I had jdm RS tail lights on my Yaris (which are for sale shortly) and I'm going back to stock with car. Putting my old original stock tails back on. I got the passenger side wired up right because on the diy I followed it and I has pictures of the passenger connector. Its been a while since I put those rs tails on and I didn't plan on changing back so my dumb ass didn't snap a pic of connector the way it was. If anyone could either take a pic of connector on the driver side in stock order on stock tails it would be most appreciated. If anyone does and can't take a pic could you just tell me color of each wire from left to right?
2007 Yaris HB driver side tail light connector wiring order. Please help
5 posts · 4,175 views
Replies 4
No one wants to help?
Just for you, sir.
1 attachment not included in this copy
What "claw" needs pressed in what direction w/ what tool to open this dang connector w/o yanking on wires?!
Note: Idiotic routing of the pigtail to the upper bulb (parking-brake dual filament large-banjo bulb) shown in miniature circle drawings in owners manual, and described in factory shop manual for 2007 Yaris 2-door Hatchback North-America... Mind of Toyota--Module Madness.
(Edit: above comments from passenger side bulb-replacement adventure. The connector looks like one in the two photos of the above post .)
Note: Idiotic routing of the pigtail to the upper bulb (parking-brake dual filament large-banjo bulb) shown in miniature circle drawings in owners manual, and described in factory shop manual for 2007 Yaris 2-door Hatchback North-America... Mind of Toyota--Module Madness.
(Edit: above comments from passenger side bulb-replacement adventure. The connector looks like one in the two photos of the above post .)
Hey dogsridewith. Here is the link with pics from rage2 that should answer your question. Also on post #67 of that link is how I removed the pins without yanking the wires.