Yarisworld Archive

Australian yaris mods!!

288 posts · 256,791 views · page 3 of 6

Replies continued

jinxorSydney, Australia · Feb 15, 2009#101
katsu.. your yaris is looooowwww!!!!
katsudonAustralia, Melbourne · Feb 15, 2009#102
dumpage ftw!
katsudonAustralia, Melbourne · Feb 15, 2009#103
the owner of motorware is stupidly kissing the ground, compare to mine

1 attachment not included in this copy

d4rkspawnMelbourne · Feb 16, 2009#104
i bought them from one of the guy on this forum... from US...
i think gramz?? can't remember though...

and yes i'm happy with the drop.. i don't want to do it too deep.. i used to have civic with super low suspension... looks fantastic but troublesome a lot and spring rate hard like stone... lol...
d4rkspawnMelbourne · Feb 16, 2009#105
Originally Posted by katsudon ↑
d4rkspawn nice looking yaris mate.

lowered my yaris a bit more over the weekend with some mates at motorware in clayton.

will take proper pictures when i get the time.
your one looking nice too...
glad to see there are still few modified yaris in melbourne...
i don't see much modified yaris in melbourne .. so far I only saw 2 modified black yaris....

i am planning to put bodykit on it.. but could not find a reasonable cheap price in Australia... 👎
ruimondPerth, Australia · Feb 16, 2009#106
Looks good d4rkspawn. Welcome to yarisworld. :D

The drop on coilovers are so nice :P Looking good as well katsudon.
katsudonAustralia, Melbourne · Feb 26, 2009#107
finally did some photoshooting today. yay!

Picture not included in this copy

more on the photo thread
harveyjaiSydney, Australia · Feb 27, 2009#108
looking good mate!
spookzSydney, Australia · Feb 27, 2009#109
I'm pretty sure I spotted you Harveyjai one afternoon on that road just off james ruse drive... ahah (I forgot when exactly..) But very nice ride =)
jinxorSydney, Australia · Feb 27, 2009#110
that is looking sweet katsu.... nice
katsudonAustralia, Melbourne · Mar 6, 2009#111
Thanks guys!!
spookzSydney, Australia · Mar 16, 2009#112
Some goods arrived today..
Picture not included in this copy
BIG thanks to Garm @ MicroImage! :P
ruimondPerth, Australia · Mar 19, 2009#113
Yay some springs, i saw your photos on TOCAU. Looks better now. Are those NF's?
spookzSydney, Australia · Mar 19, 2009#114
Sure is. Much, much better! =D
GrayFoxAustralia · Mar 20, 2009#115
Can I ask what it cost to have those shipped over?
lunjiaowPerth, Australia. · Mar 20, 2009#116
Originally Posted by katsudon ↑
finally did some photoshooting today. yay!

Picture not included in this copy

more on the photo thread
Katsudon im just wondering do you know your spring rates for the BC Coilovers and also have you had any problems with them yet? Planning on getting a set maybe next month or so.
katsudonAustralia, Melbourne · Mar 21, 2009#117
Originally Posted by lunjiaow ↑
Katsudon im just wondering do you know your spring rates for the BC Coilovers and also have you had any problems with them yet? Planning on getting a set maybe next month or so.

the fronts are 6kg and the rears are 3kgs. no problems with them at all, only guards rubbing when lowing too much with big wheels.
lunjiaowPerth, Australia. · Sep 3, 2009#118
So anyone done new mods lately? Seems dead here....
ruimondPerth, Australia · Sep 3, 2009#119
Its been dead in the Australian forums for ages lol. What happen to ppl like jinxor and stuff that use to post heaps lol.
elijahsamiAustralia · Sep 4, 2009#120
So true....probably recession holdin us back
1NZYaris1New Zealand · Sep 4, 2009#121
do i count 😛
😆
elijahsamiAustralia · Sep 4, 2009#122
Originally Posted by 1NZYaris1 ↑
do i count 😛
😆
hey bro wish you were my neighbor lol i would have saved heaps on shippin🤤
By the way like the small robot in your emblem and your custom smiley 👏
1NZYaris1New Zealand · Sep 5, 2009#123
Originally Posted by elijahsami ↑
hey bro wish you were my neighbor lol i would have saved heaps on shippin🤤
By the way like the small robot in your emblem and your custom smiley 👏
Yeah i am starting too bring a lot a stuff in , someone has too supply the local market , and as long as i cover my cost's why not .
That little robot is actually a Storm Trooper 😆
as for the smiley i think i have eTiMaGo to thank for that .😁
🍻
ruimondPerth, Australia · Sep 5, 2009#124
Bringing in stuff hey.....:P Haha. What is this "Stuff" you're bringing in...or shall we wait and see. Hehe.
lunjiaowPerth, Australia. · Sep 5, 2009#125
thats good you can supply us with a few things you bring in.
1NZYaris1New Zealand · Sep 5, 2009#126
Tell me what you want and we will see 😁
At the moment
I have one set H/B fog lamps , one H/B sports grill ,
oh and a set of those Projector hid halo's That you have to retro fit
into your own head lights - but these are mine 👍
lunjiaowPerth, Australia. · Sep 5, 2009#127
*cough* Miracle Crossbar *cough* Ruimond needs those fog lights.
Trial fit this seat in. Will need seat brackets as it sits too low..

1 attachment not included in this copy

ruimondPerth, Australia · Sep 5, 2009#128
Nice new seats Vincent. Haha. Is it just gonna be driver side? or will you get one later for passenger side too.
1NZYaris1New Zealand · Sep 5, 2009#129
Originally Posted by lunjiaow ↑
*cough* Miracle Crossbar *cough* Ruimond needs those fog lights.
Trial fit this seat in. Will need seat brackets as it sits too low..
Hey Vincent you want the seat rail too

It is made by Bride

1 attachment not included in this copy

lunjiaowPerth, Australia. · Sep 5, 2009#130
I have a pair of them. But only problem is they dont recline forward much so its hard to get people into the back. So most likely to get the drivers side in only.

Looks like its for the SCP10? Says on the small pic. Assuming it is for the echo and doesnt fit the yaris. One of the bolt holes looks like it goes to the side. Wouldnt mind it if it does fit the yaris. Whats the price on it?
1NZYaris1New Zealand · Sep 6, 2009#131
Originally Posted by lunjiaow ↑
I have a pair of them. But only problem is they dont recline forward much so its hard to get people into the back. So most likely to get the drivers side in only.

Looks like its for the SCP10? Says on the small pic. Assuming it is for the echo and doesnt fit the yaris. One of the bolt holes looks like it goes to the side. Wouldnt mind it if it does fit the yaris. Whats the price on it?
Sent you an email , i am just awaiting confirmation of what car it came out off , all i know at the moment is it was taken out of a vitz fresh from Japan .
ruimondPerth, Australia · Sep 6, 2009#132
Originally Posted by 1NZYaris1 ↑
I have one set H/B fog lamps , one H/B sports grill to give to Ruimond.
For FREE, How nice of your Ray. 😁 LOL Kidding.
1NZYaris1New Zealand · Sep 6, 2009#133
Try $200.00NZ for the Fog Lights Shipped to you . 🙂
as for the grill they are priceless 😁

And Vincent That Bride seat rail is out of a 2004 Vitz /Echo 👍
lunjiaowPerth, Australia. · Sep 9, 2009#134
too bad they dont fit. might look into weapon r brackets. people say they sit up high. but hopefully the seats that i have will make it sit just nice.
elijahsamiAustralia · Sep 9, 2009#135
Has any one in aus has had springs/suspension done locally?
Or is it better to just get one readymade from US?
ruimondPerth, Australia · Sep 9, 2009#136
Originally Posted by elijahsami ↑
Has any one in aus has had springs/suspension done locally?
Or is it better to just get one readymade from US?
Me and Lunjiaow have Pedders Springs, which is local. Though if your looking for a bigger drop something like the Tanabe DF210 lower your car more. As the pedders sit a little high on the rear end.
lunjiaowPerth, Australia. · Sep 9, 2009#137
Ill be getting coilovers soon, i could sell you my ones if you are interested. Rear springs are cut to suite the front in height wise.
KizBrisbane, Australia · Sep 9, 2009#138
Originally Posted by lunjiaow ↑
Ill be getting coilovers soon, i could sell you my ones if you are interested. Rear springs are cut to suite the front in height wise.
Have you got a photo of your current height? I might be interested too...
elijahsamiAustralia · Sep 10, 2009#139
Originally Posted by ruimond ↑
Me and Lunjiaow have Pedders Springs, which is local. Though if your looking for a bigger drop something like the Tanabe DF210 lower your car more. As the pedders sit a little high on the rear end.
Nah mate i dont wanna go too low, just enuf for some 17 inch shoes and some stability around corners.
elijahsamiAustralia · Sep 10, 2009#140
[QUOTE=lunjiaow;382036]Ill be getting coilovers soon, i could sell you my ones if you are interested. Rear springs are cut to suite the front in height wise.

If it is better than stock i am very interested.
AND189australia · Sep 13, 2009#141
Picture not included in this copy
Picture not included in this copy
KizBrisbane, Australia · Sep 13, 2009#142
Mmm that's a nice even height, not obviously lowered, but not 4x4 style like it is stock :p.
elijahsamiAustralia · Sep 13, 2009#143
nice.....me likey👍
AND189australia · Sep 13, 2009#144
yeh thanks guys except for the wing most of my mods are performance not a fan of the bling just something clean thanks
lunjiaowPerth, Australia. · Sep 14, 2009#145
Looks clean, what size are those rims and tyres? Would be nicer if the car was lowered some more.
AND189australia · Sep 15, 2009#146
they are 15"195/50 i have the trd struts and springs it is good fun to drive as i said looking for the performance mods thanks mate i thought if i put bigger wheels it may corner faster ??? i dont know
lunjiaowPerth, Australia. · Sep 15, 2009#147
You would need wider wheels for more traction so you can turn corners faster. Also good tyres will help too. I havent done any performance mods on my car as i have the 2NZ so i dont think its worth doing up. Just doing suspension mods so i can chuck the car around.
ruimondPerth, Australia · Sep 16, 2009#148
Got the lights in the courier today finally.

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Kinda suprised the taillights ended up a lighter grey colour. Not as dark as was shown on by the seller.

👍🤤
katsudonAustralia, Melbourne · Sep 16, 2009#149
Originally Posted by ruimond ↑
Got the lights in the courier today finally.

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Kinda suprised the taillights ended up a lighter grey colour. Not as dark as was shown on by the seller.

👍🤤
well hello.... 😉 hahahah
1NZYaris1New Zealand · Sep 16, 2009#150
Dude , they are no good sitting on the box , they
should have been on the car already 😆
but they do look nice 🤤