dengOriginal postMI · Jul 23, 2017#1Davis (Dabuu) here with a new username because I wasn't feeling the old one anymore. 😆
I like the idea of building my Yaris to B-spec rules, even if it doesn't show up as an eligible MY in SCCA's GCR. Since I'm not planning to compete, some of my mods will not be legal, hence the wannabe.
I figure this will be a good way to compare my times with legit B-spec-ers.
Cusco Street Zero w/ Center Lock Pillowball Mounts.
Picture not included in this copy F: 7kg/mm / 392lb/in
R: 5kg/mm / 280lb/in
Front dampners are not adjustable, but the rears are 14 way adjustable, already not legal for the class haha. I also like that Cusco supplies a linear spring for the rear. 🎉
Picture not included in this copy Picture not included in this copy The rear has been adjusted to max low since I took this picture.
The center lock idea is pretty cool by getting rid of all the rubber bushings up front, but the aluminum teeth for the spanner wrench to lock onto are so weak that the edges start snapping off when torquing down to 80nM. 👎 Should've been made out of steel in my opinion.
Picture not included in this copy Previously, I had Konig Dial-Ins in 15x7 +35. They were nice and light, but subjectively they looked okay, and I didn't like cleaning all 12 spokes. So I got rid of half the spokes:
Picture not included in this copy Kosei K1's 15x7 +30 in Miata Spec, ~13.5lbs a wheel. They are hubcentric to the Yaris, easy to clean, and they clear the SE's larger front brake calipers. My rule of thumb is, if the wheels clear a Miata w/ Sport Brakes, they'll clear SE brakes lol.
The wheels are wrapped in 205/50R15 Dunlop Direzza Star Spec ZII. The rears do rub, so I will need to roll them in the future.
I still have a lot of stuff to do before I get back on track, but I'm aiming for TRD Cup @ Streets of Willow on August 19th. 👍
Update 08/31/17 2017 Yaris SE 5MT
2502lbs w/ driver and half tank
Engine: - Stock
Drivetrain: - TRD Quickshifter
- TRD SS Clutch Line
- TRD Black Duracon Shift Knob
Suspension: - Cusco Street Zero F: 7kg R: 5kg
- Cusco Front Pillowball Mounts
- Bloodsports Racing Rear Beam Collar
- Custom Front Camber Lock
Brakes: - TRD SS Brake Lines
- ATE Type 200 Racing Fluid
- Front Akebono Ceramic Pads
- Front Centric Blank Rotors
- Reae OEM Pads and Rotors
Wheels: - 15x7 +30 Kosei Racing K1 (Miata Spec, 54.1 Hubcentric)
- 205/50R15 Dunlop Direzza DZII
Exterior: - Cusco Front Tow Hook
- Okuyama Rear Tow Hook
Interior: - TRD Door Stabilizers
- G's Aluminum Clutch and Brake Pedal Covers
- SRP MK2 MR2 Accel Pedal
- CG Lock
- Willow Spring's Dirt as Ballast.
Replies 83
Kaotic LazagnaCentral Valley, CA · Jul 23, 2017#2Nice. And lol about the name switch. Too bad I don't know anything about auto-x/track rules.
When the dampers go out on Dory, I'll most likely get coilovers. I like the Tein Flex Z I have on the FR-S, so I might get a set for Dory in the future.
dengThread starterMI · Jul 24, 2017#3Thanks!
The Yaris' list of allowed modifications is puny compared to the Honda Fit's and Mazda2's lol, so I'll be adding things that aren't legal for the Yaris, but are for the heavy hitters. 👍
MugenRepCentral Pennsylvania · Jul 24, 2017#4Wow! Love the build and can't wait to see what's next.
ern-dizCA all day · Jul 25, 2017#5 Originally Posted by
MugenRep ↑ Wow! Love the build and can't wait to see what's next.
+1
Jason@SportsCarDebary, FL · Jul 25, 2017#6 Originally Posted by
deng ↑ Davis (Dabuu) here with a new username because I wasn't feeling the old one anymore. 😆
I like the idea of building my Yaris to B-spec rules, even if it doesn't show up as an eligible MY in SCCA's GCR. Since I'm not planning to compete, some of my mods will not be legal, hence the wannabe.
I figure this will be a good way to compare my times with legit B-spec-ers.
Cusco Street Zero w/ Center Lock Pillowball Mounts.
F: 7kg/mm / 392lb/in
R: 5kg/mm / 280lb/in
Front dampners are not adjustable, but the rears are 14 way adjustable, already not legal for the class haha. I also like that Cusco supplies a linear spring for the rear. 🎉
The rear has been adjusted to max low since I took this picture.
The center lock idea is pretty cool by getting rid of all the rubber bushings up front, but the aluminum teeth for the spanner wrench to lock onto are so weak that the edges start snapping off when torquing down to 80nM. 👎 Should've been made out of steel in my opinion.
Previously, I had Konig Dial-Ins in 15x7 +35. They were nice and light, but subjectively they looked okay, and I didn't like cleaning all 12 spokes. So I got rid of half the spokes:
Kosei K1's 15x7 +30 in Miata Spec, ~13.5lbs a wheel. They are hubcentric to the Yaris, easy to clean, and they clear the SE's larger front brake calipers. My rule of thumb is, if the wheels clear a Miata w/ Sport Brakes, they'll clear SE brakes lol.
The wheels are wrapped in 205/50R15 Dunlop Direzza Star Spec ZII. The rears do rub, so I will need to roll them in the future.
I still have a lot of stuff to do before I get back on track, but I'm aiming for TRD Cup @ Streets of Willow on August 19th. 👍
The GCR line for the Yaris needs to be corrected and updated - no one at TMS cared, and no one was racing one, so its listing never got fixed. Should be 2007-2011 hatch, and then a separate listing for the 2012+ hatch, and one for 2007-2012 sedan. If they dont list them that way the wheelbase spec will be wrong. Also, if someone wanted to run an SE in BS they would need a separate spec line due to the difference in brake size - expect that to come with a weight hit due to "brake advantage" over the standard model.
I just put the pillowballs on snug with the spanner, and used loctite, they have been fine.
heeroyuy01195Florida · Jul 25, 2017#7looking good! Subscribed
dengThread starterMI · Jul 26, 2017#8Thanks guys, glad you're enjoying the build. Hopefully there will be exciting track content that's worth posting. :)
I figured no one at TMS cares haha, and looking at some of the b spec races, they're dominated mostly by Fits and Minis. I wonder how the field would've looked if Toyota did support b spec.
Anyway, no worries here, I'm just out there to have a good time. The b spec times will be my motivation to push a little harder.
dengThread starterMI · Jul 29, 2017#9So I fabbed up some camber locking plates out of 1-1/4"x1/4" 1018 CRS flat bar that I had laying around.
I'm running Toyota's 3 dot camber bolt (I don't like the cam types), and wanted to prevent any positive camber slip when on track. Got the idea from the Suzuki Swift tuner, R's Racing. 🙇
Painted with some BBQ grill paint I had laying around.
Picture not included in this copy, on Flickr
Picture not included in this copy, on Flickr
Picture not included in this copy, on Flickr
The locking bolt happens to line up perfectly with the little plateau on the knuckle. Very interesting. :)
Picture not included in this copy, on Flickr
I hope it holds up at the track. 🤣
dengThread starterMI · Jul 31, 2017#10Today, with the help of some buddies, I was able to install my TRD brake and clutch lines.
I never had any problems with ATE's fluid with my previous cars. It's nice having enough people to pump brakes, and watch the fluid level. Last thing you want is to run that reservoir dry, and then having to bench bleed the master.
Picture not included in this copy, on Flickr
Picture not included in this copy, on Flickr
Picture not included in this copy, on Flickr
It's hard to tell in this picture, but the rear uses 2 sets of brake lines. One for the torsion beams pivot point (towards the front), and one to the caliper.
Picture not included in this copy, on Flickr
The clutch line was surprisingly the most difficult to replace, only because the brake fluid just kept running down as we were scrambling to thread in the 10mm nut. Make sure you have plenty of fluid in the reservoir!
Picture not included in this copy, on Flickr
I also installed the Blood Sports Rear Torsion Beam Collars.
Picture not included in this copy, on Flickr
Since we had to disconnect the brake line at the beams pivot point, this allowed us to lower the beam from the vehicle. We used 2 jacks on each side, we didn't want to support the beam in the middle and risk bending it. The fit was spot on! The collars are made of delrin if anyone was wondering, good stuff!
Picture not included in this copy, on Flickr
Initial impression with city driving; I didn't feel any difference with braking or pushing in the clutch. I did just replace 10k mile hoses lol.
I can't wait to see how these work on track.
ern-dizCA all day · Jul 31, 2017#11👍👍
tmontagueCaledonia Ont. · Jul 31, 2017#12Enjoying the thread so far. How do you find the torsion beam collars?
dengThread starterMI · Jul 31, 2017#13I was searching around google.co.jp and ended up finding SR Factory Blood Sports website,
http://www.bloodsports.jp/product-group/10 (would love their coilovers <3) I asked
www.rhdjapan.com if they could get their hands on it, and they emailed me back a couple days later with the link to purchase.
Go to
www.rhdjapan.com and search ncp131. It shows that it's for the ncp131, but it should fit the ncp91 since the torsion beams are the same.
TRD japan also sells a set, but I wasn't sure how I was going to get my hands on it. Nengun has them listed, but I never delt with them.
I haven't noticed any extra NVH from them, I do notice less wiggle in the rear while spiritedly driving the on ramp this morning.
tmontagueCaledonia Ont. · Jul 31, 2017#14What was the price of the bloodsports?
Did you sell your bilsteins when you got your cusco co's? If so how do you like the Cusco's compared to the B8's?
Jason@SportsCarDebary, FL · Jul 31, 2017#15That is pretty slick. 👍
Originally Posted by
deng ↑ So I fabbed up some camber locking plates out of 1-1/4"x1/4" 1018 CRS flat bar that I had laying around.
I'm running Toyota's 3 dot camber bolt (I don't like the cam types), and wanted to prevent any positive camber slip when on track. Got the idea from the Suzuki Swift tuner, R's Racing. 🙇
Painted with some BBQ grill paint I had laying around.
Picture not included in this copy, on Flickr
Picture not included in this copy, on Flickr
Picture not included in this copy, on Flickr
The locking bolt happens to line up perfectly with the little plateau on the knuckle. Very interesting. :)
Picture not included in this copy, on Flickr
I hope it holds up at the track. 🤣
dengThread starterMI · Jul 31, 2017#16I wanna say it was like $200 after the middle man fees and shipping from Japan at the time.
No comparison. I love the coilovers because they are much stiffer than the spring/strut combo. No progressive springs here. :) The shocks are valved to match the spring rates. It's surprisingly compliant. Although it is stiff, it absorbs bumps around the city pretty well, it's not jarring your teeth on your grocery run. The misses doesn't complain about it. :D
Thanks Jason, here's to my welds holding up! 🍻
ZettaiOishiiAnaheim, CA · Aug 2, 2017#17Out of curiosity, have you done any power mods or is it allowed in your class that you'll be competing in or does the car really need any for autox? I didn't want to start a new thread about it and it's kinda hard to find info on people modding the current gen (MY15~ unless it's purely a facelift and entirely same powertrain). I've been really considering getting a new/newer yaris to potentially compete in as I do love these things and wish we got the old RS and the new Gazoo racing version.
dengThread starterMI · Aug 3, 2017#18Thirty-Nine, thanks! I love how aggressive the front of the '15+ are, big reason why I bought one. ;) Although, with the new '18 models coming out, I want to do an '18 front bumper swap, so I can run the Modellista front spoiler <3.
Picture not included in this copy
ZO, no power mods as of right now, engine and exhaust is all factory. I'm focusing more on suspension, and driver. When I feel the need later on, I'll add them. As of right now, the only power mod allowed for the Yaris is a K&N CAI. and yes, it's the same powertrain from '07-'18 in the U.S. which is great, engines are readily available at the salvage yards. :)
But I hear ya, I wish we recieved the RS. the '12+ SE is the closest thing we got minus the 4.3 fd lsd trans. So close. :(
ZettaiOishiiAnaheim, CA · Aug 3, 2017#19@deng have you ever felt like you truly needed more power at autox? Lightweight underpowered cars are basically my first choice to drive around in, but I've never gotten a chance to drive one myself mainly because I don't want it to want to make me want to buy one immediately lol. I do keep waiting to see if they were going to end up adopting the mazda 2 skyactiv, but it is nice to have so many of those engines available to be picked.
dengThread starterMI · Aug 3, 2017#20I havent autocrossed the Yaris yet, but definitely want to. The only time I feel like I need more power is when I'm overtaken by a Skyline GTR at Buttonwillow's main straight lol. I had a cai, dc headers, and a tanabe catback at the time. Turbo, s/c, 2zr swap would help for the torque alone, but if I wanted real power, I would buy another car. I'm happy with the stock power.
Also, just realized that we're neighbors.
ZettaiOishiiAnaheim, CA · Aug 3, 2017#21Hah, yeah I hear ya on just buying a different car. There's a reason as to why we drive underpowered cars.
Heh I'll keep an eye out for your car on the streets :) I'm definitely liking how koseis look on your yaris. I drive a whiteout 13 FRS lowered on TE37vs, but on stockers at the moment cause my wires are showing lol
dengThread starterMI · Aug 16, 2017#22ZO, TE37v's are gangster as fuck, my goal is to get some TE37 Sonics in 15x7 +35 sometime in the future. :)
Finally got my alignment at renowned alignment specialist West End Alignment in Gardena, CA. They are known for their track set ups. Forum after forum, you'll see nothing but praise. I finally ponied up the cash to get their legendary alignment, corner balance, and customer service. I called in for an appointment, and was lucky to get in the next day, it usually takes a week or two.
Darin and Chris of West End were straight forward about what they believed in, and that was: Function. But, they still wanted my input on ride height in order to understand what I wanted, and if it wasn't possible due to suspension geometry angle, they would let me know. They did a thorough interview with me about my car; what I use it for, what I'm looking for, what I want out of it. We all decided on an aggressive street set up for attacking the local canyons and track days. This was my favorite part of the whole experience.
I sat in the car for a little less than 2 hours as they adjusted the ride height, front camber, and front toe, all while keeping me in the loop of what they're doing. They raised the front and driver's rear from Cusco's factory setting. Even though I was bottomed out on the rear height adjuster, the car was lower on the driver's side, so they had to compensate. They checked the rear alignment and front caster. And silly me, I left the ABS bracket loose on the driver's rear from my brake line install, it was embarassing, but Chris resecured it for me.
Corner Balance was done with a little more than half a tank of gas, and the; spare tire, jack, and tools were removed from the car.
I totally recommend Darin and Chris if you live in SoCal and looking for a track alignment. I can't wait to see how these settings perform on track! It feels great on the street when I was driving home from work, I was actually surprised. I love the way my car now sits. I won't be winning any parking lot style points, but the driver's front gap without me in the car screams: Function.
3 attachments not included in this copy
dengThread starterMI · Aug 17, 2017#23Just found out that TRD Cup is actually on Sept 2nd, not this Saturday. :(
I'm itching to get back on track! Old video at Buttonwillow Raceway Park:
https://youtu.be/WEWMzvWPb_A Not my fastest lap, but it sure was a fun ending 👍
and attached is an old haiku that I made expressing an average trackday in the Yaris. 😛
1 attachment not included in this copy
ern-dizCA all day · Aug 17, 2017#24Ha, love it!
dengThread starterMI · Aug 18, 2017#25Hey ern, let me know when you guys do another photoshoot. :)
ern-dizCA all day · Aug 18, 2017#26 Originally Posted by
deng ↑ Hey ern, let me know when you guys do another photoshoot. :)
No doubt! Are there any days of the week that work best for you? Romario and I threw that last one together after work one day during the week, but if weekends work better for you, we can plan it a little better and easily make it happen.
dengThread starterMI · Aug 25, 2017#27Weekends work better for me. :)
Updated first post with vehicle's current specifications.
dengThread starterMI · Sep 3, 2017#28It was a hot day yesterday at Streets of Willow in Rosamond, CA. We were experiencing temperatures up to 107f/41c through half of the day, so it was miserable, and I didn't capture any footage because my dashcam overwritten itself, oh well. The last two sessions were cooler at 98f/36c, and everyone was starting to have fun!
SoW recently recieved a new layer of top coat, it wasn't a repave, but it was slick during the first session, it gradually became better as more tire compound was was embedded into the pavement.
Last time I ran the CCW configuration was when I first tracked the Yaris last November, and it was completely stock, I ran a 1:41.236 then.
My goal was to get into the 1:36 range, but with ambient temp hovering around 107f, I was consistently running 1:40s, which was a total bummer knowing I'm only 1 second faster lol. The last session was the coolest session of the day at 98f, and I was able to put down a 1:35.926, good enough for 2nd place in TRD Cup's Limited Class.
2 attachments not included in this copy
atomic_hojiKincardine, ON, Canada · Sep 3, 2017#29Nicely done! 👍
41C sounds .. terrible. lol
-- Adam
dengThread starterMI · Sep 7, 2017#30Thanks hoji!
It was terrible, we were all sitting under the canopy asking ourselves why we even came to the track lol.
Since I didn't have any video, I was looking at the Analysis portion of my Harry's Lap Timer, specifically my fastest lap in 98f weather. I'm surprised to see that the Yaris actually made it to 90mph down the main straight! And I'm not sure how accurate the power graph is, but I made 69whp 🤣
Anyways, I thought it was pretty neat.
2 attachments not included in this copy
JRHPNGFrom NZ, currently working in Papua New Guinea · Sep 7, 2017#31Have just purchased an NCP91 from Japan. Most of the TRD and other parts appear out of production. Good to know more of the new model is similar parts for suspension etc..
dengThread starterMI · Sep 7, 2017#32Enjoy! 👍
DarkShadowFoxMassachusetts · Sep 7, 2017#33 Originally Posted by
deng ↑ So I fabbed up some camber locking plates out of 1-1/4"x1/4" 1018 CRS flat bar that I had laying around.
I'm running Toyota's 3 dot camber bolt (I don't like the cam types), and wanted to prevent any positive camber slip when on track. Got the idea from the Suzuki Swift tuner, R's Racing. 🙇
Painted with some BBQ grill paint I had laying around.
Picture not included in this copy, on Flickr
Picture not included in this copy, on Flickr
Picture not included in this copy, on Flickr
The locking bolt happens to line up perfectly with the little plateau on the knuckle. Very interesting. :)
Picture not included in this copy, on Flickr
I hope it holds up at the track. 🤣
part #?
dengThread starterMI · Sep 7, 2017#34of?
DarkShadowFoxMassachusetts · Sep 7, 2017#35 Originally Posted by
ZettaiOishii ↑ Out of curiosity, have you done any power mods or is it allowed in your class that you'll be competing in or does the car really need any for autox? I didn't want to start a new thread about it and it's kinda hard to find info on people modding the current gen (MY15~ unless it's purely a facelift and entirely same powertrain). I've been really considering getting a new/newer yaris to potentially compete in as I do love these things and wish we got the old RS and the new Gazoo racing version.
15 is just a bumper facelift and some mild body lines and interior tweaks. otherwise the 2013 mounting points I think.
just import the GRMN parts from japan part. its not cheap but what project car is \D:/
DarkShadowFoxMassachusetts · Sep 7, 2017#36dengThread starterMI · Sep 7, 2017#37lol you quoted my camber lock post and then link to the rear collars. fwiw, bloodsports won't ship it, rhdjapan worked with me to import it. Now it's on their site, search ncp131
DarkShadowFoxMassachusetts · Sep 7, 2017#38 Originally Posted by
deng ↑ lol you quoted my camber lock post and then link to the rear collars. fwiw, bloodsports won't ship it, rhdjapan worked with me to import it. Now it's on their site, search ncp131
oh Im soreh Im tired.
Sent from my LG-H918 using Tapatalk
dengThread starterMI · Sep 7, 2017#39I wouldn't advise installing these if it's your daily. For the most part they don't make any noise. It's when you start driving on rough roads that the NVH arises. Since the collars now limit left to right movement (canceling out Toyota's built in toe correction [your rear alignment should be spot on before installing these, or you'll be dog tracking]), you'll be hearing alot of popping/creaking from the torsion beam. It'll sound like your car is broken.
DarkShadowFoxMassachusetts · Sep 7, 2017#40 Originally Posted by
deng ↑ I wouldn't advise installing these if it's your daily. For the most part they don't make any noise. It's when you start driving on rough roads that the NVH arises. Since the collars now limit left to right movement (canceling out Toyota's built in toe correction [your rear alignment should be spot on before installing these, or you'll be dog tracking]), you'll be hearing alot of popping/creaking from the torsion beam. It'll sound like your car is broken.
.
dengThread starterMI · Sep 7, 2017#41That question has no relevance in my thread.
DarkShadowFoxMassachusetts · Sep 7, 2017#42 Originally Posted by
deng ↑ That question has no relevance in my thread.
it doesnt.
Sent from my LG-H918 using Tapatalk
dengThread starterMI · Oct 20, 2017#43Track day prep.
Thank you OE front pads for your hard life of 15k miles and 5 track days. I ran them down to ~3mm.
I think the SE OE front pads did pretty well for track days. The only time I had any issue with brake fade was late braking the back straight at Streets of Willow.
I ordered Winmax W3 pads all around about 4 weeks ago, I was told that it would take 3 to 4 weeks as they are made to order, but I never received an update. I called the distributor, and the order either never made it to Winmax, or... it was never submitted. 🤷 I have to wait another 3-4 weeks.
Back up plan, I ordered Akebono Proact Ceramic pads with Centric blank rotors. The Akebono's came with new hardware which was nice.
At the last track day, I'm guessing that I boiled the fluid because my pedal has felt mushy since. Flushing with fresh ATE stiffened up the pedal. I might have to go Motul if this happens again.
Big Willow is tomorrow and the forecast shows a cool 23C and sunny day!
2 attachments not included in this copy
ern-dizCA all day · Oct 20, 2017#44Would you believe me if I said I'm still on my original pads and rotors?
dengThread starterMI · Oct 20, 2017#45Totes! It all depends on how you drive after all. :)
tmontagueCaledonia Ont. · Oct 20, 2017#46Deng, those are the rotors in running with my hawk hps. They've held up great on 2 track days which was over 300km of lapping.
The hps pads are pretty good but they get pretty dusty after a hard track day and now even dd. It's a trade off for a better pad.
dengThread starterMI · Oct 20, 2017#47Yeah these rotors are great! I've been running them on my past track cars. When I first started doing track days way back when, I opted for slotted rotors, and those didn't last long. Ended up developing cracks. I stuck with blank rotors ever since.
Not many U.S. companies make performance pads for the SE which is a bummer.
dengThread starterMI · Oct 22, 2017#48I had a great time at Willow Spring's big track yesterday, even though it was only for 2 sessions lol.
The car felt great with the Cusco coilovers. With the engine/exhaust back to stock, the car was very quiet lol. I really need a 4.3 lsd soon. :)
Anywho here's me going off at ~98mph at T9.
https://youtu.be/QPAQvmTqxOY I'm fine, and the car is fine. Thankfully, I only debeaded the front left tire. I'm surprised that there aren't any broken or bent parts on the Yaris, even the Kosei's were okay just scraped up. We inflated the tire, rotated it to the rear, and I called it a day. I survived T9, no need to keep pushing it. 😆 I got home safe and sound driving the speed limit.
ArmstrongRacing was out here with his co drivers too! It was good seeing him again. Last I talked to him he was putting down some fast times! 🤘
Even though I had only 2 sessions, I was able to beat my PB of 1:49.559. I ran a 1:45.531. I'm pretty happy with the time, especially with a stock engine and full interior car.
Sorry for the wind noise, this was recorded on a gopro hero2 lol.
https://youtu.be/ZuBPyFgJIm0 I figured I would have been in the 1:44s if I didn't lift on T9....but yeah, I should've lifted. 😛
Jason@SportsCarDebary, FL · Oct 22, 2017#49Sideways across the track, then into the dirt, you are lucky that did not roll. :(
Did you have data to pull your mph and lap times?
B Spec record is a 1:44.3, considering you are on street tires (I assume you still are) you were clicking off pretty good times.
dengThread starterMI · Oct 22, 2017#50That was the thought that kept running through my head, "don't roll, don't roll!" Looking back at the video, if only I managed to drive off straight it wouldn't have been so dramatic and I could've went straight into the pits. *facepalm*
I do have the data, and I'm trying figure out how to do the overlay. 9 min worth of data for a 30 sec clip, the software doesn't allow me to choose what part of the data to overlay. It needs all 9 minutes of video I'm guessing, then I trim from there.
1 attachment not included in this copy