She's a movin'!
Paint Booth for Full Respray
104 posts · 591,793 views · page 2 of 3
Replies continued
oooh yeah! If I fail at painting, I can always rent it out for poker games, I suppose. :)Originally Posted by ern-diz ↑She's a movin'!
😁Originally Posted by 06YarisRS ↑oooh yeah! If I fail at painting, I can always rent it out for poker games, I suppose. :)
Does this mean you are venting the fumes straight to atmosphere outside?
Not ideal, but yes. With an HVLP there is apparently less overspray due to high transfer efficiency and therefore less VOCs emitted. I will likely be putting prefilters on my exhaust fans to catch some of the overspray. All of the products that I will be using fall below the VOC emissions limits for my province. Canada has similar regulations to states like California, for example. I'm in a semi-rural area and there's a good distance between us and our neighbours. There are no kids other than mine in the immediate area and mine will be away at day camps when I do any spraying.Originally Posted by ezhacker1 ↑Does this mean you are venting the fumes straight to atmosphere outside?
Good thing you thought it through, good that you don't live near anyone as well for venting. Our setup was very ghetto and "get it done" style. Even with the tiny air mover the filter was good and clogged, couldn't smell any of clear coat outside of the tent.
I now have a much better air mover and when i paint again, i want to like i said, have the filters surround the blower, (keep particles out of the innards)
I now have a much better air mover and when i paint again, i want to like i said, have the filters surround the blower, (keep particles out of the innards)
2 attachments not included in this copy
Cool! How did your previous paint job turn out?
I did a bit more work on mine today. Basically more sanding, a wash and I removed one door handle. The others will come off tomorrow. I just have to figure out how to open the doors after I remove the handles. Also have to figure out a way to mount my handles to paint them.
I did a bit more work on mine today. Basically more sanding, a wash and I removed one door handle. The others will come off tomorrow. I just have to figure out how to open the doors after I remove the handles. Also have to figure out a way to mount my handles to paint them.
I've basically had to remove all of the spray paint I put on the car and bring it back down to factory paint/primer (in spots).
Taping is a very time-consuming process, especially with all of the door gaskets. I would remove them but they appear to be glued in places. One door handle is off and the others come off later today. It took me a while to figure out how to reattach the door handle and make it work again. There's a little pin that rotates down to open the latch. At least I can open the door easily with the handles off. That was initially a concern.
Mud flaps have yet to come off and I'll probably take the liftgate handle off too. Was hoping not to have to wrestle the liftgate cover off again, but, oh well.
Still lots of sanding to do. Then a thorough clean, degrease and after that, the 2K primer. The urge to start spraying now is strong, but I must exercize patience.
I totally get now why a full repaint can be in excess of $3K - $4K.
Picture not included in this copy
Picture not included in this copy
Taping is a very time-consuming process, especially with all of the door gaskets. I would remove them but they appear to be glued in places. One door handle is off and the others come off later today. It took me a while to figure out how to reattach the door handle and make it work again. There's a little pin that rotates down to open the latch. At least I can open the door easily with the handles off. That was initially a concern.
Mud flaps have yet to come off and I'll probably take the liftgate handle off too. Was hoping not to have to wrestle the liftgate cover off again, but, oh well.
Still lots of sanding to do. Then a thorough clean, degrease and after that, the 2K primer. The urge to start spraying now is strong, but I must exercize patience.
I totally get now why a full repaint can be in excess of $3K - $4K.
Picture not included in this copy
Picture not included in this copy
Tedious. I bet you could have removed head and taillights in almost the same amount of time that it took to mask them.
Sent from my Elite_5_5_Octa using Tapatalk
Sent from my Elite_5_5_Octa using Tapatalk
You are probably correct. Though, I did removed one headlight before to replace a bulb and found it quite involved - unhooking the front bumper. The taillights I've never done before. But, yes, it probably would have been easier, plus facilitated a better quality spray job.Originally Posted by WeeYari ↑Tedious. I bet you could have removed head and taillights in almost the same amount of time that it took to mask them.
Sent from my Elite_5_5_Octa using Tapatalk
Fronts are much easier once you know the secrets. The rear are dead easy.
Sent from my Elite_5_5_Octa using Tapatalk
Sent from my Elite_5_5_Octa using Tapatalk
Great job so far! 👍
Everything I've read says prep work is probably 10x (guestimate) the effort of what you'll put into actually priming and painting, but worth it when you're paint comes out looking great. Nothing shows an amateur (or poor shop) job like paint on trim, seals, windows, etc.. because they did a rush job prepping.
Keep up the great work, can't wait to see the end result!
--Adam
Everything I've read says prep work is probably 10x (guestimate) the effort of what you'll put into actually priming and painting, but worth it when you're paint comes out looking great. Nothing shows an amateur (or poor shop) job like paint on trim, seals, windows, etc.. because they did a rush job prepping.
Keep up the great work, can't wait to see the end result!
--Adam
Ah ha. I am all ears for the secrets. The rear lights involve a bolt/screw behind trap doors in the rear panels, do they not?Originally Posted by WeeYari ↑Fronts are much easier once you know the secrets. The rear are dead easy.
Sent from my Elite_5_5_Octa using Tapatalk
Thanks.
Yes, I've heard too that it's largely in the prep work. One thing I did do was remove the belt moulding - and ruined one in the process. Both front ones were pretty gouged up anyway presumeably by an agressive ice scraper-wielding previous owner. I've ordered a new pair.Originally Posted by atomic_hoji ↑Great job so far! 👍
Everything I've read says prep work is probably 10x (guestimate) the effort of what you'll put into actually priming and painting, but worth it when you're paint comes out looking great. Nothing shows an amateur (or poor shop) job like paint on trim, seals, windows, etc.. because they did a rush job prepping.
Keep up the great work, can't wait to see the end result!
--Adam
I think I'll pop the tail lights off as Wee Yari says they're so easy. If he reveals the secrets about headlight removal, I may do those too. That said, I have them taped pretty well and paint should get in well between the lights and panel edges. Then again, I already have half the interior stripped out of the car anyway.
Thanks!
Well... I really wouldn't say there are any secrets. Just gets easier 2nd + times. Just the 7 push pins and the grip'n'rip on the corners. I still get butterflies every time I yank on it. Swear I'm going to rip the clips to shreds. If you pop the headlights out, you will at least know your not painting over whatever crap may be under the lower edge. Also, you will be able to tuck away the overlap of the fender liner.Originally Posted by 06YarisRS ↑Ah ha. I am all ears for the secrets. The rear lights involve a bolt/screw behind trap doors in the rear panels, do they not?
Thanks.
Correct on rear.
Sent from my Elite_5_5_Octa using Tapatalk
I get it re: worring about damaging the clips. I also worry about flexing my bumper too much with my new lip as it does have some filler on it. So, I think I'll reserve removing the headlights for the necessary bulb replacement at this point. Rear lights, I will have a look at. Cheers.Originally Posted by WeeYari ↑Well... I really wouldn't say there are any secrets. Just gets easier 2nd + times. Just the 7 push pins and the grip'n'rip on the corners. I still get butterflies every time I yank on it. Swear I'm going to rip the clips to shreds. If you pop the headlights out, you will at least know your not painting over whatever crap may be under the lower edge. Also, you will be able to tuck away the overlap of the fender liner.
Correct on rear.
Sent from my Elite_5_5_Octa using Tapatalk
Solid prep work mate. Its hard work but pays off. Puts me off doing my own spray jobs a bit. My own car could really do with having a dozen or so dents filled and a spray job. It would only get run into again though. Picture not included in this copy
Sent from my SM-G930F using Tapatalk
Sent from my SM-G930F using Tapatalk
Thanks! Yeah, it is a lot of work. But, I'm hoping it becomes my new hobby and it's a great learning experience. I imagine I'll be a little wary in parking lots for a while after I paint it. I do have extra paint and supplies, so if I have to repair, that will be a good experience too.Originally Posted by zoidberg444 ↑Solid prep work mate. Its hard work but pays off. Puts me off doing my own spray jobs a bit. My own car could really do with having a dozen or so dents filled and a spray job. It would only get run into again though. Picture not included in this copy
Sent from my SM-G930F using Tapatalk
I picked up my base coat and clear coat yesterday. I saved some money there buying state-side. For a gallon of sprayable urethane (paint and reducer shipped in separate containers but premeasured) and a gallon of clear coat, I'm into about $200.00 USD. I picked up my 2K primer last week.
Hoping to apply the primer (about 3 coats), and block sand on Monday in preparation for spraying on Wednesday. It looks like Wednesday will be the perfect conditions - ~25C and low humidity. I had hoped for a medium reducer for the base coat, but they sent slow as that's all they carry apparently. I'll have to be careful to not get runs/sags but it should level better with slow reducer. The clear coat came with medium reducer.
The lacquer thinner is just for post base coat and clear coat gun cleaning and wipedown before tacking and spraying. I have acetone for the 2K Feather Fill G2 primer gun.
Picture not included in this copy
Hoping to apply the primer (about 3 coats), and block sand on Monday in preparation for spraying on Wednesday. It looks like Wednesday will be the perfect conditions - ~25C and low humidity. I had hoped for a medium reducer for the base coat, but they sent slow as that's all they carry apparently. I'll have to be careful to not get runs/sags but it should level better with slow reducer. The clear coat came with medium reducer.
The lacquer thinner is just for post base coat and clear coat gun cleaning and wipedown before tacking and spraying. I have acetone for the 2K Feather Fill G2 primer gun.
Picture not included in this copy
Desire to know more intensifies
Trust me, that shall be afforded. 😁Originally Posted by Runethecursed ↑Desire to know more intensifies
Here is the first coat of primer, It's still wet so a bit streaky here and there. In about 1/2 hour, I'll be going out to lay on another coat.
I had read complaints about the primer being hard to spray as it's so thick, but it went on nice, though a bit orange peely. There will be much block sanding to do before base coat.
I did not take off the remaining 3 door handles as I thought I'd see how well the gun got in and around. It did well on the primer. Metallic base coat might be another issue. But, I have learned about a control coat just after the last, still wet coat of base. You basically mist the car from further back and the metallics sink into the wet base coat and align properly. This may allow me to paint the car with the handles on.
I am extremely happy with my booth. There was absolutely nothing in the air during spraying. The high transfer rate of the hvlp gun and my serious airflow makes for a good set up.
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
I had read complaints about the primer being hard to spray as it's so thick, but it went on nice, though a bit orange peely. There will be much block sanding to do before base coat.
I did not take off the remaining 3 door handles as I thought I'd see how well the gun got in and around. It did well on the primer. Metallic base coat might be another issue. But, I have learned about a control coat just after the last, still wet coat of base. You basically mist the car from further back and the metallics sink into the wet base coat and align properly. This may allow me to paint the car with the handles on.
I am extremely happy with my booth. There was absolutely nothing in the air during spraying. The high transfer rate of the hvlp gun and my serious airflow makes for a good set up.
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Thought of you and this thread over the weekend because I follow a YouTuber named, Tyler Fialko. He has a few crazy project car builds and I sometimes watch them when in bed and unwinding before falling asleep. He hadn't posted in about a month but before that, he had a few vids up where they were prepping an area of their workshop for painting. More recently, he came back with a couple vids of him painting his 'whorevette' in that area. For all the chatting that's happened about ventilation, take a look at these crazies!
https://youtu.be/oXK1MfkFS0A?t=2m27s
https://youtu.be/oXK1MfkFS0A?t=2m27s
Cool video! I'd think that all that overspray in the air would cause a rough surface on the clear coat as it dries and settles. It'll be interesting to see how well the base coat and clear coat overspray will be evacuated from my booth. There didn't seem to be much overspry from the primer.Originally Posted by ern-diz ↑Thought of you and this thread over the weekend because I follow a YouTuber named, Tyler Fialko. He has a few crazy project car builds and I sometimes watch them when in bed and unwinding before falling asleep. He hadn't posted in about a month but before that, he had a few vids up where they were prepping an area of their workshop for painting. More recently, he came back with a couple vids of him painting his 'whorevette' in that area. For all the chatting that's happened about ventilation, take a look at these crazies!
https://youtu.be/oXK1MfkFS0A?t=2m27s
I'm done all three coats now. Super impressed with the TCP Global 18 mm gun I bought. Put the primer on nice. But like I say, there's gonna be a lot of sanding in my near future. LOL.
👍Originally Posted by 06YarisRS ↑Cool video! I'd think that all that overspray in the air would cause a rough surface on the clear coat as it dries and settles. It'll be interesting to see how well the base coat and clear coat overspray will be evacuated from my booth. There didn't seem to be much overspry from the primer.
I'm done all three coats now. Super impressed with the TCP Global 18 mm gun I bought. Put the primer on nice. But like I say, there's gonna be a lot of sanding in my near future. LOL.
I put 4 coats of the Feather Fill on. Should be lots to block sand and get everything straight.
My plan is to block sand over the next couple days and shoot the base coat and clear coat on Wednesday. Kids will be away and the weather looks great.
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
My plan is to block sand over the next couple days and shoot the base coat and clear coat on Wednesday. Kids will be away and the weather looks great.
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
.... i am half tempted to suggest to see a custom livery on this... but keep up the work! I can dream ...
Haha, believe me I've at least thought of a color change. The only reason I nixed it is because I'd have to paint all the jambs, inner doors, trunk, hood etc etc. Way more than I'd like to get into.Originally Posted by Runethecursed ↑.... i am half tempted to suggest to see a custom livery on this... but keep up the work! I can dream ...
I did see a gorgeous root beer brown metallic the other day. 😁
I have been toying with the idea of a racing stripe, or double stripes. The other pic I found is of a stripe kit available on eBay. It is around $38.00. It's available in a variety of colors including, gloss black and matte black.
As an aside, all of my sanding is done and I'm on schedule to spray my base coat and clear coat tomorrow. Getting neerrrrvous, here. LOL
I think this vinyl kit would look super cool in matte against my Silver Streak Mica! 👍
I thought about taping the car off and spraying the stripe on, but chickened out.
Picture not included in this copy
As an aside, all of my sanding is done and I'm on schedule to spray my base coat and clear coat tomorrow. Getting neerrrrvous, here. LOL
I think this vinyl kit would look super cool in matte against my Silver Streak Mica! 👍
I thought about taping the car off and spraying the stripe on, but chickened out.
Picture not included in this copy
Let me start by saying that this has been an experience that I have enjoyed. I'm not convinced I'll do it again lol. Let me also say that I have an even greater respect for auto body technicians and painters after having gone through this. I watched basically every episode of the Gunman on youtube. This guy really makes it look way too easy.
Basically everythng that could go wrong, did. On the tailgate, the basecoat reacted with something that I'd obviously applied in my earlier repairs and had not removed. It wrinkled up at the two upper corners of the hatch, each about a quarter in size. I have saved enough paint and clear coat to fix this. I'll probably have to repaint the whole tailgate, I'm hoping that the thick clear coat will hold down what caused the wrinkle - that's why I went ahead and cleared. Humidity was very high so I got some clouding in the clear but thankfully it did dissipate. I got some small trash in the clear, but it should sand out. So much for my sealed booth, lol. My sanding of the primer was less that perfect, so there are a few spots that are a slightly different texture. But, the car did reach my intended expectations: it is all one color and it is shiny. 👍
I will definitely be color sanding the clear coat as it's a bit orange peely in places but I did use almost a gallon of clear, so I should have lots to sand. About 3/4 of the way through the clearcoat, my hand inadvertently turned down the regulator pressure. Suddenly the clear started going on super smooth. On my gun about 16 - 17 psi works best. I did get a couple runs, but these are easily sanded out.
I'd call it a 50, maybe 100 foot paint job, lol.
On to the pics:
Basecoat:
Picture not included in this copy
Picture not included in this copy
Clear coat:
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Basically everythng that could go wrong, did. On the tailgate, the basecoat reacted with something that I'd obviously applied in my earlier repairs and had not removed. It wrinkled up at the two upper corners of the hatch, each about a quarter in size. I have saved enough paint and clear coat to fix this. I'll probably have to repaint the whole tailgate, I'm hoping that the thick clear coat will hold down what caused the wrinkle - that's why I went ahead and cleared. Humidity was very high so I got some clouding in the clear but thankfully it did dissipate. I got some small trash in the clear, but it should sand out. So much for my sealed booth, lol. My sanding of the primer was less that perfect, so there are a few spots that are a slightly different texture. But, the car did reach my intended expectations: it is all one color and it is shiny. 👍
I will definitely be color sanding the clear coat as it's a bit orange peely in places but I did use almost a gallon of clear, so I should have lots to sand. About 3/4 of the way through the clearcoat, my hand inadvertently turned down the regulator pressure. Suddenly the clear started going on super smooth. On my gun about 16 - 17 psi works best. I did get a couple runs, but these are easily sanded out.
I'd call it a 50, maybe 100 foot paint job, lol.
On to the pics:
Basecoat:
Picture not included in this copy
Picture not included in this copy
Clear coat:
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
I ordered the two front window belt mouldings as the old ones were in pretty rough shape plus I broke the clip on one before figuring out how to actually remove them. The old (rear) ones cleaned up super nice. I wetsanded them with 600 and then 1500 I had laying around. A little Meguiar's polish and a coat of acrylic and they look almost as good as the new ones. I painted the fog light bezels with adhesion promoter and about 6 coats of satin black, then a few coats of the acrylic sealant.
The badges have had 3M tape applied.
I'll post up some pics of the car after everything is put back on.
I will be repainting the hatch later this summer and possibly the rear passenger door as it has a couple of spots that detract from the overall appearance.
Picture not included in this copy
The badges have had 3M tape applied.
I'll post up some pics of the car after everything is put back on.
I will be repainting the hatch later this summer and possibly the rear passenger door as it has a couple of spots that detract from the overall appearance.
Picture not included in this copy
Damn. That really isn't bad for a DIY spray job.
The Gunman on YouTube makes it look so easy.
The Gunman on YouTube makes it look so easy.
Thanks! I definitely learned a lot. Next time, I'll block sand with guide coat. It was very stupid of me to not do that. I think I would have had a much, much better job had I done that. I basically rushed the job at the end. What I would give to back up 3 days. I have to keep in mind that it is a 12 year old car and it's got other signs of wear and tear. That said, I do feel regretful that I didn't take the time to properly sand.Originally Posted by zoidberg444 ↑Damn. That really isn't bad for a DIY spray job.
The Gunman on YouTube makes it look so easy.
There are some spots where the clear is not as thick as others. It's still a good covering in those spots. But, I would defintely pay closer attention and plan out a strategy. It's very easy to forget where you left off.
Overall the car looks decent, I suppose, in that it is all one color and fairly glossy. I'm having second thoughts about color sanding the clear coat. One, I don't want to run the risk of cutting into the base coat and two, it would only make the flaws in the base coat more pronounced.
Bravo for doing all that. Gotta ask though, why not go with a custom colour since you repainted the entire car? Not that there is anything wrong with going with silver.
Thanks M4One.Originally Posted by M4One ↑Bravo for doing all that. Gotta ask though, why not go with a custom colour since you repainted the entire car? Not that there is anything wrong with going with silver.
Primarily, I love silver but the main reason is that I didn't want to have to paint all the jambs, inner doors, under hood, engine bay etc. I have seen some colors that would look amazing on the RS for sure. Most recently was a beautiful root beer brown I saw on one car. I think that if I was repainting though again, I might go for a white. I think white Yari look really great.
Well, basically done. I still need to remove a lot of overspray - mostly from the older attempted repairs/painting I'd done. Also, a few bits of tape in the grille to remove. I have to paint the screen under where the plate goes. I'm afraid I'll have to do that with a paint brush. Tedius, but don't want any black on the new silver.
All the effort and it looks the same except for a couple things: It's all one color but the paint isn't as good as factory, two, there are no more dents and dings.
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
All the effort and it looks the same except for a couple things: It's all one color but the paint isn't as good as factory, two, there are no more dents and dings.
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Great job, what do you mean the paint isn't as good as oem - what did you notice was different?
Looks like you've done an outstanding job there. I've painted a few cars in my time, and I know it takes a lot of hard work and patience. BTW, Toyota's OEM paint is pathetic.
Thanks! Because I didn't sand enough the metallic flake didn't settle uniformly. In certain lighting, you can see the rougher texture. The metallic isn't completely uniform across all panels of the car. I think my spraying is not bad and if I'd had a truly smooth surface, it would have been more uniform and 'flatter', less peel effect. The primer went on quite peely and despite a fair bit of sanding - and it feeling smooth to the touch - it resulted in a somewhat textured base coat in areas.Originally Posted by tmontague ↑Great job, what do you mean the paint isn't as good as oem - what did you notice was different?
Thanks Kimona! From my online readings the Japanese cars have flat (low peel, smooth) paint whereas European cars have more peel purposefully. I like the really flat smooth paint that 'was' on my Yaris before I repainted. I'd be interested in hearing about the cars you painted and your process if you're willing to share.Originally Posted by kimona ↑Looks like you've done an outstanding job there. I've painted a few cars in my time, and I know it takes a lot of hard work and patience. BTW, Toyota's OEM paint is pathetic.
Everything always looks prefect in a picture.
Will be interesting to see if you are now anymore resilient to stone chips. Factory paint chips if you sneeze to close to the vehicle.
Will be interesting to see if you are now anymore resilient to stone chips. Factory paint chips if you sneeze to close to the vehicle.
It does indeed look better in pictures. Not sure about the paint chips. I used a medium solids acrylic urethane clear coat. It's reasonably thick on the front.Originally Posted by WeeYari ↑Everything always looks prefect in a picture.
Will be interesting to see if you are now anymore resilient to stone chips. Factory paint chips if you sneeze to close to the vehicle.
+1 on the great job man! Sorry to hear you ran into some trouble spots, but the photos really make it look like you've done a sharp job - that's gotta be worth at least a 50' job, lol.
As you said, big effort and lots learned - next time you'll be 10 steps ahead; be honest with yourself, you know there will be a next time.. 😉
Keep us posted on the fix-ups when you do them, and thanks for sharing the awesome job you've done, it's been enjoyable to follow.
-- Adam
As you said, big effort and lots learned - next time you'll be 10 steps ahead; be honest with yourself, you know there will be a next time.. 😉
Keep us posted on the fix-ups when you do them, and thanks for sharing the awesome job you've done, it's been enjoyable to follow.
-- Adam
I wish i wasn't on the wrong side of the pond otherwise i'd have you paint Betty. Picture not included in this copy
Sent from my SM-G930F using Tapatalk
Sent from my SM-G930F using Tapatalk
Thanks Adam! I've decided to respray the passenger doors as they are the worst. I'll sand with 600 first and hopefully the clear will sand smooth enough to lay a couple of base coats and 3 clear coats. I have enough material remaining to do that. I will definitely post up the process.Originally Posted by atomic_hoji ↑+1 on the great job man! Sorry to hear you ran into some trouble spots, but the photos really make it look like you've done a sharp job - that's gotta be worth at least a 50' job, lol.
As you said, big effort and lots learned - next time you'll be 10 steps ahead; be honest with yourself, you know there will be a next time.. 😉
Keep us posted on the fix-ups when you do them, and thanks for sharing the awesome job you've done, it's been enjoyable to follow.
-- Adam
I would love to!Originally Posted by zoidberg444 ↑I wish i wasn't on the wrong side of the pond otherwise i'd have you paint Betty. Picture not included in this copy
Sent from my SM-G930F using Tapatalk
Scored a used liftgate for $150.00 today. It will need to be stripped, primed, sanded and painted. Although the clear is flaking off, the liftgate has absolutely no dings or even scrapes. It is 100% rust-free. I think this car was 'decomissioned' very early in its life. I'm going to refinish this off the car and then bolt it on. It came with the factory style spoiler too! Of course I have no use for this as I'll be taking the wing off my old tailgate and putting it on the 'new' one.
If this is the original paint, I'm really getting WeeYari's and Kimona's point that the paint on these cars - at least the clear coat - is a joke. This stuff can't be thicker than a human hair - wow!
Picture not included in this copy
If this is the original paint, I'm really getting WeeYari's and Kimona's point that the paint on these cars - at least the clear coat - is a joke. This stuff can't be thicker than a human hair - wow!
Picture not included in this copy
Thanks for sharing your experience, this is a great thread. You deserve a ton of credit for your hard work. It's inspiring!
Well, I'm definitely getting better at spraying paint. Doing an orientation coat (pulling the gun back and dusting the metallics on immediately after my final med/wet base coat eliminates any mottling and my base coat is super smooth and uniform with the metallic flake all in the same direction. I am learning tons. There are parts of the car that look much better than factory with almost perfect metallics and a deeper, glossier look due to more clear being applied. However, everytime I do some painting something goes wrong. This time, two things...
1) I had sanded the clear coat down with 600 grit to spray the new base coat. In one tiny spot, not realizing, I had sanded slightly through the clear right at the front of the door, lower style line. The base coat immediately wrinkled. I let the base dry, carefully wet sanded it and then laid about 4 dust coats of base with 15 minutes between each. Then, I laid down my final medium/wet coats. This solved the problem. You cannot tell now that there was any wrinkling.
2) My gun must have had some silicone or other contamination. I got many fish eyes. I am hoping to be able to sand these out and then do a quick flow coat of clear in a couple of days.
I am thoroughly enjoying this learning process. I am definitely improving but there is still much to learn and there are so many variables to contend with.
Picture not included in this copy
Picture not included in this copy
1) I had sanded the clear coat down with 600 grit to spray the new base coat. In one tiny spot, not realizing, I had sanded slightly through the clear right at the front of the door, lower style line. The base coat immediately wrinkled. I let the base dry, carefully wet sanded it and then laid about 4 dust coats of base with 15 minutes between each. Then, I laid down my final medium/wet coats. This solved the problem. You cannot tell now that there was any wrinkling.
2) My gun must have had some silicone or other contamination. I got many fish eyes. I am hoping to be able to sand these out and then do a quick flow coat of clear in a couple of days.
I am thoroughly enjoying this learning process. I am definitely improving but there is still much to learn and there are so many variables to contend with.
Picture not included in this copy
Picture not included in this copy
Thanks very much, bradbowl. It's been fun and it's definitely helping me improve my patience. 😁Originally Posted by bradbowl ↑Thanks for sharing your experience, this is a great thread. You deserve a ton of credit for your hard work. It's inspiring!