Whats up guys! Picked up a 2012 Yaris 5 speed hatchback as a daily. This is it next to my 2012 Tundra. Didn't see a section for builds, so if this is in the wrong place please move 😁
Picture not included in this copy
First thing i did was start looking for all weather mats (my feet get dirty). I had heard of 3D mats and the pictures looked pretty good, so decided to give them a try. Definitely impressed with the quality
Picture not included in this copy
Wasn't too happy with the little cargo light in the back, so decided to add leds wired to a switch
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Also blacked out the badges with some bedliner 😁
Picture not included in this copy
Added an Intake, definitely like the sound difference. Not a huge fan of the AFE using the battery bracket though
Picture not included in this copy
Decide to start doing some minor stuff to the interior. Picked up this shift knob and suede boot on ebay for cheap. The boot was universal, so i ended up cutting and restitching it up at work
Picture not included in this copy
Painted some of the dash pieces to match the Yellow
Picture not included in this copy
WHEELS AND TIRES!!!! I went with some 15" Vision 426 Cross in Black and for tires 195/60R15 Falken ZE950. I went with a bigger size because I'm still getting used to having to drive around stuff vs just running it over 😁
Also got a Viper 3105V alarm installed along with tinting the windows
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
One of the original tires was in decent shape, and since i bought the car without a spare i decided to just use it (not a fan of doughnuts anyways). The full size tire wont fit where the old spare goes without removing the riser piece on the top. This is tac welded to the car, so before doing this you need to make sure you don't have any emotional attachments to that doughnut. I simple took a big hammer and beat it out...but you can definitely grind away the tac welds. then simply fill the holes in and ta da! full size spare room
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
WOOHOO!! Added a new Android head unit and kicker hideaway sub!
Went with the hideaway because even though i was really tempted to throw a crazy set up in there, i convinced myself i needed the space more. Put it on the floor because I have taken the back seat out and don't plan on putting it back in. It doesn't sound bad, but definitely doesn't compare with the normal amp/sub set up. I'm ok with it though, more info on the head unit here
Ebay Android HU Install
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Added a DC Strut Bar today :) pretty happy camper, need to get a rear sway bar now
Picture not included in this copy
An aluminum oil cap....because it was 5 bucks on ebay lol
Picture not included in this copy
Did some more Interior work, Added 4 Kicker 6.5" Speakers and wrapped all the gray diamond plate trim pieces in our Defender Cloth (I work at The Seat Shop)
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Rear TRD Sway Bar came in today!!!! Piece of cake to install, didn't even have to jack the car up lol
Picture not included in this copy
Picture not included in this copy
LET THERE BE LIGHT!!! I might lose some of yall with this one, but added some leds for a rally look. Also they will be very helpful when im out driving in the middle of no where. For details I did a small write up over in the cosmetic section
Picture not included in this copy
Picture not included in this copy
Got some performance updates :D
Got my hands on a Golden Eagle Intake Manifold and a 1ZZ Throttle body, did the coolant bypass on the throttle body and working on adjusting the idle screw. Gonna need a new coupler for the intake, I don't know how people got their originals to work
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Whited out the letters on the tires and added a Tanabe Exhaust. Extremely pleased with both
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
First thing i did was start looking for all weather mats (my feet get dirty). I had heard of 3D mats and the pictures looked pretty good, so decided to give them a try. Definitely impressed with the quality
Picture not included in this copy
Wasn't too happy with the little cargo light in the back, so decided to add leds wired to a switch
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Also blacked out the badges with some bedliner 😁
Picture not included in this copy
Added an Intake, definitely like the sound difference. Not a huge fan of the AFE using the battery bracket though
Picture not included in this copy
Decide to start doing some minor stuff to the interior. Picked up this shift knob and suede boot on ebay for cheap. The boot was universal, so i ended up cutting and restitching it up at work
Picture not included in this copy
Painted some of the dash pieces to match the Yellow
Picture not included in this copy
WHEELS AND TIRES!!!! I went with some 15" Vision 426 Cross in Black and for tires 195/60R15 Falken ZE950. I went with a bigger size because I'm still getting used to having to drive around stuff vs just running it over 😁
Also got a Viper 3105V alarm installed along with tinting the windows
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
One of the original tires was in decent shape, and since i bought the car without a spare i decided to just use it (not a fan of doughnuts anyways). The full size tire wont fit where the old spare goes without removing the riser piece on the top. This is tac welded to the car, so before doing this you need to make sure you don't have any emotional attachments to that doughnut. I simple took a big hammer and beat it out...but you can definitely grind away the tac welds. then simply fill the holes in and ta da! full size spare room
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
WOOHOO!! Added a new Android head unit and kicker hideaway sub!
Went with the hideaway because even though i was really tempted to throw a crazy set up in there, i convinced myself i needed the space more. Put it on the floor because I have taken the back seat out and don't plan on putting it back in. It doesn't sound bad, but definitely doesn't compare with the normal amp/sub set up. I'm ok with it though, more info on the head unit here
Ebay Android HU Install
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Added a DC Strut Bar today :) pretty happy camper, need to get a rear sway bar now
Picture not included in this copy
An aluminum oil cap....because it was 5 bucks on ebay lol
Picture not included in this copy
Did some more Interior work, Added 4 Kicker 6.5" Speakers and wrapped all the gray diamond plate trim pieces in our Defender Cloth (I work at The Seat Shop)
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Rear TRD Sway Bar came in today!!!! Piece of cake to install, didn't even have to jack the car up lol
Picture not included in this copy
Picture not included in this copy
LET THERE BE LIGHT!!! I might lose some of yall with this one, but added some leds for a rally look. Also they will be very helpful when im out driving in the middle of no where. For details I did a small write up over in the cosmetic section
Picture not included in this copy
Picture not included in this copy
Got some performance updates :D
Got my hands on a Golden Eagle Intake Manifold and a 1ZZ Throttle body, did the coolant bypass on the throttle body and working on adjusting the idle screw. Gonna need a new coupler for the intake, I don't know how people got their originals to work
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Whited out the letters on the tires and added a Tanabe Exhaust. Extremely pleased with both
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy