you reckon it was to fit the driving lights?

Sent from my SM-G920I using Tapatalk
They are "fog lights" but they are plug and play, I got mine from Ebay, all the wiring is there ready to go except the stalk switch, just need a button that fits in a blank near the mirror adjustment, same as the cruise control. pretty sure the instruction are on here somewhere as well.
LeprKoRnSydney, Australia · Feb 16, 2017#283
Originally Posted by williew2 ↑
so was I, then I just did it and now I can't keep her out of it



They are "fog lights" but they are plug and play, I got mine from Ebay, all the wiring is there ready to go except the stalk switch, just need a button that fits in a blank near the mirror adjustment, same as the cruise control. pretty sure the instruction are on here somewhere as well.
Thanks mate! Will look on feebay and see what i can find! Did you search yaris or vitz? Does it really matter haha....

Sent from my SM-G920I using Tapatalk
williew2Australia · Apr 14, 2017#284
finally got around to fitting my springs and headers.

Springs dropped ride by 30mm and handles a little better, still stock shocks though.

Headers were fun to fit and aren't quite right, geometry was a little off (about 5mm if that) and they rattle on the x-member under forward acceleration, and I need to drill na extra hole in the engine mount bracket on the header, everything else fit striaght up, going to need an exhaust guy to help me fix bumping on the cross member though, maybe just replace the lot from the headers back and be done with it, otherwise a noticeable improvement over stock manifold.

3 attachments not included in this copy

williew2Australia · Nov 11, 2017#285
Just incase any from Oz stops by here, I now have a Tanabe axle back sport exhaust fitted, replaced the above headers with Megan Racing headers, both sourced from Redline360 in the US and sent over via USPS at a reasonable price, and have this nice little addition recently fitted.

1 attachment not included in this copy

beakeyozzBrisbane · Oct 19, 2018#286
where did you get cold airtake from same place
Prtyboy73Adelaide, South Australia · Dec 1, 2022#287
Picture not included in this copy

1 attachment not included in this copy

CompeerAuckland, NZ · Dec 10, 2022#288
Originally Posted by Prtyboy73 ↑
Attachment 62396
Looks good with the kit in blue 🤘