600RRgoalOriginal postPhilly · Aug 6, 2017#1Hi all,
I drive my car a LOT on long distance 1,000+ mile trips and always wondered what I'd do if I blew a tire at 2:30 AM in the middle of nowhere on a Saturday night. That being said, I want a full size spare for these trips.
My Yaris is the first car I've owned that has TPMS. Aside from buying a steel wheel and a tire, what other components do I need? Do I need an actual TPMS sensor to keep the TPMS light from coming on the dash? Anything else?
Thanks guys.
Replies 8
bronsinnj · Aug 6, 2017#2Full size spare Will not fit where your doughnut spare goes. Yes you'll need a sensor for the steel wheel spare if you get one or the light will go on. I have steel wheel spares in the shed for both our cars But there's no way to carry one.
IllusionXBrossard, QC · Aug 6, 2017#3You will have to sync the extra sensor with the car anyways. Spare don't need the sensor AFAIK.
Sent from my SM-G930W8 using Tapatalk
hotracer_05Rowlett, TX · Aug 7, 2017#4Do you have a hatchback or sedan? i was able to fit a full size spare in my hatchback
bronsinnj · Aug 7, 2017#5 Originally Posted by
hotracer_05 ↑ Do you have a hatchback or sedan? i was able to fit a full size spare in my hatchback
And the cover fits flush? 🤷
Pretty sure my full size spare won't fit in there. Could I be wrong!? 🤷
600RRgoalThread starterPhilly · Aug 7, 2017#6Thanks guys.
I have a hatchback and was planning on throwing the spare in the back. I always have the back seats folded down so there will be plenty of room.
dogsridewithUSAnotCA · Aug 7, 2017#7There's a thread here w/ photos on removing the spot welded stamping that props up the front of the spare...I believe reason involved fitting a larger spare.
hotracer_05Rowlett, TX · Aug 7, 2017#8Yeah you can fit a full spare
Originally Posted by
hotracer_05 ↑ One of the original tires was in decent shape, and since i bought the car without a spare i decided to just use it (not a fan of doughnuts anyways). The full size tire wont fit where the old spare goes without removing the riser piece on the top. This is tac welded to the car, so before doing this you need to make sure you don't have any emotional attachments to that doughnut. I simple took a big hammer and beat it out...but you can definitely grind away the tac welds. then simply fill the holes in and ta da! full size spare room
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
SirDigbyDenver, Colorado · Sep 20, 2017#9yeah, plate removes easy. inflation kits are super gross! don't use those!