Yarisworld Archive

DIY: JDM RS Tail Light Installation

76 posts · 70,724 views · page 2 of 2

Replies continued

leasaunceSydney, Australia · Jul 24, 2007#51
THAT IS HOT :D i'm so getting them!
uncleyarisToronto · Jul 24, 2007#52
Violin, these are not the rep's. These are the real ones. Jim has the rep's but can get the real ones too. BTY I really thought about getting the MOD's like you have but went with the red. I think the MOD's are the best one the silver. Now if JC can get me the sport TRD exhaust, hint JC!!
jimcatHong Kong · Jul 24, 2007#53
Originally Posted by uncleyaris ↑
thanks JC 👍
welcome ~~~ welcome ~~~
🎉
ViolinNew Jersey · Jul 25, 2007#54
Ahh.

Nevermind then.
NCP91 RSCanada · Sep 3, 2007#55
Hi Rage 2,

I've got the JDM Taillight as well, however, I cut the wire and soder wire from wire to make it work. Now here's my question, do u notice when u put it in reverse both blinkers goes on dimmly, as well as if u put on your turn signal as you going reverse it blinks super fast (turn signal lights) if not please help, I kinda need wire to wire color coding since I don't have the plugs/pins from car any more. thanks
1NZYaris1New Zealand · Nov 2, 2008#56
bump👍
mrbondIllinois · Nov 16, 2008#57
I was thinking of getting a pair of JDM originals, but I saw the price. Then I saw a pair of replicas on microimage.com for much cheaper. But..... Anyway, I wanted to know if there are real LED's in the tail lights or if they're just regular bulbs? Anyone know?
YAR1SRaleigh, NC · Mar 14, 2009#58
they are leds right?
mrbondIllinois · Mar 14, 2009#59
YAR1S ^ were you thinking of getting those too? Lol, almost four months and no reply @_@

ps i'm a huge fan of toothpastefordinner :D
YAR1SRaleigh, NC · Mar 14, 2009#60
Originally Posted by mrbond ↑
YAR1S ^ were you thinking of getting those too? Lol, almost four months and no reply @_@

ps i'm a huge fan of toothpastefordinner :D
haha yeah I thinking about getting some from MI... I might gut the yaris today and have a look inside.... Im pretty sure it's doo-able.. but cutting important wires makes me nervous, haha.
how about you?

and yeah i like toothpaste for dinner, especially the one in my sig, lol.
mrbondIllinois · Mar 14, 2009#61
For sure I'm going to get them. I decided right now that I don't really care if I get like authentic JDM things. Besides wheels, a front lip, and skirts, I'm more about go, not show. The wiring issue doesn't really phaze me too much. I'll just take my time and be careful ;)

lol, about t.f.d. two of my favorites are the one where a character's like "i just wanted to pet the hipster. he was so soft." and the one where the character had "balls" written on his forehead and he's like "hamster, this is not a fraternity and if I ever wake up with anything written on my head again, you are going back to the pet store" i literally laughed for like ten minutes straight. ahhh.
YAR1SRaleigh, NC · Mar 14, 2009#62
haha I havnt looked at any in a while... I might go do that :p

and yeah I'm probably going to buy them tomorrow.... I have to get a reflative plate frame or reflective plate bolts... dont wanna get in trouble with a ticket... cant afford to pay any more money :p
mrbondIllinois · Mar 14, 2009#63
geez, how anal are the cops in NC?
YAR1SRaleigh, NC · Mar 14, 2009#64
Originally Posted by mrbond ↑
geez, how anal are the cops in NC?
they arnt that bad at all... but I havnt got the money or patience to be dealing with a retarded reflector ticket.
YAR1SRaleigh, NC · Mar 21, 2009#65
whats the purpose of this little plastic piece????
Picture lost · www.virgeweb.com
yarisugiハワイ · Mar 23, 2009#66
^ That plastic piece holds that part of the light housing onto the body of the car since there is no fastener to secure it in that area.

I found a way to salvage the old white clip if you want to reuse it in the future. It takes a little time, but at least you won't have to buy a replacement if you ever want to put back your old lights.
Instead of tearing out the top part to release the connector and wiring (like rage2 did in his photos), look at the opening where the connector is located. You'll be able to see a small clip/notch that's holding the connector. Just insert a small screwdriver, lift up that white clip and slide out connector and wire.
jdmlights01.jpgjdmlights03.jpg
YAR1SRaleigh, NC · Mar 23, 2009#67
I ended up cutting the wires and using 3m quick connects.
they were very easy to use but your way seems better in the long run so you dont run out of wire, especially on the driver's side, LOL
TinyGiantRochester, NH · Jun 26, 2009#68
thanks .. this made my TYC install take less than 5 min :)
ptitpiffuteMontréal · Nov 10, 2009#69
Hi there, is there a way to get the 82824-52050 part, in Japan, I guess.

Do you happen to know where ? :)

Cheers
TatshRichmond, BC · Jan 14, 2010#70
Is Jimcat still around to hook me up with some of these?
1NZYaris1New Zealand · Jan 14, 2010#71
Originally Posted by Tatsh ↑
Is Jimcat still around to hook me up with some of these?
haven't seen or heard from him , Try Garm at Micro Image ,he normally has a set or 2 👍
drunixAstoria, Oregon · Jul 27, 2011#72
I ordered the connectors mentioned in this thread and they were completely wrong for the tail lights ordered from MicroImage. Anyone need some connectors?

I just took the original connectors off the stock lights and put them on the new ones.

There is a little plastic locking bale that needs to be popped out with a screwdriver. Then I used a bobby pin to unlock each pin from the connector. The pins just pop into the connector, you put the locking bale back in, and you are all set!
LuiYoSan Juan · Mar 16, 2017#73
Hello everyone, new here. Sorry to revive such an old topic But I bought some JDM taillights for my 2011 sedan but the connectors are way different, is there like a diy cheat sheet around i could use to connect them? Thanks!
PinchliteBarrie Canada · Oct 10, 2017#74
Originally Posted by uncleyaris ↑
contact jimcat!
Who and he can sell jdm tails?
mr_robotNYC · Dec 26, 2017#75
You can find JDM tails for cheap on Yahoo Auctions Japan. But you have to use a third party logistics company such as Buyee.jp

Just bought JDM tails for $50, used but yes $50 and change for the pair. Shipping was anywhere from $100 - $150. I was in no hurry so I picked the cheapest so out the door was around $150!

Now I'm trying to find the connector but I might just cut and splice the wires.
daddz07california · Mar 2, 2018#76
That's what I like.. so now I can do install my light!!! Yahoo!

Sent from my SM-J727T using Tapatalk