Yarisworld Archive

Led headlights?

104 posts · 67,383 views · page 1 of 3

Yaris709Original postNewfoundland · Jan 12, 2017#1
Just wondering if the newer type led's with the heat sink on back will work in the h4 yaris headlights? Since the h4's have that rubber seal around the back of the bulb. And a good bright reputable led if anyone knows what brand is good!

Replies 103

Yaris874Nahant M.A · Jan 12, 2017#2
Originally Posted by Yaris709 ↑
Just wondering if the newer type led's with the heat sink on back will work in the h4 yaris headlights? Since the h4's have that rubber seal around the back of the bulb. And a good bright reputable led if anyone knows what brand is good!
Picture not included in this copy I got this one on ebay super bright

Sent from my SM-G935T using Tapatalk
tarkusYYZ · Jan 12, 2017#3
No problems fitting it into the Yaris' cramped space?

Sent from my LG G2 with CM13 using Tapatalk
Yaris874Nahant M.A · Jan 12, 2017#4
Originally Posted by tarkus ↑
No problems fitting it into the Yaris' cramped space?

Sent from my LG G2 with CM13 using Tapatalk
Wat year my 07 H.B FIT GOOD

Sent from my SM-G935T using Tapatalk
Yaris709Thread starterNewfoundland · Jan 13, 2017#5
Originally Posted by Yaris874 ↑
Picture not included in this copy I got this one on ebay super bright

Sent from my SM-G935T using Tapatalk
What's the name of these listed as on ebay?
Yaris874Nahant M.A · Jan 13, 2017#6
Originally Posted by Yaris709 ↑
What's the name of these listed as on ebay?
Picture not included in this copyPicture not included in this copy

Sent from my SM-G935T using Tapatalk
thebarberGrand Rapids, MI · Jan 13, 2017#7
i had them in my echo...no issues. H4's in my wifes old Kia Soul, too....no issues

www.facebook.com/kitchenerHID
Yaris709Thread starterNewfoundland · Jan 13, 2017#8
How much brighter than the stock halogens were they?
Yaris874Nahant M.A · Jan 13, 2017#9
Originally Posted by Yaris709 ↑
How much brighter than the stock halogens were they?
I take a picture tonight and post it
Originally Posted by thebarber ↑
i had them in my echo...no issues. H4's in my wifes old Kia Soul, too....no issues

www.facebook.com/kitchenerHID

Sent from my SM-G935T using Tapatalk
kevinj93Sydney, Australia · Jan 13, 2017#10
Even more important that brightness - how do these affect the light pattern? Most LED replacements I have seen for other globes have the LEDs covering a different area to the original globe filaments. This can significantly change the pattern of light output. Worst possibility with the headlights is to dazzle other drivers and possibly cause an accident.

I look forward to seeing the photos of the light output.
Yaris874Nahant M.A · Jan 13, 2017#11
Picture not included in this copy

Low


Picture not included in this copy

High

Picture not included in this copy


High
Picture not included in this copy

Low

Picture not included in this copy

Low


Picture not included in this copy


Low


Picture not included in this copy


High


Picture not included in this copy


Low


Picture not included in this copy

High

I hope this works

Sent from my SM-G935T using Tapatalk
kevinj93Sydney, Australia · Jan 13, 2017#12
Thanks. Great photos. I will have to get some of these and try them.
tmontagueCaledonia Ont. · Jan 13, 2017#13
I'd love to see how they look from an incoming direction. Up close they seem like they have a decent cut off but from any kind of distance they shed a lot of bright light up top even on low beams.

I'm all for brighter lights but in almost every case I've seen anything brighter than oem needs a projector or else they blind other drivers and tell "I do half assed mods to look good but screw other drivers"

They may actually not be bad at all tough to tell though without seeing them in person. They are much better than oem.

So many cars in my area throw in led's or hid's and skip on projectors to "save money" and they make it impossible to see.
NYC-SENYC · Jan 14, 2017#14
Originally Posted by tmontague ↑
I'd love to see how they look from an incoming direction. Up close they seem like they have a decent cut off but from any kind of distance they shed a lot of bright light up top even on low beams.

I'm all for brighter lights but in almost every case I've seen anything brighter than oem needs a projector or else they blind other drivers and tell "I do half assed mods to look good but screw other drivers"

They may actually not be bad at all tough to tell though without seeing them in person. They are much better than oem.

So many cars in my area throw in led's or hid's and skip on projectors to "save money" and they make it impossible to see.
+1
tarkusYYZ · Jan 14, 2017#15
Headlamp bulbs are a PITA to replace in a Yaris, and you basically have to take the bumper/cowl partly off. So I would like to only use LED replacements from now on, but just with regular brightness. Is that not possible?

Sent from my LG G2 with CM13 using Tapatalk
kimonaHuntington Bch, CA · Jan 14, 2017#16
Originally Posted by kevinj93 ↑
Even more important that brightness - how do these affect the light pattern? Most LED replacements I have seen for other globes have the LEDs covering a different area to the original globe filaments. This can significantly change the pattern of light output. Worst possibility with the headlights is to dazzle other drivers and possibly cause an accident.
+1
invader166Langley, BC · Jan 14, 2017#17
Originally Posted by tmontague ↑
I'd love to see how they look from an incoming direction. Up close they seem like they have a decent cut off but from any kind of distance they shed a lot of bright light up top even on low beams.

I'm all for brighter lights but in almost every case I've seen anything brighter than oem needs a projector or else they blind other drivers and tell "I do half assed mods to look good but screw other drivers"

They may actually not be bad at all tough to tell though without seeing them in person. They are much better than oem.

So many cars in my area throw in led's or hid's and skip on projectors to "save money" and they make it impossible to see.
I totally agree with this. I'm currently using these LED bulbs, which are simmilar:(http://www.hidvisioncanada.ca/produc...ed-driver.html) and let me tell you, it's darn near impossible to get a proper cut-off with them.

Check out the picture below of how it looks onwards. Note: Driver side needs allignment. Any DIY guides on how to do this? 🙁

Picture not included in this copy

This thing is, reflector housings were never designed for brighter output. The cut-off will always be washy. The same thing will happen if you change your OEM bulbs with brighter halogen bulbs.

If you trully want a poper cut-off, then a projector retrofit is the only real way to go.👍
malibuguyWestminster, MD · Jan 15, 2017#18
Do a proper HID projector retrofit. Anything other then a HALOGEN bulb in a housing designed around a HALOGEN filament and the way it produces light is going to be a downgrade and reduces safety for you and other motorist. You basically paying to downgrade the car.

My favorite halogen bulb that I ran in my sedan prior to HID projectors was the Osram Nightbreaker. Powerbulbs.com sells em for a great price and I absolutely loved them.

However nothing beats properly engineered HID projectors with excellent cut off and more even light beam
invader166Langley, BC · Jan 15, 2017#19
Originally Posted by malibuguy ↑
Do a proper HID projector retrofit. Anything other then a HALOGEN bulb in a housing designed around a HALOGEN filament and the way it produces light is going to be a downgrade and reduces safety for you and other motorist. You basically paying to downgrade the car.

My favorite halogen bulb that I ran in my sedan prior to HID projectors was the Osram Nightbreaker. Powerbulbs.com sells em for a great price and I absolutely loved them.

However nothing beats properly engineered HID projectors with excellent cut off and more even light beam
🙇🙇🙇 Amin!
ExiwolfmanWasaga beach · Jan 16, 2017#20
Originally Posted by malibuguy ↑
Do a proper HID projector retrofit. Anything other then a HALOGEN bulb in a housing designed around a HALOGEN filament and the way it produces light is going to be a downgrade and reduces safety for you and other motorist. You basically paying to downgrade the car.

My favorite halogen bulb that I ran in my sedan prior to HID projectors was the Osram Nightbreaker. Powerbulbs.com sells em for a great price and I absolutely loved them.

However nothing beats properly engineered HID projectors with excellent cut off and more even light beam
Sure one can ...but can be a pain in the ass , I have tried hid kit and it was OK but do to our light assembly it was hard to adjust .
Now with the LEDs I have installed it's perfect no cut off just a nice bright area Infront plus fit like a glove with no modifications .
So, so far LED lights are in my opinion best setup with out doing anything extra , only thing I still have to do is to raise them a bit since I have not done any adjustments after running HIDs so the low beam is bit low .

Sent from my SM-G935F using Tapatalk
ExiwolfmanWasaga beach · Jan 16, 2017#21
Picture not included in this copyPicture not included in this copyPicture not included in this copy

From the front first pic ,2nd low ,3rd high beam

Sent from my SM-G935F using Tapatalk
kevinj93Sydney, Australia · Jan 16, 2017#22
Hmm, there doesn't appear to be the normal sharp cutoff towards oncoming traffic that H4 lights normally have. Do those LEDs have a partial shield on the low beam like a normal H4 globe?
ExiwolfmanWasaga beach · Jan 16, 2017#23
Originally Posted by kevinj93 ↑
Hmm, there doesn't appear to be the normal sharp cutoff towards oncoming traffic that H4 lights normally have. Do those LEDs have a partial shield on the low beam like a normal H4 globe?
Picture not included in this copy

Sent from my SM-G935F using Tapatalk
kevinj93Sydney, Australia · Jan 16, 2017#24
Yes, I can see the shield in there to control the light pattern.

Thanks for the photos.
ExiwolfmanWasaga beach · Jan 16, 2017#25
Originally Posted by kevinj93 ↑
Yes, I can see the shiled in there to control the light pattern.

Thsnks for the photos.
Np Picture not included in this copy

Sent from my SM-G935F using Tapatalk
IllusionXBrossard, QC · Jan 16, 2017#26
Oh I gotta try one of these out.

I am still using my 10years old HID kit... Philips bulbs and BMW ballasts.

Sent from my SM-G930W8 using Tapatalk
ExiwolfmanWasaga beach · Jan 16, 2017#27
Originally Posted by IllusionX ↑
Oh I gotta try one of these out.

I am still using my 10years old HID kit... Philips bulbs and BMW ballasts.

Sent from my SM-G930W8 using Tapatalk
Will not be as bright unless u get a better kit lots to choose from for me this works great,plus no cut off and waterproof ...Easy install .

Sent from my SM-G935F using Tapatalk
thebarberGrand Rapids, MI · Jan 16, 2017#28
Originally Posted by Yaris709 ↑
How much brighter than the stock halogens were they?
Currently 4800lumens vs halogen @ maybe 1200lumens
ExiwolfmanWasaga beach · Jan 16, 2017#29
Originally Posted by thebarber ↑
Currently 4800lumens vs halogen @ maybe 1200lumens
Mine are 8000L so guess way brighter than stock and it's noticeable for sure just I would not say as bright as hid but that couldl also be to phycological effect cos there is no cut off so even light as to cut and spot .

Sent from my SM-G935F using Tapatalk
malibuguyWestminster, MD · Jan 16, 2017#30
I give up smh
ExiwolfmanWasaga beach · Jan 16, 2017#31
Originally Posted by malibuguy ↑
I give up smh
Just get some ...Cheap of Amazon lol way brighter and better than stock lol

Sent from my SM-G935F using Tapatalk
IllusionXBrossard, QC · Jan 17, 2017#32
Originally Posted by Exiwolfman ↑
Will not be as bright unless u get a better kit lots to choose from for me this works great,plus no cut off and waterproof ...Easy install .

Sent from my SM-G935F using Tapatalk
What you mean no cut off?
My hid is pretty much a near perfect cut off compared to projectors.

Sent from my SM-G930W8 using Tapatalk
ExiwolfmanWasaga beach · Jan 17, 2017#33
Originally Posted by IllusionX ↑
What you mean no cut off?
My hid is pretty much a near perfect cut off compared to projectors.

Sent from my SM-G930W8 using Tapatalk
The LEDs I got have no cut off ...Look at pics I posted

Sent from my SM-G935F using Tapatalk
WeeYariGeorgetown, Ontario, Canada · Jan 17, 2017#34
No cut off...👎
ExiwolfmanWasaga beach · Jan 17, 2017#35
Originally Posted by WeeYari ↑
No cut off...Picture not included in this copy
Why ....I like it no stupid cut off line in the middle where up is dark down is light

Sent from my SM-G935F using Tapatalk
tmontagueCaledonia Ont. · Jan 17, 2017#36
Originally Posted by WeeYari ↑
No cut off...👎
Agreed, negligent
Yaris874Nahant M.A · Jan 17, 2017#37
Originally Posted by Exiwolfman ↑
Why ....I like it no stupid cut off line in the middle where up is dark down is light

Sent from my SM-G935F using Tapatalk
+1

Sent from my SM-G935T using Tapatalk
tmontagueCaledonia Ont. · Jan 17, 2017#38
Originally Posted by Exiwolfman ↑
Why ....I like it no stupid cut off line in the middle where up is dark down is light

Sent from my SM-G935F using Tapatalk
I have projectors for my HID's with a proper cut off and I properly adjusted the headlight housing for height. I have no issues with there being no light above the cut off, I can see way more than just the road below/in front of me.

I also don't blind other drivers and I've had family members drive oncoming to my car as well as in front of me and both times they have reported having absolutely no blidness from my lights.

Costs me slightly more money and took longer to install by a few hours, but I now have much brifgtee lights than oem that look way better even when they aren't on and I don't cause a hazard to other drivers just so I can have brighter lights.

With the high beams on (projector flipped away) they are damn blinding and hurt your eyes.
ExiwolfmanWasaga beach · Jan 17, 2017#39
Originally Posted by tmontague ↑
I have projectors for my HID's with a proper cut off and I properly adjusted the headlight housing for height. I have no issues with there being no light above the cut off, I can see way more than just the road below/in front of me.

I also don't blind other drivers and I've had family members drive oncoming to my car as well as in front of me and both times they have reported having absolutely no blidness from my lights.

Costs me slightly more money and took longer to install by a few hours, but I now have much brifgtee lights than oem that look way better even when they aren't on and I don't cause a hazard to other drivers just so I can have brighter lights.

With the high beams on (projector flipped away) they are damn blinding and hurt your eyes.
Well I'm glad you like your setup and it works for you, most ppl will not have the means or knowledge to retrofit lights.
For my application it was simple plug and play and yes I have them adjusted correctly but honestly with all the new car and HIDs plus LEDs as OEM I could careless if I blind someone cos I get it all the time .
So far this setup works at least for me best with stock Yaris light assembly and no cut off is a major plus in my are where we have hills and curvey roads .

Just my 2 cents on that .

Sent from my SM-G935F using Tapatalk
NYC-SENYC · Jan 17, 2017#40
No cutoff=dangerous and selfish. Being blinded by others' lights DOES cause crashes.
tmontagueCaledonia Ont. · Jan 17, 2017#41
Originally Posted by Exiwolfman ↑
Well I'm glad you like your setup and it works for you, most ppl will not have the means or knowledge to retrofit lights.
For my application it was simple plug and play and yes I have them adjusted correctly but honestly with all the new car and HIDs plus LEDs as OEM I could careless if I blind someone cos I get it all the time .
So far this setup works at least for me best with stock Yaris light assembly and no cut off is a major plus in my are where we have hills and curvey roads .

Just my 2 cents on that .

Sent from my SM-G935F using Tapatalk
I won't argue with you that the no cut off helps in the roads up in your neck of the woods. I've driven them enough at night in bad conditions and was glad for my HID high beams - which is just hid's w/ not cut off. And yes your LED's are an easy and simple plug and play, no argument there.

My issue is exactly that, if you do not possess the knowledge (nor willing to learn it) or slight extra cash to add the extra lumens properly than it shouldn't be done.

I've been blinded many times by these half assed retrofits and depending on the type of roads/conditions im driving in it can become an issue of safety quite quickly.

The arguments in favor of these installs are always the same selfish stance ignorant to how those actions affect other people on the road. If it was for pure off road puposes with no other traffic I would easily understand, but to simply ignore the effects to others because of the convenience to oneself is selfish no matter what the opinion is.

To each their own, but more of these half assed installs on the roads will be ruining it for the people who have properly installed HID's with projectors so that they can improve appearance and actually see better. It won't be hard to ban non oem spec'd lights down the road unfortunately.
Kaotic LazagnaCentral Valley, CA · Jan 17, 2017#42
I'll just give my 2 cents. I just installed Morimoto Elite HIDs (5000k) into my Yaris hatch because I hated the OEM halogens. I really had to aim them down to prevent the light scatter from blinding oncoming traffic (I knew I had to do this before hand). Comparing it to my FR-S with OEM HID projectors (replaced the OEM Osram bulbs with Osram CBI bulbs, more around 5500k with same lumens as the ~4300k OEM), the Yaris has no where near the throw or the spread as the FR-S.

I thought about doing retrofits (as I did with my previous Yaris sedan), but I just didn't want to deal with possible condensation again (but to be fair, I opened the sedan's headlights like 10 times due to various headlight mods). In the future, if I ever decide on going with retrofits again, I'll be getting TRS's mini H1 projectors. They have a better road illumination than my FR-S OEM HID projectors (probably partly because of the D4S bulbs that the FR-S uses).

https://www.theretrofitsource.com/co...1-stage-3.html
Kaotic LazagnaCentral Valley, CA · Jan 17, 2017#43
And if you don't want to take apart the headlights to do a projector retrofit (but can some how remove that shield/cover thing through the bulb opening), you can use these: https://www.amazon.com/Rover-Project...ini-projectors

I would have went with them, but they're built in HID bulbs, and are 6000k (wouldn't want anything more than 5000k unless they're Osram CBI). I wouldn't use anything less than Morimoto bulbs for HIDs, but that's just me.
tmontagueCaledonia Ont. · Jan 17, 2017#44
Fwiw i only had condesation on one or m'y headlights after m'y original install when i tried reusing thé oem sealant. I then went To Lowes and bought à proper sealant that stays flexible and since then have had no issues in all types of weather and temperatures.

Imo if you don't want to deal with properly sealing them or the potential headache then don't do the mod, or pay for someone else to do it. Or like you did, manually point them down so they don't blind others - however this ends up leading to poor light patterns like you stated which brings me back to my previous point of do it properly or not at all
ExiwolfmanWasaga beach · Jan 17, 2017#45
Originally Posted by NYC-SE ↑
No cutoff=dangerous and selfish. Being blinded by others' lights DOES cause crashes.
Really now ...Have you look at the pics I posted I guess not !
Actually no cut of is safer anyway u look at it and with proper alignment it does not blind ppl in actually I have yet anyone high beam me unlike with my HIDs and cut off.
And as for crashes ... to bright light, maybe we should remove all new cars with OEM LEDs and HIDs cos they are always way to dangerous as you say.

It's just funny how ppl like to state there bloody opinion with out any fact's ...O and here will attach a pic just so you can see what I'm talking about.
Picture not included in this copy
That is low beam
Picture not included in this copy
And high beam

Anyways be safe

Sent from my SM-G935F using Tapatalk
yarisugiハワイ · Jan 17, 2017#46
Picture not included in this copy
Kaotic LazagnaCentral Valley, CA · Jan 17, 2017#47
Originally Posted by tmontague ↑
Fwiw i only had condesation on one or m'y headlights after m'y original install when i tried reusing thé oem sealant. I then went To Lowes and bought à proper sealant that stays flexible and since then have had no issues in all types of weather and temperatures.

Imo if you don't want to deal with properly sealing them or the potential headache then don't do the mod, or pay for someone else to do it. Or like you did, manually point them down so they don't blind others - however this ends up leading to poor light patterns like you stated which brings me back to my previous point of do it properly or not at all
Don't get me wrong, they're still better than the halogen bulbs for two reasons, better spread and better (to me) color temp. They can have the same spread, and the 5000k color temp will help me see better (noticed objects tend to reflect the light of cooler colors than warmer colors).

My other post was just to confirm that PnP HIDs aren't going to be anywhere near HID projectors.

I don't think I started having condensation issues until around the 6th time I opened the head lights. I even got new sealant tape from TRS, and that didn't solve the issue, so I gave up. Lol
Kaotic LazagnaCentral Valley, CA · Jan 17, 2017#48
Exiwolfman, OEM HIDs and LED projectors were designed around how each type of bulb distributes light (each type has a different dispersion). For example, HID and LED projectors don't have "squirrel finders" that will be a source of a lot of stray light in halogen projectors with HIDs installed in them.
ExiwolfmanWasaga beach · Jan 17, 2017#49
Originally Posted by Kaotic Lazagna ↑
Exiwolfman, OEM HIDs and LED projectors were designed around how each type of bulb distributes light (each type has a different dispersion). For example, HID and LED projectors don't have "squirrel finders" that will be a source of a lot of stray light in halogen projectors with HIDs installed in them.
In all honesty idk no more ... Question was asked I answered but for some ppl that was a selfish of me and how I like my lights so ty for ur insight on lights.
I for now will stick with my cheap Amazon LEDs cos they work well and better than stock .

Have a good one

Sent from my SM-G935F using Tapatalk
Kaotic LazagnaCentral Valley, CA · Jan 17, 2017#50
Originally Posted by Exiwolfman ↑
In all honesty idk no more ... Question was asked I answered but for some ppl that was a selfish of me and how I like my lights so ty for ur insight on lights.
I for now will stick with my cheap Amazon LEDs cos they work well and better than stock .

Have a good one

Sent from my SM-G935F using Tapatalk
My reply was in regards to you saying "remove all OEM HID and LEDs" earlier.